02-20-2024, 06:25 PM
I've been learning to use the _MEM related commands found in QB64PE and was also in need of the fastest possible image manipulation routines I could create. Here is the result.
First, credit where credit is due. Much of the insight for this code was gathered from the imageprocess.bm library by @RhoSigma found here:
https://qb64phoenix.com/forum/showthread.php?tid=1033
Many of the subroutines below contain code that is reworked from RhoSigma's original code.
I optimized the subroutines below by using _MEM related statements as much as possible without calling on other statements such as _RED32(), _GREEN32(), BLUE32(), and _RGBA32() for example.
My goal is to learn the _MEM related statements and eventually write a tutorial lesson on their use. RhoSigma's code was a great starting point to learn from. If you find other ways to improve on the speed of the subroutines below please share them here.
The ZIP file below contains the source code and the two images needed.
First, credit where credit is due. Much of the insight for this code was gathered from the imageprocess.bm library by @RhoSigma found here:
https://qb64phoenix.com/forum/showthread.php?tid=1033
Many of the subroutines below contain code that is reworked from RhoSigma's original code.
I optimized the subroutines below by using _MEM related statements as much as possible without calling on other statements such as _RED32(), _GREEN32(), BLUE32(), and _RGBA32() for example.
My goal is to learn the _MEM related statements and eventually write a tutorial lesson on their use. RhoSigma's code was a great starting point to learn from. If you find other ways to improve on the speed of the subroutines below please share them here.
The ZIP file below contains the source code and the two images needed.
Code: (Select All)
OPTION _EXPLICIT ' declare those variables!
CONST SWIDTH = 1024 ' screen width
CONST SHEIGHT = 768 ' screen height
CONST DEEP = 1 ' Filter methods
CONST RUSHHOUR = 2
CONST TEXTURE = 3
CONST WOODEN = 4
CONST AVERAGE3 = 5
CONST AVERAGE5 = 6
CONST AVERAGE7 = 7
CONST GAUSS4 = 8
CONST GAUSS8 = 9
CONST NEEDGLASSES = 10
CONST UNSHARPCAM = 11
CONST LOWSHARPEN = 12
CONST MEDIUMSHARPEN = 13
CONST HIGHSHARPEN = 14
CONST MEXICANHAT = 15
CONST KIRSCHN = 16
CONST KIRSCHNW = 17
CONST KIRSCHW = 18
CONST KIRSCHSW = 19
CONST KIRSCHS = 20
CONST KIRSCHSE = 21
CONST KIRSCHE = 22
CONST KIRSCHNE = 23
CONST LAPLACE4 = 24
CONST LAPLACE8 = 25
CONST ROBERTS1 = 26
CONST ROBERTS2 = 27
CONST PREWITT1 = 28
CONST PREWITT2 = 29
CONST SOBEL1 = 30
CONST SOBEL2 = 31
CONST HORIZONTAL = 1 ' horizontal flip
CONST VERTICAL = 2 ' vertical flip
CONST BOTH = 3 ' horizontal and vertical flip
'--------------------------------------------------------------------------------------
'**
'** begin example code
'**
DIM Image AS LONG
DIM AlteredImage AS LONG
DIM c AS INTEGER
DIM d AS INTEGER
DIM s AS STRING
DIM clr AS _UNSIGNED LONG
Image = _LOADIMAGE("sample.png", 32)
SCREEN _NEWIMAGE(SWIDTH, SHEIGHT, 32)
CLS
Display_Image Image, "ORIGINAL IMAGE", 1
c = 0
DO
_LIMIT 60
AlteredImage = _COPYIMAGE(Image)
__Rotate AlteredImage, c
Display_Image AlteredImage, "ROTATED" + STR$(c) + " DEGREES", 0
_FREEIMAGE AlteredImage
c = c + 1
LOOP UNTIL c = 361
Display_Image Image, "ROTATED 0 DEGREES", 1
AlteredImage = _COPYIMAGE(Image)
__Flip AlteredImage, HORIZONTAL
Display_Image AlteredImage, "FLIPPED HORIZONTAL", 1
_FREEIMAGE AlteredImage
AlteredImage = _COPYIMAGE(Image)
__Flip AlteredImage, VERTICAL
Display_Image AlteredImage, "FLIPPED VERTICAL", 1
_FREEIMAGE AlteredImage
AlteredImage = _COPYIMAGE(Image)
__Flip AlteredImage, BOTH
Display_Image AlteredImage, "FLIPPED BOTH HORIZONTAL & VERTICAL", 1
c = 75
d = 1
DO
_LIMIT 15
_FREEIMAGE AlteredImage
AlteredImage = _COPYIMAGE(Image)
__Zoom AlteredImage, c / 100
Display_Image AlteredImage, "RESIZED" + STR$(c) + "%", 0
c = c + d
IF c = 125 THEN d = -d
LOOP UNTIL c = 100 AND d = -1
Display_Image AlteredImage, "RESIZED 100%", 1
_FREEIMAGE AlteredImage
AlteredImage = _COPYIMAGE(Image)
__Negative AlteredImage
Display_Image AlteredImage, "NEGATIVE IMAGE", 1
_FREEIMAGE AlteredImage
AlteredImage = _COPYIMAGE(Image)
__GrayScale AlteredImage
Display_Image AlteredImage, "GRAYSCALE IMAGE", 1
c = -100
d = 1
DO
_LIMIT 30
_FREEIMAGE AlteredImage
AlteredImage = _COPYIMAGE(Image)
__Brightness AlteredImage, c / 100
Display_Image AlteredImage, "BRIGHTNESS LEVEL " + STR$(c) + "%", 0
c = c + d
IF c = 100 THEN d = -d
LOOP UNTIL c = 0 AND d = -1
Display_Image AlteredImage, "BRIGHTNESS LEVEL 0%", 1
c = -100
d = 1
DO
_LIMIT 30
_FREEIMAGE AlteredImage
AlteredImage = _COPYIMAGE(Image)
__Contrast AlteredImage, c / 100
Display_Image AlteredImage, "CONTRAST LEVEL " + STR$(c) + "%", 0
c = c + d
IF c = 100 THEN d = -d
LOOP UNTIL c = 0 AND d = -1
Display_Image AlteredImage, "CONTRAST LEVEL 0%", 1
c = 1
d = 1
DO
_LIMIT 30
_FREEIMAGE AlteredImage
AlteredImage = _COPYIMAGE(Image)
__Gamma AlteredImage, c / 100
Display_Image AlteredImage, "GAMMA CORRECTION " + STR$(c - 100) + "%", 0
c = c + d
IF c = 200 THEN d = -d
LOOP UNTIL c = 100 AND d = -1
Display_Image AlteredImage, "GAMMA CORRECTION 0%", 1
c = 1
d = 1
DO
_LIMIT 5
_FREEIMAGE AlteredImage
AlteredImage = _COPYIMAGE(Image)
__Gaussian AlteredImage, c
Display_Image AlteredImage, "GAUSSIAN BLUR RADIUS" + STR$(c), 0
c = c + d
IF c = 10 THEN d = -d
LOOP UNTIL c = 1 AND d = -1
Display_Image AlteredImage, "GAUSSIAN BLUR RADIUS 1", 1
_FREEIMAGE AlteredImage
c = 1
DO
SELECT CASE c
CASE 1: s = "DEEP (artistic)"
CASE 2: s = "RUSHHOUR (artistic)"
CASE 3: s = "TEXTURE (artistic)"
CASE 4: s = "WOODEN (artistic)"
CASE 5: s = "AVERAGE3 (bluring)"
CASE 6: s = "AVERAGE5 (bluring)"
CASE 7: s = "AVERAGE7 (bluring)"
CASE 8: s = "GAUSS4 (bluring)"
CASE 9: s = "GAUSS8 (bluring)"
CASE 10: s = "NEEDGLASSES (bluring)"
CASE 11: s = "UNSHARPCAM (bluring)"
CASE 12: s = "LOWSHARPEN (sharpen)"
CASE 13: s = "MEDIUMSHARPEN (sharpen)"
CASE 14: s = "HIGHSHARPEN (sharpen)"
CASE 15: s = "MEXICANHAT (sharpen)"
CASE 16: s = "KIRSCHN (edge detect)"
CASE 17: s = "KIRSCHNW (edge detect)"
CASE 18: s = "KIRSCHW (edge detect)"
CASE 19: s = "KIRSCHSW (edge detect)"
CASE 20: s = "KIRSCHS (edge detect)"
CASE 21: s = "KIRSCHSE (edge detect)"
CASE 22: s = "KIRSCHE (edge detect)"
CASE 23: s = "KIRSCHNE (edge detect)"
CASE 24: s = "LAPLACE4 (edge detect)"
CASE 25: s = "LAPLACE8 (edge detect)"
CASE 26: s = "ROBERTS1 (edge detect)"
CASE 27: s = "ROBERTS2 (edge detect)"
CASE 28: s = "PREWITT1 (line detect)"
CASE 29: s = "PREWITT2 (line detect)"
CASE 30: s = "SOBEL1 (line detect)"
CASE 31: s = "SOBEL2 (line detect)"
END SELECT
AlteredImage = _COPYIMAGE(Image)
__Filter AlteredImage, c
Display_Image AlteredImage, s + " FILTER APPLIED", 1
_FREEIMAGE AlteredImage
c = c + 1
LOOP UNTIL c = 32
_FREEIMAGE Image
Image = _LOADIMAGE("colors.png", 32)
c = 0
DO
_LIMIT 5
c = c + 1
IF c = 8 THEN c = 1
SELECT CASE c
CASE 1: clr = _RGB32(255, 0, 0)
CASE 2: clr = _RGB32(0, 255, 0)
CASE 3: clr = _RGB32(255, 255, 0)
CASE 4: clr = _RGB32(0, 0, 255)
CASE 5: clr = _RGB32(255, 0, 255)
CASE 6: clr = _RGB32(0, 255, 255)
CASE 7: clr = _RGB32(255, 255, 255)
END SELECT
AlteredImage = _COPYIMAGE(Image)
__Replace AlteredImage, clr, _RGB32(0, 0, 0)
Display_Image AlteredImage, "REPLACING COLORS", 0
LOCATE (SHEIGHT \ 16) - 1, ((SWIDTH \ 8) - 21) \ 2
PRINT "PRESS ESC KEY TO EXIT";
_DISPLAY
_FREEIMAGE AlteredImage
LOOP UNTIL _KEYDOWN(27)
_FREEIMAGE Image
SYSTEM
'----------------------------
SUB Display_Image (i AS LONG, s AS STRING, p AS INTEGER)
CLS
_PUTIMAGE ((SWIDTH - _WIDTH(i)) \ 2, (SHEIGHT - _HEIGHT(i)) \ 2), i
LOCATE 2, ((SWIDTH \ 8) - LEN(s)) \ 2
PRINT s;
_DISPLAY
IF p THEN
LOCATE (SHEIGHT \ 16) - 1, ((SWIDTH \ 8) - 11) \ 2
PRINT "PRESS A KEY";
_DISPLAY
SLEEP
END IF
END SUB
'----------------------------
'**
'** end example code
'**
'+-----------------------------------------------------------------------------------------------------------+
'| Image manipulation routines by Terry Ritchie 02/20/24 |
'| |
'| An exercise in using QB64PE's _MEM related statements. |
