EDIT: My apologies, I gave wrong info previously. In this program I am NOT using a console window. I had two programs open at once and was looking at wrong code at the time. Sigh.
Really, no comments on this?
Let me demonstrate this action...
Below is a program I wrote (inspired by a screensaver from years ago), that displays the time on the screen in words.
It can use an .ini for settings, but you won't need that to see the program in action because it sets default values when an INI is not present.
The program will start full screen. Tap the letter "F" on your keyboard to toggle it in and out of full screen mode.
When the program is windowed, note that you can drag the window borders to resize it. Once resized, _RESIZE will become true. This is how I detect a change a change in the window size. This allows me to resize the text so that fits best in the available window. You should be able to freely size the window of toggle in and out of full screen by pressing "F" and the text should resize appropriately. However, the one hiccup that I have is that when I click on the "maximize" button, the _RESIZE never seems to get set to TRUE and as a result my program has no clue that the window size changed.
The main loop of the program that processes the time and displays it, starts on line number 326. Note that the first thing that I do is check for a resize of the window and then reconfigure everything to fit in the new window size if it has changed.
NOTE: For help with all options for the program, simply tap the "H" key while the program is running.
So, just to summarize, here is what I am looking for:
1) A way to determine when the maximize button on the window is clicked.
or
2) A way to detect that the window size has been changed when maximize was clicked. I would think that _RESIZE would be triggered, but it seems that it is not.
Really, no comments on this?
Let me demonstrate this action...
Below is a program I wrote (inspired by a screensaver from years ago), that displays the time on the screen in words.
It can use an .ini for settings, but you won't need that to see the program in action because it sets default values when an INI is not present.
The program will start full screen. Tap the letter "F" on your keyboard to toggle it in and out of full screen mode.
When the program is windowed, note that you can drag the window borders to resize it. Once resized, _RESIZE will become true. This is how I detect a change a change in the window size. This allows me to resize the text so that fits best in the available window. You should be able to freely size the window of toggle in and out of full screen by pressing "F" and the text should resize appropriately. However, the one hiccup that I have is that when I click on the "maximize" button, the _RESIZE never seems to get set to TRUE and as a result my program has no clue that the window size changed.
The main loop of the program that processes the time and displays it, starts on line number 326. Note that the first thing that I do is check for a resize of the window and then reconfigure everything to fit in the new window size if it has changed.
NOTE: For help with all options for the program, simply tap the "H" key while the program is running.
So, just to summarize, here is what I am looking for:
1) A way to determine when the maximize button on the window is clicked.
or
2) A way to detect that the window size has been changed when maximize was clicked. I would think that _RESIZE would be triggered, but it seems that it is not.
Code: (Select All)
$ScreenHide
Option _Explicit
Option Base 1
$ExeIcon:'WordClock.ico'
$VersionInfo:CompanyName=Hannes Sehestedt
$VersionInfo:FILEVERSION#=2,0,0,13
$VersionInfo:ProductName=Hannes Word Clock
$VersionInfo:LegalCopyright=(c) 2023 by Hannes Sehestedt
$Resize:On
' Hannes' Word Clock
' 2023 by Hannes Sehestedt
' Version 2.0.0.13
' May 31, 2023
ProgramStart:
' In the event that we need to restart the program as a result of an error, we will clear all current
' variables and start over completely clean
Clear
Dim ActiveTextBackgroundColor As Integer ' Holds a color value (0-255)
Dim ActiveTextColor As Integer ' Holds a color value (0-255)
Dim AdjustmentsMade As String ' Flag to indicate that screen resolution adjustments were made automatically to avoid illegal conditions
Dim AllText As String ' Contains a copy of all text that will be displayed on screen. Used to test font sizes.
Dim AM_PM As String ' This flag will be set to either "AM" or "PM"
Dim CharPerLine As Integer ' Number of characters that can fit on a line at a given screen and font size
Dim CharPosition As Integer ' Used to keep track of character positioning while manipulating strings
Dim CurrentDate As String ' Hold the entire date (Month / Day / Year) as a string
Dim CurrentMode As String ' Tracks the current mode. "Y" for fullscreen mode, "N" for windowed mode.
Dim CurrentTime As String ' Hold the entire time (Hours / Minutes / Seconds) as a string
Dim Day As Integer ' Day of the month (1-31) as a number
Dim DayOfWeek As Integer ' Day of the week (1-7) as a number
Dim DayOfWeekString(7) As String ' An array holding each day of the week as an English word
Dim DayString(31) As String ' An array holding each day of the month (1-31) as a string
Dim Decade As Integer ' The numerical value of the last 2 digits of the year
Dim DeskWidth As Long ' The width of the desktop in pixels
Dim DeskHeight As Long ' The height of the desktop in pixels
Dim DigitalHour As String ' Hours converted to a 2 digital string
Dim ff As Integer ' Used to store free file number
Dim FileLine As String ' Line read from a file
Dim Font As Long ' Handle to a font
Dim FontHeight As Integer ' Height of a font in windowed mode
Dim FontPath As String ' The name of the font, with path, used in windowed mode
Dim FontSize As Integer ' The fontsize used in windowed mode
Dim FontSizeToTest As Integer ' In the routine that tests fit of a font on the screen, this holds the current font size to be tested
Dim FontTooLarge As String ' Flag to indicate when a font is too large to properly display all text
Dim FontWidth As Integer ' Width of a font in windowed mode
Dim FullscreenFontHeight As Integer
Dim FullscreenFontPath As String ' The name of the font, with path, used in fullscreen mode
Dim FullscreenFontSize As Integer ' The fontsize used in fullscreen mode
Dim FullscreenFontWidth As Integer ' Width of a font in fullscreen mode
Dim handle As Long ' Stores a handle to the screen
Dim HandleErrors As String ' If set to "Y" then error handling is enabled, otherwise it is disabled
Dim High As Integer ' The height of a font undergoing testing to see if it allows text to properly fit on screen
Dim Horizontal As Integer ' The horizontal resolution used in windowed mode
Dim Hour As Integer ' Numerical value holding the current hour (0-23)
Dim HourString(12) As String ' The current hour as an English word. Since we use AM / PM this holds only one through twelve.
