08-18-2022, 04:17 AM
And now we can run the digits out a bit, thanks to string math...
Pete
Code: (Select All)
$CHECKING:OFF
WIDTH 160, 42
_SCREENMOVE 0, 0
DO
limit&& = 32
'betatest% = -1
IF betatest% THEN loops&& = 29 ELSE loops&& = 99
INPUT "Number: "; x#
IF x# = 0 THEN SYSTEM
IF x# < 0 THEN PRINT "Negatives not allowed. Redo..": _DELAY 3: RUN
oldy$ = ""
x$ = LTRIM$(STR$(x#))
IF INSTR(x$, ".") THEN
decx$ = MID$(x$, 1, INSTR(x$, ".") - 1)
x$ = MID$(x$, 1, INSTR(x$, ".") - 1) + MID$(x$, INSTR(x$, ".") + 1)
IF LEN(x$) = 1 THEN x$ = x$ + "0"
ELSE
decx$ = x$
END IF
j&& = LEN(decx$)
' VAL() okay, one character eval.
IF VAL(RIGHT$(LTRIM$(STR$(j&&)), 1)) / 2 = VAL(RIGHT$(LTRIM$(STR$(j&&)), 1)) \ 2 THEN
i&& = 1 ' Even number length.
ELSE
i&& = 0 ' Odd number length.
END IF
DO
stringmatha$ = z$: stringmathb$ = k$
string_math z$, "-", k$, runningtotal$, terminating_decimal%, limit&&
'''z$ = LTRIM$(STR$(VAL(z$) - k#)) + (MID$(x$, i&&, 2))
z$ = runningtotal$ + (MID$(x$, i&&, 2))
IF LEFT$(z$, 1) = "0" THEN z$ = MID$(z$, 2) ' Remove leading zeros
oldy$ = ""
FOR j&& = 1 TO 10
IF i&& > 1 THEN
'''y$ = LTRIM$(STR$(VAL(sqrt$) * 2)) + LTRIM$(STR$(j&&))
string_math sqrt$, "*", "2", y$, terminating_decimal%, limit&&
y$ = y$ + LTRIM$(STR$(j&&))
ELSE
y$ = LTRIM$(STR$(j&&))
END IF
string_math y$, "*", LTRIM$(STR$(j&&)), runningtotal$, terminating_decimal%, limit&&
string_compare runningtotal$, z$, gl%
IF gl% > -1 THEN
IF gl% = 0 THEN
h% = 0: oldy$ = y$ ' Perfect square division.
ELSE
h% = 1
END IF
string_math oldy$, "*", LTRIM$(STR$(j&& - h%)), runningtotal$, terminating_decimal%, limit&&
IF STRING$(LEN(z$), "0") = z$ AND runningtotal$ = "0" AND i&& >= LEN(decx$) THEN EXIT DO
IF dp&& = 0 THEN ' Limited to && size unless converted to string.
IF i&& >= LEN(decx$) THEN
dp&& = INT(LEN(decx$) / 2 + .5)
IF dp&& = 0 THEN dp&& = -1
END IF
END IF
IF betatest% THEN PRINT "Sqrt "; sqrt$; " * 2 = ";: COLOR 2, 0: PRINT LTRIM$(STR$(VAL(sqrt$) * 2));: COLOR 7, 0: PRINT LTRIM$(STR$(j&& - h%)); " * "; LTRIM$(STR$(j&& - h%)); " ="; VAL(oldy$) * (j&& - h%)
sqrt$ = sqrt$ + LTRIM$(STR$(j&& - h%))
string_math oldy$, "*", LTRIM$(STR$(j&& - h%)), runningtotal$, terminating_decimal%, limit&&
k$ = runningtotal$
IF betatest% THEN PRINT "Remainder "; z$; " minus "; k$; " = ";
EXIT FOR
END IF
oldy$ = y$
NEXT
IF betatest% THEN
string_math stringmatha$, "-", stringmathb$, runningtotal$, terminating_decimal%, limit&&
''PRINT LTRIM$(STR$(VAL(z$) - k#)); " sqrt = "; sqrt$
PRINT runningtotal$; " sqrt = "; sqrt$
END IF
i&& = i&& + 2
IF i&& > loops&& THEN EXIT DO
x$ = x$ + "00"
LOOP
PRINT
IF dp&& THEN
sqrt$ = MID$(sqrt$, 0, dp&& + 1) + "." + MID$(sqrt$, dp&& + 1)
END IF
PRINT "QB64 SQR:"; SQR(x#)
