"Girl at Gulg Volcano" - Final Fantasy Tactics Proposition Calculator

[johannhowitzer]

This program will require a little explanation.  It may look like a game when you run it, but it's just a way to plug in your stats and see what mission results you'll get.  Controls are just arrow keys, enter and escape, along with the plus/minus keys to the left of backspace, as an additional convenience when tweaking stats.  To compile, you will also need resource.mfi and icon32.ico, which are in the attached zip file:


  Girl at Gulg Volcano.zip (Size: 210.3 KB / Downloads: 26)

Final Fantasy Tactics has little missions you can do, called "Propositions."  You pay a little money, send characters, they spend some days being unavailable while doing the mission, then you can return and pick them up when done, for some money, ability points, and also extra lore in many cases.

But success on a mission is not guaranteed, and Final Fantasy Tactics does not tell you anything about what influences the outcome.  Finally, years later via decompilation, the details were uncovered.  And they are ridiculously complicated for such a small part of the game.  Your characters' jobs, levels, and brave and faith values all play a part.

So in this program, you can select a proposition, set up the three characters to match your party, and you can see what the outcome will be at the bottom.  As the game allows you to send less than three characters, you can toggle each unit on or off.  And there is also a toggle between the original PS1 release's translation, and the PSP "War of the Lions" remake's translation.

This project represents FAR too much work, for how few people will probably ever use it for its intended purpose, but I thought I'd post it here anyway, both as a demonstration of the graphics, and just in case anyone happens to like Final Fantasy Tactics.  You do not want to know how much time I spent making sure the graphics were as faithful to the game as possible.  Was fun, though, and I learned a lot!

Code: (Select All)

$noprefix

$exeicon:'icon32.ico'



title "Girl at Gulg Volcano"



const true = -1

const false = 0



type coordinate_int

  x as integer

  y as integer

end type



' ===== Screen =====



const screenw = 256

const screenh = 240

dim shared full_screen as unsigned long ' Main screen before scaling

full_screen = newimage(screenw, screenh, 32)



dim shared option_window_size as byte

option_window_size = 2



dim shared scaled_screen(3) as unsigned long

scaled_screen(1) = newimage(280, 240, 32)

scaled_screen(2) = newimage(512, 480, 32)

scaled_screen(3) = newimage(768, 720, 32)

screen scaled_screen(option_window_size)

display_screen



' ===== Source images =====



dim shared bar_background as unsigned long

dim shared job_background as unsigned long

dim shared job_image      as unsigned long

dim shared window_image  as unsigned long

dim shared city_image    as unsigned long

dim shared data_image    as unsigned long



dim shared cursor_layer  as unsigned long

dim shared frame_assembly as unsigned long

dim shared store_screen  as unsigned long

dim shared final_screen  as unsigned long



cursor_layer    = newimage(screenw, screenh, 32)

frame_assembly  = newimage(screenw, screenh, 32)

store_screen    = newimage(screenw, screenh, 32)

final_screen    = newimage(screenw, screenh, 32)



' ===== Fonts =====



const fonts = 9



' Glass Fonts - custom pixel font processing and drawing



type font_structure

  image as unsigned long

  pos  as coordinate_int

  h    as integer

  w    as integer

end type



' Alignment in font calls

const left_align  = 0

const right_align  = 1

const center_align = 2



dim shared g_font(fonts, 255) as font_structure ' Number of fonts comes from main program header



' Current font options in use

dim shared font_using as byte          ' Index of current font being used

dim shared font_align as byte          ' Alignment

dim shared font_dest  as unsigned long  ' Destination image surface

dim shared font_x    as integer        ' Rolling font position, set by each glass_fonts call

dim shared font_y    as integer



const f_text_black  = 1

const f_text_red    = 2

const f_text_blue  = 3

const f_text_dkblue = 4

const f_gil_white  = 5

const f_map_white  = 6

const f_map_grey    = 7

const f_map_black  = 8

const f_map_dkblue  = 9



' --- Resource file ---



dim shared mfi_s(255) as long ' Size

dim shared mfi_o(255) as long ' Offset

dim shared mfi_count  as unsigned byte

dim shared mfi_index  as unsigned byte

mfi_loader "resource.mfi"



for n = 1 to fonts: initialize_font n: next



const f_row_h = 16



' ===== Window data =====



const win_normal      = 1 ' Normal window with drop shadow

const win_normal_dark = 2 ' Darkened version, when inactive

const win_list        = 3 ' Top and bottom bars added

const win_list_dark  = 4

const window_count    = 4



dim shared window_piece(window_count, 3) as coordinate_int

'          window            origin    left  top    mid  mid  right bot

set_window win_normal,        1,  1,    12,  8,    15,  15,    4,  6

set_window win_list,        44,  1,    3,  9,    15,  15,    5,  8

set_window win_normal_dark,  79,  1,    12,  8,    15,  15,    4,  6

set_window win_list_dark,  122,  1,    3,  9,    15,  15,    5,  8



' ===== Drop shadow data =====



source data_image



dim shared finger_shadow(-1 to 0, 16, 12) as integer

for d = -1 to 0: for y = 0 to 12: for x = 0 to 16

  dx = 1 + x + (18 * abs(d)): dy = 32 + y

  if alpha(point(dx, dy)) = 0 then continue

  finger_shadow(d, x, y) = red(point(dx, dy))

next x: next y: next d



dest full_screen

dim shared blob_shadow(-1 to 0, 19, 9) as integer

for d = -1 to 0: for y = 0 to 9: for x = 0 to 19

  dx = 1 + x + (21 * abs(d)): dy = 46 + y

  if alpha(point(dx, dy)) = 0 then continue

  blob_shadow(d, x, y) = red(point(dx, dy))

next x: next y: next d



' ===== Proposition system data =====



const psx = 1

const psp = 2



const failure      = 0

const success      = 59

const great_success = 99



const job_count  = 20

const prop_count = 96



dim shared job_name$(2, job_count)

const j_sq =  1: set_jn j_sq, "Squire",    "Squire"

const j_ch =  2: set_jn j_ch, "Chemist",    "Chemist"

const j_kn =  3: set_jn j_kn, "Knight",    "Knight"

const j_ar =  4: set_jn j_ar, "Archer",    "Archer"

const j_mk =  5: set_jn j_mk, "Monk",      "Monk"

const j_pr =  6: set_jn j_pr, "Priest",    "White Mage"

const j_wz =  7: set_jn j_wz, "Wizard",    "Black Mage"

const j_tm =  8: set_jn j_tm, "Time Mage",  "Time Mage"

const j_su =  9: set_jn j_su, "Summoner",  "Summoner"

const j_th = 10: set_jn j_th, "Thief",      "Thief"

const j_me = 11: set_jn j_me, "Mediator",  "Orator"

const j_or = 12: set_jn j_or, "Oracle",    "Mystic"

const j_ge = 13: set_jn j_ge, "Geomancer",  "Geomancer"

const j_ln = 14: set_jn j_ln, "Lancer",    "Dragoon"

const j_sm = 15: set_jn j_sm, "Samurai",    "Samurai"

const j_nj = 16: set_jn j_nj, "Ninja",      "Ninja"

const j_cl = 17: set_jn j_cl, "Calculator", "Arithmetician"

const j_bd = 18: set_jn j_bd, "Bard",      "Bard"

const j_dc = 19: set_jn j_dc, "Dancer",    "Dancer"

const j_mi = 20: set_jn j_mi, "Mime",      "Mime"



dim shared type_name$(8)

const salvage = 1: type_name$(salvage) = "Salvage"

const mining  = 2: type_name$(mining)  = "Mining"

const explore = 3: type_name$(explore) = "Exploration"

const combat  = 4: type_name$(combat)  = "Combat"

const invest  = 5: type_name$(invest)  = "Investigation"

const invest2 = 6: type_name$(invest2) = "Investigation 2"

const oddjob  = 7: type_name$(oddjob)  = "Odd Job"

const contest = 8: type_name$(contest) = "Contest"

dim shared type_job_wp(8, job_count) as byte ' WP per proptype-job pair

dim shared stat_name$(3)

const neutral = 0: stat_name$(neutral) = "Neutral"

const brave  = 1: stat_name$(brave)  = "Brave"

const faith  = 2: stat_name$(faith)  = "Faith"

dim shared stat_job_wp(3, job_count) as byte ' WP per propstat-job pair

dim shared stat_br_wp(3, 5)  as byte ' bonus WP from Brave stat

dim shared stat_fa_wp(3, 5)  as byte ' bonus WP from Faith stat

dim shared stat_lv_wp(3, 10) as byte ' bonus WP from level

set_prop_wp



dim shared stat_range$(5)

stat_range$(1) = "3-20"

stat_range$(2) = "21-40"

stat_range$(3) = "41-60"

stat_range$(4) = "61-80"

stat_range$(5) = "81-97"

dim shared level_range$(10)

level_range$(1)  = "1-10"

level_range$(2)  = "11-20"

level_range$(3)  = "21-30"

level_range$(4)  = "31-40"

level_range$(5)  = "41-50"

level_range$(6)  = "51-60"

level_range$(7)  = "61-70"

level_range$(8)  = "71-80"

level_range$(9)  = "81-90"

level_range$(10) = "91-99"



dim shared prop_name$(2, prop_count)

dim shared prop_city(prop_count) as byte

dim shared prop_type(prop_count) as byte

dim shared prop_stat(prop_count) as byte



dim shared city_name$(2, 15)

const igros    =  1: city_name$(psx, igros)    = "Igros Castle":            city_name$(psp, igros)    = "Eagrose Castle"

const gariland  =  2: city_name$(psx, gariland)  = "Gariland Magic City":      city_name$(psp, gariland)  = "Magick City of Gariland"

const dorter    =  3: city_name$(psx, dorter)    = "Dorter Trade City":        city_name$(psp, dorter)    = "Merchant City of Dorter"

const zaland    =  4: city_name$(psx, zaland)    = "Zaland Fort City":        city_name$(psp, zaland)    = "Castled City of Zaland"

const lionel    =  5: city_name$(psx, lionel)    = "Lionel Castle":            city_name$(psp, lionel)    = "Lionel Castle"

const goug      =  6: city_name$(psx, goug)      = "Goug Machine City":        city_name$(psp, goug)      = "Clockwork City of Goug"

const warjilis  =  7: city_name$(psx, warjilis)  = "Warjilis Trade City":      city_name$(psp, warjilis)  = "Port City of Warjilis"

const goland    =  8: city_name$(psx, goland)    = "Goland Coal City":        city_name$(psp, goland)    = "Mining Town of Gollund"

const lesalia  =  9: city_name$(psx, lesalia)  = "Lesalia Imperial Capital": city_name$(psp, lesalia)  = "Royal City of Lesalia"

const yardow    = 10: city_name$(psx, yardow)    = "Yardow Fort City":        city_name$(psp, yardow)    = "Walled City of Yardrow"

const bervenia  = 11: city_name$(psx, bervenia)  = "Bervenia Free City":      city_name$(psp, bervenia)  = "Free City of Bervenia"

const riovanes  = 12: city_name$(psx, riovanes)  = "Riovanes Castle":          city_name$(psp, riovanes)  = "Riovanes Castle"

const zeltennia = 13: city_name$(psx, zeltennia) = "Zeltennia Castle":        city_name$(psp, zeltennia) = "Zeltennia Castle"

const zarghidas = 14: city_name$(psx, zarghidas) = "Zarghidas Trade City":    city_name$(psp, zarghidas) = "Trade City of Sal Ghidos"