Dim InactiveTextBackgroundColor As Integer ' Holds a color value (0-255)
Dim InactiveTextColor As Integer ' Hold a color value (0-255)
Dim KeyPress As String ' Used to sore keystrokes from Inkey$
Dim LeapYear As Integer ' To to indicate if current year is a leap year. 1 = Leap Year, 0 = No Leap Year
Dim LineCount As Integer ' In the routine to set font sizes, this keeps track of how many lines of text a given font size will occupy
Dim MaxLines As Integer ' The maximum number of lines of text that will fit on the screen at a given screen and font size
Dim Minute As Integer ' The current minute as a numeral from 0 to 59
Dim MinuteString(59) As String ' An array hold minutes as English words from one to fifty-nine
Dim Month As Integer ' The current month as a number from 1 to 12
Dim MonthString(12) As String ' The current month as an English word (January, February, ... , November, December).
Dim MonthTable(12) As Integer ' A table with an offset for each month used to calculate what day of the week it is (Monday, Tuesday, etc).
Dim oldimage As Long ' holds the handle of a screen that is about to be removed from memory
Dim OldSecond As Integer ' A variable that is used to determine if the seconds have changed from the last time we checked
Dim ProgramVersion As String ' Holds the current program version
Dim Result1 As Integer ' A temporary variable
Dim Result2 As Integer ' A temporary variable
Dim Result3 As Integer ' A temporary variable
Dim Second As Integer ' The current seconds as a number (0-59)
Dim SecondString(59) As String ' The current seconds as an English word from one through fifty-nine
Dim ShowDigitalTime As String ' Set to "Y" to show digital time on the last line of the screen
Dim ShowTimeOnly As String ' Set to "Y" to show only the time without the date, otherwwise set to "N" to include the date in the display
Dim StartFullscreen As String ' Set to "Y" to start the program in fullscreen mode, "N" to start in windowed mode
Dim StatusLineBackgroundColor ' Holds a color value (0-255)
Dim StatusLineTextColor As Integer ' Holds a color value (0-255)
Dim Temp As Integer ' A temporary variable
Dim Temp2 As Integer ' A temporary variable
Dim TempString As String ' A temporary string of characters, used mainly in string manipulation routines
Dim Vertical As Integer ' Vertical resolution used in windowed mode
Dim Wide As Integer ' The width of a font undergoing testing to see if it allows text to properly fit on screen
Dim x As Integer ' General purpose counter used in FOR...NEXT loops
Dim Year As Integer ' Stores the current year
ProgramVersion$ = "1.0.4.12"
_Title "Hannes' Word Clock " + ProgramVersion$
' Default values used for entries not available from a .ini file and initialization of other variables
' NOTE: Font size is determined dynamically. The FontSize and FullscreenFontSize variables are set here simply to serve
' as starting points where the dynamic font adjustment routine can start.
DeskWidth = _DesktopWidth
DeskHeight = _DesktopHeight
FontPath$ = Environ$("SYSTEMROOT") + "\fonts\lucon.ttf"
FullscreenFontPath$ = Environ$("SYSTEMROOT") + "\fonts\lucon.ttf"
FontSize = 14
FullscreenFontSize = 35
Horizontal = 800
Vertical = 600
StartFullscreen$ = "Y"
ShowDigitalTime$ = "Y"
ShowTimeOnly$ = "N"
AllText$ = "" ' Initialize the string to an empty state
HandleErrors$ = "Y"
ActiveTextBackgroundColor = 4
ActiveTextColor = 15
InactiveTextBackgroundColor = 0
InactiveTextColor = 8
StatusLineBackgroundColor = 2
StatusLineTextColor = 0
' If a .ini file exists, open it and parse it. Values found in the .ini will override the defaults
' defined above.
If _FileExists("WordClock.ini") Then
ff = FreeFile
Open "WordClock.ini" For Input As #ff
Do Until EOF(ff)
Line Input #ff, FileLine$
' If line starts with a colon (:), it is a comment. Ignore it.
If Left$(FileLine$, 1) = ":" Then _Continue
' If line starts with "FONT:" then we are reading in the name of the font to be used. This is NOT case sensitive.
If UCase$(Left$(FileLine$, 5)) = "FONT:" Then
TempString$ = Environ$("SYSTEMROOT") + "\fonts\" + Right$(FileLine$, (Len(FileLine$) - 5))
If _FileExists(TempString$) Then FontPath$ = TempString$
End If
' If line starts with "FULLSCREENFONT:" then we are reading in the name of the font to be used
' in fullscreen mode. This is NOT case sensitive.
If UCase$(Left$(FileLine$, 15)) = "FULLSCREENFONT:" Then
TempString$ = Environ$("SYSTEMROOT") + "\fonts\" + Right$(FileLine$, (Len(FileLine$) - 15))
If _FileExists(TempString$) Then FullscreenFontPath$ = TempString$
End If
' If line starts with "WINDOWHORIZONTAL:", use value to set the horizontal window size.
If UCase$(Left$(FileLine$, 17)) = "WINDOWHORIZONTAL:" Then
Horizontal = Val(Right$(FileLine$, (Len(FileLine$) - 17)))
End If
' If line starts with "WINDOWVERTICAL:", use value to set the vertical window size.
If UCase$(Left$(FileLine$, 15)) = "WINDOWVERTICAL:" Then
Vertical = Val(Right$(FileLine$, (Len(FileLine$) - 15)))
End If
' If line starts with "STARTFULLSCREEN:", read value that will determine if the program is to be
' started fullscreen or in a window.
If UCase$(Left$(FileLine$, 16)) = "STARTFULLSCREEN:" Then
StartFullscreen$ = UCase$(Right$(FileLine$, (Len(FileLine$) - 16)))
End If
' If line starts with SHOWTIMEONLY: then set the variable ShowTimeOnly$ to "Y" to indicate that only the time
' should be displayed without the date.
