Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
read 2 or more USB mice on one PC - fully working with keyboard input
#1
This totally works for reading mouse input, give it a try. 
It also detects keyup / keydown events. 
Currently it just reads the one keyboard but that's good enough for most applications.
(To read keyboards with Raw Input, need to figure out how to define the RawInput type which has unions.)

Code: (Select All)
' *****************************************************************************
' NOTE: The following header files must be in same folder as this program:
' "makeint.h"
' "winproc.h"
' *****************************************************************************

' NOTE: THIS DETECTS A COUPLE "PHANTOM MICE" WHICH DON'T SEEM TO WORK
'       I THINK THESE MIGHT BE MY LAPTOP'S TOUCHPAD AND TOUCHSCREEN?
'       IS THERE SOME WAY TO IDENTIFY AND IGNORE THESE?

Option Explicit
_Title "multimouse"
$NoPrefix
$Console:Only
Console Off

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN CONSTANTS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Const FALSE = 0
Const TRUE = Not FALSE
Const cDebugEnabled = TRUE

' MIN/MAX VALUES FOR MOUSE TEST
Const cMinX = 1
Const cMaxX = 354 ' 160 ' 79
Const cMinY = 1 ' 16
Const cMaxY = 45 ' 24
Const cMinWheel = 0
Const cMaxWheel = 255
Const cMinPX = 1
Const cMaxPX = 1024
Const cMinPY = 1
Const cMaxPY = 768
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END CONSTANTS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ================================================================================================================================================================
' BEGIN API CONSTANTS
' ================================================================================================================================================================
Const COLOR_WINDOW = 5
Const CS_HREDRAW = &H0002
Const CS_VREDRAW = &H0001
Const CW_USEDEFAULT = &H80000000
Const DT_CENTER = &H00000001
Const DT_LEFT = &H00000000
Const DT_RIGHT = &H00000002
Const DT_VCENTER = &H00000004
Const DT_WORDBREAK = &H00000010
Const DT_SINGLELINE = &H00000020

Const Edit = 101
Const EM_GETSEL = &H00B0
Const EM_SETSEL = &H00B1
Const EN_CHANGE = &H0300
Const EN_KILLFOCUS = &H0200
Const EN_SETFOCUS = &H0100
Const GCL_HICON = -14
Const GCL_HICONSM = -34
Const Hid_Bottom = 66
Const Hid_Left = 33
Const Hid_Right = 34
Const HWND_DESKTOP = 0
Const ICON_BIG = 1
Const ICON_SMALL = 0
Const IDC_ARROW = 32512
Const IDI_APPLICATION = 32512
Const KEYEVENTF_KEYUP = &H0002
Const KL_NAMELENGTH = 9
Const LabelInfo = 201
Const MOUSE_ATTRIBUTES_CHANGED = &H04
Const MOUSE_MOVE_ABSOLUTE = &H01
Const MOUSE_MOVE_NOCOALESCE = &H08
Const MOUSE_MOVE_RELATIVE = &H00
Const MOUSE_VIRTUAL_DESKTOP = &H02
Const NULL = 0
Const RI_KEY_BREAK = 1
Const RI_KEY_E0 = 2
Const RI_KEY_E1 = 4
Const RI_KEY_MAKE = 0
Const RI_KEY_TERMSRV_SET_LED = 8
Const RI_KEY_TERMSRV_SHADOW = &H10
Const RID_INPUT = &H10000003
Const RIDEV_EXINPUTSINK = &H00001000
Const RIDI_DEVICEINFO = &H2000000B

Const RIM_TYPEMOUSE = 0
Const RIM_TYPEKEYBOARD = 1
Const RIM_TYPEHID = 2
Const RIM_TYPEUNKNOWN = -1 ' just a made up value to indicate type unknown

Const SIZE_MINIMIZED = 1
Const SW_SHOW = 5

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
' BEGIN Virtual-Key Codes
' https://learn.microsoft.com/en-us/windows/win32/inputdev/virtual-key-codes
' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
' NOTE: raw.data.Keyboard.vKey may require set extended bit
Const VK_LBUTTON = &H01 ' dec = 1, Left mouse button
Const VK_RBUTTON = &H02 ' dec = 2, Right mouse button
Const VK_CANCEL = &H03 ' dec = 3, Control-break processing
Const VK_MBUTTON = &H04 ' dec = 4, Middle mouse button
Const VK_XBUTTON1 = &H05 ' dec = 5, X1 mouse button
Const VK_XBUTTON2 = &H06 ' dec = 6, X2 mouse button
'??? = &H07 ' dec = 7, Reserved
Const VK_BACK = &H08 ' dec = 8, BACKSPACE key
Const VK_TAB = &H09 ' dec = 9, TAB key
'??? = &H0A-0B ' dec = 10-11, Reserved
Const VK_CLEAR = &H0C ' dec = 12, CLEAR key
Const VK_RETURN = &H0D ' dec = 13, ENTER key
'??? = &H0E-0F ' dec = 14-15, Unassigned
Const VK_SHIFT = &H10 ' dec = 16, SHIFT key
Const VK_CONTROL = &H11 ' dec = 17, CTRL key
Const VK_MENU = &H12 ' dec = 18, ALT key
Const VK_PAUSE = &H13 ' dec = 19, PAUSE key
Const VK_CAPITAL = &H14 ' dec = 20, CAPS LOCK key
Const VK_KANA = &H15 ' dec = 21, IME Kana mode
Const VK_HANGUL = &H15 ' dec = 21, IME Hangul mode
Const VK_IME_ON = &H16 ' dec = 22, IME On
Const VK_JUNJA = &H17 ' dec = 23, IME Junja mode
Const VK_FINAL = &H18 ' dec = 24, IME final mode
Const VK_HANJA = &H19 ' dec = 25, IME Hanja mode
Const VK_KANJI = &H19 ' dec = 25, IME Kanji mode
Const VK_IME_OFF = &H1A ' dec = 26, IME Off
Const VK_ESCAPE = &H1B ' dec = 27, ESC key
Const VK_CONVERT = &H1C ' dec = 28, IME convert
Const VK_NONCONVERT = &H1D ' dec = 29, IME nonconvert
Const VK_ACCEPT = &H1E ' dec = 30, IME accept
Const VK_MODECHANGE = &H1F ' dec = 31, IME mode change request
Const VK_SPACE = &H20 ' dec = 32, SPACEBAR
Const VK_PRIOR = &H21 ' dec = 33, PAGE UP key
Const VK_NEXT = &H22 ' dec = 34, PAGE DOWN key
Const VK_END = &H23 ' dec = 35, END key
Const VK_HOME = &H24 ' dec = 36, HOME key
Const VK_LEFT = &H25 ' dec = 37, LEFT ARROW key
Const VK_UP = &H26 ' dec = 38, UP ARROW key
Const VK_RIGHT = &H27 ' dec = 39, RIGHT ARROW key
Const VK_DOWN = &H28 ' dec = 40, DOWN ARROW key
Const VK_SELECT = &H29 ' dec = 41, SELECT key
Const VK_PRINT = &H2A ' dec = 42, PRINT key
Const VK_EXECUTE = &H2B ' dec = 43, EXECUTE key
Const VK_SNAPSHOT = &H2C ' dec = 44, PRINT SCREEN key
Const VK_INSERT = &H2D ' dec = 45, INS key
Const VK_DELETE = &H2E ' dec = 46, DEL key
Const VK_HELP = &H2F ' dec = 47, HELP key

' MADE OUR OWN CONSTANTS FOR THESE:
Const VK_0 = &H30 ' dec = 48, 0 key
Const VK_1 = &H31 ' dec = 49, 1 key
Const VK_2 = &H32 ' dec = 50, 2 key
Const VK_3 = &H33 ' dec = 51, 3 key
Const VK_4 = &H34 ' dec = 52, 4 key
Const VK_5 = &H35 ' dec = 53, 5 key
Const VK_6 = &H36 ' dec = 54, 6 key
Const VK_7 = &H37 ' dec = 55, 7 key
Const VK_8 = &H38 ' dec = 56, 8 key
Const VK_9 = &H39 ' dec = 57, 9 key
'??? = &H3A-40 ' dec = 58-64, Undefined
Const VK_A = &H41 ' dec = 65, A key
Const VK_B = &H42 ' dec = 66, B key
Const VK_C = &H43 ' dec = 67, C key
Const VK_D = &H44 ' dec = 68, D key
Const VK_E = &H45 ' dec = 69, E key
Const VK_F = &H46 ' dec = 70, F key
Const VK_G = &H47 ' dec = 71, G key
Const VK_H = &H48 ' dec = 72, H key
Const VK_I = &H49 ' dec = 73, I key
Const VK_J = &H4A ' dec = 74, J key
Const VK_K = &H4B ' dec = 75, K key
Const VK_L = &H4C ' dec = 76, L key
Const VK_M = &H4D ' dec = 77, M key
Const VK_N = &H4E ' dec = 78, N key
Const VK_O = &H4F ' dec = 79, O key
Const VK_P = &H50 ' dec = 80, P key
Const VK_Q = &H51 ' dec = 81, Q key
Const VK_R = &H52 ' dec = 82, R key
Const VK_S = &H53 ' dec = 83, S key
Const VK_T = &H54 ' dec = 84, T key
Const VK_U = &H55 ' dec = 85, U key
Const VK_V = &H56 ' dec = 86, V key
Const VK_W = &H57 ' dec = 87, W key
Const VK_X = &H58 ' dec = 88, X key
Const VK_Y = &H59 ' dec = 89, Y key
Const VK_Z = &H5A ' dec = 90, Z key

' Microsoft's Virtual-Key Codes constants (continued):
Const VK_LWIN = &H5B ' dec = 91, Left Windows key
Const VK_RWIN = &H5C ' dec = 92, Right Windows key
Const VK_APPS = &H5D ' dec = 93, Applications key
'??? = &H5E ' dec = 94, Reserved
Const VK_SLEEP = &H5F ' dec = 95, Computer Sleep key
Const VK_NUMPAD0 = &H60 ' dec = 96, Numeric keypad 0 key
Const VK_NUMPAD1 = &H61 ' dec = 97, Numeric keypad 1 key
Const VK_NUMPAD2 = &H62 ' dec = 98, Numeric keypad 2 key
Const VK_NUMPAD3 = &H63 ' dec = 99, Numeric keypad 3 key
Const VK_NUMPAD4 = &H64 ' dec = 100, Numeric keypad 4 key
Const VK_NUMPAD5 = &H65 ' dec = 101, Numeric keypad 5 key
Const VK_NUMPAD6 = &H66 ' dec = 102, Numeric keypad 6 key
Const VK_NUMPAD7 = &H67 ' dec = 103, Numeric keypad 7 key
Const VK_NUMPAD8 = &H68 ' dec = 104, Numeric keypad 8 key
Const VK_NUMPAD9 = &H69 ' dec = 105, Numeric keypad 9 key
Const VK_MULTIPLY = &H6A ' dec = 106, Multiply key
Const VK_ADD = &H6B ' dec = 107, Add key
Const VK_SEPARATOR = &H6C ' dec = 108, Separator key
Const VK_SUBTRACT = &H6D ' dec = 109, Subtract key
Const VK_DECIMAL = &H6E ' dec = 110, Decimal key
Const VK_DIVIDE = &H6F ' dec = 111, Divide key
Const VK_F1 = &H70 ' dec = 112, F1 key
Const VK_F2 = &H71 ' dec = 113, F2 key
Const VK_F3 = &H72 ' dec = 114, F3 key
Const VK_F4 = &H73 ' dec = 115, F4 key
Const VK_F5 = &H74 ' dec = 116, F5 key
Const VK_F6 = &H75 ' dec = 117, F6 key
Const VK_F7 = &H76 ' dec = 118, F7 key
Const VK_F8 = &H77 ' dec = 119, F8 key
Const VK_F9 = &H78 ' dec = 120, F9 key
Const VK_F10 = &H79 ' dec = 121, F10 key
Const VK_F11 = &H7A ' dec = 122, F11 key
Const VK_F12 = &H7B ' dec = 123, F12 key
Const VK_F13 = &H7C ' dec = 124, F13 key
Const VK_F14 = &H7D ' dec = 125, F14 key
Const VK_F15 = &H7E ' dec = 126, F15 key
Const VK_F16 = &H7F ' dec = 127, F16 key
Const VK_F17 = &H80 ' dec = 128, F17 key
Const VK_F18 = &H81 ' dec = 129, F18 key
Const VK_F19 = &H82 ' dec = 130, F19 key
Const VK_F20 = &H83 ' dec = 131, F20 key
Const VK_F21 = &H84 ' dec = 132, F21 key
Const VK_F22 = &H85 ' dec = 133, F22 key
Const VK_F23 = &H86 ' dec = 134, F23 key
Const VK_F24 = &H87 ' dec = 135, F24 key
'??? = &H88-8F ' dec = 136-143, Reserved
Const VK_NUMLOCK = &H90 ' dec = 144, NUM LOCK key
Const VK_SCROLL = &H91 ' dec = 145, SCROLL LOCK key
'??? = &H92-96 ' dec = 146-150, OEM specific
'??? = &H97-9F ' dec = 151-159, Unassigned
Const VK_LSHIFT = &HA0 ' dec = 160, Left SHIFT key
Const VK_RSHIFT = &HA1 ' dec = 161, Right SHIFT key
Const VK_LCONTROL = &HA2 ' dec = 162, Left CONTROL key
Const VK_RCONTROL = &HA3 ' dec = 163, Right CONTROL key
Const VK_LMENU = &HA4 ' dec = 164, Left ALT key
Const VK_RMENU = &HA5 ' dec = 165, Right ALT key
Const VK_BROWSER_BACK = &HA6 ' dec = 166, Browser Back key
Const VK_BROWSER_FORWARD = &HA7 ' dec = 167, Browser Forward key
Const VK_BROWSER_REFRESH = &HA8 ' dec = 168, Browser Refresh key
Const VK_BROWSER_STOP = &HA9 ' dec = 169, Browser Stop key
Const VK_BROWSER_SEARCH = &HAA ' dec = 170, Browser Search key
Const VK_BROWSER_FAVORITES = &HAB ' dec = 171, Browser Favorites key
Const VK_BROWSER_HOME = &HAC ' dec = 172, Browser Start and Home key
Const VK_VOLUME_MUTE = &HAD ' dec = 173, Volume Mute key
Const VK_VOLUME_DOWN = &HAE ' dec = 174, Volume Down key
Const VK_VOLUME_UP = &HAF ' dec = 175, Volume Up key
Const VK_MEDIA_NEXT_TRACK = &HB0 ' dec = 176, Next Track key
Const VK_MEDIA_PREV_TRACK = &HB1 ' dec = 177, Previous Track key
Const VK_MEDIA_STOP = &HB2 ' dec = 178, Stop Media key
Const VK_MEDIA_PLAY_PAUSE = &HB3 ' dec = 179, Play/Pause Media key
Const VK_LAUNCH_MAIL = &HB4 ' dec = 180, Start Mail key
Const VK_LAUNCH_MEDIA_SELECT = &HB5 ' dec = 181, Select Media key
Const VK_LAUNCH_APP1 = &HB6 ' dec = 182, Start Application 1 key
Const VK_LAUNCH_APP2 = &HB7 ' dec = 183, Start Application 2 key
'??? = &HB8-B9 ' dec = 184-137, Reserved
Const VK_OEM_1 = &HBA ' dec = 186, Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the ;: key
Const VK_OEM_PLUS = &HBB ' dec = 187, For any country/region, the + key
Const VK_OEM_COMMA = &HBC ' dec = 188, For any country/region, the , key
Const VK_OEM_MINUS = &HBD ' dec = 189, For any country/region, the - key
Const VK_OEM_PERIOD = &HBE ' dec = 190, For any country/region, the . key
Const VK_OEM_2 = &HBF ' dec = 191, Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the /? key
Const VK_OEM_3 = &HC0 ' dec = 192, Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the `~ key
'??? = &HC1-DA ' dec = 193-218, Reserved
Const VK_OEM_4 = &HDB ' dec = 219, Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the [{ key
Const VK_OEM_5 = &HDC ' dec = 220, Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the \\| key
Const VK_OEM_6 = &HDD ' dec = 221, Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the ]} key
Const VK_OEM_7 = &HDE ' dec = 222, Used for miscellaneous characters; it can vary by keyboard. For the US standard keyboard, the '" key
Const VK_OEM_8 = &HDF ' dec = 223, Used for miscellaneous characters; it can vary by keyboard.
'??? = &HE0 ' dec = 224, Reserved
'??? = &HE1 ' dec = 225, OEM specific
Const VK_OEM_102 = &HE2 ' dec = 226, The <> keys on the US standard keyboard, or the \\| key on the non-US 102-key keyboard
'??? = &HE3-E4 ' dec = 227-228, OEM specific
Const VK_PROCESSKEY = &HE5 ' dec = 229, IME PROCESS key
'??? = &HE6 ' dec = 230, OEM specific
Const VK_PACKET = &HE7 ' dec = 231, Used to pass Unicode characters as if they were keystrokes. The VK_PACKET key is the low word of a 32-bit Virtual Key value used for non-keyboard input methods. For more information, see Remark in KEYBDINPUT, SendInput, WM_KEYDOWN, and WM_KEYUP
'??? = &HE8 ' dec = 232, Unassigned
'??? = &HE9-F5 ' dec = 233-245, OEM specific
Const VK_ATTN = &HF6 ' dec = 246, Attn key
Const VK_CRSEL = &HF7 ' dec = 247, CrSel key
Const VK_EXSEL = &HF8 ' dec = 248, ExSel key
Const VK_EREOF = &HF9 ' dec = 249, Erase EOF key
Const VK_PLAY = &HFA ' dec = 250, Play key
Const VK_ZOOM = &HFB ' dec = 251, Zoom key
Const VK_NONAME = &HFC ' dec = 252, Reserved
Const VK_PA1 = &HFD ' dec = 253, PA1 key
Const VK_OEM_CLEAR = &HFE ' dec = 254, Clear key
' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
' END Virtual-Key Codes
' ----------------------------------------------------------------------------------------------------------------------------------------------------------------