const limberry  = 15: city_name$(psx, limberry)  = "Limberry Castle":          city_name$(psp, limberry)  = "Limberry Castle"



dim shared chapter_name$(2, 9)

const ch2    = 1: chapter_name$(psx, ch2)    = "Chapter 2":          chapter_name$(psp, ch2)    = "Chapter 2"

const ch3    = 2: chapter_name$(psx, ch3)    = "Chapter 3":          chapter_name$(psp, ch3)    = "Chapter 3"

const ch3b  = 3: chapter_name$(psx, ch3b)  = "After Book Storage": chapter_name$(psp, ch3b)  = "After Book Storage"

const ch4    = 4: chapter_name$(psx, ch4)    = "Chapter 4":          chapter_name$(psp, ch4)    = "Chapter 4"

const ch4b  = 5: chapter_name$(psx, ch4b)  = "After Limberry":    chapter_name$(psp, ch4b)  = "After Limberry"

const virgo  = 6: chapter_name$(psx, virgo)  = "Aug 23 to Sep 22":  chapter_name$(psp, virgo)  = "During Virgo"

const aries  = 7: chapter_name$(psx, aries)  = "Mar 21 to Apr 19":  chapter_name$(psp, aries)  = "During Aries"

const sagit  = 8: chapter_name$(psx, sagit)  = "Nov 23 to Dec 22":  chapter_name$(psp, sagit)  = "During Sagittarius"

const cancer = 9: chapter_name$(psx, cancer) = "Jun 22 to Jul 22":  chapter_name$(psp, cancer) = "During Cancer"

dim shared prop_chapter(prop_count) as byte



const item = 1

const land = 2

dim shared prop_reward(prop_count) as byte

dim shared reward$(2, 2)

reward$(psx, item) = "Treasure"

reward$(psx, land) = "Unexplored Land"

reward$(psp, item) = "Artefact"

reward$(psp, land) = "Wonder"



' For setting up proposition data

dim shared prop_i as byte

dim shared prop_c as byte



set_prop_data



dim shared subtotal_wp    as integer ' Total before job is factored in

dim shared total_wp        as integer



' ===== Input handling =====



' References for press function and hold array

const up_key    = 1

const down_key  = 2

const left_key  = 3

const right_key = 4

const minus_key = 5

const plus_key  = 6

const f1_key    = 7 ' Toggle console

const enter_key = 8

const esc_key  = 9



' Input reference and binding data

const keybind_count = 9 ' Number of functions



' Input handling routine library - keyboard, gamepad, mouse



' Must be set per program: action constants, keybind_name$(), keybind_default(), keybind_overlap()



' Example of action constants:

' const up_key        =  1

' const down_key      =  2

' const left_key      =  3

' const right_key    =  4

' const weapon_key    =  5

' const shield_key    =  6





dim shared dev_keyboard as byte ' Store device index, to be re-checked whenever inputs are involved

dim shared dev_gamepad  as byte

dim shared dev_mouse    as byte

const keyboard = 1

const gamepad  = 2

const mouse    = 3



kc = keybind_count

dim shared keybind_name$(kc)                  ' Name of keybind slots - "WEAPON, UP" etc



dim shared key_name$(512, 2)                  ' Names of keyboard keys and gamepad buttons

dim shared keybind(kc, 2)          as integer ' Contains key code assigned by player

dim shared keybind_default(kc, 2)  as integer ' Defaults in case player wants to reset



dim shared axis_threshold as single ' Amount a stick needs to be tilted before input is registered

axis_threshold = 0.7

set_key_data



' Input tracking flags

dim shared press(kc)      as byte ' What was pressed this frame

dim shared hold(kc)        as byte ' What was pressed last frame





' Mouse data

dim shared mouse_press(3)    as byte

dim shared mouse_hold(3)      as byte

dim shared mouse_press_x(3)  as integer ' Records where mouse button press started

dim shared mouse_press_y(3)  as integer

dim shared mouse_release_x(3) as integer ' Records where mouse button was released

dim shared mouse_release_y(3) as integer

dim shared mouse_pos_x        as integer ' Current position

dim shared mouse_pos_y        as integer



set_keybinds



dim shared key_held(keybind_count) as byte

const repeat_key  = 10 ' Frames from starting to hold key when key begins repeating

const repeat_speed = 2  ' Once begun, repeat once per this many frames



' Cursor visual position

dim shared c_posx(3) as integer

dim shared c_posy(8) as integer

c_posx(1) =  5

c_posx(2) = 30

c_posx(3) = 55

c_posy(1) =  2

c_posy(2) =  4

c_posy(3) =  7

c_posy(4) = 17

c_posy(5) = 19

c_posy(6) = 20

c_posy(7) = 21

c_posy(8) = 22



const cmovef = 5 ' Frames it takes for cursor to move to new position



dim shared city_menu_scroll as byte

dim shared city_menu_cursor as byte

dim shared prop_menu_cursor as byte

city_menu_scroll = 0

city_menu_cursor = 1

prop_menu_cursor = 1



' ===== Ring job selection =====



const job_width  = 22

const job_height = 37



const interp_frames = 13



dim shared ring_pos(20, interp_frames) as coordinate_int ' Visual position of job icons on ring

ring_pos( 0, 0).x = 117: ring_pos( 0, 0).y = 168

ring_pos( 1, 0).x = 150: ring_pos( 1, 0).y = 164

ring_pos( 2, 0).x = 179: ring_pos( 2, 0).y = 154

ring_pos( 3, 0).x = 201: ring_pos( 3, 0).y = 140

ring_pos( 4, 0).x = 214: ring_pos( 4, 0).y = 121

ring_pos( 5, 0).x = 216: ring_pos( 5, 0).y = 102

ring_pos( 6, 0).x = 208: ring_pos( 6, 0).y =  83

ring_pos( 7, 0).x = 189: ring_pos( 7, 0).y =  66

ring_pos( 8, 0).x = 163: ring_pos( 8, 0).y =  54

ring_pos( 9, 0).x = 132: ring_pos( 9, 0).y =  48

ring_pos(10, 0).x =  99: ring_pos(10, 0).y =  48

ring_pos(11, 0).x =  68: ring_pos(11, 0).y =  55

ring_pos(12, 0).x =  43: ring_pos(12, 0).y =  67

ring_pos(13, 0).x =  25: ring_pos(13, 0).y =  84

ring_pos(14, 0).x =  17: ring_pos(14, 0).y = 103

ring_pos(15, 0).x =  20: ring_pos(15, 0).y = 122

ring_pos(16, 0).x =  33: ring_pos(16, 0).y = 140

ring_pos(17, 0).x =  55: ring_pos(17, 0).y = 155

ring_pos(18, 0).x =  84: ring_pos(18, 0).y = 164

ring_pos(19, 0).x =  0: ring_pos(19, 0).y =  0 ' These are to prevent invalid subscript, but still

ring_pos(20, 0).x = 233: ring_pos(20, 0).y =  0 '    position at extremes to show error visually

const ring_center_x = 116 ' Unit's current job in center of ring

const ring_center_y = 104



' Produce interpolation values for animation

i = 1 / interp_frames

for j1 = 0 to 18

  j2 = wrap(j1 + 1, 0, 18)

  dx = ring_pos(j2, 0).x - ring_pos(j1, 0).x

  dy = ring_pos(j2, 0).y - ring_pos(j1, 0).y

  for f = 1 to interp_frames

      ring_pos(j1, f).x = rounding(ring_pos(j1, 0).x + (dx * i * f))

      ring_pos(j1, f).y = rounding(ring_pos(j1, 0).y + (dy * i * f))

  next f

next j1



' ===== Cursor animation =====



dim shared cursor_anim(46) as byte

for n =  1 to  2: cursor_anim(n) =  0: next n

for n =  3 to  6: cursor_anim(n) =  1: next n

for n =  7 to 12: cursor_anim(n) =  2: next n

for n = 13 to 20: cursor_anim(n) =  1: next n

for n = 21 to 30: cursor_anim(n) =  0: next n

for n = 31 to 46: cursor_anim(n) = -1: next n

dim shared cursor_frame as byte

cursor_frame = 1



' ===== User settings =====



dim shared light_mode as byte

light_mode = 1



dim shared hue(2, 4)

const hue_back  = 0: hue(1, hue_back)  = 15: hue(2, hue_back)  =  0

const hue_full  = 1: hue(1, hue_full)  =  0: hue(2, hue_full)  = 15

const hue_faded  = 2: hue(1, hue_faded)  =  7: hue(2, hue_faded)  =  8

const hue_cursor = 3: hue(1, hue_cursor) =  1: hue(2, hue_cursor) =  9

const hue_red    = 4: hue(1, hue_red)    =  4: hue(2, hue_red)    = 12



dim shared console_type as byte

console_type = psx



dim shared proposition as integer ' Proposition currently being used

proposition = 1



type wp_structure

  job      as byte

  stat    as byte

  lv      as byte

  br      as byte

  fa      as byte

  subtotal as byte ' Total before job is factored in

  total    as byte

end type

type unit_structure

  disabled as byte ' True means unit is ignored in total

  job      as byte

  gender  as byte ' Only affects displayed sprite in ring, and availability of bard/dancer

  lv      as byte ' Values range 1 to 10

  br      as byte ' Values range 1 to 5

  fa      as byte ' Values range 1 to 5

  wp      as wp_structure ' Unit's current WP are processed into this

end type

dim shared unit(3) as unit_structure



const g_male  = 1

const g_female = 2



for u = 1 to 3

  unit(u).disabled = false

  unit(u).job      = j_sq  ' All jobs start as Squire

  unit(u).gender  = g_male

  unit(u).lv      = 1      ' All levels start as 1-10

  unit(u).br      = 3      ' All brave/faith starts at 41-60

  unit(u).fa      = 3

next u



calculate_wp













cx = 1

cy = 1



dim shared cursor_pos(3, 6) as coordinate_int



do

  limit 60



  putimage(0, 0)-(screenw - 1, screenh - 1), bar_background, full_screen, (0, 0)-(screenw - 1, screenh - 1)



  draw_prop_window false



  set_font f_text_red, left_align, full_screen

  ox = 165: oy = 10

  draw_frame win_normal, ox, oy, 80, 42, full_screen

  x1 = ox + 10: y1 = oy + 8

  cursor_pos(2, 1).x = x1 - 4: cursor_pos(2, 1).y = y1

  glass_fonts "Console", x1, y1

  if console_type = psx then t$ = "PSX" else t$ = "PSP"

  font_using = f_text_black: glass_fonts t$, x1 + 5, y1 + 16

  x1 = x1 + 44

  cursor_pos(3, 1).x = x1 - 4: cursor_pos(3, 1).y = y1

  font_using = f_text_red: glass_fonts "Size", x1, y1

  font_using = f_text_black: glass_fonts "x" + trim$(str$(option_window_size)), x1 + 3, y1 + 16



  for u = 1 to 3

      big_font = f_text_black: small_font = f_map_black: w = win_normal

      if unit(u).disabled = true then big_font = f_text_dkblue: small_font = f_map_dkblue: w = win_normal_dark



