QB64 Phoenix Edition
Laser Blades - Printable Version

+- QB64 Phoenix Edition (https://qb64phoenix.com/forum)
+-- Forum: QB64 Rising (https://qb64phoenix.com/forum/forumdisplay.php?fid=1)
+--- Forum: Code and Stuff (https://qb64phoenix.com/forum/forumdisplay.php?fid=3)
+---- Forum: Programs (https://qb64phoenix.com/forum/forumdisplay.php?fid=7)
+---- Thread: Laser Blades (/showthread.php?tid=1857)

Laser Blades - bplus - 07-24-2023

An alternate way to draw Laser Bolts:
Code: (Select All)
Option _Explicit
_Title "Laser Blades" 'b+ 2023-07-24 another way to do laser beams

Const NBolts = 50 ' max number of Bolt slots available, just like bullet science
Const PulseLength = 150 ' length of light pulses as they travel down BoltLine

Type BoltType 'see NewBolt for description of these variables
    As Single x1, y1, r1, dx, dy, dr, d, ang, frames, frame, active, speedX, speedY, x, y, r
    As _Unsigned Long k
End Type
Dim Shared Bolts(1 To NBolts) As BoltType

Dim Shared bk
Dim As Long mx, my, i, lpc, blastedShip, r

Randomize Timer
Screen _NewImage(1200, 700, 32)
_ScreenMove 50, 20

makeBackground
Do
    Cls
    _PutImage , bk, 0
    If blastedShip Then
        DrawShip 600, 350, &HFF00CC66
        For r = blastedShip To 1 Step -2
            FCirc 600, 350, r, _RGB32(5 * (50 - r), 5 * (50 - r), 0, 20)
        Next
        blastedShip = blastedShip + 2
        If blastedShip > 50 Then blastedShip = 0
    Else
        DrawShip 600, 350, &HFF00CC66 ' bplus signature space ship, for rent :)
    End If
    ' fire off some more bolts at the ship from the screen corners!
    If lpc = 0 Then
        If Rnd < .7 Then NewBolt 0, 0, 1, 600, 350, 20, 3, &HCCFF0000
    ElseIf lpc = 30 Then
        If Rnd < .7 Then NewBolt _Width - 1, 0, 1, 600, 350, 25, 2, &HCC007700
    ElseIf lpc = 60 Then
        If Rnd < .7 Then NewBolt _Width - 1, _Height - 1, 1, 600, 350, 30, 3, &HCCFF00FF
    ElseIf lpc = 90 Then
        If Rnd < .7 Then NewBolt 0, _Height - 1, 1, 600, 350, 35, 2, &HCC008888
    End If
    lpc = (lpc + 1) Mod 120 ' loopscounter every 30 shoot from a corner
    For i = 1 To NBolts
        If Bolts(i).active Then DrawBolt (i) ' draws the bolts still active
    Next '                                     according to what frame they are on
    ' collision detection  blow up when ship is hit
    For i = 1 To NBolts
        If Bolts(i).active Then
            If _Hypot(Bolts(i).x - 600, Bolts(i).y - 350) < 20 + Bolts(i).r Then
                If Bolts(i).x1 <> 600 And Bolts(i).y1 <> 350 Then ' oops watch out for friendly fire!!!
                    If blastedShip = 0 Then blastedShip = 1
                    Bolts(i).active = 0
                End If
            End If
        End If
    Next
    While _MouseInput: Wend
    mx = _MouseX: my = _MouseY
    If _MouseButton(1) Then
        NewBolt 600, 340, 1, mx, my, 25, 10, _RGB32(255, 255, 0, 180)
        _Delay .25
    End If
    _Display
    _Limit 60
Loop Until _KeyDown(27)