' Messages a window receives through or sends from its WindowProc function:
' DefWindowProcA function (winuser.h)
' https://learn.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-defwindowproca
Const WM_APP = &H08000 ' dec=32768
Const WM_APPCOMMAND = &H0319 ' dec=793
Const WM_CHAR = &H0102 ' dec=258
Const WM_COMMAND = &H0111 ' dec=273
Const WM_DEADCHAR = &H0103 ' dec=259
Const WM_DESTROY = &H0002 ' dec=2
Const WM_INITDIALOG = &H0110 ' dec=272
Const WM_INPUT = &H00FF ' dec=255
Const WM_KEYDOWN = &H0100 ' dec=256
Const WM_KEYUP = &H0101 ' dec=257
Const WM_MOUSEMOVE = &H0200 ' dec=512
Const WM_NCACTIVATE = &H0086 ' dec=134
Const WM_NEXTDLGCTL = &H28 ' dec=40
Const WM_PAINT = &H000F ' dec=15
Const WM_SETICON = &H0080 ' dec=128
Const WM_SIZE = &H0005 ' dec=5
Const WM_SYSCHAR = &H0106 ' dec=262
Const WM_SYSDEADCHAR = &H0107 ' dec=263
Const WM_SYSKEYDOWN = &H0104 ' dec=260
Const WM_SYSKEYUP = &H0105 ' dec=261
Const WM_UNICHAR = &H0109 ' dec=265

' CONSTANTS USED FOR WINDOWS STYLES & FEATURES, SEE:
' Window Styles
' https://learn.microsoft.com/en-us/windows/win32/winmsg/window-styles
' Window Features
' https://learn.microsoft.com/en-us/windows/win32/winmsg/window-features
Const WS_CAPTION = &H00C00000 ' dec=12582912
Const WS_CHILD = &H40000000 ' dec=1073741824
Const WS_MAXIMIZEBOX = &H00010000 ' dec=65536
Const WS_MINIMIZEBOX = &H00020000 ' dec=131072
Const WS_OVERLAPPED = &H00000000 ' dec=0
Const WS_SYSMENU = &H00080000 ' dec=524288
Const WS_THICKFRAME = &H00040000 ' dec=262144
Const WS_VISIBLE = &H10000000 ' dec=268435456
Const WS_OVERLAPPEDWINDOW = WS_OVERLAPPED Or WS_CAPTION Or WS_SYSMENU Or WS_THICKFRAME Or WS_MINIMIZEBOX Or WS_MAXIMIZEBOX

' CONSTANTS USED BY MapVirtualKey FOR PARAMETER uMapType
' https://learn.microsoft.com/en-us/windows/win32/api/winuser/nf-winuser-mapvirtualkeya
Const MAPVK_VK_TO_VSC = 0 ' The uCode parameter is a virtual-key code and is translated into a scan code. If it is a virtual-key code that does not distinguish between left- and right-hand keys, the left-hand scan code is returned. If there is no translation, the function returns 0.
Const MAPVK_VSC_TO_VK = 1 ' The uCode parameter is a scan code and is translated into a virtual-key code that does not distinguish between left- and right-hand keys. If there is no translation, the function returns 0. Windows Vista and later: the high byte of the uCode value can contain either 0xe0 or 0xe1 to specify the extended scan code.
Const MAPVK_VK_TO_CHAR = 2 ' The uCode parameter is a virtual-key code and is translated into an unshifted character value in the low order word of the return value. Dead keys (diacritics) are indicated by setting the top bit of the return value. If there is no translation, the function returns 0. See Remarks.
Const MAPVK_VSC_TO_VK_EX = 3 ' The uCode parameter is a scan code and is translated into a virtual-key code that distinguishes between left- and right-hand keys. If there is no translation, the function returns 0. Windows Vista and later: the high byte of the uCode value can contain either 0xe0 or 0xe1 to specify the extended scan code.
Const MAPVK_VK_TO_VSC_EX = 4 ' Windows Vista and later: The uCode parameter is a virtual-key code and is translated into a scan code. If it is a virtual-key code that does not distinguish between left- and right-hand keys, the left-hand scan code is returned. If the scan code is an extended scan code, the high byte of the returned value will contain either 0xe0 or 0xe1 to specify the extended scan code. If there is no translation, the function returns 0.

' ================================================================================================================================================================
' END API CONSTANTS
' ================================================================================================================================================================

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN RAW INPUT TYPES
' FOR TYPE CONVERSION SEE: "QB64PE C Libraries" at:
' https://qb64phoenix.com/qb64wiki/index.php/C_Libraries
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RAWINPUTDEVICE structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rawinputdevice
'typedef struct tagRAWINPUTDEVICE {
'  USHORT usUsagePage;
'  USHORT usUsage;
'  DWORD  dwFlags;
'  HWND   hwndTarget;
'} RAWINPUTDEVICE, *PRAWINPUTDEVICE, *LPRAWINPUTDEVICE;

' Spriggsy's version:
Type RAWINPUTDEVICE
    As Unsigned Integer usUsagePage, usUsage
    As Unsigned Long dwFlags
    As Offset hwndTarget
End Type

' ^^^ Should "Unsigned Integer" be "_UNSIGNED INTEGER"
'     and    "Unsigned Long" be "_UNSIGNED LONG"
'     and    "Offset" be "_OFFSET" like this?:
'
'TYPE RAWINPUTDEVICE
'    usUsagePage AS _UNSIGNED INTEGER ' WORD
'    usUsage     AS _UNSIGNED INTEGER ' WORD
'    dwFlags     AS _UNSIGNED LONG ' DWORD
'    hwndTarget  AS _OFFSET ' DWORD
'END TYPE

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RAWINPUTDEVICELIST structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rawinputdevicelist
'typedef struct tagRAWINPUTDEVICELIST {
'  HANDLE hDevice;
'  DWORD  dwType;
'} RAWINPUTDEVICELIST, *PRAWINPUTDEVICELIST;

' Spriggsy's version:
Type RAWINPUTDEVICELIST
    As Offset hDevice
    As Unsigned Long dwType
    $If 64BIT Then
        As String * 4 alignment
    $End If
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'POINT structure (windef.h)
'https://learn.microsoft.com/en-us/windows/win32/api/windef/ns-windef-point
'typedef struct tagPOINT {
'  LONG x;
'  LONG y;
'} POINT, *PPOINT, *NPPOINT, *LPPOINT;

Type POINT
    As Long x, y
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'MSG structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-msg
'typedef struct tagMSG {
'  HWND   hwnd;
'  UINT   message;
'  WPARAM wParam;
'  LPARAM lParam;
'  DWORD  time;
'  POINT  pt;
'  DWORD  lPrivate;
'} MSG, *PMSG, *NPMSG, *LPMSG;

Type MSG
    As Offset hwnd
    As Unsigned Long message
    As Unsigned Offset wParam
    As Offset lParam
    As Long time
    As POINT pt
    As Long lPrivate
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'WNDCLASSEXA structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-wndclassexa
'typedef struct WNDCLASSEXA {
'  UINT      cbSize;
'  UINT      style;
'  WNDPROC   lpfnWndProc;
'  int       cbClsExtra;
'  int       cbWndExtra;
'  HINSTANCE hInstance;
'  HICON     hIcon;
'  HCURSOR   hCursor;
'  HBRUSH    hbrBackground;
'  LPCSTR    lpszMenuName;
'  LPCSTR    lpszClassName;
'  HICON     hIconSm;
'} WNDCLASSEXA, *PWNDCLASSEXA, *NPWNDCLASSEXA, *LPWNDCLASSEXA;
Type WNDCLASSEX
    As Unsigned Long cbSize, style
    As Offset lpfnWndProc
    As Long cbClsExtra, cbWndExtra
    As Offset hInstance, hIcon, hCursor, hbrBackground, lpszMenuName, lpszClassName, hIconSm
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RECT structure (windef.h)
'https://learn.microsoft.com/en-us/windows/win32/api/windef/ns-windef-rect
'typedef struct tagRECT {
'  LONG left;     Specifies the x-coordinate of the upper-left corner of the rectangle.
'  LONG top;      Specifies the y-coordinate of the upper-left corner of the rectangle.
'  LONG right;    Specifies the x-coordinate of the lower-right corner of the rectangle.
'  LONG bottom;   Specifies the y-coordinate of the lower-right corner of the rectangle.
'} RECT, *PRECT, *NPRECT, *LPRECT;
Type RECT
    As Long left, top, right, bottom
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'PAINTSTRUCT structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-paintstruct
'typedef struct tagPAINTSTRUCT {
'  HDC  hdc;
'  BOOL fErase;
'  RECT rcPaint;
'  BOOL fRestore;
'  BOOL fIncUpdate;
'  BYTE rgbReserved[32];
'} PAINTSTRUCT, *PPAINTSTRUCT, *NPPAINTSTRUCT, *LPPAINTSTRUCT;
Type PAINTSTRUCT
    As Offset hdc
    As Long fErase
    $If 64BIT Then
        As String * 4 alignment
    $End If
    As RECT rcPaint
    As Long fRestore, fIncUpdate
    As String * 32 rgbReserved
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RAWINPUTHEADER structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rawinputheader
'typedef struct tagRAWINPUTHEADER {
'  DWORD  dwType;
'  DWORD  dwSize;
'  HANDLE hDevice;
'  WPARAM wParam;
'} RAWINPUTHEADER, *PRAWINPUTHEADER, *LPRAWINPUTHEADER;

' Spriggsy's version:
Type RAWINPUTHEADER
    As Unsigned Long dwType, dwSize
    As Offset hDevice
    As Unsigned Offset wParam
End Type

' ^^^ Doesn't match the types I expected, should it be these?:
'TYPE RAWINPUTHEADER
'    dwType  AS _UNSIGNED LONG ' DWORD
'    dwSize  AS _UNSIGNED LONG ' DWORD
'    hDevice AS _UNSIGNED LONG ' DWORD <- should this be _OFFSET ?
'    wParam  AS LONG
'END TYPE

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RAWMOUSE structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rawmouse
'typedef struct tagRAWMOUSE {
'  USHORT usFlags;
'  union {
'    ULONG ulButtons;
'    struct {
'      USHORT usButtonFlags;
'      USHORT usButtonData;
'    } DUMMYSTRUCTNAME;
'  } DUMMYUNIONNAME2;
'  ULONG  ulRawButtons;
'  LONG   lLastX;
'  LONG   lLastY;
'  ULONG  ulExtraInformation;
'} RAWMOUSE, *PRAWMOUSE, *LPRAWMOUSE;