      set_font big_font, left_align, full_screen

      ox = 15 + ((u - 1) * 78): oy = 110

      for n = 3 to 6: cursor_pos(u, n).x = ox + 2: next n

      draw_frame w, ox, oy, 74, 90, full_screen

      x1 = ox + 6: x2 = x1 + 40: y1 = oy + 8

      glass_fonts "Job", x1, y1: cursor_pos(u, 3).y = y1: y1 = y1 + f_row_h

        set_font small_font, right_align, full_screen

        glass_fonts_backtrack level_range$(unit(u).lv), x2, y1 + 1, 1

        set_font big_font, left_align, full_screen

      glass_fonts "Lv",  x1, y1: cursor_pos(u, 4).y = y1: y1 = y1 + f_row_h

        set_font small_font, right_align, full_screen

        glass_fonts_backtrack stat_range$(unit(u).br), x2, y1 + 1, 1

        set_font big_font, left_align, full_screen

      glass_fonts "Br",  x1, y1: cursor_pos(u, 5).y = y1: y1 = y1 + f_row_h

        set_font small_font, right_align, full_screen

        glass_fonts_backtrack stat_range$(unit(u).fa), x2, y1 + 1, 1

        set_font big_font, left_align, full_screen

      glass_fonts "Fa",  x1, y1: cursor_pos(u, 6).y = y1: y1 = y1 + f_row_h

      glass_fonts "Total",                          x1, y1:                          y1 = y1 + f_row_h



      font_align = right_align

      x1 = ox + 65: y1 = oy + 8

      glass_fonts str$(unit(u).wp.job + unit(u).wp.stat), x1, y1: y1 = y1 + f_row_h

      glass_fonts str$(unit(u).wp.lv),                    x1, y1: y1 = y1 + f_row_h

      glass_fonts str$(unit(u).wp.br),                    x1, y1: y1 = y1 + f_row_h

      glass_fonts str$(unit(u).wp.fa),                    x1, y1: y1 = y1 + f_row_h

      if unit(u).disabled = false then font_using = f_text_blue

      glass_fonts str$(unit(u).wp.total),                x1, y1: y1 = y1 + f_row_h



      draw_job_icon unit(u).job, unit(u).gender, unit(u).disabled, ox + 26, oy - 18, full_screen

      cursor_pos(u, 2).x = ox + 23

      cursor_pos(u, 2).y = oy -  7

  next u



  x1 = 154: y1 = 214

  set_font f_map_white, left_align, full_screen

  glass_fonts_backtrack "Total Work Points", 29, y1, 1



  if total_wp < 59 then font_using = f_map_white else font_using = f_map_grey

  glass_fonts_backtrack "0-58 Failure", x1 + 5, y1 - 10, 1

  if total_wp => 59 and total_wp < 99 then font_using = f_map_white else font_using = f_map_grey

  glass_fonts_backtrack "59-98 Success", x1, y1, 1

  if total_wp => 99 then font_using = f_map_white else font_using = f_map_grey

  glass_fonts_backtrack "99+ Great Success", x1 + 9, y1 + 10, 1



  set_font f_gil_white, center_align, full_screen

  glass_fonts trim$(str$(total_wp)), inthalf(screenw) - 1, y1 - 2



  draw_cursor cursor_pos(cx, cy).x, cursor_pos(cx, cy).y - 1, false



  display_screen

  update_inputs_repeat



  if new_press_repeat(left_key)  = true then cx = wrap(cx - 1, 1, 3)

  if new_press_repeat(right_key) = true then cx = wrap(cx + 1, 1, 3)

  if new_press_repeat(up_key)    = true then

      cy = wrap(cy - 1, 1, 6)

      if cy = 1 or cy = 6 then cx = 1

  end if

  if new_press_repeat(down_key)  = true then

      cy = wrap(cy + 1, 1, 6)

      if cy = 1 or cy = 2 then cx = 1

  end if



  d = 0

  if new_press_repeat(minus_key) = true then d = -1

  if new_press_repeat(plus_key)  = true then d =  1

  if new_press_repeat(enter_key) = true and cy <> 3 and cx + cy > 2 then d = 1



  select case cy

      case 1

        if cx = 2 then console_type      = wrap(console_type + d, psx, psp)

        if cx = 3 then option_window_size = wrap(option_window_size + d, 1, 3): screen scaled_screen(option_window_size)

      case 2: unit(cx).disabled = wrap(unit(cx).disabled + d, true, false)

      case 3: unit(cx).job      = wrap(unit(cx).job      + d, 1, 20)

      case 4: unit(cx).lv      = wrap(unit(cx).lv      + d, 1, 10)

      case 5: unit(cx).br      = wrap(unit(cx).br      + d, 1,  5)

      case 6: unit(cx).fa      = wrap(unit(cx).fa      + d, 1,  5)

  end select



  if d <> 0 then calculate_wp



  if new_press(enter_key) = true and cx + cy = 2 then

      draw_prop_window true

      draw_cursor cursor_pos(cx, cy).x, cursor_pos(cx, cy).y - 1, true

      capture_screen

      prop_menu

      calculate_wp

  end if

  if new_press(enter_key) = true and cy = 3 then

      job_menu cx

      calculate_wp

  end if



loop



system











sub draw_prop_window(dark)



ox = 15: oy = 10

if dark = false then w = win_normal:      set_font f_text_black, left_align, full_screen

if dark = true  then w = win_normal_dark: set_font f_text_dkblue, left_align, full_screen

draw_frame w, ox, oy, 130, 90, full_screen

x1 = ox + 6: y1 = oy + 8

cursor_pos(1, 1).x = ox + 2: cursor_pos(1, 1).y = y1

glass_fonts prop_name$(console_type, proposition), x1, y1: y1 = y1 + f_row_h

if dark = false then font_using = f_text_red

glass_fonts "When",  x1, y1: y1 = y1 + f_row_h

glass_fonts "Type",  x1, y1: y1 = y1 + f_row_h

glass_fonts "Stat",  x1, y1: y1 = y1 + f_row_h

glass_fonts "Reward", x1, y1



if dark = false then font_using = f_text_black

x1 = ox + 44: y1 = oy + 8

y1 = y1 + f_row_h

glass_fonts chapter_name$(console_type, prop_chapter(proposition)), x1, y1: y1 = y1 + f_row_h

glass_fonts type_name$(prop_type(proposition)),                    x1, y1: y1 = y1 + f_row_h

glass_fonts stat_name$(prop_stat(proposition)),                    x1, y1: y1 = y1 + f_row_h

if dark = false then font_using = f_text_blue

glass_fonts reward$(console_type, prop_reward(proposition)),        x1, y1



w = 95: h = 9

x1 = 1 + ((w + 2) * 2 * abs(dark)) + ((w + 2) * (console_type - 1))

y1 = 1 + ((h + 2) * (prop_city(proposition) - 1))

putimage(ox + 2, oy - 4)-step(w, h), city_image, full_screen, (x1, y1)-step(w, h)



end sub





sub draw_city_menu(dark, ox, oy)



if dark = false then w = win_list else w = win_list_dark

draw_frame w, ox, oy, 118, 130, full_screen

x1 = ox + 6: y1 = oy + 13



for n = 1 to 7

  set_font f_text_dkblue, left_align, full_screen

  if dark = false then font_using = f_text_black



  glass_fonts city_name$(console_type, n + city_menu_scroll), x1, y1

  if n = city_menu_cursor - city_menu_scroll and dark = false then draw_cursor ox + 2, y1 - 1, dark

  y1 = y1 + f_row_h

next n



set_font f_map_white, left_align, full_screen

if dark = true then font_using = f_map_grey

glass_fonts_backtrack "City", ox + 2, oy - 4, 1



if dark = true then exit sub



' Scroll arrows

w = 7: h = 15

if city_menu_scroll > 0 then putimage(ox + 111, oy +  13)-step(w, h), data_image, full_screen, (1,        1)-step(w, h)

if city_menu_scroll < 8 then putimage(ox + 111, oy + 104)-step(w, h), data_image, full_screen, (1 + w + 2, 1)-step(w, h)

w = 7: h = 6

putimage(ox + 111, oy + 21 + (city_menu_cursor * 5))-step(w, h), data_image, full_screen, (19, 1)-step(w, h)



end sub





sub prop_menu



city_menu_cursor = prop_city(proposition)

city_ox = 35

city_oy = 30



dim prop_list(8) as byte

dim prop_list_count



update_inputs_repeat



' Select city

do

  limit 60



  city_menu_scroll = min(max(city_menu_scroll, city_menu_cursor - 7), city_menu_cursor - 1)



  restore_screen

  draw_city_menu false, city_ox, city_oy



  display_screen

  update_inputs_repeat



  if new_press_repeat(up_key)  = true then city_menu_cursor = max(city_menu_cursor - 1, 1)

  if new_press_repeat(down_key) = true then city_menu_cursor = min(city_menu_cursor + 1, 15)



  if new_press(esc_key)  = true then exit sub

  if new_press(enter_key) = false then continue



  ' Compile proposition list

  prop_list_count = 0

  for p = 1 to prop_count

      if prop_city(p) <> city_menu_cursor then continue

      prop_list_count = prop_list_count + 1

      prop_list(prop_list_count) = p

  next p

  ' Get dynamic window width from widest text line

  max_width = 0

  for p = 1 to prop_list_count

      max_width = max(max_width, text_width(prop_name$(console_type, prop_list(p)), f_text_black))

  next p



  restore_screen

  draw_city_menu true, city_ox, city_oy

  capture_screen



  ' Select proposition

  prop_menu_cursor = 1

  update_inputs_repeat



  do

      limit 60



      restore_screen

      draw_cursor city_ox + 2, city_oy + 13 + (((city_menu_cursor - city_menu_scroll) - 1) * f_row_h) - 1, true



      ox = 55: oy = 50

      draw_frame win_list, ox, oy, max_width + 15, (prop_list_count * f_row_h) + 18, full_screen

      x1 = ox + 6: y1 = oy + 13



      for n = 1 to prop_list_count

        set_font f_text_black, left_align, full_screen

        glass_fonts prop_name$(console_type, prop_list(n)), x1, y1

        if n = prop_menu_cursor then draw_cursor ox + 2, y1 - 1, false

        y1 = y1 + f_row_h

      next n



      set_font f_map_white, left_align, full_screen

      if console_type = psx then t$ = "Proposition" else t$ = "Errand"

      glass_fonts_backtrack t$, ox + 2, oy - 4, 1



      display_screen

      update_inputs_repeat



      if new_press_repeat(up_key)    = true then prop_menu_cursor = wrap(prop_menu_cursor - 1, 1, prop_list_count)

      if new_press_repeat(down_key)  = true then prop_menu_cursor = wrap(prop_menu_cursor + 1, 1, prop_list_count)



      if new_press(esc_key)  = true then exit do

      if new_press(enter_key) = true then proposition = prop_list(prop_menu_cursor): exit sub

  loop

loop



end sub





sub job_menu(u)