Sub NewBolt (x1, y1, r1, x2, y2, r2, ppfSpeed, k~&) ' sets up for the DrawBolt Sub
    'x1, y1, r1 = location and radius at start of beam
    'x2, y2, r2 = target location and radius at beam end
    'ppfSpeed = how many pixels per frame in main loop  to transverse
    Dim i
    For i = 1 To NBolts
        If Bolts(i).active = 0 Then
            Bolts(i).x1 = x1 ' start x, y, radius
            Bolts(i).y1 = y1
            Bolts(i).r1 = r1
            Bolts(i).active = 1 ' bolt is activated
            Bolts(i).dx = x2 - x1 ' drawing the bolt line and thickness
            Bolts(i).dy = y2 - y1 ' as it changes from x1, y1, r1 to x2, y2, r2
            Bolts(i).dr = r2 - r1
            Bolts(i).d = _Hypot(Bolts(i).dx, Bolts(i).dy) ' distance of the bolt line
            Bolts(i).frames = Int(Bolts(i).d / ppfSpeed) + 1 ' divide that distance by pulse = PulseLength
            Bolts(i).frame = 1 ' set the frame you are on to locate the pulse in drawing
            Bolts(i).ang = _Atan2(y2 - y1, x2 - x1)
            Bolts(i).speedX = ppfSpeed * Cos(Bolts(i).ang)
            Bolts(i).speedY = ppfSpeed * Sin(Bolts(i).ang)
            Bolts(i).x = x1 ' track leading x, y, r of current bolt for collision detection
            Bolts(i).y = y1
            Bolts(i).r = r1
            Bolts(i).k = k~&
            Exit Sub
        End If
    Next
End Sub

Sub DrawBolt (idx) ' needs FCirc (Fill Circle) routine
    ' This sub draw a pulse of light on the BoltLine from .x1, .y1 on the way to .x2, .y2
    ' The start radius is .r1 and the end radius is .r2 and the pulse is thinned or thickened
    ' as it proceeds down the boltLine.

    'All this is setup in the NewBolt Sub and uses DIM Shared Bolts() as BoltType and Constants
    ' NBolts = max amount of activated Bolt "slots" available and PulseLength the length of
    ' BoltLine sections to draw in each frame.

    Dim d, d2, stepper, oldX, oldY, r2
    ' new lead position for tracking location for collision detection
    Bolts(idx).x = Bolts(idx).x1 + Bolts(idx).speedX * Bolts(idx).frame
    Bolts(idx).y = Bolts(idx).y1 + Bolts(idx).speedY * Bolts(idx).frame
    d = _Hypot(Bolts(idx).x1 - Bolts(idx).x, Bolts(idx).y1 - Bolts(idx).y)
    If Abs(Bolts(idx).dr / PulseLength) < .2 Then stepper = .5 Else stepper = 2
    Bolts(idx).r = Bolts(idx).r1 + d * Bolts(idx).dr / Bolts(idx).d
    If d < PulseLength Then
        Blade Bolts(idx).x1, Bolts(idx).y1, Bolts(idx).r1 + d2 * Bolts(idx).dr / Bolts(idx).d, Bolts(idx).x, Bolts(idx).y, Bolts(idx).r, Bolts(idx).k
        Blade Bolts(idx).x1, Bolts(idx).y1, .4 * Bolts(idx).r1 + d2 * Bolts(idx).dr / Bolts(idx).d, Bolts(idx).x, Bolts(idx).y, .4 * Bolts(idx).r, &H80FFFFFF
    Else
        oldX = Bolts(idx).x + PulseLength * Cos(Bolts(idx).ang - _Pi)
        oldY = Bolts(idx).y + PulseLength * Sin(Bolts(idx).ang - _Pi)
        d2 = _Hypot(Bolts(idx).x1 - oldX, Bolts(idx).y1 - oldY)
        r2 = Bolts(idx).r1 + d2 * Bolts(idx).dr / Bolts(idx).d
        Blade oldX, oldY, r2, Bolts(idx).x, Bolts(idx).y, Bolts(idx).r, Bolts(idx).k
        Blade oldX, oldY, .4 * r2, Bolts(idx).x, Bolts(idx).y, .4 * Bolts(idx).r, &H80FFFFFF
    End If