If UCase$(Left$(FileLine$, 13)) = "SHOWTIMEONLY:" Then
ShowTimeOnly$ = UCase$(Right$(FileLine$, (Len(FileLine$) - 13)))
End If
' If line starts with "SHOWDIGITALTIME:", read value that will determine if digital time is
' to be displayed on the last line of the screen.
If UCase$(Left$(FileLine$, 16)) = "SHOWDIGITALTIME:" Then
ShowDigitalTime$ = UCase$(Right$(FileLine$, (Len(FileLine$) - 16)))
End If
' If line starts with "HANDLEERRORS:", read value that will determine if error handling is to be
' enabled or not.
If UCase$(Left$(FileLine$, 13)) = "HANDLEERRORS:" Then
HandleErrors$ = UCase$(Right$(FileLine$, (Len(FileLine$) - 13)))
End If
' Color setting for ActiveTextColor
If UCase$(Left$(FileLine$, 16)) = "ACTIVETEXTCOLOR:" Then
ActiveTextColor = Val(Right$(FileLine$, (Len(FileLine$) - 16)))
End If
' Color setting for ActiveTextBackgroundColor
If UCase$(Left$(FileLine$, 26)) = "ACTIVETEXTBACKGROUNDCOLOR:" Then
ActiveTextBackgroundColor = Val(Right$(FileLine$, (Len(FileLine$) - 26)))
End If
' Color setting for InactiveTextColor
If UCase$(Left$(FileLine$, 18)) = "INACTIVETEXTCOLOR:" Then
InactiveTextColor = Val(Right$(FileLine$, (Len(FileLine$) - 18)))
End If
' Color setting for InactiveTextBackgroundColor
If UCase$(Left$(FileLine$, 28)) = "INACTIVETEXTBACKGROUNDCOLOR:" Then
InactiveTextBackgroundColor = Val(Right$(FileLine$, (Len(FileLine$) - 28)))
End If
' Color setting for StatusLineTextColor
If UCase$(Left$(FileLine$, 20)) = "STATUSLINETEXTCOLOR:" Then
StatusLineTextColor = Val(Right$(FileLine$, (Len(FileLine$) - 20)))
End If
' Color setting for StatusLineBackgroundColor
If UCase$(Left$(FileLine$, 26)) = "STATUSLINEBACKGROUNDCOLOR:" Then
StatusLineBackgroundColor = Val(Right$(FileLine$, (Len(FileLine$) - 26)))
End If
Loop
Close #ff
' If HandleErrors$ is set to "Y" then enable error handling
If HandleErrors$ = "Y" Then
On Error GoTo HandleErrors
End If
End If
' Setup screen for either fullscreen or windowed mode
' Set an initial value for current screen mode (fullscreen or not fullscreen).
If StartFullscreen$ = "Y" Then
CurrentMode$ = "FULLSCREEN"
Else
CurrentMode$ = "WINDOWED"
End If
SetupScreen:
If CurrentMode$ = "FULLSCREEN" Then
handle& = _NewImage(_DesktopWidth, _DesktopHeight, 256)
Screen handle&
_FullScreen
_ScreenShow
_Delay .5
GoSub FindLargestFontSize
Font& = _LoadFont(FullscreenFontPath$, FullscreenFontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(_DesktopHeight / High)
FullscreenFontWidth = _FontWidth
FullscreenFontHeight = _FontHeight
Else
handle& = _NewImage(Horizontal, Vertical, 256)
Screen handle&
_FullScreen _Off
_ScreenShow
_Delay .5
GoSub FindLargestFontSize
Font& = _LoadFont(FontPath$, FontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(Vertical / High)
FontWidth = _FontWidth
FontHeight = _FontHeight
End If
' Read the spelled out version of various elements into arrays. This will save time later so that we don't have to constantly
' parse this over and over in out main program loop.
Restore DayOfWeek
For x = 1 To 7
Read DayOfWeekString$(x)
Next x
Restore Day
For x = 1 To 31
Read DayString$(x)
Next x
Restore Month
For x = 1 To 12
Read MonthString$(x)
Next x
Restore Hour
For x = 1 To 12
Read HourString$(x)
Next x
Restore Minute
For x = 1 To 59
Read MinuteString$(x)
Next x
Restore Second
For x = 1 To 59
Read SecondString$(x)
Next x
Restore MonthTable
For x = 1 To 12
Read MonthTable(x)
Next x
Cls
' Clear the keyboard buffer before we enter the main program loop.
Do While InKey$ <> ""
Loop
' This is the main loop that retrieves the date and time, breaks it down into individual components, and then
' displays the time and date in words.
Do
_Limit 60 ' Limit the number of times that we perform this loop to a maximum of 60 iterations per second
If _Resize Then
'If we are NOT running fullscreen, then resize the screen appropriately.
If (_ResizeWidth <> _DesktopWidth) And (_ResizeHeight <> _DesktopHeight) Then
Horizontal = _ResizeWidth: Vertical = _ResizeHeight
oldimage& = handle&
handle& = _NewImage(Horizontal, Vertical, 256)
Screen handle&
_FullScreen _Off
_FreeImage oldimage&
_Delay .5
GoSub FindLargestFontSize
Font& = _LoadFont(FontPath$, FontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(Vertical / High)
FontWidth = _FontWidth
FontHeight = _FontHeight
End If
End If
' The lines below check for any keypresses. If a hotkey is pressed, then we take the appropriate action.
' Pressing any other key will exit the program. This is most useful when the program is being used as a
' screensaver.