' Set of references to jobs on ring, since bard and dancer must occupy the same position

temp_g = unit(u).gender

dim ring_ref(19) as byte

dim wp_preview$(19)



for n = 1 to 19

  n1 = n

  if n = 19 then n1 = 20

  if n = 18 and temp_g = g_female then n1 = j_dc

  ring_ref(n) = n1

  wp_preview$(n) = trim$(str$(type_job_wp(prop_type(proposition), n1) + stat_job_wp(prop_stat(proposition), n1)))

next n



' Using current job, find initial cursor position

for n = 1 to 19

  if unit(u).job = ring_ref(n) then j = n

next n

if j = false then j = j_sq ' Prevent somehow failing, such as having male dancer or female bard



update_inputs_repeat

wp_dx =  10 ' Position of work point text above each job

wp_dy = -13



do

  limit 60



  putimage(0, 0)-(screenw - 1, screenh - 1), job_background, full_screen, (0, 0)-(screenw - 1, screenh - 1)



  set_font f_map_white, center_align, full_screen

  for n = 9 to 0 step -1

      p = wrap(-n, 0, 18)

      draw_job_icon ring_ref(wrap(j - n, 1, 19)), temp_g, false, ring_pos(p, 0).x, ring_pos(p, 0).y, full_screen

      glass_fonts_backtrack wp_preview$(wrap(j - n, 1, 19)), ring_pos(p, 0).x + wp_dx, ring_pos(p, 0).y + wp_dy, 1

      if n = 0 then continue

      draw_job_icon ring_ref(wrap(j + n, 1, 19)), temp_g, false, ring_pos(n, 0).x, ring_pos(n, 0).y, full_screen

      glass_fonts_backtrack wp_preview$(wrap(j + n, 1, 19)), ring_pos(n, 0).x + wp_dx, ring_pos(n, 0).y + wp_dy, 1

  next n

  draw_job_icon unit(u).job, unit(u).gender, false, ring_center_x, ring_center_y, full_screen

  glass_fonts_backtrack wp_preview$(unit(u).job), ring_center_x + wp_dx, ring_center_y + wp_dy, 1



  draw_frame win_normal, 83, 207, 90, 27, full_screen

  set_font f_text_black, center_align, full_screen

  glass_fonts job_name$(console_type, ring_ref(j)), inthalf(screenw), 217

  putimage(3, 224)-(80, 236), data_image, full_screen, (1, 18)-(78, 30) ' Gender UI



  display_screen

  update_inputs_repeat



  if press(left_key) = true then

      for f = 1 to interp_frames

        limit 60

        putimage(0, 0)-(screenw - 1, screenh - 1), job_background, full_screen, (0, 0)-(screenw - 1, screenh - 1)

        set_font f_map_white, center_align, full_screen

        for n = 9 to 0 step -1

            p = wrap(-n, 0, 18)

            draw_job_icon ring_ref(wrap(j - n, 1, 19)), temp_g, false, ring_pos(p, f).x, ring_pos(p, f).y, full_screen

            glass_fonts_backtrack wp_preview$(wrap(j - n, 1, 19)), ring_pos(p, f).x + wp_dx, ring_pos(p, f).y + wp_dy, 1

            if n = 0 then continue

            draw_job_icon ring_ref(wrap(j + n, 1, 19)), temp_g, false, ring_pos(n, f).x, ring_pos(n, f).y, full_screen

            glass_fonts_backtrack wp_preview$(wrap(j + n, 1, 19)), ring_pos(n, f).x + wp_dx, ring_pos(n, f).y + wp_dy, 1

        next n

        draw_job_icon unit(u).job, unit(u).gender, false, ring_center_x, ring_center_y, full_screen

        glass_fonts_backtrack wp_preview$(unit(u).job), ring_center_x + wp_dx, ring_center_y + wp_dy, 1



        draw_frame win_normal, 83, 207, 90, 27, full_screen

        set_font f_text_black, center_align, full_screen

        glass_fonts job_name$(console_type, ring_ref(j)), inthalf(screenw), 217

        putimage(3, 224)-(80, 236), data_image, full_screen, (1, 18)-(78, 30) ' Gender UI

        display_screen

      next f

      j = wrap(j - 1, 1, job_count - 1)

  end if



  if press(right_key) = true then

      j = wrap(j + 1, 1, job_count - 1)

      for f = interp_frames to 1 step -1

        limit 60

        putimage(0, 0)-(screenw - 1, screenh - 1), job_background, full_screen, (0, 0)-(screenw - 1, screenh - 1)

        set_font f_map_white, center_align, full_screen

        for n = 9 to 0 step -1

            p = wrap(-n, 0, 18)

            draw_job_icon ring_ref(wrap(j - n, 1, 19)), temp_g, false, ring_pos(p, f).x, ring_pos(p, f).y, full_screen

            glass_fonts_backtrack wp_preview$(wrap(j - n, 1, 19)), ring_pos(p, f).x + wp_dx, ring_pos(p, f).y + wp_dy, 1

            if n = 0 then continue

            draw_job_icon ring_ref(wrap(j + n, 1, 19)), temp_g, false, ring_pos(n, f).x, ring_pos(n, f).y, full_screen

            glass_fonts_backtrack wp_preview$(wrap(j + n, 1, 19)), ring_pos(n, f).x + wp_dx, ring_pos(n, f).y + wp_dy, 1

        next n

        draw_job_icon unit(u).job, unit(u).gender, false, ring_center_x, ring_center_y, full_screen

        glass_fonts_backtrack wp_preview$(unit(u).job), ring_center_x + wp_dx, ring_center_y + wp_dy, 1



        draw_frame win_normal, 83, 207, 90, 27, full_screen

        set_font f_text_black, center_align, full_screen

        glass_fonts job_name$(console_type, ring_ref(wrap(j - 1, 1, job_count - 1))), inthalf(screenw), 217

        putimage(3, 224)-(80, 236), data_image, full_screen, (1, 18)-(78, 30) ' Gender UI

        display_screen

      next f

  end if



  if new_press(up_key) = true or new_press(down_key) = true then

      temp_g = toggle(temp_g, g_male, g_female)

      if temp_g = g_male then ring_ref(18) = j_bd else ring_ref(18) = j_dc

      wp_preview$(18) = trim$(str$(type_job_wp(prop_type(proposition), ring_ref(18)) + stat_job_wp(prop_stat(proposition), ring_ref(18))))

  end if



  if new_press(esc_key)  = true then exit sub

  if new_press(enter_key) = true then exit do

loop



unit(u).job    = ring_ref(j)

unit(u).gender = temp_g



end sub





sub draw_job_icon(j, gender, dark, x, y, d~&)

' j is job, dark is true if dark version should be used



' Blob shadow

preserve& = dest

dest full_screen

source full_screen



for y1 = 0 to 9: for x1 = 0 to 19

  v = blob_shadow(dark, x1, y1)

  if v = 0 then continue

  shx = x + x1 - 1: shy = y + y1 + 28

  pset(shx, shy), rgba32(max(0, red(point(shx, shy)) - v), max(0, green(point(shx, shy)) - v), max(0, blue(point(shx, shy)) - v), 255)

next x1: next y1



dest preserve&



x1 = 1 + ((j - 1) * (job_width  + 2))

y1 = 1 + ((gender - 1) * (job_height + 2)) + ((2 * (job_height + 2)) * abs(dark))

putimage(x, y)-step(job_width, job_height), job_image, d~&, (x1, y1)-step(job_width, job_height)



end sub





sub draw_cursor(x, y, dark)



if dark = false then set_font f_text_black,  right_align, cursor_layer: dx = cursor_anim((timer * 60) mod 46)

if dark = true  then set_font f_text_dkblue, right_align, full_screen:  dx = -1

glass_fonts "@", x + dx, y



preserve& = dest

dest full_screen

source full_screen



for y1 = 0 to 12: for x1 = 0 to 16

  v = finger_shadow(dark, x1, y1)

  if v = 0 then continue

  shx = x + dx + x1 - 14: shy = y + y1

  pset(shx, shy), rgba32(max(0, red(point(shx, shy)) - v), max(0, green(point(shx, shy)) - v), max(0, blue(point(shx, shy)) - v), 255)

next x1: next y1



dest preserve&



end sub





sub calculate_wp



subtotal_wp = 0

total_wp    = 0



for u = 1 to 3

  unit(u).wp.job      = 0

  unit(u).wp.stat    = 0

  unit(u).wp.lv      = 0

  unit(u).wp.br      = 0

  unit(u).wp.fa      = 0

  unit(u).wp.subtotal = 0

  unit(u).wp.total    = 0



  j = unit(u).job

  if j <> false then

      s = prop_stat(proposition)

      unit(u).wp.job      = type_job_wp(prop_type(proposition), j)

      unit(u).wp.stat    = stat_job_wp(s, j)

      unit(u).wp.lv      = stat_lv_wp(s, unit(u).lv)

      unit(u).wp.br      = stat_br_wp(s, unit(u).br)

      unit(u).wp.fa      = stat_fa_wp(s, unit(u).fa)

      unit(u).wp.subtotal = unit(u).wp.lv + unit(u).wp.br + unit(u).wp.fa

      unit(u).wp.total    = unit(u).wp.subtotal + unit(u).wp.job + unit(u).wp.stat

  end if



  if unit(u).disabled = false then

      subtotal_wp = subtotal_wp + unit(u).wp.subtotal

      total_wp    = total_wp    + unit(u).wp.total

  end if

next u



end sub





function right_num$(v, w)

t$ = trim$(str$(v))

right_num$ = space$(max(w - len(t$), 0)) + t$

end function





sub draw_frame(f, ox, oy, win_w, win_h, d~&)



preserve& = dest

dest frame_assembly

dontblend



' Piece dimensions

w1 = window_piece(f, 1).x: h1 = window_piece(f, 1).y

w2 = window_piece(f, 2).x: h2 = window_piece(f, 2).y

w3 = window_piece(f, 3).x: h3 = window_piece(f, 3).y



' Required size of center bands based on size of edges

center_w = win_w - w1 - w3 - 2

center_h = win_h - h1 - h3 - 2

center_cols = int(center_w / max(1, w2 + 1)) + 1 ' Overdrawing by one is fine



' Top corners and edge

draw_winp f, 0, 0, 1, 1

x = w1 + 1

for n = 1 to center_cols

  draw_winp f, x, 0, 2, 1

  x = x + w2 + 1

next n

draw_winp f, win_w - 1 - w3, 0, 3, 1



' Middle row

y = h1 + 1

for row = 1 to int(center_h / max(1, h2 + 1)) + 1

  draw_winp f, 0, y, 1, 2

  x = w1 + 1

  for n = 1 to center_cols

      draw_winp f, x, y, 2, 2

      x = x + w2 + 1

  next n

  draw_winp f, win_w - 1 - w3, y, 3, 2

  y = y + h2 + 1

next row



' Bottom row

y = win_h - 1 - h3

draw_winp f, 0, y, 1, 3

x = w1 + 1

for n = 1 to center_cols

  draw_winp f, x, y, 2, 3

  x = x + w2 + 1

next n

draw_winp f, win_w - 1 - w3, y, 3, 3



blend

dest preserve&



' Copy finished window to screen

putimage(ox, oy)-step(win_w - 1, win_h - 1), frame_assembly, d~&, (0, 0)-step(win_w - 1, win_h - 1)



end sub





sub draw_winp(f, x, y, x2, y2)



dim x(3): dim y(3)