' Spriggsy's simplified version:
Type RAWMOUSE
    As Unsigned Integer usFlags
    $If 64BIT Then
        As String * 2 alignment
    $End If
    'As Unsigned Long ulButtons  'commented out because I'm creating this value using MAKELONG
    As Unsigned Integer usButtonFlags, usButtonData
    As Unsigned Long ulRawButtons
    As Long lLastX, lLastY
    As Unsigned Long ulExtraInformation
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RAWKEYBOARD structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rawkeyboard
'typedef struct tagRAWKEYBOARD {
'  USHORT MakeCode;
'  USHORT Flags;
'  USHORT Reserved;
'  USHORT VKey;
'  UINT   Message;
'  ULONG  ExtraInformation;
'} RAWKEYBOARD, *PRAWKEYBOARD, *LPRAWKEYBOARD;
Type RAWKEYBOARD
    MakeCode As _Unsigned Integer ' USHORT
    Flags As _Unsigned Integer ' USHORT
    Reserved As _Unsigned Integer ' USHORT
    VKey As _Unsigned Integer ' USHORT
    Message As _Unsigned Long ' UINT
    ExtraInformation As _Unsigned _Offset ' ULONG
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RAWINPUT structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rawinput
'typedef struct tagRAWINPUT {
'  RAWINPUTHEADER header;
'  union {
'    RAWMOUSE    mouse;
'    RAWKEYBOARD keyboard;
'    RAWHID      hid;
'  } data;
'} RAWINPUT, *PRAWINPUT, *LPRAWINPUT;

' Spriggsy's simplified version:
Type RAWINPUT
    As RAWINPUTHEADER header
    As RAWMOUSE mouse
    'As RAWKEYBOARD keyboard <- ADDING THIS CAUSES THE PROGRAM TO CRASH ON MOUSE INPUT
End Type

' Simplified copy for keyboard:
Type RAWINPUT_K
    As RAWINPUTHEADER header
    As RAWKEYBOARD keyboard
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RID_DEVICE_INFO_MOUSE structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rid_device_info_mouse
'typedef struct tagRID_DEVICE_INFO_MOUSE {
'  DWORD dwId;
'  DWORD dwNumberOfButtons;
'  DWORD dwSampleRate;
'  BOOL  fHasHorizontalWheel;
'} RID_DEVICE_INFO_MOUSE, *PRID_DEVICE_INFO_MOUSE;
Type RID_DEVICE_INFO_MOUSE
    dwId As _Unsigned Long
    dwNumberOfButtons As _Unsigned Long
    dwSampleRate As _Unsigned Long
    fHasHorizontalWheel As Integer
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RID_DEVICE_INFO_KEYBOARD structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rid_device_info_keyboard
'typedef struct tagRID_DEVICE_INFO_KEYBOARD {
'  DWORD dwType;
'  DWORD dwSubType;
'  DWORD dwKeyboardMode;
'  DWORD dwNumberOfFunctionKeys;
'  DWORD dwNumberOfIndicators;
'  DWORD dwNumberOfKeysTotal;
'} RID_DEVICE_INFO_KEYBOARD, *PRID_DEVICE_INFO_KEYBOARD;
Type RID_DEVICE_INFO_KEYBOARD
    dwType As _Unsigned Long ' DWORD
    dwSubType As _Unsigned Long ' DWORD
    dwKeyboardMode As _Unsigned Long ' DWORD
    dwNumberOfFunctionKeys As _Unsigned Long ' DWORD
    dwNumberOfIndicators As _Unsigned Long ' DWORD
    dwNumberOfKeysTotal As _Unsigned Long ' DWORD
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RID_DEVICE_INFO_HID structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rid_device_info_hid
'typedef struct tagRID_DEVICE_INFO_HID {
'  DWORD  dwVendorId;
'  DWORD  dwProductId;
'  DWORD  dwVersionNumber;
'  USHORT usUsagePage;
'  USHORT usUsage;
'} RID_DEVICE_INFO_HID, *PRID_DEVICE_INFO_HID;
Type RID_DEVICE_INFO_HID
    dwVendorId As _Unsigned Long ' DWORD
    dwProductId As _Unsigned Long ' DWORD
    dwVersionNumber As _Unsigned Long ' DWORD
    usUsagePage As _Unsigned Integer ' USHORT
    usUsage As _Unsigned Integer ' USHORT
End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
' NEEDS FIXING:

'RID_DEVICE_INFO structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rid_device_info
'typedef struct tagRID_DEVICE_INFO {
'  DWORD cbSize;
'  DWORD dwType;
'  union {
'    RID_DEVICE_INFO_MOUSE    mouse;
'    RID_DEVICE_INFO_KEYBOARD keyboard;
'    RID_DEVICE_INFO_HID      hid;
'  } DUMMYUNIONNAME1;
'} RID_DEVICE_INFO, *PRID_DEVICE_INFO, *LPRID_DEVICE_INFO;

' ^^^ NOT SURE HOW TO DEFINE THIS, SHOULD IT BE SOMETHING LIKE THIS?:

'Type DUMMYUNIONNAME1
'    My_RID_DEVICE_INFO_MOUSE As _Offset ' pointer to VAR A1
'    My_RID_DEVICE_INFO_KEYBOARD As _Offset ' pointer to VAR A2
'    My_RID_DEVICE_INFO_HID As _Offset ' pointer to VAR A3
'End Type
'Type RID_DEVICE_INFO
'    cbSize As _Unsigned Long ' DWORD
'    dwType As _Unsigned Long ' DWORD
'    My_DUMMYUNIONNAME1 As _Offset ' pointer to DUMMYUNIONNAME1
'End Type

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
'RAWHID structure (winuser.h)
'https://learn.microsoft.com/en-us/windows/win32/api/winuser/ns-winuser-rawhid
'typedef struct tagRAWHID {
'  DWORD dwSizeHid;
'  DWORD dwCount;
'  BYTE  bRawData[1];
'} RAWHID, *PRAWHID, *LPRAWHID;
Type RAWHID
    dwSizeHid As _Unsigned Long ' DWORD
    dwCount As _Unsigned Long ' DWORD
    bRawData As _Unsigned _Byte ' bRawData[1] AS BYTE
End Type

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END RAW INPUT TYPES
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN CUSTOM TYPES
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ----------------------------------------------------------------------------------------------------------------------------------------------------------------
' UDT TO HOLD THE INFO FOR EACH MOUSE (multimouse)
Type MouseInfoType
    ID As String ' player identifier or mouse device ID
   
    char As String ' cursor character
   
    x As Integer ' screen x position
    y As Integer ' screen y position
   
    dx As Integer ' mouse x movement -1=left, 1=right, 0=none
    dy As Integer ' mouse y movement -1=up  , 1=down , 0=none
   
    px As Long ' pointer x position (hires) for absolute position of mouse from raw input api
    py As Long ' pointer y position (hires) for absolute position of mouse from raw input api
   
    ' Multimouse:
    pdx As Long ' mouse x movement (hires) can be greater than just -1 or +1
    pdy As Long ' mouse y movement (hires) can be greater than just -1 or +1
   
    wheel As Integer ' mouse wheel value
   
    LeftDown As Integer ' tracks left mouse button state, TRUE=down
    MiddleDown As Integer ' tracks middle mouse button state, TRUE=down
    RightDown As Integer ' tracks right mouse button state, TRUE=down
    LeftCount As Integer ' counts left clicks
    MiddleCount As Integer ' counts middle clicks
    RightCount As Integer ' counts right clicks
End Type ' MouseInfoType

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END CUSTOM TYPES
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN API DECLARATIONS PART 1
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Declare CustomType Library
    'DECLARE FUNCTION GetRawInputDeviceList LIB "USER32.DLL" ALIAS "GetRawInputDeviceList"( _
    '    BYREF pRawInputDeviceList AS RAWINPUTDEVICELIST, _
    '    BYREF puiNumDevices AS _UNSIGNED LONG, _
    '    BYVAL cbSize AS _UNSIGNED LONG _
    '    ) AS _UNSIGNED LONG
    Function GetRawInputDeviceList~& (ByVal pRawInputDeviceList As Offset, Byval puiNumDevices As Offset, Byval cbSize As Unsigned Long)

    Sub GetRawInputDeviceList (ByVal pRawInputDeviceList As Offset, Byval puiNumDevices As Offset, Byval cbSize As Unsigned Long)

    'DECLARE FUNCTION RegisterRawInputDevices LIB "USER32.DLL" ALIAS "RegisterRawInputDevices"( _
    '    BYREF pRawInputDevices AS RAWINPUTDEVICE, _
    '    BYVAL uiNumDevices AS _UNSIGNED LONG, _
    '    BYVAL cbSize AS _UNSIGNED LONG _
    '    ) AS LONG
    Function RegisterRawInputDevices& (ByVal pRawInputDevices As Offset, Byval uiNumDevices As Unsigned Long, Byval cbSize As Unsigned Long)

    Function GetModuleHandle%& (ByVal lpModulename As Offset)
    Function LoadIcon%& (ByVal hInstance As Offset, Byval lpIconName As Offset)
    Function LoadCursor%& (ByVal hInstance As Offset, Byval lpCursorName As Offset)
    Function RegisterClassEx~% (ByVal wndclassex As Offset)
    Function CreateWindowEx%& (ByVal dwExStyle As Unsigned Long, Byval lpClassName As Offset, Byval lpWindowName As Offset, Byval dwStyle As Unsigned Long, Byval x As Long, Byval y As Long, Byval nWidth As Long, Byval nHeight As Long, Byval hWndParent As Offset, Byval hMenu As Offset, Byval hInstance As Offset, Byval lpParam As Offset)
    Sub ShowWindow (ByVal hWnd As Offset, Byval nCmdShow As Long)
    Sub UpdateWindow (ByVal hWnd As Offset)
    Function GetMessage& (ByVal lpMsg As Offset, Byval hWnd As Offset, Byval wMsgFilterMin As Unsigned Long, Byval wMsgFilterMax As Unsigned Long)
    Sub TranslateMessage (ByVal lpMsg As Offset)
    Sub DispatchMessage (ByVal lpMsg As Offset)
    Sub PostQuitMessage (ByVal nExitCode As Long)
    Function DefWindowProc%& (ByVal hWnd As Offset, Byval Msg As Unsigned Long, Byval wParam As Unsigned Offset, Byval lParam As Offset)

    'DECLARE FUNCTION GetRawInputData LIB "USER32.DLL" ALIAS "GetRawInputData"( _
    '    BYVAL hRawInput AS _UNSIGNED LONG, _
    '    BYVAL uiCommand AS _UNSIGNED LONG, _
    '    BYREF pData AS _OFFSET, _
    '    BYREF pcbSize AS _UNSIGNED LONG, _
    '    BYVAL cbSizeHeader AS _UNSIGNED LONG _
    '    ) AS _UNSIGNED LONG
    Sub GetRawInputData (ByVal hRawInput As Offset, Byval uiCommand As Unsigned Long, Byval pData As Offset, Byval pcbSize As Offset, Byval cbSizeHeader As Unsigned Long)

    Function GetRawInputData~& (ByVal hRawInput As Offset, Byval uiCommand As Unsigned Long, Byval pData As Offset, Byval pcbSize As Offset, Byval cbSizeHeader As Unsigned Long)

    Sub InvalidateRect (ByVal hWnd As Offset, Byval lpRect As Offset, Byval bErase As Long)

    'DECLARE FUNCTION SendMessage LIB "USER32.DLL" ALIAS "SendMessageA"( _
    '    BYVAL hWnd AS _OFFSET, _
    '    BYVAL Msg AS _UNSIGNED LONG, _
    '    BYVAL wParam AS _UNSIGNED LONG, _
    '    BYVAL lParam AS LONG _
    '    ) AS LONG
    Sub SendMessage (ByVal hWnd As Offset, Byval Msg As Unsigned Long, Byval wParam As Unsigned Offset, Byval lParam As Offset)

    Function BeginPaint%& (ByVal hWnd As Offset, Byval lpPaint As Offset)

    'Public Declare Function GetClientRect Lib "user32" (ByVal hwnd As Long, lpRect As RECT) As Long
    Sub GetClientRect (ByVal hWnd As Offset, Byval lpRect As Offset)

    'Public Declare Function DrawText Lib "user32" Alias "DrawTextA" (ByVal hdc As Long, ByVal lpStr As String, ByVal nCount As Long, lpRect As RECT, ByVal wFormat As Long) As Long
    Sub DrawText (ByVal hdc As Offset, Byval lpchText As Offset, Byval cchText As Long, Byval lprc As Offset, Byval format As Unsigned Long)

    'Public Declare Function OffsetRect Lib "user32" (lpRect As RECT, ByVal X As Long, ByVal Y As Long) As Long
    Sub OffsetRect (ByVal lprc As Offset, Byval dx As Long, Byval dy As Long)

    Sub EndPaint (ByVal hWnd As Offset, Byval lpPaint As Offset)


End Declare ' CustomType Library

' Header file "makeint.h" must be in same folder as this program.
Declare CustomType Library ".\makeint"
    Function MAKEINTRESOURCE%& Alias "MAKEINTRSC" (ByVal i As _Offset)
End Declare

Declare Library
    Function MAKELPARAM%& (ByVal l As Integer, Byval h As Integer)
    Function MAKELONG~& (ByVal l As Unsigned Integer, Byval h As Unsigned Integer)
End Declare

$If 64BIT Then
    Declare Library ".\internal\c\c_compiler\x86_64-w64-mingw32\include\windowsx"
    $Else
    Declare Library ".\internal\c\c_compiler\i686-w64-mingw32\include\windowsx"
    $End If
    Function GET_Y_LPARAM& (ByVal lp As Offset)
    Function GET_X_LPARAM& (ByVal lp As Offset)
End Declare

' Header file "winproc.h" must be in same folder as this program.
Declare Library ".\winproc"
    Function WindowProc%& ()
End Declare
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END API DECLARATIONS PART 1
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN GLOBAL VARIABLES
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ENABLE / DISABLE DEBUG CONSOLE
Dim Shared m_bDebug As Integer: m_bDebug = FALSE

' GLOBAL VARIABLES TO TRACK ERROR STATE
Dim Shared m_sError As String: m_sError = ""
'Dim Shared m_sIncludeError As String: m_sIncludeError = ""

' BASIC PROGRAM METADATA
Dim Shared m_ProgramPath$: m_ProgramPath$ = Left$(Command$(0), _InStrRev(Command$(0), "\"))
Dim Shared m_ProgramName$: m_ProgramName$ = Mid$(Command$(0), _InStrRev(Command$(0), "\") + 1)

' RAW INPUT VARIABLES
Dim Shared rawinputdevices As String
Dim Shared hDlg As _Unsigned Long ' DWORD

' MOUSE VARIABLES
Dim Shared arrMouse(8) As MouseInfoType ' STORES INFO FOR EACH MOUSE
Dim Shared iMouseCount As Integer ' # OF MICE ATTACHED
Dim Shared iMinX As Long
Dim Shared iMaxX As Long
Dim Shared iMinY As Long
Dim Shared iMaxY As Long

' KEYBOARD VARIABLES
'Dim Shared arrKeyIndex(8) As String ' STORES KEYBOARD ID
'Dim Shared arrLastKeyDown(8) As Integer ' STORES LAST KEY PRESSED
'Dim Shared arrLastKeyUp(8) As Integer ' STORES LAST KEY RELEASED
'Dim Shared iKeyBoardCount As Integer ' # OF KEYBOARDS ATTACHED
Dim Shared iLastKeyDown As Integer
Dim Shared iLastKeyUp As Integer