    Bolts(idx).frame = Bolts(idx).frame + 1 ' update frame number
    If Bolts(idx).frame > Bolts(idx).frames Then Bolts(idx).active = 0 ' job done!
End Sub

Sub Blade (x1, y1, r1, x2, y2, r2, K As _Unsigned Long)
    Dim PD2 As Double
    Dim As Single a, x3, y3, x4, y4, x5, y5, x6, y6, r1d2, r2d2
    PD2 = 1.570796326794897 ' pi/2
    a = _Atan2(y2 - y1, x2 - x1)
    r1d2 = r1 / 2: r2d2 = r2 / 2
    x3 = x1 + r1d2 * Cos(a + PD2)
    y3 = y1 + r1d2 * Sin(a + PD2)
    x4 = x1 + r1d2 * Cos(a - PD2)
    y4 = y1 + r1d2 * Sin(a - PD2)
    x5 = x2 + r2d2 * Cos(a + PD2)
    y5 = y2 + r2d2 * Sin(a + PD2)
    x6 = x2 + r2d2 * Cos(a - PD2)
    y6 = y2 + r2d2 * Sin(a - PD2)
    ftri x6, y6, x4, y4, x3, y3, K
    ftri x3, y3, x5, y5, x6, y6, K
End Sub

'2019-12-16 fix by Steve saves some time with STATIC and saves and restores last dest
Sub ftri (x1, y1, x2, y2, x3, y3, K As _Unsigned Long)
    Dim D As Long
    Static a&
    D = _Dest
    If a& = 0 Then a& = _NewImage(1, 1, 32)
    _Dest a&
    _DontBlend a& '  '<<<< new 2019-12-16 fix
    PSet (0, 0), K
    _Blend a& '<<<< new 2019-12-16 fix
    _Dest D
    _MapTriangle _Seamless(0, 0)-(0, 0)-(0, 0), a& To(x1, y1)-(x2, y2)-(x3, y3)
End Sub

Sub FCirc (CX As Integer, CY As Integer, R As Integer, C As _Unsigned Long)
    Dim Radius As Integer, RadiusError As Integer
    Dim X As Integer, Y As Integer
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub

Sub DrawShip (x, y, colr As _Unsigned Long) 'needs FCirc and FEllipse subs
    Static ls ' tracks the last light position in string of lights
    Dim light As Long, r As Long, g As Long, b As Long
    r = _Red32(colr): g = _Green32(colr): b = _Blue32(colr)
    FEllipse x, y, 6, 15, _RGB32(r, g - 120, b - 100)
    FEllipse x, y, 18, 11, _RGB32(r, g - 60, b - 50)
    FEllipse x, y, 30, 7, _RGB32(r, g, b)
    For light = 0 To 5
        FCirc x - 30 + 11 * light + ls, y, 1, _RGB32(ls * 50, ls * 50, ls * 50)
    Next
    ls = ls + 1
    If ls > 5 Then ls = 0
End Sub

Sub FEllipse (CX As Long, CY As Long, xr As Long, yr As Long, C As _Unsigned Long)
    If xr = 0 Or yr = 0 Then Exit Sub
    Dim h2 As _Integer64, w2 As _Integer64, h2w2 As _Integer64
    Dim x As Long, y As Long
    w2 = xr * xr: h2 = yr * yr: h2w2 = h2 * w2
    Line (CX - xr, CY)-(CX + xr, CY), C, BF
    Do While y < yr
        y = y + 1
        x = Sqr((h2w2 - y * y * w2) \ h2)
        Line (CX - x, CY + y)-(CX + x, CY + y), C, BF
        Line (CX - x, CY - y)-(CX + x, CY - y), C, BF
    Loop
End Sub