PRINT "Pete SQR: "; sqrt$: _DELAY 1: CLEAR
PRINT
LOOP
SUB string_math (stringmatha$, operator$, stringmathb$, runningtotal$, terminating_decimal%, limit&&)
SELECT CASE operator$
CASE "+", "-"
GOTO string_add_subtract
CASE "*"
GOTO string_multiply
CASE "/"
GOTO string_divide
CASE ELSE
PRINT "Error, no operator selected. operator$ = "; operator$
END SELECT
string_divide:
terminating_decimal% = 0: divsign% = 0: divremainder& = 0: divremainder$ = "": divplace& = 0: divplace2& = 0: quotient$ = "": divcarry& = 0
operationdivision% = -1
divbuffer& = LEN(stringmathb$) - LEN(stringmatha$)
IF divbuffer& < 0 THEN divbuffer& = 0
d2dividend$ = stringmatha$
d1divisor$ = stringmathb$
IF LEFT$(d1divisor$, 1) = "0" AND LEN(d1divisor$) = 1 THEN PRINT "Division by zero not allowed.": divsign% = 0: operationdivision% = 0: EXIT SUB
IF LEFT$(d1divisor$, 1) = "-" THEN divsign% = -1: d1divisor$ = MID$(d1divisor$, 2)
IF LEFT$(d2dividend$, 1) = "-" THEN
IF divsign% THEN
divsign% = 0
ELSE
divsign% = -1
END IF
d2dividend$ = MID$(d2dividend$, 2)
END IF
IF INSTR(d1divisor$, ".") <> 0 THEN
DO UNTIL RIGHT$(d1divisor$, 1) <> "0"
d1divisor$ = MID$(d1divisor$, 1, LEN(d1divisor$) - 1) ' Strip off trailing zeros
LOOP
divplace& = LEN(d1divisor$) - INSTR(d1divisor$, ".")
d1divisor$ = MID$(d1divisor$, 1, INSTR(d1divisor$, ".") - 1) + MID$(d1divisor$, INSTR(d1divisor$, ".") + 1) ' Strip off decimal point.
DO UNTIL LEFT$(d1divisor$, 1) <> "0"
d1divisor$ = MID$(d1divisor$, 2) ' Strip off leading zeros for divisors smaller than .1
LOOP
END IF
IF INSTR(d2dividend$, ".") <> 0 THEN
d2dividend$ = d2dividend$ + STRING$(divplace& - LEN(d2dividend$) - INSTR(d2dividend$, "."), "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
divplace2& = INSTR(d2dividend$, ".")
DO UNTIL RIGHT$(d2dividend$, 1) <> "0"
d2dividend$ = MID$(d2dividend$, 1, LEN(d2dividend$) - 1) ' Strip off trailing zeros
LOOP
d2dividend$ = MID$(d2dividend$, 1, INSTR(d2dividend$, ".") - 1) + MID$(d2dividend$, INSTR(d2dividend$, ".") + 1) ' Strip off decimal point.
ELSE
d2dividend$ = d2dividend$ + STRING$(divplace&, "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
divplace& = 0
END IF
DO
DO
divremainder& = divremainder& + 1: divremainder$ = divremainder$ + MID$(d2dividend$, divremainder&, 1)
IF MID$(d2dividend$, divremainder&, 1) = "" THEN
IF divremainder$ = STRING$(LEN(divremainder$), "0") AND LEN(quotient$) > LEN(d2dividend$) THEN
divflag% = -1
terminating_decimal% = -1
EXIT DO
END IF
divcarry& = divcarry& + 1
IF divcarry& = 1 THEN divplace3& = divremainder& - 1
IF divcarry& > limit&& + 1 + divbuffer& THEN
divflag% = -2: EXIT DO
END IF
divremainder$ = divremainder$ + "0" ' No more digits to bring down.
