Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ascii ClipDoodle (text screen art)
#10
Updated the apps for hopefully better file reading as per advice from mnrvovrfc above. Folks using a system other than windows may still have to edit their shell commands.

Added the ability to save as a jpeg image thanks to the QB64 PE 3.9 update.

[Image: image.png]


The mainprogram 
Code: (Select All)
'Ascii Clipdoodle  V 0.4
'an ascii doodle pad that opens control panel apps in other window
'
'
'loadtextimage and savetextimage from SMcNeil at  https://qb64phoenix.com/forum/showthread.php?tid=2022
'
'pickclip.exe and colorpick16.exe must be compiled before this program will function properly

Dim Shared reflag
reflag = -1
Dim Shared helpscreen As Long
Dim Shared twd, tht

twd = 80: tht = 25
helpscreen = _NewImage(twd, tht, 0)

Dim Shared mainscreen As Long
mainscreen = _NewImage(80, 25, 0) 'default size text screen. feel free to change it.
Screen mainscreen
_Title "Ascii ClipDoodle"
Cls
'open  cdoodle.tlk
write_msg "ClipDoodleOn"
Sleep 1
'_Clipboard$ = "ClipDoodleOn" ' "clears" clipboard for use
Shell _DontWait "pickclip04.exe" ' Open the pickclip control panel
Shell _DontWait "colorpick1604.exe" ' Open the colorpick16 control panel
_ControlChr Off
AK = 42
Do
    _Limit 100
    Do While _MouseInput 'mouse status changes only
        _Limit 2000
        x = _MouseX
        y = _MouseY
        px = _MouseX: py = _MouseY
        If _MouseButton(1) Then
            _PrintString (x, y), brush$
        End If
    Loop
    kk$ = InKey$
    Select Case kk$
        Case "t", "T" 'type on current line with current color characteristics
            _KeyClear
            Do
                Do
                    _Limit 60
                    tk$ = InKey$
                Loop Until tk$ <> ""
                If tk$ = Chr$(8) Then
                    tk$ = ""
                    px = px - 1
                End If
                If tk$ <> Chr$(13) And tk$ <> "" Then
                    _PrintString (px, py), tk$
                    px = px + 1
                    If px > _Width Then tk$ = Chr$(13) 'exit type input if attempting to type outside screen
                End If
            Loop Until tk$ = Chr$(13)
        Case "S" 'save text screen
            filef = 0
            file$ = _SaveFileDialog$("Save File", "", "*.SAV", "SAved text screen")
            If file$ <> "" Then
                filef = 1
                _MessageBox "Information", "File will be saved to " + file$
            End If
            If filef = 1 Then
                SaveTextImage 0, file$
                _MessageBox "Image SAved", "Text Images SAVED to " + file$
            End If
            filef = 0
        Case "L", "O" 'load text screen
            file$ = _OpenFileDialog$("Open File", "", "*.SAV", "SAVed text screen", -1)
            If file$ <> "" Then
                _MessageBox "Information", "You selected " + file$
                'mainscreen = LoadTextImage(file$)
                Screen LoadTextImage(file$)
                tht = _Height
                twid = _Width
            End If

        Case "C" 'clear screen
            cc = _MessageBox("CLEAR SCREEN", "Are you sure you want to clear the screen? The image will be lost if it has not been saved. ", "yesnocancel", "warning", 0)
            If cc = 1 Then Cls
        Case Chr$(27)
            cc = _MessageBox("QUIT !", "Are you sure you wish to QUIT? The image will be lost if it has not been saved. ", "yesnocancel", "warning", 0)
            If cc = 1 Then Else kk$ = ""

        Case "J" 'save as jpeg
            filef = 0
            file$ = _SaveFileDialog$("Save File", "", "*.JPG", "JPEG Image")
            If file$ <> "" Then
                filef = 1
                _MessageBox "Information", "File will be saved to " + file$
            End If
            If filef = 1 Then
                _SaveImage file$, 0, "JPG"