Sub makeBackground
    bk = _NewImage(_Width, _Height, 32)
    _Dest bk
    Dim As Long i, stars, horizon
    For i = 0 To _Height
        Line (0, i)-(_Width, i), _RGB32(70, 60, i / _Height * 160)
    Next
    stars = _Width * _Height * 10 ^ -4
    For i = 1 To stars 'stars in sky
        PSet (Rnd * _Width, Rnd * _Height), _RGB32(175 + Rnd * 80, 175 + Rnd * 80, 175 + Rnd * 80)
    Next
    stars = stars / 2
    For i = 1 To stars
        FCirc Rnd * _Width, Rnd * _Height, 1, _RGB32(175 + Rnd * 80, 175 + Rnd * 80, 175 + Rnd * 80)
    Next
    stars = stars / 2
    For i = 1 To stars
        FCirc Rnd * _Width, Rnd * horizon, 2, _RGB32(175 + Rnd * 80, 175 + Rnd * 80, 175 + Rnd * 80)
    Next
    _PutImage , 0, bk
    _Dest 0
End Sub


RE: Laser Blades - bplus - 07-24-2023

Blades are drawn much faster! Here is Bolts Star Burst using Blades:
Code: (Select All)
Option _Explicit
_Title "Bolts Star Burst Blades" ' b+ 2023-07-15  started as Bloom.bas
' 2023-07-16 rename to Bolt from Bloom and comment better and make more generic
' 2023-07-17 Bolts 2: move the bolt down the BoltLine by speed like a bullet.
' 2023-07-18 Bolts 2 tweaks: tweak numbers for more transparency and then more solid little rays.
' But Mark how do we detect hits from lasers, OK added x, y, r to track the current location
' and radius of the laser bolt.
' BoltLine: Imagine a line with a thickness at one end and a different thickness at then other.
' Colored like I imagine a Laser beam yellowish white core with bluish tinge around the edges.
' Now draw sections of that BoltLine according to the frames of display in main loop.
' This is a demo of that!
' Bolts 3 Colorized
' 2023-07-20 Bolts Star Burst
' 2023-07-21 Bolts - Star Burst 2 with more appropriate coloring and background

Const NBolts = 200 ' max number of Bolt slots available, just like bullet science
Const PulseLength = 140 ' length of light pulses as they travel down BoltLine
Type BoltType 'see NewBolt for description of these variables
    As Single x1, y1, r1, dx, dy, dr, d, ang, frames, frame, active, speedX, speedY, x, y, r
    As _Unsigned Long k
End Type
Dim Shared Bolts(1 To NBolts) As BoltType
Dim Shared As Long bk, xmax, ymax
Dim i, minR, d, cx, cy, ang

Randomize Timer
Screen _NewImage(1200, 700, 32)
_ScreenMove 50, 20
xmax = _Width: ymax = _Height
makeBackground
'_PutImage , bk, 0
'End


cx = .5 * _Width: cy = .5 * _Height ' center
minR = _Hypot(cx, cy)
Do
    Cls
    _PutImage , bk, 0
    For i = 1 To NBolts
        If Bolts(i).active Then
            DrawBolt (i) ' draws the bolts still active
        Else
            d = Rnd * minR + 10: ang = Rnd * _Pi(2)
            NewBolt cx, cy, 30, cx + d * Cos(ang), cy + d * Sin(ang), 1, 10, _RGB32(Rnd * 55 + 200, Rnd * 160 + 95, 200, Rnd * 50)
        End If
    Next '                                     according to what frame they are on
    _Display
    _Limit 60
Loop Until _KeyDown(27)


