Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fixup 2 Gears
#1
As posted at BASIC4ALL:
Code: (Select All)
Screen 12: For N = 0 To 15: Palette N, N * 263172: Next N
For Z = 0 To 100 Step .25: For A = 0 To 6.2831853 Step .001
        R = 100 + Cos(20 * A + Z / 20) * 15
        X1 = Cos(A) * R + 220: Y1 = Sin(A) * R / 3 + 240 - Z / 2
        R = 50 + Sin(-10 * A + Z / 20) * 15
        X2 = Cos(A) * R + 370: Y2 = Sin(A) * R / 3 + 240 - Z / 2
        PSet (X1, Y1), Z * .125 + 2.5: PSet (X2, Y2), Z * .125 + 2.5
        If Z = 100 Then Line (220, 240 - Z / 2)-(X1, Y1), 8: Line (370, 240 - Z / 2)-(X2, Y2), 5
Next A: Next Z

   


B+ Mods
Code: (Select All)
_Title "Fixed 2 Turning Gears mod B+ 2023-02-25"
Screen 12: For N = 0 To 15: Palette N, N * 263172: Next N
Do: Cls: For Z = 0 To 20 Step .5: For A = 0 To 6.2831853 Step .001
            R = 100 + Cos(20 * A) * 15: X1 = Cos(A + ao) * R + 220: Y1 = Sin(A + ao) * R / 3 + 240 - Z / 2
            R = 50 + Sin(-10 * A) * 15: X2 = Cos(A - 2 * ao) * R + 390: Y2 = Sin(A - 2 * ao) * R / 3 + 240 - Z / 2
            PSet (X1, Y1), Z * .125 + 2.5: PSet (X2, Y2), Z * .125 + 2.5
            If Z = 20 Then Line (220, 240 - Z / 2)-(X1, Y1), 8: Line (370, 240 - Z / 2)-(X2, Y2), 5
Next A: Next Z: _Display: _Limit 200: ao = ao + .04: Loop

   
b = b + ...
Reply
#2
great mark Wink
Reply
#3
Fix a 370 that should have been 390 and get rid of palette for an even coloring by switch to modern graphics screen:
Code: (Select All)
_Title "Fixed 2 Turning Gears mod B+ 2023-02-25" ' https://qb64phoenix.com/forum/showthread.php?tid=1503&pid=13854#pid13854
Screen _NewImage(640, 480, 32)
Do: Cls: For Z = 0 To 40: For A = 0 To 6.2831853 Step .0006
            R = 100 + Cos(20 * A) * 15: X1 = Cos(A + ao) * R + 220: Y1 = Sin(A + ao) * R / 3 + 240 - Z / 2
            R = 50 + Sin(-10 * A) * 15: X2 = Cos(A - 2 * ao) * R + 390: Y2 = Sin(A - 2 * ao) * R / 3 + 240 - Z / 2
            PSet (X1, Y1), _RGB32(Z / 40 * 200): PSet (X2, Y2), _RGB32(Z / 40 * 160)
            If Z = 40 Then Line (220, 240 - Z / 2)-(X1, Y1), _RGB32(200): Line (390, 240 - Z / 2)-(X2, Y2), _RGB32(160)
Next A: Next Z: _Display: _Limit 200: ao = ao + .04: Loop


Attached Files Image(s)
   
b = b + ...
Reply
#4
Nice fixup of Charlie's cogs. Any chance of colour in there too? (I couldn't decipher that bit).  Smile
Of all the places on Earth, and all the planets in the Universe, I'd rather live here (Perth, W.A.) Big Grin
Please visit my Website at: http://oldendayskids.blogspot.com/
Reply
#5
(02-25-2023, 10:53 PM)PhilOfPerth Wrote: Nice fixup of Charlie's cogs. Any chance of colour in there too? (I couldn't decipher that bit).  Smile

Yes play with the _RGB32( ) numbers. In 2nd code posted I have shades of Grey by using only one argument in _RBG32.
You can switch them to _Rgb32(Red, Green, Blue) where Red, Green, Blue is number between 0 and 255.