                _MessageBox "JPEG SAved", "Text Images SAVED to " + file$
            End If
            filef = 0



        Case "R"
            do_resize
        Case "?" 'help
            do_help
    End Select

    ik$ = get_msg$
    If Left$(ik$, 2) = "AC" Then AK = Val(Right$(ik$, Len(ik$) - 2))
    If Left$(ik$, 2) = "CK" Then
        ff$ = " "
        n = 2
        Do
            n = n + 1
            A$ = Mid$(ik$, n, 1)
            If A$ <> "/" Then ff$ = ff$ + A$
        Loop Until A$ = "/"
        bb$ = ""
        Do
            A$ = Mid$(ik$, n, 1)
            If A$ <> "/" Then bb$ = bb$ + A$
            n = n + 1
        Loop Until n > Len(ik$)
        FG = Val(ff$): BG = Val(bb$)
        Color FG, BG
    End If
    brush$ = Chr$(AK)
Loop Until kk$ = Chr$(27)
write_msg "QUITCOLORPICK16"
Sleep 1
write_msg "QUITCLIPPICK"
System
Sub do_help
    ls& = _Dest
    Screen helpscreen
    Cls
    Print "HELP"
    Print "------------------"
    Print "use mouse to draw with ascii characters"
    Print "select character to draw and colors from control panels"
    Print " "
    Print "<ESC> to quit program"
    Print "t,T  -  To type a line of text in colors picked"
    Print
    Print "S    - To Save Screen"
    Print "L,O  - to Load Saved Screen"
    Print "J      -save as jpeg file."
    Print "C    - to clear screen"
    Print
    Print "press any key to continue"
    Sleep
    Screen ls&
End Sub
Sub do_resize
    ls& = _Dest
    Screen helpscreen
    Cls
    Print "Resize"
    Print "------------------"
    Print "Current size "
    Print "width "; twd, "Height "; tht
    Print "Enter new coordinates"
    Input "Width "; twd
    Input "Height"; tht
    _FreeImage ls&

    Screen _NewImage(twd, tht, 0)
End Sub




Function LoadTextImage& (SaveFile As String) 'create and load to a new Screen 0 screen with our saved image
    Dim As Integer Wide, Tall, Flag: Wide = 80: Tall = 25: Flag = 0
    Dim As String ImageData
    Dim As _MEM M
    f = FreeFile
    Open SaveFile For Binary As #f
    compress$ = Space$(LOF(f))
    Get #f, 1, compress$
    Close #f
    temp$ = _Inflate$(compress$)
    Flag = Asc(temp$, 1): p = 2

    If Flag And 1 Then Wide = CVI(Mid$(temp$, p, 2)): p = p + 2
    If Flag And 2 Then Tall = CVI(Mid$(temp$, p, 2)): p = p + 2
    If Flag And 4 Then _Blink On Else _Blink Off
    If Flag And 8 Then _Font Asc(temp$, p): p = p + 1
    ImageData = Mid$(temp$, p)
    TempImage = _NewImage(Wide, Tall, 0)
    M = _MemImage(TempImage): _MemPut M, M.OFFSET, ImageData: _MemFree M
    LoadTextImage = TempImage
End Function

Sub SaveTextImage (ImageHandle As Long, SaveFile As String)
    Dim As Integer Wide, Tall, Flag
    Dim As Long ImageSize
    Dim As String ImageData
    Dim As _MEM M
    If _PixelSize(ImageHandle) <> 0 Then Error 5: Exit Sub 'only text images for this routine

    M = _MemImage(ImageHandle)
    Wide = _Width(ImageHandle): Tall = _Height(ImageHandle)
    temp$ = "0" 'placeholder for our finalized image flag which holds custom information