' Source image coordinates

x(1) =        window_piece(f, 0).x:    y(1) =        window_piece(f, 0).y

x(2) = x(1) + window_piece(f, 1).x + 2: y(2) = y(1) + window_piece(f, 1).y + 2

x(3) = x(2) + window_piece(f, 2).x + 2: y(3) = y(2) + window_piece(f, 2).y + 2



w = window_piece(f, x2).x: h = window_piece(f, y2).y

line(x, y)-step(w, h), rgba32(0, 0, 0, 0), bf

putimage(x, y)-step(w, h), window_image, frame_assembly, (x(x2), y(y2))-step(w, h)



end sub





sub set_window(w, x0, y0, w1, h1, w2, h2, w3, h3)

window_piece(w, 0).x = x0

window_piece(w, 0).y = y0

window_piece(w, 1).x = w1

window_piece(w, 1).y = h1

window_piece(w, 2).x = w2

window_piece(w, 2).y = h2

window_piece(w, 3).x = w3

window_piece(w, 3).y = h3

end sub





sub display_screen



putimage(0, 0)-(screenw - 1, screenh - 1), full_screen,  final_screen, (0, 0)-(screenw - 1, screenh - 1)

putimage(0, 0)-(screenw - 1, screenh - 1), cursor_layer, final_screen, (0, 0)-(screenw - 1, screenh - 1)

clear_image cursor_layer

hardware_image = copyimage(final_screen, 33)

putimage(0, 0)-((screenw * option_window_size) - 1, (screenh * option_window_size) - 1), hardware_image

display

freeimage hardware_image



end sub





sub clear_image(d&)

preserve& = dest

dest d&

cls , rgba32(0, 0, 0, 0)

dest preserve&

end sub





sub capture_screen

clear_image store_screen

putimage(0, 0)-(screenw - 1, screenh - 1), full_screen, store_screen, (0, 0)-(screenw - 1, screenh - 1)

end sub





sub restore_screen

clear_image full_screen

putimage(0, 0)-(screenw - 1, screenh - 1), store_screen, full_screen, (0, 0)-(screenw - 1, screenh - 1)

end sub





sub glass_fonts_backtrack(t1$, x1, y1, backtrack)

' Special version, last parameter is number of pixels to backtrack per character



t$ = t1$

carriage = true

if right$(t$, 1) = ";" then

  carriage = false

  t$ = left$(t$, len(t$) - 1)

end if



x = x1: y = y1

f = font_using



if font_align <> left_align then

  ' Adjust starting point based on line width, for center or right align

  w = text_width(t$, f) - (len(t$) * backtrack)

  if font_align = center_align then w = int(w * 0.5)

  x = x - w

end if



for n = 1 to len(t$)

  c = asc(mid$(t$, n, 1))

  w = g_font(f, c).w

  putimage(x, y)-step(w, g_font(f, 0).h), g_font(f, 0).image, font_dest, (g_font(f, c).pos.x, g_font(f, c).pos.y)-step(w, g_font(f, 0).h)

  x = x + w + 1 - backtrack

next n



font_x = x1

font_y = y1

if carriage = false then font_x = x

if carriage = true  then font_y = y1 + g_font(f, 0).h



end sub





sub update_inputs_repeat



update_inputs

for b = 1 to keybind_count

  key_held(b) = key_held(b) + 1

  if hold(b) = false then key_held(b) = 0

  if key_held(b) > repeat_key then key_held(b) = repeat_key - repeat_speed

next b



end sub





function new_press_repeat(b)

new_press_repeat = false

if new_press(b) = true or key_held(b) => repeat_key then new_press_repeat = true

end function





sub mfi_loader(f$)



mfi = freefile



open f$ for binary as #mfi

get #mfi, , mfi_count

for i = 1 to mfi_count

  get #mfi, , mfi_o(i)

  get #mfi, , mfi_s(i)

  mfi_o(i) = mfi_o(i) + 1

next i



mfi_index = 1



' ----- Images -----



g_font(f_text_black,  0).image = load_gfx(mfi)

g_font(f_text_red,    0).image = load_gfx(mfi)

g_font(f_text_blue,  0).image = load_gfx(mfi)

g_font(f_text_dkblue, 0).image = load_gfx(mfi)

g_font(f_gil_white,  0).image = load_gfx(mfi)

g_font(f_map_white,  0).image = load_gfx(mfi)

g_font(f_map_grey,    0).image = load_gfx(mfi)

g_font(f_map_black,  0).image = load_gfx(mfi)

g_font(f_map_dkblue,  0).image = load_gfx(mfi)



bar_background = load_gfx(mfi)

job_background = load_gfx(mfi)

job_image      = load_gfx(mfi)

window_image  = load_gfx(mfi)

city_image    = load_gfx(mfi)

data_image    = load_gfx(mfi)



if fileexists("mfi_temp.dat") then kill "mfi_temp.dat"



end sub





function load_gfx&(mfi)



if fileexists("mfi_temp.dat") then kill "mfi_temp.dat"

mfidata = freefile



open "mfi_temp.dat" for binary as #mfidata

dat$ = space$(mfi_s(mfi_index))

get #mfi, mfi_o(mfi_index), dat$

put #mfidata, , dat$



close #mfidata

load_gfx& = loadimage("mfi_temp.dat", 32)



mfi_index = mfi_index + 1



end function





function load_sfx&(mfi)



if fileexists("mfi_temp.dat") then kill "mfi_temp.dat"

mfidata = freefile



open "mfi_temp.dat" for binary as #mfidata

dat$ = space$(mfi_s(mfi_index))

get #mfi, mfi_o(mfi_index), dat$

put #mfidata, , dat$



close #mfidata

load_sfx& = sndopen("mfi_temp.dat")



mfi_index = mfi_index + 1



end function





sub set_keybinds



' Default keybinds

d = keyboard

keybind_name$(up_key)    = "UP":    keybind_default(up_key,    d) = 329

keybind_name$(down_key)  = "DOWN":  keybind_default(down_key,  d) = 337

keybind_name$(left_key)  = "LEFT":  keybind_default(left_key,  d) = 332

keybind_name$(right_key) = "RIGHT": keybind_default(right_key,  d) = 334

keybind_name$(minus_key) = "MINUS": keybind_default(minus_key,  d) = 13 ' Near backspace, not on numpad

keybind_name$(plus_key)  = "PLUS":  keybind_default(plus_key,  d) = 14

keybind_name$(f1_key)    = "F1":    keybind_default(f1_key,    d) = 60

keybind_name$(enter_key) = "ENTER": keybind_default(enter_key,  d) = 29

keybind_name$(esc_key)  = "ESC":  keybind_default(esc_key,    d) = 2



' On launch, start with defaults

set_default_keybinds



end sub





sub set_type_job_wp(t, jsq, jch, jkn, jar, jmk, jpr, jwz, jtm, jsu, jth, jme, jor, jge, jln, jsm, jnj, jcl, jbd, jdc, jmi)



type_job_wp(t, j_sq) = jsq

type_job_wp(t, j_ch) = jch

type_job_wp(t, j_kn) = jkn

type_job_wp(t, j_ar) = jar

type_job_wp(t, j_mk) = jmk

type_job_wp(t, j_pr) = jpr

type_job_wp(t, j_wz) = jwz

type_job_wp(t, j_tm) = jtm

type_job_wp(t, j_su) = jsu

type_job_wp(t, j_th) = jth

type_job_wp(t, j_me) = jme

type_job_wp(t, j_or) = jor

type_job_wp(t, j_ge) = jge

type_job_wp(t, j_ln) = jln

type_job_wp(t, j_sm) = jsm

type_job_wp(t, j_nj) = jnj

type_job_wp(t, j_cl) = jcl

type_job_wp(t, j_bd) = jbd

type_job_wp(t, j_dc) = jdc

type_job_wp(t, j_mi) = jmi



end sub





sub set_prop_wp



' ----- Proposition types -----



'                        Sq  Ch  Kn  Ar  Mk  Pr  Wz  TM  Su  Th  Me  Or  Ge  Ln  Sm  Nj  Cl  Bd  Dc  Mi

set_type_job_wp salvage,  8, 10, 10,  2, 10,  5,  5, 15,  5,  8,  0,  5, 15,  2,  5,  5, 15,  0,  0, 10

set_type_job_wp mining,  8, 10,  5,  2, 10, 10,  5,  5,  5,  8,  0, 10, 15,  2, 10,  5,  5,  0,  0, 10

set_type_job_wp explore,  8,  5, 10, 15,  5,  5, 15,  5,  5,  5,  0, 10, 15, 10,  2,  5, 10,  0,  5,  0

set_type_job_wp combat,  8,  5, 15,  5, 15,  5,  5,  5, 10,  8,  0,  2,  0, 15, 15, 20,  5,  5,  5,  0

set_type_job_wp invest,  8,  5,  2,  5,  2,  5,  2,  2,  5, 10, 15, 10,  0,  5,  5,  5,  5, 10, 10,  0

set_type_job_wp invest2,  8,  5,  2,  5,  2, 15,  2,  8,  5,  5, 15,  5, 10,  5,  5,  5, 10,  5,  5,  0

set_type_job_wp oddjob,  8, 15,  2,  5,  2,  5,  5,  5,  5, 15, 15,  2,  0,  2,  2,  5,  5, 10, 10, 10

set_type_job_wp contest,  8,  5, 15,  5, 15,  5,  5, 10,  5,  5,  5,  5,  0, 15, 15, 15,  5,  5,  0, 10