'| |
'| Each subroutine includes links to credit other programmer's work for inspiration. |
'+-----------------------------------------------------------------------------------------------------------+
' _______________________________________________________________________________________________________
'/ \
SUB __Gaussian (i AS LONG, r AS INTEGER) ' __Gaussian |
' ___________________________________________________________________________________________________|___
'/ \
'| Performs a Guassian blur on an image without affecting original alpha values. |
'| |
'| i - the image to work with |
'| r - the radius size of the kernel to build (1 to x) (the larger the radius the slower the process). |
'| |
'| Uses the formula: G(x,y) = (1 / (2 * PI * sigma^2)) * eulers_constant ^ -((x^2 + y^2) / 2 * sigma^2)) |
'| |
'| NOTE: Only works with 32 bit images |
'| |
'| This subroutine draws insight from RhoSigma's imageprocess.bm Image Processing Libray found here: |
'| https://qb64phoenix.com/forum/showthread.php?tid=1033 |
'| |
'| This subroutine also draws insight from Aryaman Sharda's gaussian blur Swift code found here: |
'| https://aryamansharda.medium.com/image-filters-gaussian-blur-eb36db6781b1 |
'\_______________________________________________________________________________________________________/
CONST EULERSCONSTANT = .5772156649015328 ' gamma ( https://en.wikipedia.org/wiki/Euler's_constant )
DIM m AS _MEM ' source image data memory block
DIM tm AS _MEM ' target image data memory block
DIM o AS _OFFSET ' pixel location within image memory block
DIM ko AS _OFFSET ' kernel matrix offset
DIM rb AS _UNSIGNED _BYTE ' red component byte at pixel offset
DIM gb AS _UNSIGNED _BYTE ' green component byte at pixel offset
DIM bb AS _UNSIGNED _BYTE ' blue component byte at pixel offset
DIM ti AS LONG ' target image
DIM h AS INTEGER ' height of source image
DIM w AS INTEGER ' width of source image
DIM s AS DOUBLE ' sigma
DIM kw AS INTEGER ' kernel matrix width and height
DIM sum AS DOUBLE ' sum of kernel matrix values
DIM x AS INTEGER ' pixel horizontal counter
DIM y AS INTEGER ' pixel vertical counter
DIM kx AS INTEGER ' kernel matrix horizontal location
DIM ky AS INTEGER ' kernel matrix vertical location
DIM en AS DOUBLE ' exponent numerator
DIM ed AS DOUBLE ' exponent denominator
DIM ee AS DOUBLE ' exponent expression
DIM dp AS DOUBLE ' exponent denominator multiped by PI
DIM kv AS DOUBLE ' kernel value
DIM rv AS DOUBLE ' new convolved red value
DIM gv AS DOUBLE ' new convolved green value
DIM bv AS DOUBLE ' new convolved blue value
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Create the kernel matrix |
'| ======================== |
'+------------------------------------------+ |
s = r / 2 ' | calculate sigma (min standard deviation baseline) |
IF s < 1 THEN s = 1 ' | sigma must not be lower than 1 |
kw = (2 * r) + 1 ' | ensure odd kernel matrix width |
DIM Kernel(kw, kw) AS DOUBLE ' | create kernel matrix |
sum = 0 ' | reset kernel sum |
ed = 2 * s * s ' | calculate exponent denominator |
dp = _PI * ed ' | exponent denominator times PI |
x = -r ' | start at left side of kernel matrix |
DO ' | begin horizontal matrix counter |
y = -r ' | start at top of kernel matrix |
DO ' | begin vertical matrix counter |
en = x * x + y * y ' | calculate exponent numerator |
ee = EULERSCONSTANT ^ (en / ed) ' | calculate exponent expression |
kv = ee / dp ' | calculate kernel value |
Kernel(x + r, y + r) = kv ' | store value in matrix |
sum = sum + kv ' | add value to overall kernel sum |
y = y + 1 ' | increment vertical counter |
LOOP UNTIL y > r ' | leave when at bottom of matrix |
x = x + 1 ' | increment horizontal counter |
LOOP UNTIL x > r ' | leave when at ride side of matrix |
x = 0 ' | reset horizontal counter |
DO ' | begin horizontal matrix counter |
y = 0 ' | reset vertical counter |
DO ' | begin vertical matrix counter |
Kernel(x, y) = Kernel(x, y) / sum ' | normalize kernel values |
y = y + 1 ' | increment vertical counter |
LOOP UNTIL y > kw ' | leave when at bottom of matrix |
x = x + 1 ' | increment horizontal counter |
LOOP UNTIL x > kw ' | leave when at right side of matrix |
' +----------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Create a target image |
'| ===================== |
'+-------------------+ |
ti = _COPYIMAGE(i) ' | create target image |
w = _WIDTH(ti) ' | get target image width |
h = _HEIGHT(ti) ' | get target image height |
' +---------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Use direct image memory manipulation for speed. |
'| ============================================== |
'+-------------------+ |
m = _MEMIMAGE(i) ' | source image memory block |
tm = _MEMIMAGE(ti) ' | target image memory block |
' +---------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Apply Guassian blur to image |
'| ============================ |
'+--------------------------------------------+ |
y = 0 ' | reset vertical counter |
DO ' | begin vertical image pixel counter |
o = y * w * 4 ' | calculate offset location of pixel |
x = 0 ' | reset horizontal counter |
DO ' | begin horizontal image pixel counter |
rv = 0: gv = 0: bv = 0 ' | reset new convoluted RGB values |
'+------------------------------------+ |
'| Get RGB value of pixel within image |
'| =================================== |
'+----------------------------------------------------------+ |
ky = y - r ' | set matrix row counter |
DO ' | begin matrix row counter |
ko = ky * w * 4 + ((x - r) * 4) ' | matrix offset location |
kx = x - r ' | set matrix column counter |
DO ' | begin matrix column counter|
IF ky >= 0 AND ky < h AND kx >= 0 AND kx < w THEN ' | matrix within image? |
_MEMGET m, m.OFFSET + ko + 2, rb ' | yes, get this pixel red |
_MEMGET m, m.OFFSET + ko + 1, gb ' | get this pixel green |
_MEMGET m, m.OFFSET + ko, bb ' | get this pixel blue |
ELSE ' | no, outside of image |
_MEMGET m, m.OFFSET + o + 2, rb ' | get edge pixel red |
_MEMGET m, m.OFFSET + o + 1, gb ' | get edge pixel green |
_MEMGET m, m.OFFSET + o, bb ' | get edge pixel blue |
END IF ' | |
'+--------------------------------------------------+ |
'| Calculate pixel value for output image |
'| ====================================== |
'+------------------------------------+ |
kv = Kernel(kx - x + r, ky - y + r) ' | get kernal value |
rv = rv + rb * kv ' | convolute red value |
gv = gv + gb * kv ' | convolute green value |
bv = bv + bb * kv ' | convolute blue value |
ko = ko + 4 ' | next pixel offset |
kx = kx + 1 ' | next matrix column |
LOOP UNTIL kx > x + r ' | leave at right side of matrix |
ky = ky + 1 ' | next matrix row |
LOOP UNTIL ky > y + r ' | leave at bottom of matrix |
'+--------------------------------------------+ |
'| Write new pixel to target image |
'| =============================== |
'+-----------------------------------------------------+ |
_MEMPUT tm, tm.OFFSET + o + 2, rv AS _UNSIGNED _BYTE ' | write red to target image |
_MEMPUT tm, tm.OFFSET + o + 1, gv AS _UNSIGNED _BYTE ' | write green to target image |
_MEMPUT tm, tm.OFFSET + o, bv AS _UNSIGNED _BYTE ' | write blue to target image |
'+-----------------------------------------------------+ |
'| Move to next pixel in source image |
'| ================================== |
'+-------------+ |
o = o + 4 ' | next pixel offset |
x = x + 1 ' | next image column |
LOOP UNTIL x = w ' | leave when at right side of image |
y = y + 1 ' | next image row |
LOOP UNTIL y = h ' | leave when at bottom of image |
' +-------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Replace source image with blurred target image |
'| ============================================== |
'+-----------------------------------------------+ |
_MEMCOPY tm, tm.OFFSET, tm.SIZE TO m, m.OFFSET ' | overwrite source image with target image |
_MEMFREE m ' | free source image memory block |
_MEMFREE tm ' | free target image memory block |
_FREEIMAGE ti ' | remove target image from memory |
' +-----------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __Filter (i AS LONG, me AS INTEGER) ' __Filter |