KeyPress$ = InKey$
Select Case KeyPress$
Case ""
Exit Select
Case "D", "d"
If ShowDigitalTime$ = "Y" Then
ShowDigitalTime$ = "N"
Else
ShowDigitalTime$ = "Y"
End If
Case "F", "f"
If CurrentMode = "WINDOWED" Then
CurrentMode = "FULLSCREEN"
_Display
oldimage& = handle&
handle& = _NewImage(_DesktopWidth, _DesktopHeight, 256)
Screen handle&
_Delay .5
_FullScreen , _Smooth
_FreeImage oldimage&
GoSub FindLargestFontSize
_AutoDisplay
Font& = _LoadFont(FullscreenFontPath$, FullscreenFontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(_DesktopHeight / High)
FullscreenFontWidth = _FontWidth
FullscreenFontHeight = _FontHeight
ElseIf CurrentMode = "FULLSCREEN" Then
CurrentMode = "WINDOWED"
oldimage& = handle&
handle& = _NewImage(Horizontal, Vertical, 256)
Screen handle&
_Delay .5
_FullScreen _Off
_FreeImage oldimage&
GoSub FindLargestFontSize
Font& = _LoadFont(FontPath$, FontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(Vertical / High)
FontWidth = _FontWidth
FontHeight = _FontHeight
End If
_Delay .5
Case "S", "s"
GoSub DisplayStats
Case "T", "t"
If ShowTimeOnly$ = "Y" Then
ShowTimeOnly$ = "N"
Else
ShowTimeOnly$ = "Y"
End If
GoTo SetupScreen
Case "H", "h"
GoSub Help
Case Else
System
End Select
' Begin breaking down the time and date into individual components
CurrentDate$ = Date$
CurrentTime$ = Time$
Month = Val(Left$(CurrentDate$, 2))
Day = Val(Mid$(CurrentDate$, 4, 3))
Year = Val(Right$(CurrentDate$, 4))
Decade = Val(Right$(CurrentDate$, 2))
Hour = Val(Left$(CurrentTime$, 2))
Minute = Val(Mid$(CurrentTime$, 4, 2))
Second = Val(Right$(CurrentTime$, 2))
Hour = Val(Left$(CurrentTime$, 2))
Minute = Val(Mid$(CurrentTime$, 4, 2))
Second = Val(Right$(CurrentTime$, 2))
' At the end of the loop that displays the time on the screen, we set OldSecond to the current seconds. When we reach
' this point again, if the current seconds are still the same, we skip the display process since there are no changes.
' If the seconds have changed, then proceed with updating the display.
If (OldSecond = Second) Then GoTo DisplayFinished
' Calculate the day of the week
' IMPORTANT: The calculations below are valid through 2099.
' Step 1: Add the day of the month and the number from the month table. We will read the values from the month table.
Temp = Day + MonthTable(Month)
' Step 2: If the number calculated above is greater than 6, then subtract the highest multiple of 7 from this number.
If Temp > 6 Then
Temp2 = Int(Temp / 7)
Temp = Temp - (Temp2 * 7)
End If
Result1 = Temp
' Step 3: From the last two digits of the year, subtract the year that has the highest multiple of 28.
Temp = Decade
If Decade > 27 Then
Temp2 = Int(Temp / 28)
Temp = Decade - (Temp2 * 28)
End If
Result2 = Temp
' Step 4: Take the last 2 digits of the year, divide by 4, and drop anything after the decimal point. Add that value to Result2.
Temp = 0
If Decade > 3 Then
Temp = Int(Decade / 4)
End If
Result3 = Result2 + Temp
' Step 5: If the month is Jan or Feb AND the year is a leap year, subtract 1 from Result3.
If Month < 3 Then
If (Year / 4) = (Int(Year / 4)) Then
LeapYear = 1
Else
LeapYear = 0
End If
Result3 = Result3 - LeapYear
End If
' Step 6: Add Result1 and Result3. Subtract the highest multiple of 7. The result will be 0-6 with 0 being Sat, and 6 being Fri.
Result3 = Result3 + Result1
If Result3 > 6 Then
Temp = Int(Result3 / 7)
Result3 = Result3 - (Temp * 7)
End If
' To make handling easier, we will add 1 to result so that the day of the week will now be a number from 1 to 7. The
' end result is that Sat = 1, Fri = 7.
DayOfWeek = Result3 + 1
' End calculation of the day of the week.
' Set the default color of items printed to the screen to grey on black. Current values will be highlighted.
' Currently, this means white text on a red background, but we intend to allow customization later in a future
' version of the program. For now, we are simply hard coding it.
Locate 1, 1
Color InactiveTextColor, InactiveTextBackgroundColor
' For all the date related entries (month, day, date), display only if ShowTimeOnly$ is set to "N"
If ShowTimeOnly$ = "N" Then
' Print all days of the week
For x = 1 To 7
If x = DayOfWeek Then
Color ActiveTextColor, ActiveTextBackgroundColor: Print DayOfWeekString$(x);: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
Else
Print DayOfWeekString$(x);: GoSub LeftJustify
End If
Next x
End If
' Always print the word "the" in the highlight color
If ShowTimeOnly$ = "N" Then
Color ActiveTextColor, ActiveTextBackgroundColor: Print "the";: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
End If
' Print the day of the month
If ShowTimeOnly$ = "N" Then
For x = 1 To 31
If x = Day Then
Color ActiveTextColor, ActiveTextBackgroundColor: Print DayString$(x);: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
Else
Print DayString$(x);: GoSub LeftJustify
End If
Next x
End If
' Always print the word "of" in the highlight color
If ShowTimeOnly$ = "N" Then
Color ActiveTextColor, ActiveTextBackgroundColor: Print "of";: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
End If
' Print the month
If ShowTimeOnly$ = "N" Then
For x = 1 To 12
If x = Month Then
Color ActiveTextColor, ActiveTextBackgroundColor: Print MonthString$(x);: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
Else
Print MonthString$(x);: GoSub LeftJustify
End If
Next x
End If
' Always print a comma (,) in the highlight color
If ShowTimeOnly$ = "N" Then
' Color ActiveTextColor, ActiveTextBackgroundColor: Print ",";: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
End If
' Print the hour. Hours are numbered from 0 to 23. Since we are using AM and PM we need to manipulate the hours a little bit
' and set an AM / PM flag.
' Set an AM / PM Flag. AM_PM$ will be set to either "AM" or "PM".
Select Case Hour
Case 0 To 11
AM_PM$ = "AM"
Case Else
AM_PM$ = "PM"
End Select
' Convert 24 hour time to AM / PM (12 hour) format
Select Case Hour
Case 0
Hour = Hour + 12
Exit Select
Case 13 To 23
Hour = Hour - 12
Exit Select
End Select
For x = 1 To 12
If x = Hour Then
Color ActiveTextColor, ActiveTextBackgroundColor: Print HourString$(x);: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
Else
Print HourString$(x);: GoSub LeftJustify
End If
Next x
' If minutes are equal to zero, highlight the word "o'clock".