' SCREEN SIZE
Dim Shared lngScreenWidth As Long
Dim Shared lngScreenHeight As Long
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END GLOBAL VARIABLES PART 3
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' EXECUTION STARTS HERE!
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ENABLE / DISABLE DEBUG CONSOLE WINDOW
If cDebugEnabled = TRUE Then
    $Console
    _Delay 4
    _Console On
    _Echo "Started " + m_ProgramName$
    _Echo "Debugging on..."
End If

' INITIALIZE
iMinX = 0
iMaxX = _DesktopWidth '3583
iMinY = 0
iMaxY = _DesktopHeight ' 8202
lngScreenWidth = 1024 ' _DESKTOPWIDTH
lngScreenHeight = 768 ' _DESKTOPHEIGHT

' START THE EVENTS
System Val(Str$(WinMain))

' DEACTIVATE DEBUGGING WINDOW
If cDebugEnabled = TRUE Then
    _Console Off
End If

' EXIT PROGRAM
System ' return control to the operating system

'' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
'' BEGIN GLOBAL ERROR HANDLER
'' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
'ErrorHandler:
'm_sError = "Error #" + _Trim$(Str$(Err)) + " at line " + _Trim$(Str$(_ErrorLine)) + "."
'm_sIncludeError = "File " + Chr$(34) + _InclErrorFile$ + Chr$(34) + " at line " + _Trim$(Str$(_InclErrorLine)) + "."
'Resume Next
'' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
'' END GLOBAL ERROR HANDLER
'' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN DATA STATEMENTS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' MOUSE CURSORS (JUST SOME LETTERS)
CData:
Data A,b,C,D,E,f,G,H

' DEFAULT/INTIAL X COORDINATE OF EACH CURSOR ON SCREEN
XData:
Data 5,15,25,35,45,55,65,75

' DEFAULT/INTIAL Y COORDINATE OF EACH CURSOR ON SCREEN
YData:
Data 17,17,19,19,21,21,23,23

' DEFAULT/INITIAL VALUE OF EACH SCROLL WHEEL
WData:
Data 224,192,160,128,96,64,32,0

' DEFAULT/INTIAL HIRES X COORDINATE OF EACH CURSOR ON SCREEN (1024x768)
PXData:
Data 75,150,225,300,375,450,525,600

' DEFAULT/INTIAL HIRES Y COORDINATE OF EACH CURSOR ON SCREEN (1024x768)
PYData:
Data 54,108,162,216,270,324,378,432
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END DATA STATEMENTS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN RAW INPUT FUNCTIONS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' /////////////////////////////////////////////////////////////////////////////
' Runs first

Function WinMain~%& ()
    Dim As Offset hwndMain, hInst
    Dim As MSG msg
    Dim As WNDCLASSEX wndclass
    Dim As String szMainWndClass
    Dim As String szWinTitle
    Dim As Unsigned Integer reg
   
    ' SET UP WINDOW
    ' Q: HOW CAN WE GET THIS TO WORK FULLSCREEN?
    '    THIS MAKES PROGRAM CRASH: _FullScreen _SquarePixels
    hInst = GetModuleHandle(0)
    szMainWndClass = "WinTestWin" + Chr$(0)
    szWinTitle = "Hello" + Chr$(0)
    wndclass.lpszClassName = Offset(szMainWndClass)
    wndclass.cbSize = Len(wndclass)
    wndclass.style = CS_HREDRAW Or CS_VREDRAW
    wndclass.lpfnWndProc = WindowProc
    wndclass.hInstance = hInst 'GetModuleHandle(0) will return the hInstance of this EXE
    wndclass.hIcon = LoadIcon(0, MAKEINTRESOURCE(IDI_APPLICATION))
    wndclass.hIconSm = LoadIcon(0, MAKEINTRESOURCE(IDI_APPLICATION))
    wndclass.hCursor = LoadCursor(0, MAKEINTRESOURCE(IDC_ARROW))
    wndclass.hbrBackground = COLOR_WINDOW + 1
    reg = RegisterClassEx(Offset(wndclass)) 'I prefer to use the output of RegisterClassEx rather than the window name
   
    ' INITIALIZE RAW INPUT
    InitRawInput
   
    If Len(m_sError) = 0 Then
        ' SET WINDOW SiZE + INITIALIZE WINDOW
        'Q: HOW CAN WE USE THE QB64PE PROGRAM'S WINDOW HANDLE e.g. _WindowHandle ?
        hwndMain = CreateWindowEx( _
            0, _
            MAKELPARAM(reg, 0), _
            Offset(szWinTitle), _
            WS_OVERLAPPEDWINDOW, _
            0, _
            0, _
            lngScreenWidth, _
            lngScreenHeight, _
            0, _
            0, _
            hInst, _
            0)
        ShowWindow hwndMain, SW_SHOW
        UpdateWindow hwndMain
       
        InitInputVars
       
        ' MAIN PROGRAM LOOP
        While GetMessage(Offset(msg), 0, 0, 0)
            TranslateMessage Offset(msg)
            DispatchMessage Offset(msg)
        Wend
    Else
        Screen 0
        Cls
        Print "error"
        Sleep
    End If
   
    ' RETURN A VALUE
    WinMain = msg.wParam
End Function ' WinMain

' /////////////////////////////////////////////////////////////////////////////
' Handles main window events

' MESSAGE TYPES FOR READING THE KEYBOARD:
' WM_CHAR
' WM_KEYDOWN
' WM_KEYUP
' WM_SYSCHAR
' WM_SYSKEYDOWN
' WM_SYSKEYUP

Function MainWndProc%& (hwnd As Offset, nMsg As Unsigned Long, wParam As Unsigned Offset, lParam As Offset)
    ' EVENT HANDLER VARIABLES PART 1
    Static As Offset hwndButton
    Static As Long cx, cy
    Dim As Offset hdc
    Dim As PAINTSTRUCT ps
    Dim As RECT rc
    Dim As RECT TargetRect
    Dim As MEM lpb
    Dim As Unsigned Long dwSize
    Dim As RAWINPUT rawm ' MOUSE VERSION
    Dim As RAWINPUT_K rawk ' KEYBOARD VERSION
    Dim As Long tmpx, tmpy
    Static As Long maxx
    Dim As RAWINPUTHEADER rih
   
    ' TEMP VARIABLES FOR DISPLAYING FORMATTED VALUES TO SCREEN
    Dim strNextID As String
    Dim iIndex As Integer
    Dim iRowOffset As Integer
    Dim iLine As Integer
    Dim iLen As Integer
    Dim iCount As Integer
    Dim sCount As String
    Dim sText As String
    Dim sX As String
    Dim sY As String
    Dim sPX As String
    Dim sPY As String
    Dim sWheel As String
    Dim sLeftDown As String
    Dim sMiddleDown As String
    Dim sRightDown As String
    Dim sLeftCount As String
    Dim sMiddleCount As String
    Dim sRightCount As String
    Dim sNext As String
    Dim iNewX As Integer
    Dim iNewY As Integer
    Dim iDX As Integer
    Dim iDY As Integer
    Dim iInputType As Integer
   
    ' EVENT HANDLER VARIABLES PART 2
    Dim pRawInput As _Offset ' RAWINPUT POINTER
    Dim zKeyName As String ' ASCIIZ * 50 = NULL-terminated string
    Dim sRawInput As String
    Dim sBuffer As String
    Dim ScanCode As _Unsigned Long ' DWORD
    Static hFocusBak As _Unsigned Long ' DWORD
    Dim RawInputDevCount As Long
    Dim KeyboardTypeCount As Long
    Dim RawInputDeviceIndex As Long
    Dim ByteCount As Long
    Dim int_wParam As Integer
    Dim vbCrLf As String: vbCrLf = Chr$(13) + Chr$(10)
    Dim vbCr As String: vbCr = Chr$(13)
    Dim vbLf As String: vbLf = Chr$(10)
    ReDim arrText$(0)
   
    ' HANDLE EVENT MESSAGES
    Select Case nMsg
        Case WM_DESTROY:
            DebugPrint "nMsg = WM_DESTROY"
            PostQuitMessage 0
            MainWndProc = 0
            Exit Function
           
        Case WM_INPUT:
            DebugPrint "nMsg = WM_INPUT"
           
            ' MOUSE VERSION:
            GetRawInputData lParam, RID_INPUT, 0, Offset(dwSize), Len(rih)
           
            ' KEYBOARD VERSION:
            'GetRawInputData(CBLPARAM, %RID_INPUT, BYVAL %NULL, ByteCount, SIZEOF(RAWINPUTHEADER)) ' Get size of raw input buffer
           
            lpb = MemNew(dwSize)
            If lpb.SIZE = 0 Then
                MainWndProc = 0
                Exit Function
            End If
           
            ' GET THE RAW INPUT
            If GetRawInputData(lParam, RID_INPUT, lpb.OFFSET, Offset(dwSize), Len(rih)) <> dwSize Then
                Print "GetRawInputData doesn't return correct size!"
                DebugPrint "WRONG SIZE: GetRawInputData doesn't return correct size!"
            End If

            ' IDENTIFY TYPE OF INPUT
            Select Case dwSize
                Case Len(rawm):
                    ' MOUSE INPUT
                    DebugPrint "dwSize = Len(rawm) so MOUSE INPUT DETECTED"
                    iInputType = RIM_TYPEMOUSE
                    MemGet lpb, lpb.OFFSET, rawm
                Case Len(rawk):
                    ' KEYBOARD INPUT
                    DebugPrint "dwSize = Len(rawk) so KEYBOARD INPUT DETECTED"
                    iInputType = RIM_TYPEKEYBOARD
                    MemGet lpb, lpb.OFFSET, rawk
                Case Else:
                    ' SOME OTHER TYPE (MAYBE HID) BUT ONE WE CAN'T PROCESS
                    DebugPrint "dwSize = SOME OTHER TYPE (MAYBE HID)"
                    iInputType = RIM_TYPEUNKNOWN
            End Select
           
            If iInputType = RIM_TYPEMOUSE Then
                If rawm.header.dwType = RIM_TYPEMOUSE Then
                    tmpx = rawm.mouse.lLastX
                    tmpy = rawm.mouse.lLastY
                    maxx = tmpx
                   
                    ' UPDATE RANGE OF MOUSE COORDINATES
                    If GET_X_LPARAM(lParam) < iMinX Then iMinX = GET_X_LPARAM(lParam)
                    If GET_X_LPARAM(lParam) > iMaxX Then iMaxX = GET_X_LPARAM(lParam)
                    If GET_Y_LPARAM(lParam) < iMinY Then iMinY = GET_Y_LPARAM(lParam)
                    If GET_Y_LPARAM(lParam) > iMaxY Then iMaxY = GET_Y_LPARAM(lParam)
                   
                    ' IDENTIFY WHICH MOUSE IT IS
                    strNextID = _Trim$(Str$(rawm.header.hDevice))
                    DebugPrint "    strNextID = " + Chr$(34) + strNextID + Chr$(34)
                   
                    ' GET ARRAY INDEX FROM strnextID
                    iIndex = GetMouseIndex%(strNextID)
                    DebugPrint "    iIndex = " + _Trim$(Str$(iIndex))
                   
                    ' DETECT MOVEMENT
                    If iIndex >= LBound(arrMouse) Then
                        If iIndex <= UBound(arrMouse) Then
                           
                            ' METHOD #2 = INACCURATE
                            ' INCREMENT/DECREMENT FIXED DELTA
                            If rawm.mouse.lLastX < 0 Then
                                arrMouse(iIndex).dx = -1
                                arrMouse(iIndex).x = arrMouse(iIndex).x - 1
                            ElseIf rawm.mouse.lLastX > 0 Then
                                arrMouse(iIndex).dx = 1
                                arrMouse(iIndex).x = arrMouse(iIndex).x + 1
                            End If
                            If rawm.mouse.lLastY < 0 Then
                                arrMouse(iIndex).dy = -1
                                arrMouse(iIndex).y = arrMouse(iIndex).y - 1
                            ElseIf rawm.mouse.lLastY > 0 Then
                                arrMouse(iIndex).dy = 1
                                arrMouse(iIndex).y = arrMouse(iIndex).y + 1
                            End If
                           
                            ' METHOD #3: INCREMENT/DECREMENT TRUE DELTA
                            arrMouse(iIndex).pdx = rawm.mouse.lLastX
                            arrMouse(iIndex).pdy = rawm.mouse.lLastY
                            arrMouse(iIndex).px = arrMouse(iIndex).px + arrMouse(iIndex).pdx
                            arrMouse(iIndex).py = arrMouse(iIndex).py + arrMouse(iIndex).pdy
                           
                            ' =============================================================================
                            ' left button = 1 when down, 2 when released
                            If ((rawm.mouse.usButtonFlags And 1) = 1) Then
                                arrMouse(iIndex).LeftDown = TRUE
                            ElseIf ((rawm.mouse.usButtonFlags And 2) = 2) Then
                                arrMouse(iIndex).LeftDown = FALSE
                            End If

                            ' =============================================================================
                            ' middle button = 16 when down, 32 when released
                            If ((rawm.mouse.usButtonFlags And 16) = 16) Then
                                arrMouse(iIndex).MiddleDown = TRUE
                            ElseIf ((rawm.mouse.usButtonFlags And 32) = 32) Then
                                arrMouse(iIndex).MiddleDown = FALSE
                            End If

                            ' =============================================================================
                            ' right button = 4 when down, 8 when released
                            If ((rawm.mouse.usButtonFlags And 4) = 4) Then
                                arrMouse(iIndex).RightDown = TRUE
                            ElseIf ((rawm.mouse.usButtonFlags And 8) = 8) Then
                                arrMouse(iIndex).RightDown = FALSE
                            End If

                            ' =============================================================================
                            ' scroll wheel = ???
                            'Hex$(rawm.mouse.usButtonFlags)
                            'arrMouse(iIndex).wheel = ???
                        End If
                    End If