    If Wide <> 80 Then Flag = Flag + 1: temp$ = temp$ + MKI$(Wide)
    If Tall <> 25 Then Flag = Flag + 2: temp$ = temp$ + MKI$(Tall)
    If _Blink Then Flag = Flag + 4 'Set a flag saying that this image uses _Blink
    Select Case _Font(ImageHandle)
        Case 8: Flag = Flag + 8: temp$ = temp$ + Chr$(8)
        Case 9: Flag = Flag + 8: temp$ = temp$ + Chr$(9)
        Case 14: Flag = Flag + 8: temp$ = temp$ + Chr$(14)
        Case 15: Flag = Flag + 8: temp$ = temp$ + Chr$(15)
        Case 16 '16 needs no flag as it's the default for screen 0
        Case 17: Flag = Flag + 8: temp$ = temp$ + Chr$(17)
        Case Else
            'To be added once we get a _MemFont to retrieve custom font data back from QB64PE
    End Select
    ImageSize = Wide * Tall * 2
    ImageData = Space$(ImageSize): _MemGet M, M.OFFSET, ImageData: _MemFree M
    temp$ = temp$ + ImageData
    Mid$(temp$, 1) = Chr$(Flag) 'replace our placeholder with the proper value of the custom flag
    compress$ = _Deflate$(temp$)
    f = FreeFile
    Open SaveFile For Output As #f: Close #f
    Open SaveFile For Binary As #f: Put #f, 1, compress$: Close #f
End Sub

Sub write_msg (m$)
    Open "cdoodle.tlk" For Output As #11
    Print #11, m$
    Close #11
End Sub
Function get_msg$
    '-----------------------------------------------
    'get intraprogram messages
    '----------------------------------------------
    Open "cdoodle.tlk" For Input As #11
    ' Line Input #11, g$
    If Not EOF(11) Then Line Input #11, g$
    Close #11
    get_msg$ = g$
End Function

the color picker control
Code: (Select All)
'colorpick16  0.4
'
'a color picker for mode 0 screens.
'compile as colorpick1604.exe  or anythign else of course just make sure to use the same name in the main program
'
Screen _NewImage(32, 8, 0)
_ScreenMove 600, 400
_Title "colorpick16"
blinkflag = -1
hflag = -1
FB = 0
BB = 0

print_picker FB, BB
Do
    _Limit 100
    Do While _MouseInput 'mouse status changes only
        x = _MouseX
        y = _MouseY
        If _MouseButton(1) Then
            If y >= 1 And y <= 2 Then
                fk = (y - 1) * 8 + Int(x / 4) + FB
            End If
            Color fk, 0
            If fk = 0 Then Color fk, 8
            _PrintString (12, 4), "    "
            _PrintString (12, 4), Str$(fk)
            If y = 7 Then
                bk = Int(x / 4) + BB
            End If
            Color fk, bk
            _PrintString (12, 5), "    "
            _PrintString (12, 5), Str$(bk)
            ' _Clipboard$ = "CK" + _Trim$(Str$(fk)) + "/" + _Trim$(Str$(bk))
            cmsg$ = "CK" + _Trim$(Str$(fk)) + "/" + _Trim$(Str$(bk))
            write_msg cmsg$
            If x = 31 And y = 4 Then
                blinkflag = blinkflag * -1
                Select Case blinkflag
                    Case -1
                        FB = 0
                        BB = 0
                        print_picker FB, BB

                    Case 1
                        FB = 16
                        BB = 8
                        print_picker FB, BB

                End Select
            End If
        End If
    Loop
    kk$ = InKey$
    Select Case kk$
        Case "B"
            FB = 16
            BB = 8
            print_picker FB, BB
        Case "b"
            FB = 0
            BB = 0
            print_picker FB, BB
        Case Chr$(27)
            cc = _MessageBox("QUIT !", "Are you sure you wish to QUIT? The program will lose functionality. ", "yesnocancel", "warning", 0)
            If cc = 1 Then cc = 1 Else kk$ = ""
    End Select
    '  ccheck$ = _Clipboard$
    ccheck$ = get_msg$
    If ccheck$ = "QUITCOLORPICK16" Then kk$ = "QUITCOLORPICK16"
Loop Until kk$ = Chr$(27) Or kk$ = "QUITCOLORPICK16"
'_Clipboard$ = "pickcolor quit"
write_msg "pickcolor quit"