' ___________________________________________________________________________________________________|___
'/ \
'| Applies a pre-defined filter matrix to an image without affecting the origial alpha values. |
'| |
'| i - the image to work with |
'| me - the filter method to apply (1 to 31) |
'| |
'| NOTE: Only works with 32 bit images |
'| |
'| This subroutine draws insight from RhoSigma's imageprocess.bm Image Processing Libray found here: |
'| https://qb64phoenix.com/forum/showthread.php?tid=1033 |
'| |
'| This subroutine is simply a redesign of RhoSigma's excellent ApplyFilter function found in |
'| imageprocess.bm |
'\_______________________________________________________________________________________________________/
DIM w AS INTEGER ' image width
DIM h AS INTEGER ' image height
DIM ti AS LONG ' temporary target image
DIM m AS _MEM ' memory block holding image data
DIM tm AS _MEM ' memory block holding target image data
DIM o AS _OFFSET ' pixel location within memory block
DIM fo AS _OFFSET ' filter offset
DIM x AS INTEGER ' horizontal location of pixel
DIM y AS INTEGER ' vertical location of pixel
DIM fx AS INTEGER ' horizontal filter offset of pixel
DIM fy AS INTEGER ' vertical filter offset of pixel
DIM alph AS _UNSIGNED _BYTE ' alpha value of each pixel
DIM r AS _UNSIGNED _BYTE ' red value of each pixel
DIM g AS _UNSIGNED _BYTE ' green value of each pixel
DIM b AS _UNSIGNED _BYTE ' blue value of each pixel
DIM sr AS LONG ' sum of new red value
DIM sg AS LONG ' sum of new green value
DIM sb AS LONG ' sum of new blue value
DIM f(6, 6) AS INTEGER ' filter matrix
DIM wt AS INTEGER ' weight of individual filter matrix cell
DIM sz AS INTEGER ' kernel size within matrix
DIM s AS INTEGER ' half the kernel size within matrix (radius)
DIM a AS INTEGER ' add
DIM d AS INTEGER ' divide
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Populate the kernel matrix with desired filter method |
'| ===================================================== |
'+---------------+ |
SELECT CASE me ' | which method? |
' +-------------------------------------------------------------------------------+
CASE 1 'DEEP (artistic)
'0 0 0 0 0 0 0
'0 0 0 1 0 0 0
'0 0 0 3 0 0 0
'0 1 3 1 -3 -1 0 Representation of kernel filter matrix being applied
'0 0 0 -3 0 0 0
'0 0 0 -1 0 0 0
'0 0 0 0 0 0 0
sz = 5: a = 0: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 1: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 0: f(2, 3) = 3: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 1: f(3, 2) = 3: f(3, 3) = 1: f(3, 4) = -3: f(3, 5) = -1: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 0: f(4, 3) = -3: f(4, 4) = 0: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = -1: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 2 'RUSHHOUR (artistic)
'0 0 0 0 0 0 0
'0 1 0 0 0 2 0
'0 0 2 0 1 0 0
'0 0 0 2 0 0 0
'0 0 -1 0 -2 0 0
'0 -2 0 0 0 -1 0
'0 0 0 0 0 0 0
sz = 5: a = -150: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 1: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 2: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 2: f(2, 3) = 0: f(2, 4) = 1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 0: f(3, 3) = 2: f(3, 4) = 0: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -1: f(4, 3) = 0: f(4, 4) = -2: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = -2: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = -1: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 3 'TEXTURE (artistic)
'0 0 0 0 0 0 0
'0 0 0 1 0 0 0
'0 0 -1 0 -1 0 0
'0 1 0 1 0 1 0
'0 0 -1 0 -1 0 0
'0 0 0 1 0 0 0
'0 0 0 0 0 0 0
sz = 5: a = 0: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 1: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -1: f(2, 3) = 0: f(2, 4) = -1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 1: f(3, 2) = 0: f(3, 3) = 1: f(3, 4) = 0: f(3, 5) = 1: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -1: f(4, 3) = 0: f(4, 4) = -1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 1: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 4 'WOODEN (artistic)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 -2 0 0 0 0
'0 0 0 5 0 0 0
'0 0 0 0 -2 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 0: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -2: f(2, 3) = 0: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 0: f(3, 3) = 5: f(3, 4) = 0: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 0: f(4, 3) = 0: f(4, 4) = -2: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 5 'AVERAGE3 (bluring)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 1 1 1 0 0
'0 0 1 1 1 0 0
'0 0 1 1 1 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 0: d = 9
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 1: f(2, 3) = 1: f(2, 4) = 1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 1: f(3, 3) = 1: f(3, 4) = 1: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 1: f(4, 3) = 1: f(4, 4) = 1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 6 'AVERAGE5 (bluring)
'0 0 0 0 0 0 0
'0 1 1 1 1 1 0
'0 1 1 1 1 1 0
'0 1 1 1 1 1 0
'0 1 1 1 1 1 0
'0 1 1 1 1 1 0
'0 0 0 0 0 0 0
sz = 5: a = 0: d = 25
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 1: f(1, 2) = 1: f(1, 3) = 1: f(1, 4) = 1: f(1, 5) = 1: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 1: f(2, 2) = 1: f(2, 3) = 1: f(2, 4) = 1: f(2, 5) = 1: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 1: f(3, 2) = 1: f(3, 3) = 1: f(3, 4) = 1: f(3, 5) = 1: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 1: f(4, 2) = 1: f(4, 3) = 1: f(4, 4) = 1: f(4, 5) = 1: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 1: f(5, 2) = 1: f(5, 3) = 1: f(5, 4) = 1: f(5, 5) = 1: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 7 'AVERAGE7 (bluring)
'1 1 1 1 1 1 1
'1 1 1 1 1 1 1
'1 1 1 1 1 1 1
'1 1 1 1 1 1 1
'1 1 1 1 1 1 1
'1 1 1 1 1 1 1
'1 1 1 1 1 1 1
sz = 7: a = 0: d = 49
f(0, 0) = 1: f(0, 1) = 1: f(0, 2) = 1: f(0, 3) = 1: f(0, 4) = 1: f(0, 5) = 1: f(0, 6) = 1
f(1, 0) = 1: f(1, 1) = 1: f(1, 2) = 1: f(1, 3) = 1: f(1, 4) = 1: f(1, 5) = 1: f(1, 6) = 1
f(2, 0) = 1: f(2, 1) = 1: f(2, 2) = 1: f(2, 3) = 1: f(2, 4) = 1: f(2, 5) = 1: f(2, 6) = 1
f(3, 0) = 1: f(3, 1) = 1: f(3, 2) = 1: f(3, 3) = 1: f(3, 4) = 1: f(3, 5) = 1: f(3, 6) = 1
f(4, 0) = 1: f(4, 1) = 1: f(4, 2) = 1: f(4, 3) = 1: f(4, 4) = 1: f(4, 5) = 1: f(4, 6) = 1
f(5, 0) = 1: f(5, 1) = 1: f(5, 2) = 1: f(5, 3) = 1: f(5, 4) = 1: f(5, 5) = 1: f(5, 6) = 1
f(6, 0) = 1: f(6, 1) = 1: f(6, 2) = 1: f(6, 3) = 1: f(6, 4) = 1: f(6, 5) = 1: f(6, 6) = 1
CASE 8 'GAUSS4 (bluring)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 1 0 0 0
'0 0 1 2 1 0 0
'0 0 0 1 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 0: d = 6
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 0: f(2, 3) = 1: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 1: f(3, 3) = 2: f(3, 4) = 1: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 0: f(4, 3) = 1: f(4, 4) = 0: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 9 'GAUSS8 (bluring)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 1 2 1 0 0
'0 0 2 4 2 0 0
'0 0 1 2 1 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 0: d = 16
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 1: f(2, 3) = 2: f(2, 4) = 1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 2: f(3, 3) = 4: f(3, 4) = 2: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 1: f(4, 3) = 2: f(4, 4) = 1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 10 'NEEDGLASSES (bluring)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 30 0 0 0 30 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 5: a = 0: d = 60
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 0: f(2, 3) = 0: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 30: f(3, 2) = 0: f(3, 3) = 0: f(3, 4) = 0: f(3, 5) = 30: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 0: f(4, 3) = 0: f(4, 4) = 0: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 11 'UNSHARPCAM (bluring)
'30 0 0 10 0 0 10