                    ' INVOKE PAINT
                    InvalidateRect hwnd, 0, -1
                    SendMessage hwnd, WM_PAINT, 0, 0
                    MainWndProc = 0
                    ' ================================================================================================================================================================
                    ' END DRAW SCREEN
                    ' ================================================================================================================================================================
                End If
            ElseIf iInputType = RIM_TYPEKEYBOARD Then
                ' *** FOR NOW RAW KEYBOARD INPUT NOT WORKING
                'DebugPrint "iInputType = RIM_TYPEKEYBOARD"
                'If rawk.header.dwType = RIM_TYPEKEYBOARD Then
                '    DebugPrint "* FOUND RAW INPUT KEYBOARD *"
                '
                '    ' HOW DO WE READ THE KEYBOARD USING RawInputAPI ???
                '    DebugPrint "rawk.header.dwType = RIM_TYPEKEYBOARD"
                '
                '    ' IDENTIFY WHICH KEYBOARD IT IS
                '    strNextID = _Trim$(Str$(rawk.header.hDevice))
                '    DebugPrint "    strNextID = " + Chr$(34) + strNextID + Chr$(34)
                '
                '    '' GET ARRAY INDEX FROM strnextID
                '    'iIndex = GetKeyboardIndex%(strNextID)
                '    'DebugPrint "    iIndex = " + _Trim$(Str$(iIndex))
                '
                'End If
            End If
           
            ' FINISHUP WM_INPUT
            MemFree lpb
            MainWndProc = 0
            Exit Function
           
        Case WM_MOUSEMOVE:
            DebugPrint "nMsg = WM_MOUSEMOVE"
            Exit Function
           
        Case WM_PAINT:
            DebugPrint "nMsg = WM_PAINT"
           
            hdc = BeginPaint(hwnd, Offset(ps))
            GetClientRect hwnd, Offset(rc)
           
            ' -----------------------------------------------------------------------------
            ' DISPLAY MOUSE INFO ON SCREEN AT MOUSE POSITIONS
            iCount = 0
            For iIndex = LBound(arrMouse) To UBound(arrMouse)
                iCount = iCount + 1
               
                If Len(arrMouse(iIndex).ID) > 0 Then
                    ' CHECK CURSOR BOUNDARIES
                    If arrMouse(iIndex).x < cMinX Then arrMouse(iIndex).x = cMinX
                    If arrMouse(iIndex).x > cMaxX Then arrMouse(iIndex).x = cMaxX
                    If arrMouse(iIndex).y < cMinY Then arrMouse(iIndex).y = cMinY
                    If arrMouse(iIndex).y > cMaxY Then arrMouse(iIndex).y = cMaxY
                   
                    ' CHECK HIRES CURSOR BOUNDARIES
                    If arrMouse(iIndex).px < cMinPX Then arrMouse(iIndex).px = cMinPX
                    If arrMouse(iIndex).px > cMaxPX Then arrMouse(iIndex).px = cMaxPX
                    If arrMouse(iIndex).py < cMinPY Then arrMouse(iIndex).py = cMinPY
                    If arrMouse(iIndex).py > cMaxPY Then arrMouse(iIndex).py = cMaxPY
                   
                    ' DEFINE TARGET RECT FOR WHERE TO DRAW ON SCREEN
                    TargetRect.left = rc.left + arrMouse(iIndex).px
                    TargetRect.top = rc.top + arrMouse(iIndex).py
                    TargetRect.right = rc.right + arrMouse(iIndex).px
                    TargetRect.bottom = rc.bottom + arrMouse(iIndex).py
                   
                    ' COLLECT VALUES FOR THIS MOUSE IN A STRING
                    sText = ""
                    sText = sText + _Trim$(Str$(iCount))
                    sText = sText + " ("
                    sText = sText + _Trim$(Str$(arrMouse(iIndex).px))
                    sText = sText + ","
                    sText = sText + _Trim$(Str$(arrMouse(iIndex).py))
                    sText = sText + ") "
                    sText = sText + IIFS$(arrMouse(iIndex).LeftDown, "1", " ")
                    sText = sText + IIFS$(arrMouse(iIndex).MiddleDown, "2", " ")
                    sText = sText + IIFS$(arrMouse(iIndex).RightDown, "3", " ")
                   
                    'arrMouse(iIndex).wheel
                    'arrMouse(iIndex).char
                    'arrMouse(iIndex).y
                    'arrMouse(iIndex).x
                   
                    ' DRAW VALUES FOR THIS MOUSE TO SCREEN AT POINTER POSITION
                    DrawText hdc, Offset(sText), Len(sText), Offset(TargetRect), DT_LEFT
                    OffsetRect Offset(TargetRect), arrMouse(iIndex).px, arrMouse(iIndex).px
                End If
            Next iIndex
           
            ' -----------------------------------------------------------------------------
            ' DISPLAY INSTRUCTIONS ON SCREEN
            ' DEFINE TARGET RECT FOR WHERE TO DRAW ON SCREEN
            TargetRect.left = rc.left + 100
            TargetRect.top = rc.top + 500
            TargetRect.right = rc.right + 100
            TargetRect.bottom = rc.bottom + 500
           
            ' COLLECT VALUES FOR THIS KEYBOARD IN A STRING
            sText = ""
            sText = sText + "Raw Input API multi-mouse demo:"
            sText = sText + Chr$(13)
            sText = sText + Chr$(13)
            sText = sText + "1. Plug in 2 or more USB mice"
            sText = sText + Chr$(13)
            sText = sText + "2. Move them around and click the buttons."
            sText = sText + Chr$(13)
            sText = sText + "3. Try pressing some keys on the keyboard."
            sText = sText + Chr$(13)
            sText = sText + Chr$(13)
            sText = sText + "Press ESC to exit."
           
            ' DRAW VALUES FOR THIS KEYBOARD TO SCREEN AT NEXT POSITION
            DrawText hdc, Offset(sText), Len(sText), Offset(TargetRect), DT_LEFT
            OffsetRect Offset(TargetRect), 0, 0 ' y,x
           
            ' -----------------------------------------------------------------------------
            ' DISPLAY KEYBOARD INFO ON SCREEN
            ' DEFINE TARGET RECT FOR WHERE TO DRAW ON SCREEN
            TargetRect.left = rc.left + 400
            TargetRect.top = rc.top + 100
            TargetRect.right = rc.right + 400
            TargetRect.bottom = rc.bottom + 100
           
            ' COLLECT VALUES FOR THIS KEYBOARD IN A STRING
            sText = ""
            sText = sText + "Keyboard: "
            sText = sText + IIFS$(iLastKeyDown > 0, VirtualKeyCodeToString$(iLastKeyDown) + " (" + _Trim$(Str$(iLastKeyDown)) + ")", "")
            'sText = sText + Chr$(13)
            'sText = sText + "  LAST DOWN="
            'sText = sText + IIFS$(iLastKeyDown > 0, VirtualKeyCodeToString$(iLastKeyDown), "")
            'sText = sText + Chr$(13)
            'sText = sText + "  LAST UP  ="
            'sText = sText + IIFS$(iLastKeyUp > 0, VirtualKeyCodeToString$(iLastKeyUp), "")
           
            ' DRAW VALUES FOR THIS KEYBOARD TO SCREEN AT NEXT POSITION
            DrawText hdc, Offset(sText), Len(sText), Offset(TargetRect), DT_LEFT
            OffsetRect Offset(TargetRect), 0, 0 ' y,x
           
            ' -----------------------------------------------------------------------------
            ' FINISH PAINT
            EndPaint hwnd, Offset(ps)

            MainWndProc = 0
            Exit Function
           
        Case WM_CHAR:
            DebugPrint "nMsg = WM_CHAR"
           
            '' GET AN INTEGER FROM WPARAM
            'If wParam < 32768 Then
            '    int_wParam = Val(_Trim$(Str$(wParam)))
            'Else
            '    int_wParam = -1
            'End If
            '
            '' WM_CHAR message
            '' https://learn.microsoft.com/en-us/windows/win32/inputdev/wm-char
            '' Posted to the window with the keyboard focus when a WM_KEYDOWN message is translated by the TranslateMessage function. The WM_CHAR message contains the character code of the key that was pressed.
            'DebugPrint "nMsg = WM_CHAR"
            'DebugPrint "    Offset hwnd=" + _Trim$(Str$(hwnd)) + ", Unsigned Long nMsg=" + _Trim$(Str$(nMsg)) + ", Unsigned Offset wParam=" + _Trim$(Str$(wParam)) + ", Offset lParam=" + _Trim$(Str$(lParam))
            'DebugPrint "    Pressed key: " + VirtualKeyCodeToString$(int_wParam)
            '
            '' INVOKE PAINT
            'InvalidateRect hwnd, 0, -1
            'SendMessage hwnd, WM_PAINT, 0, 0
            'MainWndProc = 0
           
            Exit Function
           
        Case WM_KEYDOWN:
            DebugPrint "nMsg = WM_KEYDOWN"
           
            ' GET AN INTEGER FROM WPARAM
            If wParam < 32768 Then
                int_wParam = Val(_Trim$(Str$(wParam)))
            Else
                int_wParam = -1
            End If
           
            ' REMEMBER KEY
            iLastKeyDown = int_wParam
           
            ' WM_KEYDOWN message
            ' Posted to the window with the keyboard focus when a nonsystem key is pressed. A nonsystem key is a key that is pressed when the ALT key is not pressed.
            ' https://learn.microsoft.com/en-us/windows/win32/inputdev/wm-keydown
            DebugPrint "nMsg = WM_KEYDOWN"
            DebugPrint "    strNextID  =" + Chr$(34) + strNextID + Chr$(34)
            DebugPrint "    Offset hwnd=" + _Trim$(Str$(hwnd)) + ", Unsigned Long nMsg=" + _Trim$(Str$(nMsg)) + ", Unsigned Offset wParam=" + _Trim$(Str$(wParam)) + ", Offset lParam=" + _Trim$(Str$(lParam))
            DebugPrint "    Pressed key: " + VirtualKeyCodeToString$(int_wParam)
           
            ' INVOKE PAINT
            InvalidateRect hwnd, 0, -1
            SendMessage hwnd, WM_PAINT, 0, 0
            MainWndProc = 0
           
            Exit Function
           
        Case WM_KEYUP:
            DebugPrint "nMsg = WM_KEYUP"
           
            ' GET AN INTEGER FROM WPARAM
            If wParam < 32768 Then
                int_wParam = Val(_Trim$(Str$(wParam)))
            Else
                int_wParam = -1
            End If
           
            ' REMEMBER KEY
            iLastKeyUp = int_wParam
            iLastKeyDown = 0
           
            ' WM_KEYUP message
            ' https://learn.microsoft.com/en-us/windows/win32/inputdev/wm-keyup
            ' Posted to the window with the keyboard focus when a nonsystem key is released. A nonsystem key is a key that is pressed when the ALT key is not pressed, or a keyboard key that is pressed when a window has the keyboard focus.
            DebugPrint "nMsg = WM_KEYUP"
            DebugPrint "    strNextID  =" + Chr$(34) + strNextID + Chr$(34)
            DebugPrint "    Offset hwnd=" + _Trim$(Str$(hwnd)) + ", Unsigned Long nMsg=" + _Trim$(Str$(nMsg)) + ", Unsigned Offset wParam=" + _Trim$(Str$(wParam)) + ", Offset lParam=" + _Trim$(Str$(lParam))
            DebugPrint "    Pressed key: " + VirtualKeyCodeToString$(int_wParam)
           
            ' INVOKE PAINT
            InvalidateRect hwnd, 0, -1
            SendMessage hwnd, WM_PAINT, 0, 0
            MainWndProc = 0
           
            ' EXIT WHEN USER RELEASES ESCAPE KEY
            If int_wParam = 27 Then System
           
            Exit Function
           
        Case WM_SYSCHAR:
            DebugPrint "nMsg = WM_SYSCHAR"
           
            '' GET AN INTEGER FROM WPARAM
            'If wParam < 32768 Then
            '    int_wParam = Val(_Trim$(Str$(wParam)))
            'Else
            '    int_wParam = -1
            'End If
            '
            '' WM_SYSCHAR message
            '' https://learn.microsoft.com/en-us/windows/win32/menurc/wm-syschar
            '' Posted to the window with the keyboard focus when a WM_SYSKEYDOWN message is translated by the TranslateMessage function. It specifies the character code of a system character key that is, a character key that is pressed while the ALT key is down.
            'DebugPrint "nMsg = WM_SYSCHAR"
            'DebugPrint "    Offset hwnd=" + _Trim$(Str$(hwnd)) + ", Unsigned Long nMsg=" + _Trim$(Str$(nMsg)) + ", Unsigned Offset wParam=" + _Trim$(Str$(wParam)) + ", Offset lParam=" + _Trim$(Str$(lParam))
            'DebugPrint "    Pressed key: " + VirtualKeyCodeToString$(int_wParam)
            '
            '' INVOKE PAINT
            'InvalidateRect hwnd, 0, -1
            'SendMessage hwnd, WM_PAINT, 0, 0
            'MainWndProc = 0
           
            Exit Function
           
        Case WM_SYSKEYDOWN:
            DebugPrint "nMsg = WM_SYSKEYDOWN"
           
            ' GET AN INTEGER FROM WPARAM
            If wParam < 32768 Then
                int_wParam = Val(_Trim$(Str$(wParam)))
            Else
                int_wParam = -1
            End If
           
            ' REMEMBER KEY
            iLastKeyDown = int_wParam
           
            ' WM_SYSKEYDOWN message
            ' https://learn.microsoft.com/en-us/windows/win32/inputdev/wm-syskeydown
            ' Posted to the window with the keyboard focus when the user presses the F10 key (which activates the menu bar) or holds down the ALT key and then presses another key. It also occurs when no window currently has the keyboard focus; in this case, the WM_SYSKEYDOWN message is sent to the active window. The window that receives the message can distinguish between these two contexts by checking the context code in the lParam parameter.
            DebugPrint "nMsg = WM_SYSKEYDOWN"
            DebugPrint "    strNextID  =" + Chr$(34) + strNextID + Chr$(34)
            DebugPrint "    Offset hwnd=" + _Trim$(Str$(hwnd)) + ", Unsigned Long nMsg=" + _Trim$(Str$(nMsg)) + ", Unsigned Offset wParam=" + _Trim$(Str$(wParam)) + ", Offset lParam=" + _Trim$(Str$(lParam))
            DebugPrint "    Pressed key: " + VirtualKeyCodeToString$(int_wParam)
           
            ' INVOKE PAINT
            InvalidateRect hwnd, 0, -1
            SendMessage hwnd, WM_PAINT, 0, 0
            MainWndProc = 0
           
            Exit Function
           
        Case WM_SYSKEYUP:
            DebugPrint "nMsg = WM_SYSKEYUP"
           
            ' GET AN INTEGER FROM WPARAM
            If wParam < 32768 Then
                int_wParam = Val(_Trim$(Str$(wParam)))
            Else
                int_wParam = -1
            End If
           
