Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New and improved SICK project
#21
Yes! I could easily add a prompt to load Scrnedit file into program array.
Note however that the current editor in the interpreter is full screen and not line number based.

btw: It took 16 lines of code to LoadProgram in Scrnedit to copy edit array to program array.
I noticed Sick64d9.zip has 0 downloads. Are you looking at the most recent mods?
Reply
#22
(10-06-2022, 12:44 AM)eoredson Wrote: btw: It took 16 lines of code to LoadProgram in Scrnedit to copy edit array to program array.
I noticed Sick64d9.zip has 0 downloads. Are you looking at the most recent mods?
I will go acquire it but a few more days could pass before I report again. Thank you.
Reply
#23
Erik

sorry if i bothering you 

but i don't get it why i receive error in line 10

' set title icon

$ExeIcon:'SIC64.ico'


string constant should be fine inside ""


Attached Files Image(s)
   
Reply
#24
@Aurel try ".\filename" QB64 for some reason is more picky with .ico files. maybe an updated version of QB64pe too?

Update: just noticed a space between $ and ExeIcon that should not be there but the error message seems like that is not an issue.
b = b + ...
Reply
#25
(10-06-2022, 07:09 PM)aurel Wrote: Erik

sorry if i bothering you 

but i don't get it why i receive error in line 10

' set title icon

$ExeIcon:'SIC64.ico'
All the files, source code and icon should be in the same directory level as "QB64PE.EXE" before compiling.
Reply
#26
(09-28-2022, 05:03 AM)eoredson Wrote: btw; what is "as" without any preceding variable?
I had forgotten to tell you a few days ago that a line beginning with "AS" has to be inside the definition of an UDT (User-Defined Type). This is to declare more than one field of the same type without extra typing. The same could be done with "DIM" (global) or "STATIC" (inside subprograms only) to declare multiple variables of the same type. For example:

DIM A AS INTEGER, B AS INTEGER, C AS INTEGER, D AS INTEGER

could be written as:

DIM AS INTEGER A, B, C, D

Inside an UDT, however, the "old" style forced multiple lines or colons to be used to declare multiple fields, even if they were of the same type. Consider this:

TYPE MYUDT
AS INTEGER A, B, C, D
END TYPE

instead of this:

TYPE MYUDT
A AS INTEGER
B AS INTEGER
C AS INTEGER
D AS INTEGER
END TYPE

which would have had to be typed in QuickBASIC or QBasic. The "new" style for UDT looks a bit confusing but it's meant to save time typing stuff. This is even more important if the program is subjected to "OPTION _EXPLICIT" in which every variable must be declared.
Reply
#27
Quote:All the files, source code and icon should be in the same directory level as "QB64PE.EXE" before compiling


so you want say that whole set of files must be in same folder where is
QB64.exe ?

why is that ?

ahhh ..............OK i can try that Smile
Reply
#28
Ok i put whole set into QB64.exe folder then compile
and i get 3 compilation progress

Huh 

is that normal?

and after that ..there is no new exe SICK64.exe

i am using v0.60..is that problem?


Attached Files Image(s)
   
Reply
#29
(10-07-2022, 12:00 PM)aurel Wrote: Ok i put whole set into QB64.exe folder then compile
and i get 3 compilation progress

Huh 

is that normal?

and after that ..there is no new exe SICK64.exe

i am using v0.60..is that problem?
"SIC64" is only for 32-bit. The OP had problems making one attempt at least to port it to 64-bit.
Reply
#30
I converted to "SIC" format a graphics program. It comes from a book called "MORE TRS-80 BASIC" by D.Inman, R.Zamora and B.Albrecht. (c)1981 "Wiley self-teaching guides".

It fakes TRS-80 Model III graphics, which was produced from CHR$(128) to CHR$(191). That's why the "SIC" code doesn't bother checking for value greater than 191 in the "GOSUB" subroutine. I purposely tried to center the graphics on a much-larger screen than the ancient one. I added the check for "S" going below one but maybe it's not necessary. I also added the delay loop and poll for escape key to press to quit the program.