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 20 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'30 0 0 30 0 0 10
sz = 7: a = 0: d = 140
f(0, 0) = 30: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 10: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 10
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 0: f(2, 3) = 0: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 0: f(3, 3) = 20: f(3, 4) = 0: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 0: f(4, 3) = 0: f(4, 4) = 0: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 30: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 30: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 10
CASE 12 'LOWSHARPEN (sharpen)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 -1 0 0 0
'0 0 -1 12-1 0 0
'0 0 0 -1 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 0: d = 8
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 0: f(2, 3) = -1: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = -1: f(3, 3) = 12: f(3, 4) = -1: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 0: f(4, 3) = -1: f(4, 4) = 0: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 13 'MEDIUMSHARPEN (sharpen)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 -1 0 0 0
'0 0 -1 10-1 0 0
'0 0 0 -1 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 0: d = 6
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 0: f(2, 3) = -1: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = -1: f(3, 3) = 10: f(3, 4) = -1: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 0: f(4, 3) = -1: f(4, 4) = 0: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 14 'HIGHSHARPEN (sharpen)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 -2 1 -2 0 0
'0 0 1 12 1 0 0
'0 0 -2 1 -2 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 0: d = 8
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -2: f(2, 3) = 1: f(2, 4) = -2: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 1: f(3, 3) = 12: f(3, 4) = 1: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -2: f(4, 3) = 1: f(4, 4) = -2: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 15 'MEXICANHAT (sharpen)
'0 0 0 0 0 0 0
'0 0 0 -1 0 0 0
'0 0 1 -2 1 0 0
'0 -1 -2 16-2 -1 0
'0 0 1 -2 1 0 0
'0 0 0 -1 0 0 0
'0 0 0 0 0 0 0
sz = 5: a = 0: d = 8
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = -1: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 1: f(2, 3) = -2: f(2, 4) = 1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = -1: f(3, 2) = -2: f(3, 3) = 16: f(3, 4) = -2: f(3, 5) = -1: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 1: f(4, 3) = -2: f(4, 4) = 1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = -1: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 16 'KIRSCHN (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 5 5 5 0 0
'0 0 -3 0 -3 0 0
'0 0 -3 -3 -3 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 5: f(2, 3) = 5: f(2, 4) = 5: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = -3: f(3, 3) = 0: f(3, 4) = -3: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -3: f(4, 3) = -3: f(4, 4) = -3: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 17 'KIRSCHNW (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 5 5 -3 0 0
'0 0 5 0 -3 0 0
'0 0 -3 -3 -3 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 5: f(2, 3) = 5: f(2, 4) = -3: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 5: f(3, 3) = 0: f(3, 4) = -3: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -3: f(4, 3) = -3: f(4, 4) = -3: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 18 'KIRSCHW (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 5 -3 -3 0 0
'0 0 5 0 -3 0 0
'0 0 5 -3 -3 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 5: f(2, 3) = -3: f(2, 4) = -3: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 5: f(3, 3) = 0: f(3, 4) = -3: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 5: f(4, 3) = -3: f(4, 4) = -3: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 19 'KIRSCHSW (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 -3 -3 -3 0 0
'0 0 5 0 -3 0 0
'0 0 5 5 -3 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -3: f(2, 3) = -3: f(2, 4) = -3: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 5: f(3, 3) = 0: f(3, 4) = -3: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 5: f(4, 3) = 5: f(4, 4) = -3: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 20 'KIRSCHS (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 -3 -3 -3 0 0
'0 0 -3 0 -3 0 0
'0 0 5 5 5 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -3: f(2, 3) = -3: f(2, 4) = -3: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = -3: f(3, 3) = 0: f(3, 4) = -3: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 5: f(4, 3) = 5: f(4, 4) = 5: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 21 'KIRSCHSE (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 -3 -3 -3 0 0
'0 0 -3 0 5 0 0
'0 0 -3 5 5 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -3: f(2, 3) = -3: f(2, 4) = -3: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = -3: f(3, 3) = 0: f(3, 4) = 5: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -3: f(4, 3) = 5: f(4, 4) = 5: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 22 'KIRSCHE (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 -3 -3 5 0 0
'0 0 -3 0 5 0 0
'0 0 -3 -3 5 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -3: f(2, 3) = -3: f(2, 4) = 5: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = -3: f(3, 3) = 0: f(3, 4) = 5: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -3: f(4, 3) = -3: f(4, 4) = 5: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 23 'KIRSCHNE (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 -3 5 5 0 0
'0 0 -3 0 5 0 0
'0 0 -3 -3 -3 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -3: f(2, 3) = 5: f(2, 4) = 5: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = -3: f(3, 3) = 0: f(3, 4) = 5: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -3: f(4, 3) = -3: f(4, 4) = -3: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 24 'LAPLACE4 (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 1 0 0 0
'0 0 1 -4 1 0 0
'0 0 0 1 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 0: f(2, 3) = 1: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 1: f(3, 3) = -4: f(3, 4) = 1: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 0: f(4, 3) = 1: f(4, 4) = 0: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 25 'LAPLACE8 (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 1 1 1 0 0
'0 0 1 -8 1 0 0
'0 0 1 1 1 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 1: f(2, 3) = 1: f(2, 4) = 1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 1: f(3, 3) = -8: f(3, 4) = 1: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 1: f(4, 3) = 1: f(4, 4) = 1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 26 'ROBERTS1 (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 1 0 0 0
'0 0 0 0 -1 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 0: f(2, 3) = 0: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 0: f(3, 3) = 1: f(3, 4) = 0: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 0: f(4, 3) = 0: f(4, 4) = -1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 27 'ROBERTS2 (edge detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 1 0 0 0
'0 0 -1 0 0 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 0: f(2, 3) = 0: f(2, 4) = 0: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 0: f(3, 3) = 1: f(3, 4) = 0: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -1: f(4, 3) = 0: f(4, 4) = 0: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 28 'PREWITT1 (line detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 -1 0 1 0 0
'0 0 -1 0 1 0 0
'0 0 -1 0 1 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -1: f(2, 3) = 0: f(2, 4) = 1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = -1: f(3, 3) = 0: f(3, 4) = 1: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -1: f(4, 3) = 0: f(4, 4) = 1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 29 'PREWITT2 (line detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 -1 -1 -1 0 0