            ' REMEMBER KEY
            iLastKeyUp = int_wParam
            iLastKeyDown = 0
           
            ' WM_SYSKEYUP message
            ' https://learn.microsoft.com/en-us/windows/win32/inputdev/wm-syskeyup
            ' Posted to the window with the keyboard focus when the user releases a key that was pressed while the ALT key was held down. It also occurs when no window currently has the keyboard focus; in this case, the WM_SYSKEYUP message is sent to the active window. The window that receives the message can distinguish between these two contexts by checking the context code in the lParam parameter.
            ' A window receives this message through its WindowProc function.
            DebugPrint "nMsg = WM_SYSKEYUP"
            DebugPrint "    strNextID  =" + Chr$(34) + strNextID + Chr$(34)
            DebugPrint "    Offset hwnd=" + _Trim$(Str$(hwnd)) + ", Unsigned Long nMsg=" + _Trim$(Str$(nMsg)) + ", Unsigned Offset wParam=" + _Trim$(Str$(wParam)) + ", Offset lParam=" + _Trim$(Str$(lParam))
            DebugPrint "    Pressed key: " + VirtualKeyCodeToString$(int_wParam)
           
            ' INVOKE PAINT
            InvalidateRect hwnd, 0, -1
            SendMessage hwnd, WM_PAINT, 0, 0
            MainWndProc = 0
           
            Exit Function
           
        Case Else:
            ' some other message
            MainWndProc = DefWindowProc(hwnd, nMsg, wParam, lParam)
    End Select
End Function ' MainWndProc

' /////////////////////////////////////////////////////////////////////////////
' Initializes raw input stuff

Sub InitRawInput ()
    Dim As RAWINPUTDEVICE Rid(0 To 49)
    Dim As Unsigned Long nDevices
    Dim As RAWINPUTDEVICELIST RawInputDeviceList
    Dim As MEM pRawInputDeviceList
    ReDim As RAWINPUTDEVICELIST rawdevs(-1)
    Dim As Unsigned Long x
    Dim iLoop2 As Integer
    Dim strNextID As String
   
    If GetRawInputDeviceList(0, Offset(nDevices), Len(RawInputDeviceList)) <> 0 Then
        Exit Sub
    End If
   
    pRawInputDeviceList = MemNew(Len(RawInputDeviceList) * nDevices)
    GetRawInputDeviceList pRawInputDeviceList.OFFSET, Offset(nDevices), Len(RawInputDeviceList)
   
    ' This small block of commented code proves that we've got the device list
    ReDim As RAWINPUTDEVICELIST rawdevs(0 To nDevices - 1)
    MemGet pRawInputDeviceList, pRawInputDeviceList.OFFSET, rawdevs()
   
    ' GET DEVICE INFO
    iMouseCount = 0
    'iKeyBoardCount = 0
   
    rawinputdevices = "Number of raw input devices:" + Str$(nDevices) + Chr$(13)
   
    For x = 0 To UBound(rawdevs)
        rawinputdevices = rawinputdevices + Str$(rawdevs(x).hDevice) + ":" + Str$(rawdevs(x).dwType) + Chr$(13)

        ' Is it a mouse or Keyboard?
        If rawdevs(x).dwType = RIM_TYPEMOUSE Then
            iMouseCount = iMouseCount + 1 ' INCREMENT THE MOUSE COUNT
            strNextID = _Trim$(Str$(rawdevs(x).hDevice)) ' GET THE MOUSE DEVICE ID
            arrMouse(iMouseCount - 1).ID = strNextID ' SAVE THE MOUSE DEVICE ID
        ElseIf rawdevs(x).dwType = RIM_TYPEKEYBOARD Then
            'iKeyBoardCount = iKeyBoardCount + 1 ' INCREMENT THE KEYBAORD COUNT
            'strNextID = _Trim$(Str$(rawdevs(x).hDevice)) ' GET THE KEYBOARD DEVICE ID
            'arrKeyIndex(iKeyBoardCount - 1) = strNextID ' SAVE THE KEYBOARD DEVICE ID
            'arrLastKeyDown(iKeyBoardCount - 1) = 0
        End If
    Next x
   
    ' FOR NOW KEYBOARD INFO IS NOT RAW INPUT, UNTIL WE FIGURE IT OUT:
    iLastKeyDown = 0
    iLastKeyUp = 0
   
    rawinputdevices = rawinputdevices + Chr$(0)
    MemFree pRawInputDeviceList
   
    Rid(0).usUsagePage = &H01
    Rid(0).usUsage = &H02
    Rid(0).dwFlags = 0
    Rid(0).hwndTarget = 0
   
    If RegisterRawInputDevices(Offset(Rid()), 1, Len(Rid(0))) = 0 Then
        m_sError = "RawInput init failed" + Chr$(0)
    End If
End Sub ' InitRawInput

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END RAW INPUT FUNCTIONS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN RAW INPUT VARIABLE FUNCTIONS #1
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' /////////////////////////////////////////////////////////////////////////////
' Initialize variables that store mouse + keyboard input

Sub InitInputVars
    Dim iIndex As Integer
    Dim iLoop As Integer
   
    ' FOR NOW ONLY SUPPORT UPTO 8 MICE
    If (iMouseCount > 8) Then iMouseCount = 8
   
    ' INITIALIZE CURSORS, MOUSE STATE, ETC.
    Restore CData
    iIndex = LBound(arrMouse) - 1
    For iLoop = 1 To iMouseCount
        iIndex = iIndex + 1
        Read arrMouse(iIndex).char
       
        arrMouse(iIndex).dx = 0
        arrMouse(iIndex).dy = 0
        arrMouse(iIndex).pdx = 100
        arrMouse(iIndex).pdy = 100
       
        arrMouse(iIndex).LeftDown = FALSE
        arrMouse(iIndex).MiddleDown = FALSE
        arrMouse(iIndex).RightDown = FALSE
        arrMouse(iIndex).LeftCount = 0
        arrMouse(iIndex).MiddleCount = 0
        arrMouse(iIndex).RightCount = 0
    Next iLoop
   
    ' INITIALIZE X COORDINATES
    Restore XData
    iIndex = LBound(arrMouse) - 1
    For iLoop = 1 To iMouseCount
        iIndex = iIndex + 1
        Read arrMouse(iIndex).x
    Next iLoop
   
    ' INITIALIZE Y COORDINATES
    Restore YData
    iIndex = LBound(arrMouse) - 1
    For iLoop = 1 To iMouseCount
        iIndex = iIndex + 1
        Read arrMouse(iIndex).y
    Next iLoop
   
    ' INITIALIZE HIRES X COORDINATES
    Restore PXData
    iIndex = LBound(arrMouse) - 1
    For iLoop = 1 To iMouseCount
        iIndex = iIndex + 1
        Read arrMouse(iIndex).px
    Next iLoop
   
    ' INITIALIZE HIRES Y COORDINATES
    Restore PYData
    iIndex = LBound(arrMouse) - 1
    For iLoop = 1 To iMouseCount
        iIndex = iIndex + 1
        Read arrMouse(iIndex).py
    Next iLoop
   
    ' INITIALIZE SCROLL WHEEL
    Restore WData
    iIndex = LBound(arrMouse) - 1
    For iLoop = 1 To iMouseCount
        iIndex = iIndex + 1
        Read arrMouse(iIndex).wheel
    Next iLoop
   
    ' INITIALIZE KEYBOARD STATE VARIABLES
    'iKeyBoardCount = 0 ' # OF KEYBOARDS ATTACHED
    'For iIndex = lbound(arrKeyIndex) to ubound(arrKeyIndex)
    '   arrKeyIndex(iIndex) = "" ' STORES KEYBOARD ID
    '   arrLastKeyDown(iIndex) = 0 ' STORES LAST KEY PRESSED FOR THIS KEYBOARD
    'next iIndex
    iLastKeyDown = 0
    iLastKeyUp = 0
End Sub ' InitInputVars

' /////////////////////////////////////////////////////////////////////////////
' Finds position in array arrMouse where .ID = MouseID

Function GetMouseIndex% (MouseID As String)
    Dim iLoop As Integer
    Dim iIndex%
    iIndex% = LBound(arrMouse) - 1
    For iLoop = LBound(arrMouse) To UBound(arrMouse)
        If arrMouse(iLoop).ID = MouseID Then
            iIndex% = iLoop
            Exit For
        End If
    Next iLoop
    GetMouseIndex% = iIndex%
End Function ' GetMouseIndex%

'' /////////////////////////////////////////////////////////////////////////////
'' Finds position in array arrKeyIndex containing KeyboardID
'
'Function GetKeyboardIndex% (KeyboardID As String)
'    Dim iLoop As Integer
'    Dim iIndex%
'    iIndex% = LBound(arrKeyIndex) - 1
'    For iLoop = LBound(arrKeyIndex) To UBound(arrKeyIndex)
'        If arrKeyIndex(iLoop) = KeyboardID Then
'            iIndex% = iLoop
'            Exit For
'        End If
'    Next iLoop
'    GetKeyboardIndex% = iIndex%
'End Function ' GetKeyboardIndex%

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END RAW INPUT VARIABLE FUNCTIONS #1
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN CONSTANT TO STRING FUNCTIONS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' /////////////////////////////////////////////////////////////////////////////

Function VirtualKeyCodeToString$ (MyInteger As Integer)
    Dim Mystring As String
   