For shading, go lighter as Z goes to 40, higher red, green, blue numbers.
b = b + ...
Reply
#6
(02-25-2023, 11:23 PM)bplus Wrote:
(02-25-2023, 10:53 PM)PhilOfPerth Wrote: Nice fixup of Charlie's cogs. Any chance of colour in there too? (I couldn't decipher that bit).  Smile

Yes play with the _RGB32( ) numbers. In 2nd code posted I have shades of Grey by using only one argument in _RBG32.
You can switch them to _Rgb32(Red, Green, Blue) where Red, Green, Blue is number between 0 and 255.

For shading, go lighter as Z goes to 40, higher red, green, blue numbers.

Got it! Thanks bplus, I learned something today!
Of all the places on Earth, and all the planets in the Universe, I'd rather live here (Perth, W.A.) Big Grin
Please visit my Website at: http://oldendayskids.blogspot.com/
Reply
#7
Thumbs Up 
Very good! Especially the spinning wheels. I should really look into graphics under QB64. - I put that together.

Code: (Select All)
'Zahnraeder, bplus - 25. Feb. 2023

Screen 12
For N = 0 To 15
  Palette N, N * 263172
Next N

For Z = 0 To 100 Step .25
  For A = 0 To 6.2831853 Step .001
    R = 100 + Cos(20 * A + Z / 20) * 15
    X1 = Cos(A) * R + 220: Y1 = Sin(A) * R / 3 + 240 - Z / 2
    R = 50 + Sin(-10 * A + Z / 20) * 15
    X2 = Cos(A) * R + 370: Y2 = Sin(A) * R / 3 + 240 - Z / 2
    PSet (X1, Y1), Z * .125 + 2.5
    PSet (X2, Y2), Z * .125 + 2.5
    If Z = 100 Then
      Line (220, 240 - Z / 2)-(X1, Y1), 8
      Line (370, 240 - Z / 2)-(X2, Y2), 5
    End If
  Next A
Next Z

Locate CsrLin + 2, 2
Print "Press ESC to continue!"

Do
  'Bild stehen lassen bis Escape gedrueckt wurde.
Loop Until InKey$ = Chr$(27)

'Drehende Zahnraeder
_Title "Fixed 2 Turning Gears mod B+ 2023-02-25"
Screen 12
For N = 0 To 15
  Palette N, N * 263172
Next N

Do
  Cls
  For Z = 0 To 20 Step .5
    For A = 0 To 6.2831853 Step .001
      R = 100 + Cos(20 * A) * 15: X1 = Cos(A + ao) * R + 220
      Y1 = Sin(A + ao) * R / 3 + 240 - Z / 2
      R = 50 + Sin(-10 * A) * 15: X2 = Cos(A - 2 * ao) * R + 390
      Y2 = Sin(A - 2 * ao) * R / 3 + 240 - Z / 2
      PSet (X1, Y1), Z * .125 + 2.5
      PSet (X2, Y2), Z * .125 + 2.5
      If Z = 20 Then
        Line (220, 240 - Z / 2)-(X1, Y1), 8
        Line (370, 240 - Z / 2)-(X2, Y2), 5
      End If
    Next A
  Next Z
  _Display
  _Limit 200
  ao = ao + .04
Loop Until InKey$ = Chr$(27)

_Title "Fixed 2 Turning Gears mod B+ 2023-02-25"
'https://qb64phoenix.com/forum/showthread.php?tid=1503&pid=13854#pid13854

Screen _NewImage(640, 480, 32)
Do
  Cls
  For Z = 0 To 40
    For A = 0 To 6.2831853 Step .0006
      R = 100 + Cos(20 * A) * 15
      X1 = Cos(A + ao) * R + 220
      Y1 = Sin(A + ao) * R / 3 + 240 - Z / 2
      R = 50 + Sin(-10 * A) * 15
      X2 = Cos(A - 2 * ao) * R + 390
      Y2 = Sin(A - 2 * ao) * R / 3 + 240 - Z / 2
      PSet (X1, Y1), _RGB32(Z / 40 * 200)
      PSet (X2, Y2), _RGB32(Z / 40 * 160)
      If Z = 40 Then
        Line (220, 240 - Z / 2)-(X1, Y1), _RGB32(200)
        Line (390, 240 - Z / 2)-(X2, Y2), _RGB32(160)
      End If
    Next A
  Next Z
  _Display
  _Limit 200
  ao = ao + .04
Loop Until InKey$ = Chr$(27)

End
Reply
#8
wow nice mods
Reply




Users browsing this thread: 3 Guest(s)