System
Sub print_picker (f, b)
    For y = 0 To 1
        For x = 0 To 7
            fk = y * 8 + x + f
            p$ = "[  ]"
            a$ = _Trim$(Str$(fk))
            If Len(a$) = 1 Then
                Mid$(p$, 3, 1) = a$
            Else
                Mid$(p$, 2, 2) = a$
            End If
            Color fk, 0
            If fk = 0 Then Color 0, 7
            _PrintString ((x + 1) * 4 - 3, y + 1), p$
        Next
    Next
    _PrintString (31, 4), "B"
    _PrintString (1, 4), "Foreground"
    _PrintString (1, 5), "Background"
    For x = 0 To 7
        bk = x + b
        p$ = "[  ]"
        a$ = _Trim$(Str$(bk))
        If bk < 8 Then Mid$(p$, 3, 1) = a$ Else Mid$(p$, 2, 2) = a$
        Color 0, bk
        If bk = 0 Then Color 15, 0
        _PrintString ((x + 1) * 4 - 3, 7), p$
    Next
    fk = 15: bk = 0
End Sub
Sub write_msg (m$)
    Open "cdoodle.tlk" For Output As #11
    Print #11, m$
    Close #11
End Sub
Function get_msg$
    '-----------------------------------------------
    'get intraprogram messages
    '----------------------------------------------
    Open "cdoodle.tlk" For Input As #11
    ' Line Input #11, g$
    If Not EOF(11) Then Line Input #11, g$
    Close #11
    get_msg$ = g$
End Function

the character picker for the "paintbrush"
Code: (Select All)
'pickclip  v0.4
'complie as pickclip04.exe  or whatever you wish to call it in your main program
'sample of a "control panel" feeding output to the clipboard
Screen _NewImage(33, 20, 0)
_ScreenMove 600, 0
_Title "Pick Clip"
_ControlChr Off
AA = 0
'builds ascii grid
For y = 1 To 16
    For x = 1 To 16
        _PrintString (x * 2, y), Chr$(AA)
        AA = AA + 1
    Next
Next
Do
    _Limit 100
    Do While _MouseInput 'mouse status changes only
        x = _MouseX
        y = _MouseY
        If _MouseButton(1) Then
            x = Int(x / 2)
            AK = (y - 1) * 16 + (x - 1)
            _PrintString (1, 18), "                    "
            If AK > -1 And AK < 256 Then
                pp$ = "Picked ASCII " + Str$(AK) + " : " + Chr$(AK)
                _PrintString (1, 18), pp$
                '_Clipboard$ = "AC" + Str$(AK)
                cmsg$ = "AC" + Str$(AK)
                write_msg cmsg$

            End If
        End If
    Loop
    kk$ = InKey$
    cmsg$ = get_msg$
    ' If _Clipboard$ = "QUITCLIPPICK" Then kk$ = "QUITALL"
    If cmsg$ = "QUITCLIPPICK" Then kk$ = "QUITALL"

Loop Until kk$ = "QUITALL" Or kk$ = "Q"
'_Clipboard$ = "pickclip did quit" 'so QUIT message isn't left in clipboard
write_msg "pickclip did quit"
System
Sub write_msg (m$)
    Open "cdoodle.tlk" For Output As #11
    Print #11, m$
    Close #11
End Sub
Function get_msg$
    '-----------------------------------------------
    'get intraprogram messages
    '----------------------------------------------
    Open "cdoodle.tlk" For Input As #11
    ' Line Input #11, g$
    If Not EOF(11) Then Line Input #11, g$
    Close #11
    get_msg$ = g$
End Function
Reply


Messages In This Thread
RE: Ascii ClipDoodle (text screen art) - by bplus - 10-17-2023, 05:19 PM
RE: Ascii ClipDoodle (text screen art) - by James D Jarvis - 10-19-2023, 08:08 PM



Users browsing this thread: 7 Guest(s)