' ----- Preferred stats with job and stat bonuses -----



s = neutral

stat_job_wp(s, j_sq) = 10: stat_br_wp(s, 1)  = 10

stat_job_wp(s, j_ch) =  5: stat_br_wp(s, 2)  = 10

stat_job_wp(s, j_kn) =  5: stat_br_wp(s, 3)  = 10

stat_job_wp(s, j_ar) = 10: stat_br_wp(s, 4)  = 10

stat_job_wp(s, j_mk) =  5: stat_br_wp(s, 5)  = 10

stat_job_wp(s, j_pr) =  5:    stat_fa_wp(s, 1)  = 10

stat_job_wp(s, j_wz) =  5:    stat_fa_wp(s, 2)  = 10

stat_job_wp(s, j_tm) =  5:    stat_fa_wp(s, 3)  = 10

stat_job_wp(s, j_su) =  5:    stat_fa_wp(s, 4)  = 10

stat_job_wp(s, j_th) = 10:    stat_fa_wp(s, 5)  = 10

stat_job_wp(s, j_me) = 10:      stat_lv_wp(s,  1) =  5

stat_job_wp(s, j_or) =  5:      stat_lv_wp(s,  2) =  5

stat_job_wp(s, j_ge) =  5:      stat_lv_wp(s,  3) =  8

stat_job_wp(s, j_ln) =  5:      stat_lv_wp(s,  4) = 10

stat_job_wp(s, j_sm) =  0:      stat_lv_wp(s,  5) = 15

stat_job_wp(s, j_nj) =  5:      stat_lv_wp(s,  6) = 20

stat_job_wp(s, j_cl) =  5:      stat_lv_wp(s,  7) = 10

stat_job_wp(s, j_bd) = 10:      stat_lv_wp(s,  8) = 10

stat_job_wp(s, j_dc) = 10:      stat_lv_wp(s,  9) = 10

stat_job_wp(s, j_mi) = 20:      stat_lv_wp(s, 10) = 10



s = brave

stat_job_wp(s, j_sq) = 10: stat_br_wp(s, 1)  =  5

stat_job_wp(s, j_ch) =  0: stat_br_wp(s, 2)  =  8

stat_job_wp(s, j_kn) = 10: stat_br_wp(s, 3)  = 10

stat_job_wp(s, j_ar) =  5: stat_br_wp(s, 4)  = 15

stat_job_wp(s, j_mk) = 10: stat_br_wp(s, 5)  = 20

stat_job_wp(s, j_pr) =  0:    stat_fa_wp(s, 1)  = 20

stat_job_wp(s, j_wz) =  0:    stat_fa_wp(s, 2)  = 15

stat_job_wp(s, j_tm) =  0:    stat_fa_wp(s, 3)  = 10

stat_job_wp(s, j_su) =  0:    stat_fa_wp(s, 4)  =  8

stat_job_wp(s, j_th) =  5:    stat_fa_wp(s, 5)  =  5

stat_job_wp(s, j_me) =  0:      stat_lv_wp(s,  1) =  5

stat_job_wp(s, j_or) =  0:      stat_lv_wp(s,  2) =  8

stat_job_wp(s, j_ge) =  0:      stat_lv_wp(s,  3) = 10

stat_job_wp(s, j_ln) = 10:      stat_lv_wp(s,  4) = 15

stat_job_wp(s, j_sm) =  5:      stat_lv_wp(s,  5) = 20

stat_job_wp(s, j_nj) = 10:      stat_lv_wp(s,  6) = 20

stat_job_wp(s, j_cl) =  0:      stat_lv_wp(s,  7) = 15

stat_job_wp(s, j_bd) =  5:      stat_lv_wp(s,  8) = 10

stat_job_wp(s, j_dc) =  5:      stat_lv_wp(s,  9) =  8

stat_job_wp(s, j_mi) =  0:      stat_lv_wp(s, 10) =  5



s = faith

stat_job_wp(s, j_sq) = 10: stat_br_wp(s, 1)  = 20

stat_job_wp(s, j_ch) = 10: stat_br_wp(s, 2)  = 15

stat_job_wp(s, j_kn) =  0: stat_br_wp(s, 3)  = 10

stat_job_wp(s, j_ar) =  0: stat_br_wp(s, 4)  =  8

stat_job_wp(s, j_mk) =  0: stat_br_wp(s, 5)  =  5

stat_job_wp(s, j_pr) = 10:    stat_fa_wp(s, 1)  =  5

stat_job_wp(s, j_wz) = 10:    stat_fa_wp(s, 2)  =  8

stat_job_wp(s, j_tm) = 10:    stat_fa_wp(s, 3)  = 10

stat_job_wp(s, j_su) = 10:    stat_fa_wp(s, 4)  = 15

stat_job_wp(s, j_th) =  0:    stat_fa_wp(s, 5)  = 20

stat_job_wp(s, j_me) =  5:      stat_lv_wp(s,  1) = 10

stat_job_wp(s, j_or) = 10:      stat_lv_wp(s,  2) = 10

stat_job_wp(s, j_ge) = 10:      stat_lv_wp(s,  3) = 10

stat_job_wp(s, j_ln) =  0:      stat_lv_wp(s,  4) = 10

stat_job_wp(s, j_sm) = 10:      stat_lv_wp(s,  5) = 10

stat_job_wp(s, j_nj) =  5:      stat_lv_wp(s,  6) =  0

stat_job_wp(s, j_cl) = 10:      stat_lv_wp(s,  7) = 20

stat_job_wp(s, j_bd) =  5:      stat_lv_wp(s,  8) = 15

stat_job_wp(s, j_dc) =  5:      stat_lv_wp(s,  9) = 10

stat_job_wp(s, j_mi) =  0:      stat_lv_wp(s, 10) =  8



end sub





sub set_jn(j, nx$, np$)

job_name$(psx, j) = nx$

job_name$(psp, j) = np$

end sub





sub add_prop(nx$, np$, chapter, ptype, pstat, preward)



prop_i = prop_i + 1

prop_name$(psx, prop_i) = nx$

prop_name$(psp, prop_i) = np$

prop_chapter(prop_i)    = chapter

prop_type(prop_i)      = ptype

prop_stat(prop_i)      = pstat

prop_reward(prop_i)    = preward

prop_city(prop_i)      = prop_c



end sub





sub set_prop_data



prop_i = 0



prop_c = igros

add_prop "Girl at Gulg Volcano",      "Mount Gulg Mother Lode",        ch2,    mining,  brave,  item

add_prop "Sad Traveling Artist",      "Minstrel in Distress",          ch3,    oddjob,  faith,  0

add_prop "Traveling Artist Mameko",  "Mameco the Minstrel",          ch3,    oddjob,  neutral, 0

add_prop "Ringing of the Bell",      "Guard Duty",                    ch3b,  oddjob,  faith,  item

add_prop "Legendary Monster",        "Hellspawned Beast",            ch4,    combat,  faith,  0

add_prop "Sullen Experiment",        "Metamorphosed Misery",          ch4,    combat,  neutral, 0

add_prop "Thief Zero Reborn!",        "Zerro Strikes Again",          ch4,    combat,  brave,  item

add_prop "Legendary Traces",          "Ancient Wonder",                ch4b,  explore, neutral, land



prop_c = gariland

add_prop "Orders of the Coast Guard", "Shoreline Defense",            ch2,    invest2, neutral, 0

add_prop "Testimony of an Ex-miner",  "Miner's Tale",                  ch2,    mining,  neutral, 0

add_prop "Stolen Ancient Writings",  "Stolen Tomes",                  ch3,    salvage, neutral, 0

add_prop "Master Math!",              "Arithmeticks Tutor Wanted",    ch4,    oddjob,  faith,  0

add_prop "Win the Magic Contest!",    "Magick Melee",                  virgo,  contest, faith,  item



prop_c = dorter

add_prop "Trap of the Bandits",      "Bandits",                      ch2,    combat,  faith,  0

add_prop "Discovery Race",            "Frontier Marathon",            ch3,    explore, neutral, land

add_prop "Discovery Race 2",          "Second Frontier Marathon",      ch3,    explore, neutral, land

add_prop "Discovery Race 3",          "Third Frontier Marathon",      ch3,    explore, neutral, land

add_prop "Minimum's Melancholy",      "Count Minimas",                ch4,    oddjob,  brave,  item

add_prop "Minimum's Melancholy",      "Count Minimas",                ch4,    oddjob,  brave,  item

add_prop "Minimum's Melancholy",      "Count Minimas",                ch4,    combat,  neutral, 0



prop_c = zaland

add_prop "Salvage the Trade Ship!",  "The Hindenburg",                ch2,    salvage, faith,  0

add_prop "Zaland Embassy",            "Zaland Embassy Antiques",      ch2,    salvage, neutral, item

add_prop "Rolade Ore Company",        "Lorraide Mine",                ch3,    mining,  brave,  0

add_prop "Deep in Sweegy Woods",      "The Siedge Weald",              ch3b,  explore, neutral, land

add_prop "Shy Katedona",              "Cattedona",                    ch4b,  oddjob,  faith,  0

add_prop "Win the Zaland Fight!",    "The Zaland Melee",              aries,  contest, brave,  0



prop_c = lionel

add_prop "My Little Carrot",          "My Little Carrot",              ch2,    invest,  neutral, 0

add_prop "Trade Ship Douing",        "The Dawn Queen",                ch3,    salvage, neutral, 0

add_prop "Challenge of Zero",        "Zerro's Challenge",            ch3,    combat,  brave,  item

add_prop "I saw it.",                "The Trick of Light",            ch3b,  explore, neutral, land

add_prop "Storm of Zigolis!",        "Fenland Mystery",              ch3b,  explore, faith,  land

add_prop "Protect the Little Life",  "Father's Nightmare",            ch4,    invest,  neutral, item

add_prop "Emissary of Lionel",        "Lionel Emissary",              ch4b,  salvage, neutral, item



prop_c = goug

add_prop "Vacancy!",                  "Miner Shortage",                ch2,    mining,  neutral, 0

add_prop "Heir of Mesa",              "Masa's Legacy",                ch3,    salvage, neutral, 0

add_prop "Machinist Contest",        "Clockwork Faire",              ch3,    oddjob,  neutral, item

add_prop "Salvage the Trade Ship!",  "The Durga",                    ch4,    salvage, brave,  item

add_prop "Devil in the Dark",        "Devil in the Dark",            ch4,    invest2, neutral, 0

add_prop "Meister Contest",          "Arteficer's Contest",          sagit,  contest, neutral, 0



prop_c = warjilis

add_prop "Destiny of the Company",    "The Highwind",                  ch2,    salvage, faith,  0

add_prop "Concerns of a Merchant",    "Merchant's Regret",            ch3,    explore, neutral, land

add_prop "Mountain of Rain",          "Rain-Swept Slopes",            ch4,    explore, brave,  land

add_prop "Within the Darkness",      "In the Darkness",              ch4,    combat,  faith,  0

add_prop "True Romance",              "True Romance",                  ch4,    oddjob,  neutral, item

add_prop "Wandering Gambler",        "Wandering Gambler",            ch4,    oddjob,  neutral, 0



prop_c = goland

add_prop "Will of Elder Topa",        "Old Tappa's Will",              ch3,    mining,  brave,  0

add_prop "Miners Wanted!",            "Coal Miners Wanted",            ch4,    mining,  brave,  0

add_prop "Miners Wanted! 2",          "More Coal Miners Wanted",      ch4,    mining,  brave,  item

add_prop "Adventurer Ramzen",        "Lamzen the Adventurer",        ch4,    explore, neutral, land

add_prop "Defeat Golden Gotsko!",    "Twilight Gustkov",              ch4b,  combat,  neutral, 0

add_prop "Terror of Assault Cave",    "Terror's Maw",                  ch4b,  combat,  faith,  0

add_prop "Dream of a Miner",          "Miner's Dream",                ch4b,  mining,  neutral, 0



prop_c = lesalia

add_prop "Sunken Salvage Tour",      "Salvage Expedition",            ch3,    salvage, neutral, item

add_prop "Mine Excavation Tour",      "Abandoned Mine",                ch3,    mining,  neutral, item

add_prop "Discovery Tour",            "Frontier Expedition",          ch4,    explore, neutral, land

add_prop "Thief Zero Returns!",      "Zerro's Return",                ch4,    combat,  brave,  item

add_prop "If wishes come true",      "Ducal Disaster",                ch4b,  invest,  neutral, 0

add_prop "Son, Pappal!",              "Young Lord Pappal",            ch4b,  combat,  brave,  0

add_prop "Secret Door",              "Cries in the Dark",            ch4b,  invest2, neutral, 0



prop_c = yardow

add_prop "Sailor Tour",              "Diving Expedition",            ch3b,  salvage, brave,  0

add_prop "Envoy ship, Falcon",        "The Falcon",                    ch4,    salvage, brave,  item

add_prop "Good Workplace and Job!",  "Salvage Work",                  ch4b,  salvage, neutral, 0

add_prop "Miner's Tour",              "Coal Mining Expedition",        ch4b,  mining,  neutral, 0

add_prop "Miner's Tour 2",            "Second Coal Mining Expedition", ch4b,  mining,  neutral, item

add_prop "Win the Yardow Fight!",    "The Yardrow Melee",            cancer, contest, brave,  item



prop_c = bervenia

add_prop "Hidden Trap at the Maze",  "Endless Caverns",              ch4,    mining,  neutral, item

add_prop "One Activity",              "Past Glory",                    ch4,    mining,  brave,  item

add_prop "Ruins at Bed Desert",      "Beddha Sandwaste",              ch4,    explore, neutral, land

add_prop "Adventurer Wanted!",        "Adventurers Wanted",            ch4,    explore, neutral, land

add_prop "I saw it! I swear!",        "Shadows from the Past",        ch4,    explore, neutral, land

add_prop "Defeat Behemoth!",          "The Behemoth",                  ch4b,  combat,  brave,  0



prop_c = riovanes

add_prop "Sea of Gredia Island",      "Gleddia Isle",                  ch4,    salvage, faith,  item

add_prop "Stranded Trade Ship",      "Foundered Vessel",              ch4,    salvage, faith,  0

add_prop "Fiar's Request",            "Fia's Wish",                    ch4,    combat,  neutral, 0

add_prop "Secret Society",            "Secret Society",                ch4,    invest2, brave,  0

add_prop "Letter to My Love",        "Lettre d'amour",                ch4,    oddjob,  neutral, item

add_prop "The Greatest Plan",        "Historic Revolt",              ch4b,  invest2, neutral, item