Sub NewBolt (x1, y1, r1, x2, y2, r2, ppfSpeed, k~&) ' sets up for the DrawBolt Sub
    'x1, y1, r1 = location and radius at start of beam
    'x2, y2, r2 = target location and radius at beam end
    'ppfSpeed = how many pixels per frame in main loop  to transverse
    Dim i
    For i = 1 To NBolts
        If Bolts(i).active = 0 Then
            Bolts(i).x1 = x1 ' start x, y, radius
            Bolts(i).y1 = y1
            Bolts(i).r1 = r1
            Bolts(i).active = 1 ' bolt is activated
            Bolts(i).dx = x2 - x1 ' drawing the bolt line and thickness
            Bolts(i).dy = y2 - y1 ' as it changes from x1, y1, r1 to x2, y2, r2
            Bolts(i).dr = r2 - r1
            Bolts(i).d = _Hypot(Bolts(i).dx, Bolts(i).dy) ' distance of the bolt line
            Bolts(i).frames = Int(Bolts(i).d / ppfSpeed) + 1 ' divide that distance by pulse = PulseLength
            Bolts(i).frame = 1 ' set the frame you are on to locate the pulse in drawing
            Bolts(i).ang = _Atan2(y2 - y1, x2 - x1)
            Bolts(i).speedX = ppfSpeed * Cos(Bolts(i).ang)
            Bolts(i).speedY = ppfSpeed * Sin(Bolts(i).ang)
            Bolts(i).x = x1 ' track leading x, y, r of current bolt for collision detection
            Bolts(i).y = y1
            Bolts(i).r = r1
            Bolts(i).k = k~&
            Exit Sub
        End If
    Next
End Sub

Sub DrawBolt (idx) ' needs FCirc (Fill Circle) routine
    ' This sub draw a pulse of light on the BoltLine from .x1, .y1 on the way to .x2, .y2
    ' The start radius is .r1 and the end radius is .r2 and the pulse is thinned or thickened
    ' as it proceeds down the boltLine.

    'All this is setup in the NewBolt Sub and uses DIM Shared Bolts() as BoltType and Constants
    ' NBolts = max amount of activated Bolt "slots" available and PulseLength the length of
    ' BoltLine sections to draw in each frame.

    Dim d, d2, stepper, oldX, oldY, r2
    ' new lead position for tracking location for collision detection
    Bolts(idx).x = Bolts(idx).x1 + Bolts(idx).speedX * Bolts(idx).frame
    Bolts(idx).y = Bolts(idx).y1 + Bolts(idx).speedY * Bolts(idx).frame
    d = _Hypot(Bolts(idx).x1 - Bolts(idx).x, Bolts(idx).y1 - Bolts(idx).y)
    If Abs(Bolts(idx).dr / PulseLength) < .2 Then stepper = .5 Else stepper = 2
    Bolts(idx).r = Bolts(idx).r1 + d * Bolts(idx).dr / Bolts(idx).d
    If d < PulseLength Then
        Blade Bolts(idx).x1, Bolts(idx).y1, Bolts(idx).r1 + d2 * Bolts(idx).dr / Bolts(idx).d, Bolts(idx).x, Bolts(idx).y, Bolts(idx).r, Bolts(idx).k
        Blade Bolts(idx).x1, Bolts(idx).y1, .4 * Bolts(idx).r1 + d2 * Bolts(idx).dr / Bolts(idx).d, Bolts(idx).x, Bolts(idx).y, .4 * Bolts(idx).r, &H80FFFFFF
    Else
        oldX = Bolts(idx).x + PulseLength * Cos(Bolts(idx).ang - _Pi)
        oldY = Bolts(idx).y + PulseLength * Sin(Bolts(idx).ang - _Pi)
        d2 = _Hypot(Bolts(idx).x1 - oldX, Bolts(idx).y1 - oldY)
        r2 = Bolts(idx).r1 + d2 * Bolts(idx).dr / Bolts(idx).d
        Blade oldX, oldY, r2, Bolts(idx).x, Bolts(idx).y, Bolts(idx).r, Bolts(idx).k
        Blade oldX, oldY, .4 * r2, Bolts(idx).x, Bolts(idx).y, .4 * Bolts(idx).r, &H80FFFFFF
    End If