END IF
IF LEN(divremainder$) > LEN(d1divisor$) OR LEN(divremainder$) = LEN(d1divisor$) AND divremainder$ >= d1divisor$ THEN EXIT DO
quotient$ = quotient$ + "0"
LOOP
IF divflag% THEN divflag% = 0: EXIT DO
FOR div_i% = 9 TO 1 STEP -1
stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
m_product$ = "": GOSUB string_multiply
tempcutd$ = divremainder$ ' divremainder$ can be 00 or other leading zero values.
DO
IF LEN(tempcutd$) = 1 THEN EXIT DO
IF LEFT$(tempcutd$, 1) = "0" THEN
tempcutd$ = MID$(tempcutd$, 2)
ELSE
EXIT DO
END IF
LOOP
IF LEN(tempcutd$) > LEN(m_product$) OR LEN(tempcutd$) = LEN(m_product$) AND m_product$ <= tempcutd$ THEN EXIT FOR
NEXT
quotient$ = quotient$ + LTRIM$(STR$(div_i%))
stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
m_product$ = "": GOSUB string_multiply
operator$ = "-"
stringmatha$ = divremainder$
stringmathb$ = m_product$
GOSUB string_add_subtract
divremainder$ = stringmatha$
operator$ = "/"
LOOP
IF divplace& = 0 AND divplace2& = 0 THEN divplace& = divplace3&
IF divplace2& THEN divplace& = divplace& + divplace2& - 1
IF quotient$ = "" THEN divplace& = 0 ' dividend is zero.
IF divplace& OR divplace2& THEN
quotient$ = MID$(quotient$, 1, divplace&) + "." + MID$(quotient$, divplace& + 1)
DO UNTIL RIGHT$(quotient$, 1) <> "0"
quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off trailing zeros
LOOP
IF RIGHT$(quotient$, 1) = "." THEN quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off abandoned decimal.
END IF
DO UNTIL LEFT$(quotient$, 1) <> "0"
quotient$ = MID$(quotient$, 2) ' Strip off leading zeros
LOOP
IF quotient$ = "" THEN quotient$ = "0": divsign% = 0
operationdivision% = 0
stringmathb$ = quotient$: quotient$ = ""
IF stringmathb$ = "overflow" THEN divsign% = 0: operationdivision% = 0: EXIT SUB
runningtotal$ = stringmathb$: stringmathb$ = ""
IF divsign% THEN runningtotal$ = "-" + runningtotal$
IF stringmathround$ <> "" THEN runningtotal$ = runningtotal$ + stringmathround$
operationdivision% = 0
EXIT SUB
string_multiply:
m_decimal_places& = 0: m_product$ = ""
fac1$ = stringmatha$: fac2$ = stringmathb$ ' Make numbers whole numbers and remove any - sign.
IF LEFT$(fac1$, 1) = "-" THEN fac1$ = MID$(fac1$, 2): m_sign% = -1
IF LEFT$(fac2$, 1) = "-" THEN fac2$ = MID$(fac2$, 2): IF m_sign% THEN m_sign% = 0 ELSE m_sign% = -1
IF INSTR(fac1$, ".") <> 0 THEN m_decimal_places& = LEN(fac1$) - INSTR(fac1$, "."): fac1$ = MID$(fac1$, 1, INSTR(fac1$, ".") - 1) + MID$(fac1$, INSTR(fac1$, ".") + 1)
IF INSTR(fac2$, ".") <> 0 THEN m_decimal_places& = m_decimal_places& + LEN(fac2$) - INSTR(fac2$, "."): fac2$ = MID$(fac2$, 1, INSTR(fac2$, ".") - 1) + MID$(fac2$, INSTR(fac2$, ".") + 1)
FOR m_i& = LEN(fac2$) TO 1 STEP -1 ' Multiply each charater top and bottom.
m_k& = m_l&
m_x2$ = MID$(fac2$, m_i&, 1)
FOR m_j& = LEN(fac1$) TO 1 STEP -1
m_x1$ = MID$(fac1$, m_j&, 1)
IF m_product$ <> "" THEN
m_add$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0")
m_t& = 0: m_xproduct$ = "": m_carry% = 0
DO ' Add multiplied characters together.