    Select Case MyInteger
        Case VK_LBUTTON:
            Mystring = "VK_LBUTTON"
        Case VK_RBUTTON:
            Mystring = "VK_RBUTTON"
        Case VK_CANCEL:
            Mystring = "VK_CANCEL"
        Case VK_MBUTTON:
            Mystring = "VK_MBUTTON"
        Case VK_XBUTTON1:
            Mystring = "VK_XBUTTON1"
        Case VK_XBUTTON2:
            Mystring = "VK_XBUTTON2"
        Case VK_BACK:
            Mystring = "VK_BACK"
        Case VK_TAB:
            Mystring = "VK_TAB"
        Case VK_CLEAR:
            Mystring = "VK_CLEAR"
        Case VK_RETURN:
            Mystring = "VK_RETURN"
        Case VK_SHIFT:
            Mystring = "VK_SHIFT"
        Case VK_CONTROL:
            Mystring = "VK_CONTROL"
        Case VK_MENU:
            Mystring = "VK_MENU"
        Case VK_PAUSE:
            Mystring = "VK_PAUSE"
        Case VK_CAPITAL:
            Mystring = "VK_CAPITAL"
        Case VK_KANA:
            Mystring = "VK_KANA"
        Case VK_HANGUL:
            Mystring = "VK_HANGUL"
        Case VK_IME_ON:
            Mystring = "VK_IME_ON"
        Case VK_JUNJA:
            Mystring = "VK_JUNJA"
        Case VK_FINAL:
            Mystring = "VK_FINAL"
        Case VK_HANJA:
            Mystring = "VK_HANJA"
        Case VK_KANJI:
            Mystring = "VK_KANJI"
        Case VK_IME_OFF:
            Mystring = "VK_IME_OFF"
        Case VK_ESCAPE:
            Mystring = "VK_ESCAPE"
        Case VK_CONVERT:
            Mystring = "VK_CONVERT"
        Case VK_NONCONVERT:
            Mystring = "VK_NONCONVERT"
        Case VK_ACCEPT:
            Mystring = "VK_ACCEPT"
        Case VK_MODECHANGE:
            Mystring = "VK_MODECHANGE"
        Case VK_SPACE:
            Mystring = "VK_SPACE"
        Case VK_PRIOR:
            Mystring = "VK_PRIOR"
        Case VK_NEXT:
            Mystring = "VK_NEXT"
        Case VK_END:
            Mystring = "VK_END"
        Case VK_HOME:
            Mystring = "VK_HOME"
        Case VK_LEFT:
            Mystring = "VK_LEFT"
        Case VK_UP:
            Mystring = "VK_UP"
        Case VK_RIGHT:
            Mystring = "VK_RIGHT"
        Case VK_DOWN:
            Mystring = "VK_DOWN"
        Case VK_SELECT:
            Mystring = "VK_SELECT"
        Case VK_PRINT:
            Mystring = "VK_PRINT"
        Case VK_EXECUTE:
            Mystring = "VK_EXECUTE"
        Case VK_SNAPSHOT:
            Mystring = "VK_SNAPSHOT"
        Case VK_INSERT:
            Mystring = "VK_INSERT"
        Case VK_DELETE:
            Mystring = "VK_DELETE"
        Case VK_HELP:
            Mystring = "VK_HELP"
        Case VK_0:
            Mystring = "VK_0"
        Case VK_1:
            Mystring = "VK_1"
        Case VK_2:
            Mystring = "VK_2"
        Case VK_3:
            Mystring = "VK_3"
        Case VK_4:
            Mystring = "VK_4"
        Case VK_5:
            Mystring = "VK_5"
        Case VK_6:
            Mystring = "VK_6"
        Case VK_7:
            Mystring = "VK_7"
        Case VK_8:
            Mystring = "VK_8"
        Case VK_9:
            Mystring = "VK_9"
        Case VK_A:
            Mystring = "VK_A"
        Case VK_B:
            Mystring = "VK_B"
        Case VK_C:
            Mystring = "VK_C"
        Case VK_D:
            Mystring = "VK_D"
        Case VK_E:
            Mystring = "VK_E"
        Case VK_F:
            Mystring = "VK_F"
        Case VK_G:
            Mystring = "VK_G"
        Case VK_H:
            Mystring = "VK_H"
        Case VK_I:
            Mystring = "VK_I"
        Case VK_J:
            Mystring = "VK_J"
        Case VK_K:
            Mystring = "VK_K"
        Case VK_L:
            Mystring = "VK_L"
        Case VK_M:
            Mystring = "VK_M"
        Case VK_N:
            Mystring = "VK_N"
        Case VK_O:
            Mystring = "VK_O"
        Case VK_P:
            Mystring = "VK_P"
        Case VK_Q:
            Mystring = "VK_Q"
        Case VK_R:
            Mystring = "VK_R"
        Case VK_S:
            Mystring = "VK_S"
        Case VK_T:
            Mystring = "VK_T"
        Case VK_U:
            Mystring = "VK_U"
        Case VK_V:
            Mystring = "VK_V"
        Case VK_W:
            Mystring = "VK_W"
        Case VK_X:
            Mystring = "VK_X"
        Case VK_Y:
            Mystring = "VK_Y"
        Case VK_Z:
            Mystring = "VK_Z"
        Case VK_LWIN:
            Mystring = "VK_LWIN"
        Case VK_RWIN:
            Mystring = "VK_RWIN"
        Case VK_APPS:
            Mystring = "VK_APPS"
        Case VK_SLEEP:
            Mystring = "VK_SLEEP"
        Case VK_NUMPAD0:
            Mystring = "VK_NUMPAD0"
        Case VK_NUMPAD1:
            Mystring = "VK_NUMPAD1"
        Case VK_NUMPAD2:
            Mystring = "VK_NUMPAD2"
        Case VK_NUMPAD3:
            Mystring = "VK_NUMPAD3"
        Case VK_NUMPAD4:
            Mystring = "VK_NUMPAD4"
        Case VK_NUMPAD5:
            Mystring = "VK_NUMPAD5"
        Case VK_NUMPAD6:
            Mystring = "VK_NUMPAD6"
        Case VK_NUMPAD7:
            Mystring = "VK_NUMPAD7"
        Case VK_NUMPAD8:
            Mystring = "VK_NUMPAD8"
        Case VK_NUMPAD9:
            Mystring = "VK_NUMPAD9"
        Case VK_MULTIPLY:
            Mystring = "VK_MULTIPLY"
        Case VK_ADD:
            Mystring = "VK_ADD"
        Case VK_SEPARATOR:
            Mystring = "VK_SEPARATOR"
        Case VK_SUBTRACT:
            Mystring = "VK_SUBTRACT"
        Case VK_DECIMAL:
            Mystring = "VK_DECIMAL"
        Case VK_DIVIDE:
            Mystring = "VK_DIVIDE"
        Case VK_F1:
            Mystring = "VK_F1"
        Case VK_F2:
            Mystring = "VK_F2"
        Case VK_F3:
            Mystring = "VK_F3"
        Case VK_F4:
            Mystring = "VK_F4"
        Case VK_F5:
            Mystring = "VK_F5"
        Case VK_F6:
            Mystring = "VK_F6"
        Case VK_F7:
            Mystring = "VK_F7"
        Case VK_F8:
            Mystring = "VK_F8"
        Case VK_F9:
            Mystring = "VK_F9"
        Case VK_F10:
            Mystring = "VK_F10"
        Case VK_F11:
            Mystring = "VK_F11"
        Case VK_F12:
            Mystring = "VK_F12"
        Case VK_F13:
            Mystring = "VK_F13"
        Case VK_F14:
            Mystring = "VK_F14"
        Case VK_F15:
            Mystring = "VK_F15"
        Case VK_F16:
            Mystring = "VK_F16"
        Case VK_F17:
            Mystring = "VK_F17"
        Case VK_F18:
            Mystring = "VK_F18"
        Case VK_F19:
            Mystring = "VK_F19"
        Case VK_F20:
            Mystring = "VK_F20"
        Case VK_F21:
            Mystring = "VK_F21"
        Case VK_F22:
            Mystring = "VK_F22"
        Case VK_F23:
            Mystring = "VK_F23"
        Case VK_F24:
            Mystring = "VK_F24"
        Case VK_NUMLOCK:
            Mystring = "VK_NUMLOCK"
        Case VK_SCROLL:
            Mystring = "VK_SCROLL"
        Case VK_LSHIFT:
            Mystring = "VK_LSHIFT"
        Case VK_RSHIFT:
            Mystring = "VK_RSHIFT"
        Case VK_LCONTROL:
            Mystring = "VK_LCONTROL"
        Case VK_RCONTROL:
            Mystring = "VK_RCONTROL"
        Case VK_LMENU:
            Mystring = "VK_LMENU"
        Case VK_RMENU:
            Mystring = "VK_RMENU"
        Case VK_BROWSER_BACK:
            Mystring = "VK_BROWSER_BACK"
        Case VK_BROWSER_FORWARD:
            Mystring = "VK_BROWSER_FORWARD"
        Case VK_BROWSER_REFRESH:
            Mystring = "VK_BROWSER_REFRESH"
        Case VK_BROWSER_STOP:
            Mystring = "VK_BROWSER_STOP"
        Case VK_BROWSER_SEARCH:
            Mystring = "VK_BROWSER_SEARCH"
        Case VK_BROWSER_FAVORITES:
            Mystring = "VK_BROWSER_FAVORITES"
        Case VK_BROWSER_HOME:
            Mystring = "VK_BROWSER_HOME"
        Case VK_VOLUME_MUTE:
            Mystring = "VK_VOLUME_MUTE"
        Case VK_VOLUME_DOWN:
            Mystring = "VK_VOLUME_DOWN"
        Case VK_VOLUME_UP:
            Mystring = "VK_VOLUME_UP"
        Case VK_MEDIA_NEXT_TRACK:
            Mystring = "VK_MEDIA_NEXT_TRACK"
        Case VK_MEDIA_PREV_TRACK:
            Mystring = "VK_MEDIA_PREV_TRACK"
        Case VK_MEDIA_STOP:
            Mystring = "VK_MEDIA_STOP"
        Case VK_MEDIA_PLAY_PAUSE:
            Mystring = "VK_MEDIA_PLAY_PAUSE"
        Case VK_LAUNCH_MAIL:
            Mystring = "VK_LAUNCH_MAIL"
        Case VK_LAUNCH_MEDIA_SELECT:
            Mystring = "VK_LAUNCH_MEDIA_SELECT"
        Case VK_LAUNCH_APP1:
            Mystring = "VK_LAUNCH_APP1"
        Case VK_LAUNCH_APP2:
            Mystring = "VK_LAUNCH_APP2"
        Case VK_OEM_1:
            Mystring = "VK_OEM_1"
        Case VK_OEM_PLUS:
            Mystring = "VK_OEM_PLUS"
        Case VK_OEM_COMMA:
            Mystring = "VK_OEM_COMMA"
        Case VK_OEM_MINUS:
            Mystring = "VK_OEM_MINUS"
        Case VK_OEM_PERIOD:
            Mystring = "VK_OEM_PERIOD"
        Case VK_OEM_2:
            Mystring = "VK_OEM_2"
        Case VK_OEM_3:
            Mystring = "VK_OEM_3"
        Case VK_OEM_4:
            Mystring = "VK_OEM_4"
        Case VK_OEM_5:
            Mystring = "VK_OEM_5"
        Case VK_OEM_6:
            Mystring = "VK_OEM_6"
        Case VK_OEM_7:
            Mystring = "VK_OEM_7"
        Case VK_OEM_8:
            Mystring = "VK_OEM_8"
        Case VK_OEM_102:
            Mystring = "VK_OEM_102"
        Case VK_PROCESSKEY:
            Mystring = "VK_PROCESSKEY"
        Case VK_PACKET:
            Mystring = "VK_PACKET"
        Case VK_ATTN:
            Mystring = "VK_ATTN"
        Case VK_CRSEL:
            Mystring = "VK_CRSEL"
        Case VK_EXSEL:
            Mystring = "VK_EXSEL"
        Case VK_EREOF:
            Mystring = "VK_EREOF"
        Case VK_PLAY:
            Mystring = "VK_PLAY"
        Case VK_ZOOM:
            Mystring = "VK_ZOOM"
        Case VK_NONAME:
            Mystring = "VK_NONAME"
        Case VK_PA1:
            Mystring = "VK_PA1"
        Case VK_OEM_CLEAR:
            Mystring = "VK_OEM_CLEAR"
        Case Else:
            Mystring = _Trim$(Str$(MyInteger))
    End Select
    VirtualKeyCodeToString$ = Mystring
End Function ' VirtualKeyCodeToString$

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END CONSTANT TO STRING FUNCTIONS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN GENERAL PURPOSE FUNCTIONS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' /////////////////////////////////////////////////////////////////////////////
' IIF function for QB for integers

Function IIF (Condition, IfTrue, IfFalse)
    If Condition Then IIF = IfTrue Else IIF = IfFalse
End Function

' /////////////////////////////////////////////////////////////////////////////
' IIF function for QB for strings

Function IIFS$ (Condition, IfTrue$, IfFalse$)
    If Condition Then IIFS$ = IfTrue$ Else IIFS$ = IfFalse$
End Function

' /////////////////////////////////////////////////////////////////////////////
' Split and join strings
' https://www.qb64.org/forum/index.php?topic=1073.0

'Combine all elements of in$() into a single string with delimiter$ separating the elements.

Function join$ (in$(), delimiter$)
    Dim result$
    Dim iLoop As Integer
    result$ = in$(LBound(in$))
    For iLoop = LBound(in$) + 1 To UBound(in$)
        result$ = result$ + delimiter$ + in$(iLoop)
    Next iLoop
    join$ = result$
End Function ' join$

' /////////////////////////////////////////////////////////////////////////////
' Split and join strings
' https://www.qb64.org/forum/index.php?topic=1073.0
'
' FROM luke, QB64 Developer
' Date: February 15, 2019, 04:11:07 AM
'
' Given a string of words separated by spaces (or any other character),
' splits it into an array of the words. I've no doubt many people have
' written a version of this over the years and no doubt there's a million
' ways to do it, but I thought I'd put mine here so we have at least one
' version. There's also a join function that does the opposite
' array -> single string.
'
' Code is hopefully reasonably self explanatory with comments and a little demo.
' Note, this is akin to Python/JavaScript split/join, PHP explode/implode.

'Split in$ into pieces, chopping at every occurrence of delimiter$. Multiple consecutive occurrences
'of delimiter$ are treated as a single instance. The chopped pieces are stored in result$().
'
'delimiter$ must be one character long.
'result$() must have been REDIMmed previously.

' Modified to handle multi-character delimiters

Sub split (in$, delimiter$, result$())
    Dim start As Integer
    Dim finish As Integer
    Dim iDelimLen As Integer
    ReDim result$(-1)

    iDelimLen = Len(delimiter$)

    start = 1
    Do
        'While Mid$(in$, start, 1) = delimiter$
        While Mid$(in$, start, iDelimLen) = delimiter$
            'start = start + 1
            start = start + iDelimLen
            If start > Len(in$) Then
                Exit Sub
            End If
        Wend
        finish = InStr(start, in$, delimiter$)
        If finish = 0 Then
            finish = Len(in$) + 1
        End If

        ReDim _Preserve result$(0 To UBound(result$) + 1)

        result$(UBound(result$)) = Mid$(in$, start, finish - start)
        start = finish + 1
    Loop While start <= Len(in$)
End Sub ' split

' /////////////////////////////////////////////////////////////////////////////
' FROM: String Manipulation
' found at abandoned, outdated and now likely malicious qb64 dot net website
' http://www.qb64.[net]/forum/index_topic_5964-0/
'
'SUMMARY:
'   Purpose:  A library of custom functions that transform strings.
'   Author:   Dustinian Camburides (dustinian@gmail.com)
'   Platform: QB64 (www.qb64.org)
'   Revision: 1.6
'   Updated:  5/28/2012

'SUMMARY:
'[Replace$] replaces all instances of the [Find] sub-string with the [Add] sub-string within the [Text] string.
'INPUT:
'Text: The input string; the text that's being manipulated.
'Find: The specified sub-string; the string sought within the [Text] string.
'Add: The sub-string that's being added to the [Text] string.

Function Replace$ (Text1 As String, Find1 As String, Add1 As String)
    ' VARIABLES:
    Dim Text2 As String
    Dim Find2 As String
    Dim Add2 As String
    Dim lngLocation As Long ' The address of the [Find] substring within the [Text] string.
    Dim strBefore As String ' The characters before the string to be replaced.
    Dim strAfter As String ' The characters after the string to be replaced.

    ' INITIALIZE:
    ' MAKE COPIESSO THE ORIGINAL IS NOT MODIFIED (LIKE ByVal IN VBA)
    Text2 = Text1
    Find2 = Find1
    Add2 = Add1

    lngLocation = InStr(1, Text2, Find2)

    ' PROCESSING:
    ' While [Find2] appears in [Text2]...
    While lngLocation
        ' Extract all Text2 before the [Find2] substring:
        strBefore = Left$(Text2, lngLocation - 1)

        ' Extract all text after the [Find2] substring:
        strAfter = Right$(Text2, ((Len(Text2) - (lngLocation + Len(Find2) - 1))))

        ' Return the substring:
        Text2 = strBefore + Add2 + strAfter

        ' Locate the next instance of [Find2]:
        lngLocation = InStr(1, Text2, Find2)

        ' Next instance of [Find2]...
    Wend

    ' OUTPUT:
    Replace$ = Text2
End Function ' Replace$

'' /////////////////////////////////////////////////////////////////////////////
'
'Sub SplitTest
'    Dim in$
'    Dim delim$
'    ReDim arrText$(0)
'    Dim iLoop%
'
'    delim$ = Chr$(10)
'    in$ = "this" + delim$ + "is" + delim$ + "a" + delim$ + "test"
'    Print "in$ = " + Chr$(34) + in$ + Chr$(34)
'    Print "delim$ = " + Chr$(34) + delim$ + Chr$(34)
'    split in$, delim$, arrText$()
'
'    For iLoop% = LBound(arrText$) To UBound(arrText$)
'        Print "arrText$(" + _Trim$(Str$(iLoop%)) + ") = " + Chr$(34) + arrText$(iLoop%) + Chr$(34)
'    Next iLoop%
'    Print
'    Print "Split test finished."
'End Sub ' SplitTest

'' /////////////////////////////////////////////////////////////////////////////
'
'Sub SplitAndReplaceTest
'    Dim in$
'    Dim out$
'    Dim iLoop%
'    ReDim arrText$(0)
'
'    Print "-------------------------------------------------------------------------------"
'    Print "SplitAndReplaceTest"
'    Print
'
'    Print "Original value"
'    in$ = "This line 1 " + Chr$(13) + Chr$(10) + "and line 2" + Chr$(10) + "and line 3 " + Chr$(13) + "finally THE END."
'    out$ = in$
'    out$ = Replace$(out$, Chr$(13), "\r")
'    out$ = Replace$(out$, Chr$(10), "\n")
'    out$ = Replace$(out$, Chr$(9), "\t")
'    Print "in$ = " + Chr$(34) + out$ + Chr$(34)
'    Print
'
'    Print "Fixing linebreaks..."
'    in$ = Replace$(in$, Chr$(13) + Chr$(10), Chr$(13))
'    in$ = Replace$(in$, Chr$(10), Chr$(13))
'    out$ = in$
'    out$ = Replace$(out$, Chr$(13), "\r")
'    out$ = Replace$(out$, Chr$(10), "\n")
'    out$ = Replace$(out$, Chr$(9), "\t")
'    Print "in$ = " + Chr$(34) + out$ + Chr$(34)
'    Print
'
'    Print "Splitting up..."
'    split in$, Chr$(13), arrText$()
'
'    For iLoop% = LBound(arrText$) To UBound(arrText$)
'        out$ = arrText$(iLoop%)
'        out$ = Replace$(out$, Chr$(13), "\r")
'        out$ = Replace$(out$, Chr$(10), "\n")
'        out$ = Replace$(out$, Chr$(9), "\t")
'        Print "arrText$(" + cstr$(iLoop%) + ") = " + Chr$(34) + out$ + Chr$(34)
'    Next iLoop%
'    Print
'
'    Print "SplitAndReplaceTest finished."
'End Sub ' SplitAndReplaceTest
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END GENERAL PURPOSE FUNCTIONS
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' BEGIN handle MEM for any type
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' QB64 GPT Just Rewrote My Code
' https://qb64phoenix.com/forum/showthread.php?tid=2728

' And the revisions QB64 GPT made (after minor changes and me asking it to redo some syntax errors):
' It separated out a lot of processing out to separate subs.
' It is quite impressive how little input I had to give it to fix its mistakes.
' The code actually worked just as well as it did before the changes, which blows my mind.
' It actually even listened to me when I told it that it would need to cast an OFFSET type by using VAL(STR$(var)).
' To be fair, I had to tell it "ByRef" was invalid and a couple of other things.
' I also had to declare "y" each time it was used. But the last iteration only required me to declare "y".
' I think that is a decent enough result. Too bad I can't get it to be this good every time.
' 1) This is the paid version of GPT4. I am on the plus plan, so whatever that one has.
' 2) I think I deleted the session. Sorry. I only used it for as long as I needed it.
' 3) I don't know what the hard limit is. It's in "tokens", which I have no idea how those are calculated.
' I got a pretty large source code from one output and it can take a lot of input. I would just say it can handle quite a bit.
' The GPT I used was one I trained using the Wiki, sample code, etc. At the time, it used GPT4.
' Custom GPTs now use 4o. I will probably need to republish it to take advantage of 4o for it.
' I guess training is the wrong word. A custom GPT has a "knowledge base".
' You can have a maximum of 20 files.
' It can use those files to create an answer. Even a zip folder can be used.
' It will basically only use the knowledge base when specifically asked. Otherwise, it is using whatever it already had in its model.
' As for testing code and such, you can create "actions" for your GPT that allow it to do things outside of ChatGPT, including REST API.
' So if dbox ever made a REST API for QBJS, you could definitely have it write QBJS code and then ask it to run it.