'0 0 0 0 0 0 0
'0 0 1 1 1 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = -1: f(2, 3) = -1: f(2, 4) = -1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 0: f(3, 3) = 0: f(3, 4) = 0: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 1: f(4, 3) = 1: f(4, 4) = 1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 30 'SOBEL1 (line detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 1 0 -1 0 0
'0 0 2 0 -2 0 0
'0 0 1 0 -1 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 1: f(2, 3) = 0: f(2, 4) = -1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 2: f(3, 3) = 0: f(3, 4) = -2: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = 1: f(4, 3) = 0: f(4, 4) = -1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
CASE 31 'SOBEL2 (line detect)
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
'0 0 1 2 1 0 0
'0 0 0 0 0 0 0
'0 0 -1 -2 -1 0 0
'0 0 0 0 0 0 0
'0 0 0 0 0 0 0
sz = 3: a = 128: d = 1
f(0, 0) = 0: f(0, 1) = 0: f(0, 2) = 0: f(0, 3) = 0: f(0, 4) = 0: f(0, 5) = 0: f(0, 6) = 0
f(1, 0) = 0: f(1, 1) = 0: f(1, 2) = 0: f(1, 3) = 0: f(1, 4) = 0: f(1, 5) = 0: f(1, 6) = 0
f(2, 0) = 0: f(2, 1) = 0: f(2, 2) = 1: f(2, 3) = 2: f(2, 4) = 1: f(2, 5) = 0: f(2, 6) = 0
f(3, 0) = 0: f(3, 1) = 0: f(3, 2) = 0: f(3, 3) = 0: f(3, 4) = 0: f(3, 5) = 0: f(3, 6) = 0
f(4, 0) = 0: f(4, 1) = 0: f(4, 2) = -1: f(4, 3) = -2: f(4, 4) = -1: f(4, 5) = 0: f(4, 6) = 0
f(5, 0) = 0: f(5, 1) = 0: f(5, 2) = 0: f(5, 3) = 0: f(5, 4) = 0: f(5, 5) = 0: f(5, 6) = 0
f(6, 0) = 0: f(6, 1) = 0: f(6, 2) = 0: f(6, 3) = 0: f(6, 4) = 0: f(6, 5) = 0: f(6, 6) = 0
END SELECT
'+-----------------------------------------------------------------------------------------------+
'| Create a target image |
'| ===================== |
'+-------------------+ |
ti = _COPYIMAGE(i) ' | create target image |
w = _WIDTH(ti) ' | get target image width |
h = _HEIGHT(ti) ' | get target image height |
' +---------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Use direct image memory manipulation for speed. |
'| ============================================== |
'+-------------------+ |
m = _MEMIMAGE(i) ' | source image memory block |
tm = _MEMIMAGE(ti) ' | target image memory block |
' +---------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Apply filter to image |
'| ===================== |
'+------------------------------------------+ |
s = sz \ 2 ' | radius of kernel within matrix |
y = 0 ' | reset vertical counter |
DO ' | begin vertical image pixel counter |
o = (y * w * 4) ' | calculate offset location of pixel |
x = 0 ' | reset horizontal counter |
DO ' | begin horizontal image pixel counter |
_MEMGET m, m.OFFSET + o + 3, alph ' | get current alpha value |
sr = 0: sg = 0: sb = 0 ' | reset new pixel RGB color sums |
'+----------------------------------+ |
'| Get RGB value of pixel within image |
'| =================================== |
'+----------------------------------------------------------+ |
fy = y - s ' | set matrix row counter |
DO ' | begin matrix row counter |
fo = (fy * w * 4) + ((x - s) * 4) ' | matrix offset location |
fx = x - s ' | set matrix column counter |
DO ' | begin matrix column counter|
IF fy >= 0 AND fy < h AND fx >= 0 AND fx < w THEN ' | matrix within image?? |
_MEMGET m, m.OFFSET + fo + 2, r ' | yes, get this pixel red |
_MEMGET m, m.OFFSET + fo + 1, g ' | get this pixel green |
_MEMGET m, m.OFFSET + fo, b ' | get this pixel blue |
ELSE ' | no, outside of image |
_MEMGET m, m.OFFSET + o + 2, r ' | get edge pixel red |
_MEMGET m, m.OFFSET + o + 1, g ' | get edge pixel green |
_MEMGET m, m.OFFSET + o, b ' | get edge pixel blue |
END IF ' | |
'+--------------------------------------------------+ |
'| Calculate pixel value for output image |
'| ====================================== |
'+-------------------------------+ |
wt = f(fy - y + 3, fx - x + 3) ' | get weight of location from kernel matrix |
sr = sr + (r * wt) ' | sum up red component weight |
sg = sg + (g * wt) ' | sum up green component weight |
sb = sb + (b * wt) ' | sum up blue component weight |
fo = fo + 4 ' | move to next pixel offset in memory block |
fx = fx + 1 ' | move to next horizontal kernel location |
LOOP UNTIL fx > x + s ' | leave at right side of kernel |
fy = fy + 1 ' | move to next vertical kernel location |
LOOP UNTIL fy > y + s ' | leave at bottom of kernel |
'+---------------------------------------+ |
'| Write new pixel to target image |
'| =============================== |
'+-----------------------------------------------------------------------------+ |
_MEMPUT tm, tm.OFFSET + o, _RGBA32(CINT(sr / d) + a,_
CINT(sg / d) + a,_
CINT(sb / d) + a, alph) AS _UNSIGNED LONG ' | write |
'+-----------------------------------------------------------------------------| pixel |
'| Move to next pixel in source image |
'| ================================== |
'+-------------+ |
o = o + 4 ' | next pixel offset |
x = x + 1 ' | next image column |
LOOP UNTIL x = w ' | leave when at right side of image |
y = y + 1 ' | next image row |
LOOP UNTIL y = h ' | leave when at bottom of image |
' +-------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Replace source image with blurred target image |
'| ============================================== |
'+-----------------------------------------------+ |
_MEMCOPY tm, tm.OFFSET, tm.SIZE TO m, m.OFFSET ' | overwrite source image with target image |
_MEMFREE tm ' | free target image memory block |
_MEMFREE m ' | free source image memory block |
_FREEIMAGE ti ' | remove target image image from memory |
' +-----------------------------------------------|
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __Gamma (i AS LONG, l AS SINGLE) ' __Gamma |
' ___________________________________________________________________________________________________|___
'/ \
'| Adjusts the gamma correction of an image without affecting original alpha values. |
'| |
'| i - the image to work with |
'| l - the level of gamma correction (> 0 to <= 10, 1 = no change in gamma level) |
'| |
'| Uses the formula: v = 255 x (input value / 255) ^ 1 / gamma |
'| |
'| A level value less than 1 will darken the image. Values above 1 will brighten the image. |
'| |
'| NOTE: Only works with 32 bit images |
'| |
'| This subroutine draws insight from RhoSigma's imageprocess.bm Image Processing Libray found here: |
'| https://qb64phoenix.com/forum/showthread.php?tid=1033 |
'| |
'| More information can be found here: |
'| https://www.dfstudios.co.uk/articles/programming/image-programming-algorithms/ |
'| image-processing-algorithms-part-6-gamma-correction/ |
'\_______________________________________________________________________________________________________/
DIM m AS _MEM ' memory block holding image data
DIM e AS _OFFSET ' end of memory block
DIM o AS _OFFSET ' pixel location within memory block
DIM gc AS SINGLE ' new gamma correction value
DIM v AS INTEGER ' new calculated component gamma corrected brightness value
DIM c AS INTEGER ' generic counter
DIM h(255) AS _UNSIGNED _BYTE ' translation table to hold new gamma corrected brightness values
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Create a brightness translation table. |
'| ====================================== |
'| The following table contains the new component values based on the calculated gamma |
'| correction provided by the formula listed above. |
'+-------------------------------------------------------+ |
gc = l ' | get gamma level change desired |
IF gc <= 0 THEN gc = .001 ELSE IF gc > 10 THEN gc = 10 ' | truncate level if necessary |
gc = 1 / gc ' | calculate gamma correction exponent |
c = 0 ' | reset table counter |
DO ' | begin translation table creation |
v = FIX((c / 255) ^ gc * 255 + .5) ' | calculate new gamma value |
IF v < 0 THEN v = 0 ELSE IF v > 255 THEN v = 255 ' | truncate new gamma value if necessary |
h(c) = v ' | store new gamma value |
c = c + 1 ' | increment table counter |
LOOP UNTIL c = 256 ' | leave when table created |