m_x3$ = MID$(m_add$, LEN(m_add$) - m_t&, 1)
m_x4$ = MID$(m_product$, LEN(m_product$) - m_t&, 1)
IF m_x3$ = "" AND m_x4$ = "" THEN
IF m_carry% THEN m_xproduct$ = "1" + m_xproduct$
EXIT DO
END IF
m_g% = VAL(m_x3$) + VAL(m_x4$) + m_carry%
IF m_g% >= 10 THEN m_g% = m_g% - 10: m_carry% = 1 ELSE m_carry% = 0
m_xproduct$ = LTRIM$(STR$(m_g%)) + m_xproduct$
m_t& = m_t& + 1
LOOP
m_product$ = m_xproduct$: m_xproduct$ = ""
ELSE
m_product$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0") ' First loop makes variable here.
END IF
m_k& = m_k& + 1 ' Adds trailing zeros multiplication
NEXT
m_l& = m_l& + 1 ' Used to reset value for m_k& adding one trailing zer for each loop.
NEXT
fac1$ = "": fac2$ = "": m_l& = 0: m_k& = 0: m_t& = 0
IF m_decimal_places& > LEN(m_product$) THEN m_product$ = STRING$(m_decimal_places& - LEN(m_product$), "0") + m_product$ ' Add any leading zeros to a decimal. Ex: .02 * .01 is factored as 002. It needs one leading zero before adding the decimal point, .0002.
IF m_decimal_places& AND m_product$ <> "0" THEN ' Replace any decimal point.
m_product$ = MID$(m_product$, 1, LEN(m_product$) - m_decimal_places&) + "." + MID$(m_product$, LEN(m_product$) - m_decimal_places& + 1)
END IF
DO UNTIL LEFT$(m_product$, 1) <> "0" ' Remove leading zeros.
m_product$ = MID$(m_product$, 2)
LOOP
IF m_decimal_places& THEN
DO UNTIL RIGHT$(m_product$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1)
LOOP
END IF
IF m_product$ = "" THEN m_product$ = "0": m_sign% = 0
IF RIGHT$(m_product$, 1) = "." THEN m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1) ' Remove decimal from the end of an integer total.
IF operationdivision% THEN m_sign% = 0: RETURN
stringmathb$ = m_product$: m_product$ = ""
IF stringmathb$ = "overflow" THEN EXIT SUB
runningtotal$ = stringmathb$: stringmathb$ = ""
IF m_sign% THEN runningtotal$ = "-" + runningtotal$: m_sign% = 0
EXIT SUB
string_add_subtract:
IF INSTR(stringmatha$, ".") <> 0 THEN ' Evaluate sum for decimal fraction.
sumplace& = LEN(stringmatha$) - INSTR(stringmatha$, ".")
stringmatha$ = MID$(stringmatha$, 1, INSTR(stringmatha$, ".") - 1) + MID$(stringmatha$, INSTR(stringmatha$, ".") + 1) ' Strip out decimal
END IF
IF INSTR(stringmathb$, ".") <> 0 THEN ' Evaluate number for decimal fraction.
numplace& = LEN(stringmathb$) - INSTR(stringmathb$, ".")
stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1) + MID$(stringmathb$, INSTR(stringmathb$, ".") + 1) ' Strip out decimal
END IF
IF sumplace& > numplace& THEN addsubplace& = sumplace& ELSE addsubplace& = numplace&
IF sumplace& > addsubplace& THEN
stringmatha$ = stringmatha$ + STRING$(sumplace& - addsubplace&, "0")
ELSEIF addsubplace& > sumplace& THEN
stringmatha$ = stringmatha$ + STRING$(addsubplace& - sumplace&, "0")
END IF
IF numplace& > addsubplace& THEN
stringmathb$ = stringmathb$ + STRING$(numplace& - addsubplace&, "0")
ELSEIF addsubplace& > numplace& THEN
stringmathb$ = stringmathb$ + STRING$(addsubplace& - numplace&, "0")
END IF ' END Decimal evaluations.