Sub anyArg (args() As _MEM)
    Dim As _Unsigned Integer x, y
    Dim As _Unsigned _Offset z
    Dim As _Unsigned Long size, elementsize

    For x = LBound(args) To UBound(args)
        If _MemExists(args(x)) Then
            z = 0
            size = Val(Str$(args(x).SIZE))
            elementsize = Val(Str$(args(x).ELEMENTSIZE))

            If _ReadBit(args(x).TYPE, 7) And _ReadBit(args(x).TYPE, 13) = 0 Then
                HandleNumericType args(x), size, elementsize, z
            ElseIf _ReadBit(args(x).TYPE, 8) Then
                HandleFloatingType args(x), size, elementsize, z
            ElseIf _ReadBit(args(x).TYPE, 9) Then
                HandleStringType args(x), size, elementsize
            ElseIf _ReadBit(args(x).TYPE, 13) And _ReadBit(args(x).TYPE, 7) Then
                HandleOffsetType args(x), size, elementsize, z
            ElseIf args(x).TYPE = 0 And args(x).SIZE > 0 Then
                HandleSoundType args(x)
            ElseIf _ReadBit(args(x).TYPE, 14) Then
                Print args(x).SIZE, "MEM"
                ' TODO: Handle other types if necessary
            End If

            If _ReadBit(args(x).TYPE, 11) Then
                Screen args(x).IMAGE
            End If
        End If
    Next
End Sub ' anyArg

' Subroutines for handling specific types
Sub HandleNumericType (arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset)
    If _ReadBit(arg.TYPE, 10) Then
        If _ReadBit(arg.TYPE, 16) Then
            Select Case elementsize
                Case 1
                    Dim As _Unsigned _Byte unsignedbytearray(1 To (size / elementsize))
                    ProcessArray_UByte unsignedbytearray(), arg, size, elementsize, z, "UBYTE ARRAY"
                Case 2
                    Dim As _Unsigned Integer unsignedintarray(1 To (size / elementsize))
                    ProcessArray_UInteger unsignedintarray(), arg, size, elementsize, z, "USHORT ARRAY"
                Case 4
                    Dim As _Unsigned Long unsignedlongarray(1 To (size / elementsize))
                    ProcessArray_ULong unsignedlongarray(), arg, size, elementsize, z, "ULONG ARRAY"
                Case 8
                    Dim As _Unsigned _Integer64 unsignedint64array(1 To (size / elementsize))
                    ProcessArray_UInt64 unsignedint64array(), arg, size, elementsize, z, "UINT64 ARRAY"
            End Select
        Else
            PrintSingleValue arg, size, elementsize
        End If
    Else
        If _ReadBit(arg.TYPE, 16) Then
            Select Case elementsize
                Case 1
                    Dim As _Byte bytearray(1 To (size / elementsize))
                    ProcessArray_Byte bytearray(), arg, size, elementsize, z, "BYTE ARRAY"
                Case 2
                    Dim As Integer intarray(1 To (size / elementsize))
                    ProcessArray_Integer intarray(), arg, size, elementsize, z, "SHORT ARRAY"
                Case 4
                    Dim As Long longarray(1 To (size / elementsize))
                    ProcessArray_Long longarray(), arg, size, elementsize, z, "LONG ARRAY"
                Case 8
                    Dim As _Integer64 int64array(1 To (size / elementsize))
                    ProcessArray_Int64 int64array(), arg, size, elementsize, z, "INT64 ARRAY"
            End Select
        Else
            PrintSingleValue arg, size, elementsize
        End If
    End If
End Sub ' HandleNumericType

Sub HandleFloatingType (arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset)
    If _ReadBit(arg.TYPE, 16) Then
        Select Case elementsize
            Case 4
                Dim As Single singlearray(1 To (size / elementsize))
                ProcessArray_Single singlearray(), arg, size, elementsize, z, "SINGLE ARRAY"
            Case 8
                Dim As Double doublearray(1 To (size / elementsize))
                ProcessArray_Double doublearray(), arg, size, elementsize, z, "DOUBLE ARRAY"
            Case 32
                Dim As _Float floatarray(1 To (size / elementsize))
                ProcessArray_Float floatarray(), arg, size, elementsize, z, "FLOAT ARRAY"
        End Select
    Else
        Select Case size
            Case 4
                Print _MemGet(arg, arg.OFFSET, Single), "SINGLE"
            Case 8
                Print _MemGet(arg, arg.OFFSET, Double), "DOUBLE"
            Case 32
                Print _MemGet(arg, arg.OFFSET, _Float), "FLOAT"
        End Select
    End If
End Sub ' HandleFloatingType

Sub HandleStringType (arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long)
    If _ReadBit(arg.TYPE, 16) Then
        Dim As String stringarray(1 To (size / elementsize))
        Dim As _Unsigned Long y
        For y = LBound(stringarray) To UBound(stringarray)
            stringarray(y) = Space$(elementsize)
            _MemGet arg, (arg.OFFSET) + (y * elementsize - elementsize), stringarray(y)
            Print stringarray(y), "STRING ARRAY"
        Next
    Else
        Dim As String stringtest: stringtest = Space$(elementsize)
        _MemGet arg, arg.OFFSET, stringtest
        Print stringtest
    End If
End Sub ' HandleStringType

Sub HandleOffsetType (arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset)
    If _ReadBit(arg.TYPE, 10) Then
        If _ReadBit(arg.TYPE, 16) Then
            Dim As _Unsigned _Offset unsignedoffsetarray(1 To (size / elementsize))
            ProcessArray_UOffset unsignedoffsetarray(), arg, size, elementsize, z, "ULONG_PTR ARRAY"
        Else
            Print _MemGet(arg, arg.OFFSET, _Unsigned _Offset), "ULONG_PTR"
        End If
    Else
        If _ReadBit(arg.TYPE, 16) Then
            Dim As _Offset offsetarray(1 To (size / elementsize))
            ProcessArray_Offset offsetarray(), arg, size, elementsize, z, "LONG_PTR ARRAY"
        Else
            Print _MemGet(arg, arg.OFFSET, _Offset), "LONG_PTR"
        End If
    End If
End Sub ' HandleOffsetType

Sub HandleSoundType (arg As _MEM)
    If Not _SndPlaying(arg.SOUND) Then
        _SndPlay (arg.SOUND)
    End If
    Print "SOUND", arg.SIZE, arg.ELEMENTSIZE
End Sub ' HandleSoundType

' Subroutines for processing arrays
Sub ProcessArray_UByte (unsignedbytearray() As _Unsigned _Byte, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(unsignedbytearray) To UBound(unsignedbytearray)
        _MemGet arg, arg.OFFSET + z, unsignedbytearray(y)
        z = z + elementsize
        Print unsignedbytearray(y), typeName
    Next
End Sub ' ProcessArray_UByte

Sub ProcessArray_UInteger (unsignedintarray() As _Unsigned Integer, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(unsignedintarray) To UBound(unsignedintarray)
        _MemGet arg, arg.OFFSET + z, unsignedintarray(y)
        z = z + elementsize
        Print unsignedintarray(y), typeName
    Next
End Sub ' ProcessArray_UInteger

Sub ProcessArray_ULong (unsignedlongarray() As _Unsigned Long, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(unsignedlongarray) To UBound(unsignedlongarray)
        _MemGet arg, arg.OFFSET + z, unsignedlongarray(y)
        z = z + elementsize
        Print unsignedlongarray(y), typeName
    Next
End Sub ' ProcessArray_ULong

Sub ProcessArray_UInt64 (unsignedint64array() As _Unsigned _Integer64, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(unsignedint64array) To UBound(unsignedint64array)
        _MemGet arg, arg.OFFSET + z, unsignedint64array(y)
        z = z + elementsize
        Print unsignedint64array(y), typeName
    Next
End Sub ' ProcessArray_UInt64

Sub ProcessArray_Byte (bytearray() As _Byte, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(bytearray) To UBound(bytearray)
        _MemGet arg, arg.OFFSET + z, bytearray(y)
        z = z + elementsize
        Print bytearray(y), typeName
    Next
End Sub ' ProcessArray_Byte

Sub ProcessArray_Integer (intarray() As Integer, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(intarray) To UBound(intarray)
        _MemGet arg, arg.OFFSET + z, intarray(y)
        z = z + elementsize
        Print intarray(y), typeName
    Next
End Sub ' ProcessArray_Integer

Sub ProcessArray_Long (longarray() As Long, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(longarray) To UBound(longarray)
        _MemGet arg, arg.OFFSET + z, longarray(y)
        z = z + elementsize
        Print longarray(y), typeName
    Next
End Sub ' ProcessArray_Long

Sub ProcessArray_Int64 (int64array() As _Integer64, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(int64array) To UBound(int64array)
        _MemGet arg, arg.OFFSET + z, int64array(y)
        z = z + elementsize
        Print int64array(y), typeName
    Next
End Sub ' ProcessArray_Int64

Sub ProcessArray_Single (singlearray() As Single, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(singlearray) To UBound(singlearray)
        _MemGet arg, arg.OFFSET + z, singlearray(y)
        z = z + elementsize
        Print singlearray(y), typeName
    Next
End Sub ' ProcessArray_Single

Sub ProcessArray_Double (doublearray() As Double, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(doublearray) To UBound(doublearray)
        _MemGet arg, arg.OFFSET + z, doublearray(y)
        z = z + elementsize
        Print doublearray(y), typeName
    Next
End Sub ' ProcessArray_Double

Sub ProcessArray_Float (floatarray() As _Float, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(floatarray) To UBound(floatarray)
        _MemGet arg, arg.OFFSET + z, floatarray(y)
        z = z + elementsize / 2
        Print floatarray(y), typeName
    Next
End Sub ' ProcessArray_Float

Sub ProcessArray_UOffset (unsignedoffsetarray() As _Unsigned _Offset, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(unsignedoffsetarray) To UBound(unsignedoffsetarray)
        _MemGet arg, arg.OFFSET + z, unsignedoffsetarray(y)
        z = z + elementsize
        Print unsignedoffsetarray(y), typeName
    Next
End Sub ' ProcessArray_UOffset

Sub ProcessArray_Offset (offsetarray() As _Offset, arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long, z As _Unsigned _Offset, typeName As String)
    Dim As _Unsigned Long y
    For y = LBound(offsetarray) To UBound(offsetarray)
        _MemGet arg, arg.OFFSET + z, offsetarray(y)
        z = z + elementsize
        Print offsetarray(y), typeName
    Next
End Sub ' ProcessArray_Offset

Sub PrintSingleValue (arg As _MEM, size As _Unsigned Long, elementsize As _Unsigned Long)
    Select Case size
        Case 1
            Print _MemGet(arg, arg.OFFSET, _Byte), "BYTE"
        Case 2
            Print _MemGet(arg, arg.OFFSET, Integer), "SHORT"
        Case 4
            Print _MemGet(arg, arg.OFFSET, Long), "LONG"
        Case 8
            Print _MemGet(arg, arg.OFFSET, _Integer64), "INT64"
    End Select
End Sub ' PrintSingleValue
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
' END handle MEM for any type
' ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

' ################################################################################################################################################################
' BEGIN DEBUGGING ROUTINES #DEBUG
' ################################################################################################################################################################

' /////////////////////////////////////////////////////////////////////////////
' Prints MyString to console with linebreaks.

' Thanks to:
' SpriggsySpriggs for how to use the QB64 debug console:
' https://www.qb64.org/forum/index.php?topic=3949.0

Sub DebugPrint (MyString As String)
    If cDebugEnabled = TRUE Then
        ReDim arrLines(-1) As String
        Dim iLoop As Integer
        split MyString, Chr$(13), arrLines()
        For iLoop = LBound(arrLines) To UBound(arrLines)
            _Echo arrLines(iLoop)
        Next iLoop
    End If
End Sub ' DebugPrint

' /////////////////////////////////////////////////////////////////////////////
' Simply prints s$ to console (no linebreaks).

Sub DebugPrint1 (s$)
    If cDebugEnabled = TRUE Then
        _Echo s$
    End If
End Sub ' DebugPrint1

' ################################################################################################################################################################
' END DEBUGGING ROUTINES @DEBUG
' ################################################################################################################################################################
Reply
#2
Did you get a chance to try out that stuff I suggested in your other thread, madscijr?
Tread on those who tread on you

Reply
#3
(06-16-2024, 01:37 AM)i'll SpriggsySpriggs Wrote: Did you get a chance to try out that stuff I suggested in your other thread, madscijr?
I did, didn't work. Some of the code is still in there, but I commented it out. The union thing and how to replicate that is confusing for me, I would need a concrete example. For now I did figure out the messages to at least read the main keyboard. And I figured out how to read the absolute position of each mouse pointer, and not just the deltas. It would really help if it could operate off the regular QB64PE screen's hwnd, and not have to draw on the screen using API functions, but that can at least be worked around.
Reply




Users browsing this thread: 1 Guest(s)