If (Minute = 0) Then
Color ActiveTextColor, ActiveTextBackgroundColor: Print "o'clock";: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
Else
Print "o'clock";: GoSub LeftJustify
End If
' Print the minute. Minutes are numbered from 0 to 59. If seconds are 0, then we highlight the word "precisely",
' otherwise we highlight the word "and" and the appropriate second following the minutes.
For x = 1 To 59
If x = Minute Then
Color ActiveTextColor, ActiveTextBackgroundColor: Print MinuteString$(x);: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
Else
Print MinuteString$(x);: GoSub LeftJustify
End If
Next x
' Print the AM and PM indicators.
Select Case AM_PM$
Case "AM"
Color ActiveTextColor, ActiveTextBackgroundColor: Print "AM";: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify: Print "PM";: GoSub LeftJustify
Case "PM"
Print "AM";: GoSub LeftJustify: Color ActiveTextColor, ActiveTextBackgroundColor: Print "PM";: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
End Select
' If seconds are 0, then highlight the word "precisely", otherwise, highlight the word "and".
Select Case Second
Case 0
Print "and";: GoSub LeftJustify
Color ActiveTextColor, ActiveTextBackgroundColor: Print "precisely";: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
Case Else
Color ActiveTextColor, ActiveTextBackgroundColor: Print "and";: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
Print "precisely";: GoSub LeftJustify
End Select
' Print the second. Seconds are numbered from 0 to 59.
For x = 1 To 59
If Second = x Then
Color ActiveTextColor, ActiveTextBackgroundColor: Print SecondString$(x);: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify
Else
Print SecondString$(x);: GoSub LeftJustify
End If
Next x
' Highlight the word "second" if Second = 1, otherwise highlight "seconds" if Second > 1.
Select Case Second
Case 0
Print "second";: GoSub LeftJustify: Print "seconds";
Case 1
Color ActiveTextColor, ActiveTextBackgroundColor: Print "second";: Color InactiveTextColor, InactiveTextBackgroundColor: GoSub LeftJustify: Print "seconds";
Case Else
Print "second";: GoSub LeftJustify: Color ActiveTextColor, ActiveTextBackgroundColor: Print "seconds";: Color InactiveTextColor, InactiveTextBackgroundColor
End Select
OldSecond = Second
DisplayFinished:
If CurrentMode$ = "FULLSCREEN" Then
CharPerLine = Int(_DesktopWidth / Wide)
Else
CharPerLine = Int(Horizontal / Wide)
End If
Locate MaxLines, (CharPerLine / 2) - 5
If ShowDigitalTime$ = "N" Then
Print " ";
GoTo EndShowDigitalTime
End If
Select Case Hour
Case 0
DigitalHour$ = "12"
Case 1 To 9
DigitalHour$ = "0" + LTrim$(Str$(Hour))
Case 10 To 12
DigitalHour$ = LTrim$(Str$(Hour))
Case 13 To 21
DigitalHour$ = "0" + LTrim$(Str$(Hour - 12))
Case 22, 23
DigitalHour$ = LTrim$(Str$(Hour - 12))
End Select
Color StatusLineTextColor, StatusLineBackgroundColor
Print DigitalHour$; ":"; Mid$(CurrentTime$, 4, 2); ":"; Right$(CurrentTime$, 2);
Color InactiveTextColor, InactiveTextBackgroundColor
Print " ";: Color StatusLineTextColor, StatusLineBackgroundColor: Print AM_PM$;
Color InactiveTextColor, InactiveTextBackgroundColor
EndShowDigitalTime:
Loop
' SUBROUTINES
LeftJustify:
' This routine ensures that spaces are not printed in the first column of a line. This has the effect
' of ensuring that all lines are left justified.
If Pos(0) > 1 Then Print " ";
Return
Help:
' Display help and usage instructions for the program.
_FullScreen _Off
Screen 0
Width 120, 30
Print "This program was inspired by a screen saver authored by Simon Heys many years ago and called Word Clock. To use the"
Print "program effectivly, you should know how about the following items:"
Print
Print "1) The WordClock.ini file"
Print "2) Program hotkeys"
Print "3) Program defaults"
Print
Input "Press <ENTER> to continue...", Temp
Cls
Print "The WordClock.ini File"
Print "-------------------------"
Print
Print "Entries in the WordClock.ini file are not case sensitive. You can use uppercase, lowercase, or mixedcase. Any line"
Print "that starts with a colon (:) as the first character is considered a comment and will be ignored by the program. Any"
Print "line that is blank or has an unrecogognized entry will be treated like a comment and ignored by the program."
Print
Print "Place the WordClock.ini file in the same location as the program. Follow each entry with a colon and a value. The"
Print "next page shows all the valid entries."
Print
Input "Press <ENTER> to continue...", Temp
Cls
Print ": This is a comment - Comments start with a "; Chr$(34); ":"; Chr$(34); " as the first character and are ignored by the program."
Print
Print ": Windowed mode entries"
Print
Print "Font:lucon.ttf - The font to be used in windowed mode. Font name only, no path."
Print "WindowHorizontal:800 - Horizontal resolution (width) used in windowed mode."
Print "WindowVertical:600 - Vertical resolution (height) used in windowed mode."
Print
Print ": Full screen mode entries"
Print
Print "FullscreenFont:lucon.ttf - The font to be used in fullscreen mode."
Print "StartFullscreen:Y - Specify Y to start in fullscreen mode, N to start windowed."
Print
Print ": Color settings - To determine colors for the below options, use the included ColorPicker app."
Print
Print "ActiveTextColor:15"
Print "ActiveTextBackgroundColor:4"
Print "InactiveTextColor:8"
Print "InactiveTextBackgroundColor:0"
Print "StatusLineTextColor:0"
Print "StatusLineBackgroundColor:2"
Print
Print ": Show only the time (no date)"
Print
Print "ShowTimeOnly:N - Specify Y to display only the time in words, N to show the date as well as the time."