IF LEFT$(stringmatha$, 1) = "-" THEN sign_input$ = "-" ELSE sign_input$ = "+"
IF LEFT$(stringmathb$, 1) = "-" THEN sign_total$ = "-" ELSE sign_total$ = "+"
addsubsign% = 0
SELECT CASE sign_input$ + operator$ + sign_total$
CASE "+++", "+--"
operator$ = "+"
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
CASE "++-", "+-+"
operator$ = "-"
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
GOSUB string_comp
IF gl% < 0 THEN SWAP stringmatha$, stringmathb$: addsubsign% = -1
CASE "---", "-++"
operator$ = "-"
IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
GOSUB string_comp
IF gl% < 0 THEN SWAP stringmatha$, stringmathb$: addsubsign% = -1
CASE "--+", "-+-"
operator$ = "+"
IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
addsubsign% = -1
END SELECT
IF LEN(stringmatha$) > LEN(stringmathb$) THEN
stringmathb$ = STRING$(LEN(stringmatha$) - LEN(stringmathb$), "0") + stringmathb$
ELSEIF LEN(stringmatha$) < LEN(stringmathb$) THEN
stringmatha$ = STRING$(LEN(stringmathb$) - LEN(stringmatha$), "0") + stringmatha$
END IF
addsubx1$ = ""
SELECT CASE operator$
CASE "+", "="
FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) + VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
IF addsubx1% > 9 THEN addsubx1% = addsubx1% - 10: addsubcarry% = 1 ELSE addsubcarry% = 0
addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
NEXT
IF addsubcarry% THEN addsubx1$ = "1" + addsubx1$: addsubcarry% = 0
GOSUB replace_decimal
CASE "-"
FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) - VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
IF addsubx1% < 0 THEN addsubx1% = addsubx1% + 10: addsubcarry% = -1 ELSE addsubcarry% = 0
addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
NEXT
IF addsubx1$ <> "" AND addsubx1$ <> STRING$(LEN(addsubx1$), "0") THEN GOSUB replace_decimal
DO UNTIL LEFT$(addsubx1$, 1) <> "0" ' Remove leading zeros.
addsubx1$ = MID$(addsubx1$, 2)
LOOP
IF addsubx1$ = "" THEN
addsubx1$ = "0": addsubsign% = 0
ELSE
IF addsubcarry% THEN addsubx1$ = "-" + addsubx1$: addsubcarry% = 0
END IF
END SELECT
IF addsubsign% THEN
IF LEFT$(addsubx1$, 1) = "-" THEN addsubx1$ = MID$(addsubx1$, 2) ELSE addsubx1$ = "-" + addsubx1$
END IF
stringmatha$ = addsubx1$: addsubx1$ = ""
IF operationdivision% THEN RETURN
stringmathb$ = stringmatha$: stringmatha$ = ""
IF LEFT$(stringmathb$, 1) = "-" THEN
stringmathb$ = MID$(stringmathb$, 2)
n2sign$ = "-"
ELSE
n2sign$ = ""
END IF
IF stringmathb$ = "overflow" THEN n2sign$ = "": EXIT SUB
runningtotal$ = n2sign$ + stringmathb$: n2sign$ = ""
EXIT SUB
replace_decimal:
IF addsubplace& THEN
addsubx1$ = STRING$(addsubplace& - LEN(addsubx1$), "0") + addsubx1$
addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - addsubplace&) + "." + MID$(addsubx1$, LEN(addsubx1$) - addsubplace& + 1)
DO UNTIL RIGHT$(addsubx1$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1)
addsubplace& = addsubplace& - 1
LOOP
IF RIGHT$(addsubx1$, 1) = "." THEN addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1) ' Number is now an integer.
END IF
RETURN
string_comp:
DO
REM Remove trailing zeros after a decimal point.
IF INSTR(acomp$, ".") THEN
DO UNTIL RIGHT$(acomp$, 1) <> "0" AND RIGHT$(acomp$, 1) <> "." AND RIGHT$(acomp$, 1) <> "-"
acomp$ = MID$(acomp$, 1, LEN(acomp$) - 1)
LOOP
END IF
IF INSTR(bcomp$, ".") THEN
DO UNTIL RIGHT$(bcomp$, 1) <> "0" AND RIGHT$(bcomp$, 1) <> "." AND RIGHT$(bcomp$, 1) <> "-"
bcomp$ = MID$(bcomp$, 1, LEN(bcomp$) - 1)
LOOP
END IF
IF MID$(acomp$, 1, 2) = "-0" OR acomp$ = "" OR acomp$ = "-" THEN acomp$ = "0"
IF MID$(bcomp$, 1, 2) = "-0" OR bcomp$ = "" OR bcomp$ = "-" THEN bcomp$ = "0"
' A - and +
IF LEFT$(acomp$, 1) = "-" THEN j% = -1
IF LEFT$(bcomp$, 1) = "-" THEN k% = -1
IF k% = 0 AND j% THEN gl% = -1: EXIT DO
IF j% = 0 AND k% THEN gl% = 1: EXIT DO
' A decimal and non-decimal.