' +---------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Use direct image memory manipulation for speed. |
'| ============================================== |
'+-----------------+ |
m = _MEMIMAGE(i) ' | create memory block containing image |
o = m.OFFSET ' | start position of memory block |
e = o + m.SIZE ' | end position of memory block |
' +-----------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Translate each pixel's component values to the new values contained in the table. |
'| ================================================================================= |
'| Use each component's current value as the table index value to get the new calculated |
'| brightness value. |
'+------------------------------------------------------------+ |
DO ' | begin brightness translation |
_MEMPUT m, o + 2, h(_MEMGET(m, o + 2, _UNSIGNED _BYTE)) ' | get then set new red value |
_MEMPUT m, o + 1, h(_MEMGET(m, o + 1, _UNSIGNED _BYTE)) ' | get then set new green value |
_MEMPUT m, o, h(_MEMGET(m, o, _UNSIGNED _BYTE)) ' | get then set new blue value |
o = o + 4 ' | next pixel location in block |
LOOP UNTIL o = e ' | leave when end of block reached |
_MEMFREE m ' | free memory block |
' +----------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __Contrast (i AS LONG, l AS SINGLE) ' __Contrast |
' ___________________________________________________________________________________________________|___
'/ \
'| Adjusts the contrast of an image without affecting original alpha values. |
'| |
'| i - the image to work with |
'| l - the level of contrast (-1 to 1 or -100% to +100%, 0% = no change) |
'| |
'| Uses formula: v = 259 * ( l * 128 + 255) / 255 * (259 - l * 128) * (component_level - 128) + 128 |
'| |
'| NOTE: Only works with 32 bit images |
'| |
'| This subroutine draws insight from RhoSigma's imageprocess.bm Image Processing Libray found here: |
'| https://qb64phoenix.com/forum/showthread.php?tid=1033 |
'| |
'| This subroutine also draws insight from Francis G. Loch's contrast adjustment page found here: |
'| https://www.dfstudios.co.uk/articles/programming/image-programming-algorithms/ |
'| image-processing-algorithms-part-5-contrast-adjustment/ |
'\_______________________________________________________________________________________________________/
DIM m AS _MEM ' memory block holding image data
DIM e AS _OFFSET ' end of memory block holding image data
DIM o AS _OFFSET ' each pixel location within memory block
DIM c AS INTEGER ' generic counter
DIM v AS INTEGER ' new calculated component contrast value
DIM ch AS SINGLE ' change in contrast
DIM f AS DOUBLE ' contrast correction factor
DIM h(255) AS _UNSIGNED _BYTE ' translation table to hold new component contrast values
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Create a contrast translation table. |
'| ==================================== |
'+-----------------------------------------------------+ |
ch = l * 128 ' | change scale to -128 to +128 |
f = (259 * (ch + 255)) / (255 * (259 - ch)) ' | calculate contrast correction factor |
c = 0 ' | reset table counter |
DO ' | begin translation table creation |
v = FIX(f * (c - 128) + 128) ' | calculate contrast level value |
IF v < 0 THEN v = 0 ELSE IF v > 255 THEN v = 255 ' | truncate value if necessary |
h(c) = v ' | store value |
c = c + 1 ' | increment table counter |
LOOP UNTIL c = 256 ' | leave when table created |
' +-----------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Use direct image memory manipulation for speed. |
'| ============================================== |
'+-----------------+ |
m = _MEMIMAGE(i) ' | create memory block containing image |
o = m.OFFSET ' | start position of memory block |
e = o + m.SIZE ' | end position of memory block |
' +-----------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Translate each pixel's component values to the new values contained in the table. |
'| ================================================================================= |
'| Use each component's current value as the table index value to get the new calculated |
'| contrast value. |
'+------------------------------------------------------------+ |
DO ' | begin contrast translation |
_MEMPUT m, o + 2, h(_MEMGET(m, o + 2, _UNSIGNED _BYTE)) ' | get then set new red value |
_MEMPUT m, o + 1, h(_MEMGET(m, o + 1, _UNSIGNED _BYTE)) ' | get then set new green value |
_MEMPUT m, o, h(_MEMGET(m, o, _UNSIGNED _BYTE)) ' | get then set new blue value |
o = o + 4 ' | next pixel location in block |
LOOP UNTIL o = e ' | leave when end of block reached |
_MEMFREE m ' | free memory block |
' +----------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __Brightness (i AS LONG, l AS SINGLE) ' __Brightness |
' ___________________________________________________________________________________________________|___
'/ \
'| Adjusts the brightness of an image without affecting original alpha values. |
'| |
'| i - the image to work with |
'| l - the level of brightness (-1 to 1 or -100% all black to +100% all white, 0% = no change) |
'| |
'| Uses the formula: component_color = component_color + brightness |
'| |
'| NOTE: Only works with 32 bit images |
'| |
'| This subroutine draws insight from RhoSigma's imageprocess.bm Image Processing Libray found here: |
'| https://qb64phoenix.com/forum/showthread.php?tid=1033 |
'| |
'| More information can be found here: |
'| https://www.dfstudios.co.uk/articles/programming/image-programming-algorithms/ |
'| image-processing-algorithms-part-4-brightness-adjustment/ |
'\_______________________________________________________________________________________________________/
DIM m AS _MEM ' memory block holding image data
DIM e AS _OFFSET ' end of memory block holding image data
DIM o AS _OFFSET ' each pixel location within memory block
DIM c AS INTEGER ' generic counter
DIM v AS INTEGER ' new calculated component brightness value
DIM h(255) AS _UNSIGNED _BYTE ' translation table to hold new component brightness values
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Create a brightness translation table. |
'| ====================================== |
'| The following table contains the new component values based on the brightness level (l). For |
'| example, if the level of change is -.5 (l = -.5) and the color component of any given pixel |
'| is 128 then the table at index 128 will have the value: |
'| h(128) = 128 * (l + 1) |
'| h(128) = 128 * .5 |
'| h(128) = 64 (half the brightness) |
'| All index values in this case will be half the brightness based on the level of change being |
'| -.5 (or -50%). The table in this case will translate the values 0 to 255 to 0 to 128. |
'+-----------------------------------------------------+ |
c = 0 ' | reset table index counter |
DO ' | begin translation table creation |
v = FIX(c * (l + 1)) ' | calculate new brightness value |
IF v < 0 THEN v = 0 ELSE IF v > 255 THEN v = 255 ' | truncate to 0 to 255 if necessary |
h(c) = v ' | store new brightness level |
c = c + 1 ' | increment table index counter |
LOOP UNTIL c = 256 ' | leave when table created |
' +-----------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Use direct image memory manipulation for speed. |
'| ============================================== |
'+-----------------+ |
m = _MEMIMAGE(i) ' | create memory block containing image |
o = m.OFFSET ' | start position of memory block |
e = o + m.SIZE ' | end position of memory block |
' +-----------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Translate each pixel's component values to the new values contained in the table. |
'| ================================================================================= |
'| Use each component's current value as the table index value to get the new calculated |
'| brightness value. |
'+------------------------------------------------------------+ |
DO ' | begin brightness translation |
_MEMPUT m, o + 2, h(_MEMGET(m, o + 2, _UNSIGNED _BYTE)) ' | get then set new red value |
_MEMPUT m, o + 1, h(_MEMGET(m, o + 1, _UNSIGNED _BYTE)) ' | get then set new green value |