add_prop "Hard Lecture",              "Tutoring",                      ch4b,  oddjob,  faith,  0



prop_c = zeltennia

add_prop "Larner Channel Waves",      "Rhana Straight",                ch4,    salvage, faith,  item

add_prop "Mother",                    "Nightwalker",                  ch4,    invest2, neutral, 0

add_prop "Phantom Thief Zero!",      "Zerro Strikes",                ch4,    combat,  brave,  item

add_prop "Attractive Workplace",      "Dredge Work",                  ch4b,  salvage, brave,  0

add_prop "Dream child",              "Missing Boy",                  ch4b,  invest,  neutral, 0

add_prop "How much is Life worth?",  "Appraisal",                    ch4b,  invest2, neutral, item



prop_c = zarghidas

add_prop "Himka Cliffs",              "Himca Cliffs",                  ch4,    mining,  neutral, item

add_prop "The Lord's Ore",            "Ore of the Gods",              ch4,    mining,  neutral, item

add_prop "Death Canyon",              "Death's Gorge",                ch4b,  mining,  neutral, 0

add_prop "Defeat Whirlwind Karz!",    "The Typhoon",                  ch4b,  combat,  brave,  0

add_prop "Road of Beasts",            "Beastly Trail",                ch4b,  oddjob,  faith,  0

add_prop "Memories",                  "Memories",                      ch4b,  oddjob,  neutral, 0



prop_c = limberry

add_prop "Poeskas Lake Bottom",      "Lake Poescas Depths",          ch4b,  explore, brave,  land

add_prop "Ominous Dungeon",          "Cellar Dungeon",                ch4b,  explore, neutral, land

add_prop "My treasure",              "Uninvited Guests",              ch4b,  invest2, neutral, 0

add_prop "Chocobo Restaurant",        "Gysahl Greens",                ch4b,  oddjob,  brave,  item

add_prop "Wandering Gambler",        "Wandering Gambler",            ch4b,  oddjob,  neutral, 0

add_prop "Thief Zero's Last Stand",  "Zerro's Final Heist",          ch4b,  combat,  brave,  0



end sub





' Input handling routine library - keyboard, gamepad, mouse



' NOTE: Mouse not yet implemented.



' NOTE: Keybinding menu must be made separately.



' No dependencies







function new_press(b)

new_press = false

if press(b) = true and hold(b) = false then new_press = true

end function





sub update_inputs



call detect_devices



for b = 1 to keybind_count

  hold(b) = press(b)

  press(b) = false



  d = keyboard

  if dev_keyboard <> false then

      z = deviceinput(dev_keyboard)

      if button(keybind(b, d)) = true then press(b) = true

  end if



  d = gamepad

  if dev_gamepad <> false and keybind(b, d) <> false then

      z = deviceinput(dev_gamepad)



      if keybind(b, d) < 100 then ' Button

        if button(keybind(b, d)) = true then press(b) = true



      ' Stick handling:

      ' keybind() set to 101, 102 etc. is an assignment of stick 1, 2 etc. in the negative direction

      ' keybind() set to 201, 202 etc. is an assignment of stick 1, 2 etc. in the positive direction

      elseif keybind(b, d) > 200 then ' Stick positive

        if axis(keybind(b, d) - 200) >  option_sensitivity * 0.1 then press(b) = true

      else                            ' Stick negative

        if axis(keybind(b, d) - 100) < -option_sensitivity * 0.1 then press(b) = true

      end if

  end if

next b



if dev_mouse = false then exit sub



dim mb(3)

for b = 1 to 3

  mb(b) = mouse_press(b)

next b



mouse_change = false

do while mouseinput <> false and mouse_change = false

  mouse_pos_x = mousex

  mouse_pos_y = mousey

  for b = 1 to 3

      mb(b) = mousebutton(b)

      if mb(b) <> mouse_press(b) then mouse_change = true

  next b

loop



for b = 1 to 3

  mouse_hold(b) = mouse_press(b)

  mouse_press(b) = mb(b)



  if mouse_press(b) = true and mouse_hold(b) = false then

      mouse_press_x(b) = mouse_pos_x ' Store position mouse button was pressed

      mouse_press_y(b) = mouse_pos_y

  elseif mouse_press(b) = false and mouse_hold(b) = true then

      mouse_release_x(b) = mouse_pos_x ' Store position mouse button was released

      mouse_release_y(b) = mouse_pos_y

  end if

next b



end sub





sub detect_devices



dev_keyboard = false

dev_gamepad  = false

dev_mouse    = false



d = devices

for n = d to 1 step -1

  if left$(device$(n), 10) = "[KEYBOARD]"  then dev_keyboard = n

  if left$(device$(n), 12) = "[CONTROLLER]" then dev_gamepad  = n

  if left$(device$(n),  7) = "[MOUSE]"      then dev_mouse    = n

next n



end sub





sub set_press(p)

for b = 1 to keybind_count

  press(b) = p

next b

end sub





sub set_hold(p)

for b = 1 to keybind_count

  hold(b) = p

next b

end sub





sub press_any_key

do

  limit 60

  display

  for b = 1 to keybind_count

      if new_press(b) = true then exit sub

  next b

  call update_inputs

loop

end sub





sub set_default_keybinds



call detect_devices



for b = 1 to keybind_count

  keybind(b, keyboard) = keybind_default(b, keyboard)

  keybind(b, gamepad)  = keybind_default(b, gamepad)

next b



if dev_gamepad = false then exit sub



' Eliminate any defaults that go beyond a gamepad's features

d = gamepad



for b = 1 to keybind_count

  if keybind(b, d) < 100 and keybind(b, d) > lastbutton(dev_gamepad) then keybind(b, d) = false

next b



if lastaxis(dev_gamepad) < 2 then

  keybind(up_key,    d) = false

  keybind(down_key,  d) = false

  keybind(left_key,  d) = false

  keybind(right_key, d) = false

end if



end sub





sub set_key_data



key_name$(false, keyboard) = "NOT SET"

key_name$(false, gamepad)  = "NOT SET"



d = keyboard

for n = 1 to 512

  key_name$(n, d) = "UNKNOWN"

next n

key_name$(2,  d) = "ESC"

key_name$(60,  d) = "F1"

key_name$(61,  d) = "F2"

key_name$(62,  d) = "F3"

key_name$(63,  d) = "F4"

key_name$(64,  d) = "F5"

key_name$(65,  d) = "F6"

key_name$(66,  d) = "F7"

key_name$(67,  d) = "F8"

key_name$(68,  d) = "F9"

key_name$(88,  d) = "F11"

key_name$(89,  d) = "F12"

key_name$(42,  d) = "~"

key_name$(3,  d) = "1"

key_name$(4,  d) = "2"

key_name$(5,  d) = "3"

key_name$(6,  d) = "4"

key_name$(7,  d) = "5"

key_name$(8,  d) = "6"

key_name$(9,  d) = "7"

key_name$(10,  d) = "8"

key_name$(11,  d) = "9"

key_name$(12,  d) = "0"

key_name$(13,  d) = "-"

key_name$(14,  d) = "="

key_name$(15,  d) = "BKSP"

key_name$(16,  d) = "TAB"

key_name$(17,  d) = "Q"

key_name$(18,  d) = "W"

key_name$(19,  d) = "E"

key_name$(20,  d) = "R"

key_name$(21,  d) = "T"

key_name$(22,  d) = "Y"

key_name$(23,  d) = "U"

key_name$(24,  d) = "I"

key_name$(25,  d) = "O"

key_name$(26,  d) = "P"

key_name$(27,  d) = "["

key_name$(28,  d) = "]"

key_name$(44,  d) = "\"

key_name$(31,  d) = "A"

key_name$(32,  d) = "S"

key_name$(33,  d) = "D"

key_name$(34,  d) = "F"

key_name$(35,  d) = "G"

key_name$(36,  d) = "H"

key_name$(37,  d) = "J"

key_name$(38,  d) = "K"

key_name$(39,  d) = "L"

key_name$(40,  d) = ";"

key_name$(41,  d) = "'"

key_name$(29,  d) = "ENTER"

key_name$(43,  d) = "L SHIFT"

key_name$(45,  d) = "Z"

key_name$(46,  d) = "X"

key_name$(47,  d) = "C"

key_name$(48,  d) = "V"

key_name$(49,  d) = "B"

key_name$(50,  d) = "N"

key_name$(51,  d) = "M"

key_name$(52,  d) = ","

key_name$(53,  d) = "."

key_name$(54,  d) = "/"

key_name$(55,  d) = "R SHIFT"

key_name$(30,  d) = "L CTRL"

key_name$(58,  d) = "SPACE"

key_name$(286, d) = "R CTRL"

key_name$(339, d) = "INS"

key_name$(340, d) = "DEL"

key_name$(328, d) = "HOME"

key_name$(336, d) = "END"

key_name$(330, d) = "PG UP"

key_name$(338, d) = "PG DN"

key_name$(329, d) = "UP"

key_name$(337, d) = "DOWN"

key_name$(332, d) = "LEFT"

key_name$(334, d) = "RIGHT"

key_name$(310, d) = "NUM /"

key_name$(56,  d) = "NUM *"

key_name$(75,  d) = "NUM -"

key_name$(79,  d) = "NUM +"

key_name$(285, d) = "NUM ENTER"

key_name$(72,  d) = "NUM 7"

key_name$(73,  d) = "NUM 8"

key_name$(74,  d) = "NUM 9"

key_name$(76,  d) = "NUM 4"

key_name$(77,  d) = "NUM 5"

key_name$(78,  d) = "NUM 6"

key_name$(80,  d) = "NUM 1"

key_name$(81,  d) = "NUM 2"

key_name$(82,  d) = "NUM 3"

key_name$(83,  d) = "NUM 0"

key_name$(84,  d) = "NUM ."



' Troublesome keyboard codes:

'  71 - Scroll Lock

'  70 - Pause

'  59 - Caps Lock

'  348 - Windows Left

'  349 - Windows Right?