Print
Input "Press <ENTER> to continue...", Temp
Cls
Print ": Other entries"
Print
Print "ShowDigitalTime:Y - Display the digital time on the last line of the screen."
Print "HandleErrors:Y - Enables error handling routies. Disable to see original QB64 error message."
Print
Input "Press <ENTER> to continue...", Temp
Cls
Print "Program Hotkeys"
Print "---------------"
Print
Print "Hotkeys (Hotkeys are NOT case sensitive)"
Print
Print "D : Toggles between displaying / not displaying digital time at the bottom of the screen."
Print "F : Toggle in and out of fullscreen mode."
Print "H : Displays help for the program."
Print "S : Display statistics / current values of options."
Print "T : Toggle between time only and time and date in the word display of the time."
Print
Print "Any other Key will exit the program."
Print
Print "Please note that the values shown by the Statistics hotkey are the current values in use in the program. As an example,"
Print "if you have changed the screen size in the windowed mode, the windowed mode width and height will reflect the current"
Print "settings, not the program default settings or the settings you provide in the WordClock.ini file."
Print
Input "Press <ENTER> to continue...", Temp
Cls
Print "Program Defaults"
Print "----------------"
Print
Print "If no WordClock.ini file is present, or for any missing items in that file, the following defaults are used:"
Print
Print "Font:lucon.ttf"
Print "WindowHorizontal:800"
Print "WindowVertical:600"
Print "FullscreenFont:lucon.ttf"
Print "StartFullscreen:Y"
Print "ShowDigitalTime:Y"
Print "ActiveTextBackgroundColor:4"
Print "ActiveTextColor:15"
Print "InactiveTextBackgroundColor:0"
Print "InactiveTextColor:8"
Print "StatusLineBackgroundColor:2"
Print "StatusLineTextColor:0"
Print
Input "Press <ENTER> to continue...", Temp
Cls
' Set the screen back to the mode it was in before we called help.
If CurrentMode$ = "FULLSCREEN" Then
handle& = _NewImage(_DesktopWidth, _DesktopHeight, 256)
Screen handle&
_Delay .5
_FullScreen
Font& = _LoadFont(FullscreenFontPath$, FullscreenFontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(_DesktopHeight / High)
FullscreenFontWidth = _FontWidth
FullscreenFontHeight = _FontHeight
End If
If CurrentMode = "WINDOWED" Then
handle& = _NewImage(Horizontal, Vertical, 256)
Screen handle&
_Delay .5
_FullScreen _Off
Font& = _LoadFont(FontPath$, FontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(Vertical / High)
FontWidth = _FontWidth
FontHeight = _FontHeight
End If
Return
DisplayStats:
' Display current settings being used in the program. This includes fullscreen / windowed height / width, etc.
' Once a user has settings dialed in where they want, this is a helpful way of getting all the values needed
' to plug into the .ini file.
Screen 0
Width 120, 30
_FullScreen Off
_FreeImage handle&
Cls
Print "The values shown below are current values, not program default settings or the settings from the WordClock.ini file."
Print "Note that a value may shows up as "; Chr$(34); "0"; Chr$(34); ", if that mode has not been used yet. For example, windowed font width and height"
Print "may show as zero until you use windowed mode for the first time. Use the WordClock.ini file to alter the default"
Print "behavior of the program."
Print
Print " Windowed Mode Options"
Print "-------------------------------"
Print "Font used in windowed mode: "; FontPath
Print "Font size in windowed mode:"; FontSize
Print "Windowed screen font height:"; FontHeight
Print "Windowed screen font width:"; FontWidth
Print "Windowed mode width:"; Horizontal
Print "Windowed mode height:"; Vertical
Print
Print " Full Screen Mode Options"
Print "-------------------------------"
Print "Font used in fullscreen mode: "; FullscreenFontPath
Print "Font size in fullscreen mode:"; FullscreenFontSize
Print "Full screen font height:"; FullscreenFontHeight
Print "Full screen font width:"; FullscreenFontWidth
Print "Fullscreen width (cannot be changed):"; DeskWidth
Print "Fullscreen height (cannot be changed):"; DeskHeight
Print
Print " Other Options"
Print "-------------------------------"
Print "Show digital time at bottom of screen:"; ShowDigitalTime$
Print "Error handling routines:"; HandleErrors$
Print
Input "Press <ENTER> to continue...", Temp
Cls
' Set the screen back to the mode it was in before we called help.
If CurrentMode$ = "FULLSCREEN" Then
handle& = _NewImage(_DesktopWidth, _DesktopHeight, 256)
Screen handle&
_Delay .5
_FullScreen
Font& = _LoadFont(FullscreenFontPath$, FullscreenFontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(_DesktopHeight / High)
FullscreenFontWidth = _FontWidth
FullscreenFontHeight = _FontHeight
End If
If CurrentMode = "WINDOWED" Then
handle& = _NewImage(Horizontal, Vertical, 256)
Screen handle&
_Delay .5
_FullScreen _Off
Font& = _LoadFont(FontPath$, FontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(Vertical / High)
FontWidth = _FontWidth
FontHeight = _FontHeight
End If
Return
FindLargestFontSize:
GoSub ValidateScreen
' This subroutine will determine what the largest font size is that all allow all text to be displayed on the screen.
' This subroutine will in turn call the subroutine "FontSizeTest".
' We will begin our testing with the currently set font size
Select Case CurrentMode$
Case "FULLSCREEN"
FontSizeToTest = FullscreenFontSize
Case "WINDOWED"
FontSizeToTest = FontSize
End Select
' Start testing font sizes to see if they are too large. We begin by testing one size larger than the initial font size
' specified. Once we encounter a failure then we back off the size until it passes. Once we have a pass we then have the
' largest font size that works. Before testing a font size, load all the text to be displayed into AllText$.