_MEMPUT m, o, h(_MEMGET(m, o, _UNSIGNED _BYTE)) ' | get then set new blue value |
o = o + 4 ' | next pixel location in block |
LOOP UNTIL o = e ' | leave when end of block reached |
_MEMFREE m ' | free memory block |
' +----------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __GrayScale (i AS LONG) ' __GrayScale |
' ___________________________________________________________________________________________________|___
'/ \
'| Converts an image to gray scale without affecting original alpha values. |
'| |
'| i - the image to work with |
'| |
'| Uses ITU-R 601-2 Luma Transformation (L = R * 299/1000 + G * 587/1000 + B * 114/1000) |
'| |
'| NOTE: Only works with 32 bit images |
'| |
'| This subroutine draws insight from RhoSigma's imageprocess.bm Image Processing Libray found here: |
'| https://qb64phoenix.com/forum/showthread.php?tid=1033 |
'| |
'| More information can be found here: |
'| https://www.dfstudios.co.uk/articles/programming/image-programming-algorithms/ |
'| image-processing-algorithms-part-3-greyscale-conversion/ |
'\_______________________________________________________________________________________________________/
DIM m AS _MEM ' memory block holding image data
DIM e AS _OFFSET ' end of memory block
DIM o AS _OFFSET ' 4 byte pixel location within memory block
DIM r AS _UNSIGNED _BYTE ' red value of each pixel
DIM g AS _UNSIGNED _BYTE ' green value of each pixel / new gray value of each pixel
DIM b AS _UNSIGNED _BYTE ' blue value of each pixel
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Use direct image memory manipulation for speed. |
'| ============================================== |
'+-----------------+ |
m = _MEMIMAGE(i) ' | create memory block containing image |
o = m.OFFSET ' | start position of memory block |
e = o + m.SIZE ' | end position of memory block |
' +-----------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Convert each pixel in the image to its grayscale equivalent. |
'| ============================================================ |
'| Get each pixel's red, green, and blue components and calculate the gray level using Luma |
'| Transformation. Use the same calculated value to write the pixel's red, green, and blue |
'| components to create a level of gray. |
'+---------------------------------------+ |
DO ' | begin luma transformation |
_MEMGET m, o + 2, r ' | get red (0 to 255) |
_MEMGET m, o + 1, g ' | get green (0 to 255) |
_MEMGET m, o, b ' | get blue (0 to 255) |
g = r * .299 + g * .587 + b * .114 ' | calculate gray level |
_MEMPUT m, o + 2, g ' | set red pixel value (RGB all same to make gray level) |
_MEMPUT m, o + 1, g ' | set green pixel value |
_MEMPUT m, o, g ' | set blue pixel value |
o = o + 4 ' | next pixel location in block |
LOOP UNTIL o = e ' | leave when end of block reached |
_MEMFREE m ' | free memory block |
' +-------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __Replace (i AS LONG, c AS _UNSIGNED LONG, n AS _UNSIGNED LONG) ' __Replace |
' ___________________________________________________________________________________________________|___
'/ \
'| Replaces a color in an image with another color without affecting original alpha values. |
'| |
'| i - the image to work with |
'| c - the color to replace (from) |
'| n - the new replacement color (to) |
'| |
'| NOTE: Only works with 32 bit images |
'| |
'| This subroutine draws insight from RhoSigma's imageprocess.bm Image Processing Libray found here: |
'| https://qb64phoenix.com/forum/showthread.php?tid=1033 |
'\_______________________________________________________________________________________________________/
CONST GETRGB = 16777215 ' 00000000111111111111111111111111 extract RGB
CONST GETALPHA = 4278190080 ' 11111111000000000000000000000000 extract alpha
DIM m AS _MEM ' memory block holding image data
DIM e AS _OFFSET ' end of memory block
DIM o AS _OFFSET ' pixel location within memory block
DIM cr AS LONG ' RGB of color to replace
DIM rc AS LONG ' RGB of replacement color
DIM p AS _UNSIGNED LONG ' pixel color
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Extract RBG component colors |
'| ============================ |
'+------------------+ |
cr = c AND GETRGB ' | get RGB from color to replace |
rc = n AND GETRGB ' | get RGB from replacement color |
' +----------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Use direct image memory manipulation for speed. |
'| ============================================== |
'+-----------------+ |
m = _MEMIMAGE(i) ' | create memory block containing image |
o = m.OFFSET ' | start position of memory block |
e = o + m.SIZE ' | end position of memory block |
' +-----------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Replace color in image |
'| ====================== |
'+--------------------------------------------------------------+ |
DO ' | begin color replacement |
_MEMGET m, o, p ' | get pixel from block |
IF (p AND GETRGB) = cr THEN ' | is this the color to replace? |
_MEMPUT m, o, (p AND GETALPHA) + rc AS _UNSIGNED LONG ' | yes, replace pixel color |
END IF ' | |
o = o + 4 ' | next pixel location in block |
LOOP UNTIL o = e ' | leave when end of block reached|
_MEMFREE m ' | free memory block |
' +--------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __Negative (i AS LONG) ' __Negative |
' ___________________________________________________________________________________________________|___
'/ \
'| Creates a negative image without affecting original alpha values. |
'| |
'| i - the image to work with |
'| |
'| NOTE: Only works with 32 bit images |
'| |
'| This subroutine draws insight from RhoSigma's imageprocess.bm Image Processing Libray found here: |
'| https://qb64phoenix.com/forum/showthread.php?tid=1033 |
'\_______________________________________________________________________________________________________/
CONST RGB = 16777215 ' 000000001111111111111111 extract RGB
DIM m AS _MEM ' memory block holding image data
DIM e AS _OFFSET ' end of memory block
DIM o AS _OFFSET ' pixel location within memory block
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Use direct image memory manipulation for speed. |
'| ============================================== |
'+-----------------+ |
m = _MEMIMAGE(i) ' | create memory block containing image |
o = m.OFFSET ' | start position of memory block |
e = o + m.SIZE ' | end position of memory block |
' +-----------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Negate all image pixels |
'| ======================= |
'+--------------------------------------------------------------------------+ |
DO ' | begin negation |
_MEMPUT m, o, _MEMGET(m, o, _UNSIGNED LONG) XOR RGB AS _UNSIGNED LONG ' | negate & save pixel|
o = o + 4 ' | next pixel location|
LOOP UNTIL o = e ' | leave end of block |
_MEMFREE m ' | free memory block |
' +--------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __Zoom (i AS LONG, p AS SINGLE) ' __Zoom |
' ___________________________________________________________________________________________________|___
'/ \
'| Resizes an image |
'| |
'| i - the image to work with |
'| p - the zoom percentage ( .25 = 25%, 1 = 100%, 2 = 200%, etc. ) |
'| |
'| NOTE: Only works with 32 bit images |
'\_______________________________________________________________________________________________________/
DIM c AS LONG ' temporary copy of image
DIM b AS INTEGER ' image blend setting
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Resize the image |
'| ================ |
'+-------------------------------------------------------+ |
b = _BLEND(i) ' | get current blend setting of image |
c = _COPYIMAGE(i) ' | copy the image |
_DONTBLEND c ' | turn off blending for speed |
_FREEIMAGE i ' | remove the original image surface |
i = _NEWIMAGE(_WIDTH(c) * p, _HEIGHT(c) * p, 32) ' | create the new image surface |
_DONTBLEND i ' | turn off blending for speed |
_PUTIMAGE (0, 0)-(_WIDTH(i) - 1, _HEIGHT(i) - 1), c, i ' | stretch/shrink copy onto image surface|
_FREEIMAGE c ' | remove copy of image |