The original source code is listed first but commented out. The converted code that runs follows.

Code: (Select All)
'20 cls
'25 s=10
'30 for n=0 to 330 step 66
'35 for r=0 to s
'40 a=rnd(2)-1
'b=rnd(2)-1
'c=rnd(2)-1
'd=rnd(2)-1
'e=rnd(2)-1
'f=rnd(2)-1
'50 if n=0 then m=0 else m=62*(n/66)
'100 ul=128+a+2*b+(2*c)^2+(2*d)^3+(2*e)^4+(2*f)^5
'110 ur=128+b+2*a+(2*d)^2+(2*c)^3+(2*f)^4+(2*e)^5
'120 ll=128+e+2*f+(2*c)^2+(2*d)^3+(2*a)^4+(2*b)^5
'130 lr=128+f+2*e+(2*d)^2+(2*c)^3+(2*b)^4+(2*a)^5
'210 print @544,chr$(191);
'print @144+n+r,chr$(ul);
'220 print @176+m-r,chr$(ur);
'print @912-m+r,chr$(ll);
'230 print @944-n-r,chr$(lr);
'235 next r
'237 s=s-1
'240 next n
'250 for wait=1 to 200: next wait
'300 goto 10

10 SCREEN 12
20 DO
30     P=544
40     Q=191
50     GOSUB 480
60     S=10
70     FOR N=0 TO 330 STEP 66
80         FOR R=0 TO S
90             A=INT(RND*2)
100            B=INT(RND*2)
110            C=INT(RND*2)
120            D=INT(RND*2)
130            E=INT(RND*2)
140            F=INT(RND*2)
150            IF N=0 THEN
160                M=0
170            ELSE
180                M=62*(N/66)
190            END IF
200            P=144+N+R
210            Q=128+A+2*B+(2*C)^2+(2*D)^3+(2*E)^4+(2*F)^5
220            GOSUB 480
230            P=176+M-R
240            Q=128+B+2*A+(2*D)^2+(2*C)^3+(2*F)^4+(2*E)^5
250            GOSUB 480
260            P=912-M+R
270            Q=128+E+2*F+(2*C)^2+(2*D)^3+(2*A)^4+(2*B)^5
280            GOSUB 480
290            P=944-N-R
300            Q=128+F+2*E+(2*D)^2+(2*C)^3+(2*B)^4+(2*A)^5
310            GOSUB 480
320        NEXT
330        S=S-1
340        IF S<1 THEN
350            EXIT FOR
360        END IF
370    NEXT
380    P=0
390    FOR Q=1 TO 10
400        PAUSE 0.05
410        IF INKEY$=CHR$(27) THEN
420            P=1
430            EXIT FOR
440        END IF
450    NEXT
460 LOOP UNTIL P=1
470 END
480 X=(MOD(P,64)+1)*8+48
490 Y=((P\64)+1)*12+120
500 LINE X,Y,STEP 7,11,0,"FB"
510 IF AND(Q,1)<>0 THEN
520     LINE X,Y,STEP 3,3,7,"FB"
530 END IF
540 IF AND(Q,2)<>0 THEN
550     LINE X+4,Y,STEP 3,3,7,"FB"
560 END IF
570 IF AND(Q,4)<>0 THEN
580     LINE X,Y+4,STEP 3,3,7,"FB"
590 END IF
600 IF AND(Q,8)<>0 THEN
610     LINE X+4,Y+4,STEP 3,3,7,"FB"
620 END IF
630 IF AND(Q,16)<>0 THEN
640     LINE X,Y+8,STEP 3,3,7,"FB"
650 END IF
660 IF AND(Q,32)<>0 THEN
670     LINE X+4,Y+8,STEP 3,3,7,"FB"
680 END IF
690 RETURN
Reply




Users browsing this thread: 3 Guest(s)