j% = INSTR(acomp$, ".")
k% = INSTR(bcomp$, ".")
IF j% = 0 AND k% THEN
IF acomp$ = "0" THEN gl% = -1 ELSE gl% = 1
EXIT DO
END IF
IF k% = 0 AND j% THEN
IF bcomp$ = "0" THEN gl% = 1 ELSE gl% = -1
EXIT DO
END IF
' Both decimals.
IF j% THEN
IF acomp$ > bcomp$ THEN
gl% = 1
ELSEIF acomp$ = bcomp$ THEN gl% = 0
ELSEIF acomp$ < bcomp$ THEN gl% = -1
END IF
EXIT DO
END IF
' Both positive or both negative whole numbers.
SELECT CASE LEN(acomp$)
CASE IS < LEN(bcomp$)
gl% = -1
CASE IS = LEN(bcomp$)
IF acomp$ = bcomp$ THEN
gl% = 0
ELSEIF acomp$ > bcomp$ THEN gl% = 1
ELSEIF acomp$ < bcomp$ THEN gl% = -1
END IF
CASE IS > LEN(bcomp$)
gl% = 1
END SELECT
EXIT DO
LOOP
RETURN
END SUB
SUB string_compare (compa$, compb$, gl%)
DO
REM Remove trailing zeros after a decimal point.
IF INSTR(compa$, ".") THEN
DO UNTIL RIGHT$(compa$, 1) <> "0" AND RIGHT$(compa$, 1) <> "." AND RIGHT$(compa$, 1) <> "-"
compa$ = MID$(compa$, 1, LEN(compa$) - 1)
LOOP
END IF
IF INSTR(compb$, ".") THEN
DO UNTIL RIGHT$(compb$, 1) <> "0" AND RIGHT$(compb$, 1) <> "." AND RIGHT$(compb$, 1) <> "-"
compb$ = MID$(compb$, 1, LEN(compb$) - 1)
LOOP
END IF
IF MID$(compa$, 1, 2) = "-0" OR compa$ = "" OR compa$ = "-" THEN compa$ = "0"
IF MID$(compb$, 1, 2) = "-0" OR compb$ = "" OR compb$ = "-" THEN compb$ = "0"
' A - and +
IF LEFT$(compa$, 1) = "-" THEN j% = -1
IF LEFT$(compb$, 1) = "-" THEN k% = -1
IF k% = 0 AND j% THEN gl% = -1: EXIT DO
IF j% = 0 AND k% THEN gl% = 1: EXIT DO
' A decimal and non-decimal.
j% = INSTR(compa$, ".")
k% = INSTR(compb$, ".")
IF j% = 0 AND k% THEN
IF compa$ = "0" THEN gl% = -1 ELSE gl% = 1
EXIT DO
END IF
IF k% = 0 AND j% THEN
IF compb$ = "0" THEN gl% = 1 ELSE gl% = -1
EXIT DO
END IF
' Both decimals.
IF j% THEN
IF compa$ > compb$ THEN
gl% = 1
ELSEIF compa$ = compb$ THEN gl% = 0
ELSEIF compa$ < compb$ THEN gl% = -1
END IF
EXIT DO
END IF
' Both positive or both negative whole numbers.
SELECT CASE LEN(compa$)
CASE IS < LEN(compb$)
gl% = -1
CASE IS = LEN(compb$)
IF compa$ = compb$ THEN
gl% = 0
ELSEIF compa$ > compb$ THEN gl% = 1
ELSEIF compa$ < compb$ THEN gl% = -1
END IF
CASE IS > LEN(compb$)
gl% = 1
END SELECT
EXIT DO
LOOP
END SUB
Pete