    Bolts(idx).frame = Bolts(idx).frame + 1 ' update frame number
    If Bolts(idx).frame > Bolts(idx).frames Then Bolts(idx).active = 0 ' job done!
End Sub

Sub Blade (x1, y1, r1, x2, y2, r2, K As _Unsigned Long)
    Dim PD2 As Double
    Dim As Single a, x3, y3, x4, y4, x5, y5, x6, y6, r1d2, r2d2
    PD2 = 1.570796326794897 ' pi/2
    a = _Atan2(y2 - y1, x2 - x1)
    r1d2 = r1 / 2: r2d2 = r2 / 2
    x3 = x1 + r1d2 * Cos(a + PD2)
    y3 = y1 + r1d2 * Sin(a + PD2)
    x4 = x1 + r1d2 * Cos(a - PD2)
    y4 = y1 + r1d2 * Sin(a - PD2)
    x5 = x2 + r2d2 * Cos(a + PD2)
    y5 = y2 + r2d2 * Sin(a + PD2)
    x6 = x2 + r2d2 * Cos(a - PD2)
    y6 = y2 + r2d2 * Sin(a - PD2)
    ftri x6, y6, x4, y4, x3, y3, K
    ftri x3, y3, x5, y5, x6, y6, K
End Sub

'2019-12-16 fix by Steve saves some time with STATIC and saves and restores last dest
Sub ftri (x1, y1, x2, y2, x3, y3, K As _Unsigned Long)
    Dim D As Long
    Static a&
    D = _Dest
    If a& = 0 Then a& = _NewImage(1, 1, 32)
    _Dest a&
    _DontBlend a& '  '<<<< new 2019-12-16 fix
    PSet (0, 0), K
    _Blend a& '<<<< new 2019-12-16 fix
    _Dest D
    _MapTriangle _Seamless(0, 0)-(0, 0)-(0, 0), a& To(x1, y1)-(x2, y2)-(x3, y3)
End Sub

Function Plasma~& (r, g, b, cN)
    Plasma~& = _RGB32(223 + 32 * Sin(r * cN), 223 + 32 * Sin(g * cN), 190, 20)
End Function

Sub makeBackground
    bk = _NewImage(xmax, ymax, 32)
    _Dest bk
    Dim As Long i, stars, horizon
    For i = 0 To ymax
        Line (0, i)-(xmax, i), _RGB32(70, 60, i / ymax * 160)
    Next
    stars = xmax * ymax * 10 ^ -4
    For i = 1 To stars 'stars in sky
        PSet (Rnd * xmax, Rnd * ymax), _RGB32(175 + Rnd * 80, 175 + Rnd * 80, 175 + Rnd * 80)
    Next
    stars = stars / 2
    For i = 1 To stars
        FCirc Rnd * xmax, Rnd * ymax, 1, _RGB32(175 + Rnd * 80, 175 + Rnd * 80, 175 + Rnd * 80)
    Next
    stars = stars / 2
    For i = 1 To stars
        FCirc Rnd * xmax, Rnd * horizon, 2, _RGB32(175 + Rnd * 80, 175 + Rnd * 80, 175 + Rnd * 80)
    Next
    _PutImage , 0, bk
    _Dest 0
End Sub

Sub FCirc (CX As Integer, CY As Integer, R As Integer, C As _Unsigned Long)
    Dim Radius As Integer, RadiusError As Integer
    Dim X As Integer, Y As Integer
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub


RE: Laser Blades - SierraKen - 07-27-2023

Hi bplus. Smile This is a cool idea. If I ever get some idea fresh in my mind I might start programming again. I just thought I would pop in and say Hello.

RE: Laser Blades - mnrvovrfc - 07-27-2023

It's been a while. Welcome back. Cool

RE: Laser Blades - SierraKen - 07-27-2023

Thanks Smile

RE: Laser Blades - bplus - 07-27-2023

Yes nice to hear from your again Ken! Smile

RE: Laser Blades - SierraKen - 07-29-2023

Thanks B+. Smile