IF b THEN _BLEND i ' | restore blending to image |
' +---------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __Flip (i AS LONG, d AS INTEGER) ' __Flip |
' ___________________________________________________________________________________________________|___
'/ \
'| Flips an image |
'| |
'| i - the image to work with |
'| d - the flip direction (0 = none, 1 = horizontal, 2 = vertical, 3 = both) |
'| |
'| NOTE: Only works with 32 bit images |
'\_______________________________________________________________________________________________________/
DIM c AS LONG ' temporary copy of image
DIM b AS INTEGER ' image blend setting
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Flip the image |
'| ============== |
'+---------------------------------------------------------------+ |
b = _BLEND(i) ' | get blend setting of image |
_DONTBLEND i ' | turn off blending for speed |
c = _COPYIMAGE(i) ' | copy the original image |
_DONTBLEND c ' | turn off blending for speed |
SELECT CASE d ' | flip in which direction? |
CASE 1 ' | horizontally |
_PUTIMAGE (_WIDTH(i) - 1, 0)-(0, _HEIGHT(i) - 1), c, i ' | map copy of image onto image |
CASE 2 ' | vertically |
_PUTIMAGE (0, _HEIGHT(i) - 1)-(_WIDTH(i) - 1, 0), c, i ' | map copy of image onto image |
CASE 3 ' | horizontally and vertically |
_PUTIMAGE (_WIDTH(i) - 1, _HEIGHT(i) - 1)-(0, 0), c, i ' | map copy of image onto image |
END SELECT ' | |
_FREEIMAGE c ' | remove copy of image |
IF b THEN _BLEND i ' | restore blending to image |
' +-------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB
' _______________________________________________________________________________________________________
'/ \
SUB __Rotate (i AS LONG, d AS SINGLE) ' __Rotate |
' ___________________________________________________________________________________________________|___
'/ \
'| Rotates an image to an the degree angle provided. |
'| |
'| i - the image to work with |
'| d - the angle of rotation (0 to 360 clockwise from north/up ) |
'| |
'| NOTE: Only works with 32 bit images |
'\_______________________________________________________________________________________________________/
DIM c AS LONG ' temporary copy of image
DIM a AS SINGLE ' angle of rotation
DIM px(3) AS INTEGER ' x vector values of four corners of image
DIM py(3) AS INTEGER ' y vector values of four corners of image
DIM l AS INTEGER ' left-most value seen when calculating rotated image size
DIM r AS INTEGER ' right-most value seen when calculating rotated image size
DIM t AS INTEGER ' top-most value seen when calculating rotated image size
DIM b AS INTEGER ' bottom-most value seen when calculating rotated image size
DIM bl AS INTEGER ' image blend setting
DIM w AS INTEGER ' width of image to rotate
DIM h AS INTEGER ' height of image to rotate
DIM rw AS INTEGER ' width of rotated image
DIM rh AS INTEGER ' height of rotated image
DIM xo AS INTEGER ' x offset used to move (0,0) back to upper left corner of image
DIM yo AS INTEGER ' y offset used to move (0,0) back to upper left corner of image
DIM cr AS SINGLE ' cosine of radian calculation for matrix rotation
DIM sr AS SINGLE ' sine of radian calculation for matrix rotation
DIM x AS SINGLE ' new x vector of rotated point
DIM y AS SINGLE ' new y vector of rotated point
DIM v AS INTEGER ' vector counter
'+-------------------------------------------------------------------------------------------------------+
'| Check for a valid image before proceeding. |
'| ========================================== |
'+------------------------------+ |
IF i < -1 THEN ' | is this a valid image handle? |
IF _PIXELSIZE(i) = 4 THEN ' | is this a 32 bit color image? |
' +------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned off for an increase in processing speed. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:OFF
'+-----------------------------------------------------------------------------------------------+
'| Copy original image and correct rotation angle if needed |
'|========================================================= |
'+------------------------------+ |
bl = _BLEND(i) ' | yes, get blend setting of image |
c = _COPYIMAGE(i) ' | create a copy of image |
_DONTBLEND c ' | turn off blending for speed |
_FREEIMAGE i ' | remove image |
a = d ' | get angle |
IF a < 0 OR a >= 360 THEN ' | angle out of range? (keep angle between 0 and 360) |
a = a MOD 360 ' | yes, get remainder of modulus angle and 360 |
IF a < 0 THEN a = a + 360 ' | add 360 if less than 0 |
END IF ' +----------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Create the four vector points for the rotation matrix |
'| ===================================================== |
'| Move coordinate 0,0 to the center of the image. |
'+-------------------+ |
w = _WIDTH(c) ' | width of image to rotate |
h = _HEIGHT(c) ' | height of image to rotate -x,-y +-----------------+ x,-y |
px(0) = -w * .5 ' | px(0),py(0) | | px(3),py(3) |
py(0) = -h * .5 ' | Create points around (0,0) | | |
px(1) = px(0) ' | that match the size of the | . | |
py(1) = h * .5 - 1 ' | original image. This | 0,0 | |
px(2) = w * .5 - 1 ' | creates four vector | | |
py(2) = py(1) ' | quantities to work with. px(1),py(1) | | px(2),py(2) |
px(3) = px(2) ' | -x,y +-----------------+ x,y |
py(3) = py(0) ' | |
' +---------------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Perform rotation matrix ( https://en.wikipedia.org/wiki/Rotation_matrix ) |
'| ======================= |
'+--------------------------------+ |
sr = SIN(_D2R(-a)) ' | sine and cosine calculations for rotation matrix |
cr = COS(_D2R(-a)) ' | degrees converted to radian, -Degree = clockwise rotation |
DO ' | cycle through vectors |
x = px(v) * cr + sr * py(v) ' | perform 2D rotation matrix on vector |
y = py(v) * cr - px(v) * sr ' | (see wikipedia link above for more information) |
px(v) = x ' | save new x vector |
py(v) = y ' | save new y vector |
IF px(v) < l THEN l = px(v) ' | record left most coordinate seen |
IF px(v) > r THEN r = px(v) ' | record right most coordinate seen |
IF py(v) < t THEN t = py(v) ' | record top most coordinate seen |
IF py(v) > b THEN b = py(v) ' | record bottom most coordinate seen |
v = v + 1 ' | increment vector counter |
LOOP UNTIL v = 4 ' | leave when all vectors processed |
' +--------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Make coordinate 0,0 the upper left corner |
'| ========================================= |
'| Move coordinate 0,0 back the upper left corner of the image. |
'+--------------------------+ |
rw = r - l + 1 ' | calculate width of rotated image |
rh = b - t + 1 ' | calculate height of rotated image |
xo = rw * .5 ' | calculate upper left x coordinate |
yo = rh * .5 ' | calculate upper left y coordinate |
v = 0 ' | reset corner counter |
DO ' | cycle through rotated image coordinates |
px(v) = px(v) + xo ' | adjust each vector's x coordinate |
py(v) = py(v) + yo ' | adjust each vector's y coordinate |
v = v + 1 ' | increment corner counter |
LOOP UNTIL v = 4 ' | leave when all four corners of image adjusted |
' +--------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Create new image canvas and map image to new coordinates |
'| ======================================================== |
'+--------------------------+ |
i = _NEWIMAGE(rw, rh, 32) ' | create rotated image canvas |
_DONTBLEND i ' | turn off blending for speed |
_MAPTRIANGLE (0, 0)-(0, h - 1)-(w - 1, h - 1), c TO(px(0), py(0))-(px(1), py(1))-(px(2), py(2)), i
_MAPTRIANGLE (0, 0)-(w - 1, 0)-(w - 1, h - 1), c TO(px(0), py(0))-(px(3), py(3))-(px(2), py(2)), i
_FREEIMAGE c ' | remove temporary image |
IF bl THEN _BLEND i ' | restore blending to image |
' +--------------------------------------------------------------------+
'+-----------------------------------------------------------------------------------------------+
'| Error checking is turned back on. |
'+-----------------------------------------------------------------------------------------------+
$CHECKING:ON
END IF
END IF
END SUB