Do
FontSizeToTest = FontSizeToTest + 1
Restore AllText
AllText$ = ""
If ShowTimeOnly$ = "Y" Then
Do
Read TempString$
Loop Until Left$(TempString$, 3) = "May"
End If
Do
Read TempString$
If TempString$ = "EOF" Then Exit Do
AllText$ = AllText$ + TempString$
Loop
GoSub FontSizeTest
Loop Until FontTooLarge$ = "Y"
Do
FontSizeToTest = FontSizeToTest - 1
Restore AllText
AllText$ = ""
If ShowTimeOnly$ = "Y" Then
Do
Read TempString$
Loop Until Left$(TempString$, 3) = "May"
End If
Do
Read TempString$
If TempString$ = "EOF" Then Exit Do
AllText$ = AllText$ + TempString$
Loop
GoSub FontSizeTest
Loop Until FontTooLarge$ = "N"
' We reach this point when the largest font size has been determined.
' Assign this font size to either the FontSize or FullscreenFontSize variable.
Select Case CurrentMode$
Case "FULLSCREEN"
FullscreenFontSize = FontSizeToTest
Case "WINDOWED"
FontSize = FontSizeToTest
End Select
Return
FontSizeTest:
Select Case CurrentMode$
Case "FULLSCREEN"
Font& = _LoadFont(FullscreenFontPath$, FontSizeToTest, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
CharPerLine = Int(_DesktopWidth / Wide)
MaxLines = Int(_DesktopHeight / High)
' We are reserving the last line for use by the Digital Clock option, so we are subtracting 1 line from MaxLines
MaxLines = MaxLines - 1
Case "WINDOWED"
Font& = _LoadFont(FontPath$, FontSizeToTest, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
CharPerLine = Int(Horizontal / Wide)
MaxLines = Int(Vertical / High)
' We are reserving the last line for use by the Digital Clock option, so we are subtracting 1 line from MaxLines
MaxLines = MaxLines - 1
End Select
LineCount = 0 ' Set an initial value before entering the loop
Do
' If AllText$ has a space as the first character, remove it. Since we always left justify the output,
' a space at the beginning of a line is dropped and should not count toward the character limit for a line.
AllText$ = LTrim$(AllText$)
' If AllText$ has zero length after trimming, then font size is not too large and there is nothing
' more to be done so we exit from this test.
If Len(AllText$) = 0 Then
FontTooLarge$ = "N"
Exit Do
End If
' If the length of the AllText$ is greater than the number of characters that we can fit on a line, then
' read the number of characters a line can hold plus one more. By doing this, we can check the last
' character to see if it is a space. If it is a space then the last character on the line is the
' last character of a word. However, if that character is a letter, then we are cutting off a word
' and need to determine where that word started.
If Len(AllText$) > CharPerLine Then
TempString$ = Left$(AllText$, CharPerLine + 1)
If Right$(TempString$, 1) = " " Then
AllText$ = LTrim$(Right$(AllText$, (Len(AllText$) - CharPerLine)))
Else
CharPosition = _InStrRev(TempString$, " ")
TempString$ = Left$(TempString$, CharPosition - 1)
AllText$ = Right$(AllText$, Len(AllText$) - Len(TempString$))
End If
LineCount = LineCount + 1
If LineCount > MaxLines Then
FontTooLarge$ = "Y"
Exit Do
Else
FontTooLarge$ = "N"
_Continue
End If
_Continue
End If
' If the number of characters left in AllText$ is <= to the max length of line, then
' we can increment the LineCount and exit this loop.
If Len(AllText$) <= CharPerLine Then
LineCount = LineCount + 1
If LineCount > MaxLines Then
FontTooLarge$ = "Y"
Exit Do
Else
FontTooLarge$ = "N"
End If
Exit Do
End If
Loop
Return
' Check for invalid screen sizes (smaller than 200 x 200)
ValidateScreen:
AdjustmentsMade$ = "N" ' Set initial value
If Horizontal >= _DesktopWidth Then
Horizontal = _DesktopWidth - 1
AdjustmentsMade$ = "Y"
End If
If Vertical >= _DesktopHeight Then
Vertical = _DesktopHeight - 1
AdjustmentsMade$ = "Y"
End If
If Horizontal < 200 Then
Horizontal = 200
AdjustmentsMade$ = "Y"
End If
If Vertical < 200 Then
Vertical = 200
AdjustmentsMade$ = "Y"
End If
If AdjustmentsMade = "N" Then GoTo EndAdjustments
AdjustScreenSize:
oldimage& = handle&
handle& = _NewImage(Horizontal, Vertical, 256)
Screen handle&
_FullScreen _Off
_FreeImage oldimage&
_Delay .5
GoSub FindLargestFontSize
Font& = _LoadFont(FontPath$, FontSize, "MONOSPACE")
_Font Font&
High = _FontHeight
Wide = _FontWidth
MaxLines = Int(Vertical / High)
FontWidth = _FontWidth
FontHeight = _FontHeight
EndAdjustments:
Return
''''''''''''''''''''''
' End of subroutines '
''''''''''''''''''''''
''''''''''''''''''
' Error Handling '
''''''''''''''''''
HandleErrors:
' At the time of this writing, there are no known errors that need to be handled.