'  350 - Menu

'  326 - Num Lock



d = gamepad

for n = 1 to 20

  key_name$(n, d) = "BUTTON" + str$(n)

next n

for n = 1 to 8

  key_name$(n + 100, d) = "AXIS" + str$(n) + "-" ' *** Check that first axis is horizontal

  key_name$(n + 200, d) = "AXIS" + str$(n) + "+"

next n



end sub





sub glass_fonts(t1$, x1, y1)

' Text, font, destination image surface, position, alignment



t$ = t1$

carriage = true

if right$(t$, 1) = ";" then

  carriage = false

  t$ = left$(t$, len(t$) - 1)

end if



x = x1: y = y1

f = font_using



if font_align <> left_align then

  ' Adjust starting point based on line width, for center or right align

  w = text_width(t$, f)

  if font_align = center_align then w = int(w * 0.5)

  x = x - w

end if



for n = 1 to len(t$)

  c = asc(mid$(t$, n, 1))

  w = g_font(f, c).w

  putimage(x, y)-step(w, g_font(f, 0).h), g_font(f, 0).image, font_dest, (g_font(f, c).pos.x, g_font(f, c).pos.y)-step(w, g_font(f, 0).h)

  x = x + w + 1

next n



font_x = x1

font_y = y1

if carriage = false then font_x = x

if carriage = true  then font_y = y1 + g_font(f, 0).h



end sub





sub glass_fonts_at(t$)

glass_fonts t$, font_x, font_y

end sub





sub set_font(f, a, d&)



font_using = f

font_align = a

font_dest  = d&



end sub





sub font_pos(x, y)



font_x = x

font_y = y



end sub





sub initialize_font(f)



preserve& = source



source g_font(f, 0).image

clearcolor point(0, 0), g_font(f, 0).image

i& = g_font(f, 0).image

d~& = point(1, 0) ' Detection color



' Height

g_font(f, 0).h = scan_down(1, 2, i&, d~&) - 3



y = 0

for cy = 0 to 15

  y = scan_down(1, y, i&, d~&) + 1

  x = 1

  for cx = 0 to 15

      n = (cy * 16) + cx

      g_font(f, n).pos.x = x ' Source position

      g_font(f, n).pos.y = y

      x = scan_right(x, y, i&, d~&) + 1

      g_font(f, n).w = x - g_font(f, n).pos.x - 2 ' Variable width

  next cx

next cy



source preserve&



end sub





function font_height

font_height = g_font(font_using, 0).h

end function





function text_width(t$, f)

w = 0

for n = 1 to len(t$)

  w = w + g_font(f, asc(mid$(t$, n, 1))).w + 1

next n

text_width = w - 1

end function





function scan_right(x1, y, i&, d~&) ' Starting position (noninclusive), image, detection color

x = x1

preserve& = source

source i&

w = width(i&)

do

  x = x + 1

  if x > w then call scan_error(x, y, "right")

loop until point(x, y) = d~& or x > w

scan_right = x

source preserve&

end function





function scan_down(x, y1, i&, d~&)

y = y1

preserve& = source

source i&

h = height(i&)

do

  y = y + 1

  if y > h then call scan_error(x, y, "down")

loop until point(x, y) = d~& or y > h

scan_down = y

source preserve&

end function





sub scan_error(x, y, t$)

t1$ = "Moved " + t$ + " beyond image at" + str$(x) + "," + str$(y)

set_font f_kharon, left_align, full_screen

glass_fonts t1$, 0, 0

display: sleep

end sub





' Math and logic routines



' No data structure or dependencies





function plus_limit(n, p, l) ' p is added to n, but can't go past l in the direction of travel

q = n + p

if sgn(q - l) = sgn(p) then q = l

plus_limit = q

end function





function half(n) ' less expensive than n / 2, less parentheses than n * 0.5

half = n * 0.5

end function

function inthalf(n) ' same, but with int() around it

inthalf = int(n * 0.5)

end function





function sq(n) ' less expensive and less parentheses than n ^ 2

' For code clarity

sq = n * n

end function





function atn1(n) ' shortcut for getting radians of eight cardinals and diagonals

' For code clarity - n represents multiple of 45 degrees, or quarter-pi radians

atn1 = n * atn(1)

end function





function degrees(d) ' pass in degrees, returns radians

degrees = atn1(d / 45)

end function





function hypo(a, b) ' pass in triangle legs, returns hypotenuse (Pythagoras)

hypo = sqr(sq(a) + sq(b)) ' squares are always positive, so no danger of imaginary component

end function





function arctan(y, x) ' atn() with safety checks, and sensitive to negative axes

arctan = 0

if x = 0 and y = 0 then exit function

a = atn1(2)

if x <> 0 then ' prevent division by zero

  a = abs(atn(y / x))

  if x < 0 then a = atn1(4) - a

end if

if y < 0 then a = flip_y(a)

arctan = a

end function





function flip_x(a) ' flips angle left/right

flip_x = wrap_a( (atn1(8) - wrap_a(a + atn1(2))) - atn1(2) )

end function

function flip_y(a) ' flips angle up/down

flip_y = atn1(8) - a

end function





function frames(s) ' pass a decimal as seconds.frames, returns integer frames

f = int(s) * 60

frames = int(f + ((s - int(s)) * 100))

end function





function frames_dec(s) ' like frames(), but takes seconds.decimal instead of seconds.frames,

f = int(s) * 60        ' so 0.50 will return 30 frames, not 50 frames

frames_dec = int(f + ((s - int(s)) * 60))

end function





function wrap(n, l1, h1) ' n is adjusted back within lower(l) and upper(h) bounds similar to mod operator

l = l1: h = h1 ' make sure h is never less than l, this also prevents division by zero

if h1 < l1 then

  l = h1: h = l1

end if

x = (l - n) / ((h - l) + 1)

if x <> int(x) then x = x + 1

wrap = n + (int(x) * ((h - l) + 1))

end function





function wrap_a(a) ' angle a is adjusted back within 0 and 2pi, noninclusive of 2pi

x = -a / atn1(8)

if x <> int(x) then x = x + 1

wrap_a = a + (int(x) * atn1(8))

end function





function toggle(v, p, q)

if v = p then toggle = q

if v = q then toggle = p

end function





function rounding(n) ' rounds to closer integer

p = int(n)

if mod_dec(n, 1) => 0.5 then p = p + 1

rounding = p

end function





function min(n1, n2)

if n2 < n1 then min = n2 else min = n1

end function





function max(n1, n2)

if n2 > n1 then max = n2 else max = n1

end function





function pyr(n) ' produce pyramid number on n (1 + 2 + 3 ... n)

pyr = n * (n + 1) * 0.5

end function





function rand(n) ' produce random whole number from 1 to n

rand = int(rnd * n) + 1

end function





function mod_dec(n, d) ' mod operator that preserves decimal

mod_dec = n

if d = 0 then exit function ' Division by zero protection

mod_dec = ((n / d) - int(n / d)) * d

end function





function hexcolor~&(h$)

hexcolor~& = rgba32(0, 0, 0, 255)

if len(h$) <> 6 then exit function

hexcolor~& = rgba32(val("&H" + mid$(h$, 1, 2)), val("&H" + mid$(h$, 3, 2)), val("&H" + mid$(h$, 5, 2)), 255)

end function





function before$(t$, c$)

p = instr(t$, c$)

if p = false then p = len(t$) + 1

before$ = left$(t$, p - 1)

end function





function after$(t$, c$)

after$ = right$(t$, len(t$) - instr(t$, c$) - (len(c$) - 1))

end function





function between$(t$, c1$, c2$)

between$ = before$(after$(t$, c1$), c2$)

end function





function vector_x(a, v) ' convert polar vector to x component

vector_x = 0

if a = aim_n or a = aim_s then exit function ' Protect against undefined cos()

vector_x = v * cos(a)

end function

function vector_y(a, v) ' convert polar vector to y component

vector_y = 0

if a = aim_w or a = aim_e then exit function ' Protect against undefined sin()

vector_y = v * sin(a)

end function





function ellipse_focus_x(axis_x, axis_y)

ellipse_focus_x = 0

if axis_x > axis_y then ellipse_focus_x = sqr(sq(axis_x) - sq(axis_y))

end function

function ellipse_focus_y(axis_x, axis_y)

ellipse_focus_y = 0

if axis_x < axis_y then ellipse_focus_y = sqr(sq(axis_y) - sq(axis_x))

end function





function x_on_ellipse(ax, ay, angle)



select case angle

  case atn1(0): ex = ax

  case atn1(4): ex = ax

  case atn1(2): ex = 0

  case atn1(6): ex = 0

  case else: ex = (ax * ay) / sqr(sq(ay) + sq(ax * tan(angle)))

end select



if angle > atn1(2) and angle < atn1(6) then ex = -ex

x_on_ellipse = ex



end function





function y_on_ellipse(ax, ay, angle)



select case angle

  case atn1(0): ey = 0

  case atn1(4): ey = 0

  case atn1(2): ey = ay

  case atn1(6): ey = ay

  case else: ey = (ax * ay) / sqr(sq(ax) + sq(ay / tan(angle)))

end select



if angle > atn1(4) then ey = -ey

y_on_ellipse = ey



end function





function ellipse_tangent(ax, ay, angle)



' ax and ay are axis lengths from center of ellipse

' angle is from center of ellipse

' Returns tangent angle, facing in clockwise direction



' Point angle intersects ellipse

ix = x_on_ellipse(ax, ay, angle)

iy = y_on_ellipse(ax, ay, angle)



' Focus distance from center

fx = ellipse_focus_x(ax, ay)

fy = ellipse_focus_y(ax, ay)



' Angles from foci to intersection point

a1 = arctan(iy + fy, ix + fx)

a2 = arctan(iy - fy, ix - fx)



' Average, then right angle to get tangent angle

ellipse_tangent = wrap_a(half(a1 + a2) + atn1(2))



end function





function line_and_ellipse(x1, y1, x2, y2, axis_x, axis_y, ix, iy)



' Given a line between points (x1, y1) and (x2, y2) relative to an ellipse's center,

' find the x coordinate of the intersection between the line and the ellipse,

' closer to (x1, y1), and put output in (ix, iy).



ix = 0 ' Default to center of ellipse

iy = 0

line_and_ellipse = true ' Becomes false later if the quadratic's radical is negative



if axis_x = 0 and axis_y = 0 then exit function



fx = ellipse_focus_x(axis_x, axis_y)

fy = ellipse_focus_y(axis_x, axis_y)



dx = sgn(x2 - x1)

dy = sgn(y2 - y1)



' Handle pure vertical and horizontal

if dx = 0 or dy = 0 then

  ix = x1

  iy = y1

  if dx = 0 and dy <> 0 and axis_x > 0 then

      iy = -dy * sqr((sq(axis_y) * abs(sq(axis_x) - sq(x1))) / sq(axis_x))

  end if

  if dy = 0 and dx <> 0 and axis_y > 0 then

      ix = -dx * sqr((sq(axis_x) * abs(sq(axis_y) - sq(y1))) / sq(axis_y))

  end if



' Otherwise, run quadratic solution of line and ellipse

else

  slope = (y2 - y1) / (x2 - x1)

  elevation = y1 - (slope * x1)



  ' Quadratic coefficients

  a = sq(axis_x * slope) + sq(axis_y)

  b = 2 * sq(axis_x) * slope * elevation

  c = sq(axis_x) * (sq(elevation) - sq(axis_y))



  if sq(b) - (4 * a * c) < 0 then

      line_and_ellipse = false ' Negative will fail the quadratic radical,

      exit function            ' calling routine must be alerted

  end if



  ' Use x coordinate closer to (x1, y1)

  ix1 = quadratic(a, b, c,  1)

  ix2 = quadratic(a, b, c, -1)

  if abs(x1 - ix1) < abs(x1 - ix2) then ix = ix1 else ix = ix2



  iy = (slope * ix) + elevation

end if



end function





function quadratic(a, b, c, pm)

' pm is 1 or -1, to represent the +/- in the quadratic formula

if a = 0 then

  print "Quadratic denominator was zero!"

  display: sleep

  exit function

end if

quadratic = (-b + (pm * sqr(sq(b) - (4 * a * c)))) / (2 * a)

end function

[Pete]

So when you finished coding it, what did you do with the rest of your day?  

No, that's impressive. I looked through the code a couple of times, it certainly is a lot of work in several aspects of planning, creation and organizing.

+2

Pete

[johannhowitzer]

Heh, the practical side of this program, the calculating of mission success, that has existed for a couple years I think.  The UI was ASCII until I decided to overhaul it and see just how close I could get to the game's own graphics and menu movement feel.

Most of the time was spent trying to get accurate, complete captures of the game's assets... right down to the drop shadows, which Final Fantasy Tactics does not blend with current alpha method.  It took some testing to reveal that it just does a straight subtraction on the RGB values.  So the blending had to be done by hand. It intentionally does not have any sounds, because the idea would be to run this program while playing the game, and then you'd have two sets of sounds going on at the same time.