'
' Please note that error handling can be disabled by adding an entry to the WordClock.ini file like this
''
Resume ProgramStart
' End of main program
End
' DATA section
DayOfWeek:
Data "Saturday","Sunday","Monday","Tuesday","Wednesday","Thursday","Friday"
Day:
Data "first","second","third","fourth","fifth","sixth","seventh","eighth","ninth","tenth","eleventh","twelfth","thirteenth"
Data "fourteenth","fifteenth","sixteenth","seventeenth","eighteenth","nineteenth","twentieth","twenty-first","twenty-second"
Data "twenty-third","twenty-fourth","twenty-fifth","twenty-sixth","twenty-seventh","twenty-eighth","twenty-ninth","thirtieth","thirty-first"
Month:
Data "January","February","March","April","May","June","July","August","September","October","November","December"
Hour:
Data "one","two","three","four","five","six","seven","eight","nine","ten","eleven","twelve"
Minute:
Data "oh-one","oh-two","oh-three","oh-four","oh-five","oh-six","oh-seven","oh-eight","oh-nine","ten","eleven","twelve","thirteen"
Data "fourteen","fifteen","sixteen","seventeen","eighteen","nineteen","twenty","twenty-one","twenty-two","twenty-three","twenty-four"
Data "twenty-five","twenty-six","twenty-seven","twenty-eight","twenty-nine","thirty","thirty-one","thirty-two","thirty-three"
Data "thirty-four","thirty-five","thirty-six","thirty-seven","thirty-eight","thirty-nine","forty","forty-one","forty-two","forty-three"
Data "forty-four","forty-five","forty-six","forty-seven","forty-eight","forty-nine","fifty","fifty-one","fifty-two","fifty-three"
Data "fifty-four","fifty-five","fifty-six","fifty-seven","fifty-eight","fifty-nine"
Second:
Data "one","two","three","four","five","six","seven","eight","nine","ten","eleven","twelve","thirteen"
Data "fourteen","fifteen","sixteen","seventeen","eighteen","nineteen","twenty","twenty-one","twenty-two","twenty-three","twenty-four"
Data "twenty-five","twenty-six","twenty-seven","twenty-eight","twenty-nine","thirty","thirty-one","thirty-two","thirty-three"
Data "thirty-four","thirty-five","thirty-six","thirty-seven","thirty-eight","thirty-nine","forty","forty-one","forty-two","forty-three"
Data "forty-four","forty-five","forty-six","forty-seven","forty-eight","forty-nine","fifty","fifty-one","fifty-two","fifty-three"
Data "fifty-four","fifty-five","fifty-six","fifty-seven","fifty-eight","fifty-nine"
MonthTable:
Data 0,3,3,6,1,4,6,2,5,0,3,5
AllText:
Data "Saturday Sunday Monday Tuesday Wednesday Thursday Friday the first second third fourth fifth sixth seventh eighth ninth tenth eleventh "
Data "twelfth thirteenth fourteenth fifteenth sixteenth seventeenth eighteenth nineteenth twentieth twenty-first twenty-second twenty-third "
Data "twenty-fourth twenty-fifth twenty-sixth twenty-seventh twenty-eighth twenty-ninth thirtieth thirty-first of January February March April "
Data "May June July August September October November December , "
Data "one two three four five six seven eight nine ten eleven twelve o'clock oh-one "
Data "oh-two oh-three oh-four oh-five oh-six oh-seven oh-eight oh-nine ten eleven twelve thirteen fourteen fifteen sixteen seventeen eighteen "
Data "nineteen twenty twenty-one twenty-two twenty-three twenty-four twenty-five twenty-six twenty-seven twenty-eight twenty-nine thirty "
Data "thirty-one thirty-two thirty-three thirty-four thirty-five thirty-six thirty-seven thirty-eight thirty-nine forty forty-one forty-two "
Data "forty-three forty-four forty-five forty-six forty-seven forty-eight forty-nine fifty fifty-one fifty-two fifty-three fifty-four "
Data "fifty-five fifty-six fifty-seven fifty-eight fifty-nine AM PM and precisely one two three four five six seven eight nine ten eleven "
Data "twelve thirteen fourteen fifteen sixteen seventeen eighteen nineteen twenty twenty-one twenty-two twenty-three twenty-four twenty-five "
Data "twenty-six twenty-seven twenty-eight twenty-nine thirty thirty-one thirty-two thirty-three thirty-four thirty-five thirty-six "
Data "thirty-seven thirty-eight thirty-nine forty forty-one forty-two forty-three forty-four forty-five forty-six forty-seven forty-eight "
Data "forty-nine fifty fifty-one fifty-two fifty-three fifty-four fifty-five fifty-six fifty-seven fifty-eight fifty-nine second seconds"
Data "EOF"
' End of DATA section
'''''''''''''''''''
' Release History '
'''''''''''''''''''
'
' 1.0.0.5 - May 8, 2022
' First stable build release.
'
' 1.0.0.6 - May 9, 2022
' Added detection for situations where a user might specify a non-existant font in the WordClock.ini file. This can happen if the
' user copies the WordClock.ini file to another system and the font specified does not exist on that system. In that case, the
' program will fall back to the LUCON.TTF font.
'
' In addition, we corrected a situation where the dynamic font sizing for fullscreen mode might use fewer lines of the screen than
' it could. This affected only full screen sizing. This issue has been resolved.
'
' 1.0.0.7 - May 9, 2022
' Because the dynamic font resizing is working so well now, we have removed the commented out sections related to the use of the
' "+" and "-" hotkeys for altering the font size. In addition, all support for specifying the font size in the WordClock.ini
' has been pulled.
'
' 1.0.0.8 - May 10, 2022
' Added the ability to specify colors for the various text elements (inactive text, active text, status bar where digital clock
' is displayed). This is implemented by specifying color values in the WordClock.ini. To aid user in determining what values
' represent a particular color and to see what a particular text color / background color would look like we have created a
' ColorPicker app that is now included with the program.
'
' 1.0.1.9 - May 11, 2022
' No change in functionality, just a cleanup and update of the information displayed by the Help hotkey.
'
' 1.0.2.10 - May 23, 2022
' When the program is started in full screen mode, it can be seen opening in a Window for a brief flash of a moment before
' it expands to full screen. I was aware of this problem before the program was released, but due to a compiler bug, I was
' unable to do anything about it. A new version of the compiler was released that addresses this issue and as a result,
' this minor cosmetic issue is now resolved.
'
' 1.0.3.11 - May 25, 2022
' Resolved an issue where window would not size properly when switching between fullscreen and windowed mode several times.
'
' 1.0.4.12 - January 20, 2023
' Very minor change. In the online help, it is stated "you should know how about the following two items", and then we proceed to
' discuss three items. Corrected this by simply removing the word "two".
'
' 2.0.0.13 - May 31, 2023
' Major new feature - add the ability to press "T" or "t" as a hotkey to toggle the display of time only or time and date in the
' display of words. Updated the parsing of the WordClock.ini file to check for a setting called "ShowTimeOnly". Finally, set a
' default to show both time and date in case the "ShowTimeOnly" option is not present in the WordClock.ini file.