Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Profile Pong Game Development
#1
Ever since I saw Rosy's video at RCBasic (where I lurk) I have been meaning to do a version in QB64.
We all know the Classic Pong and this Perspective is very amusing, to me any way!

Rosy's video, just click into it about halfway through and watch until you get an idea how it should go...
https://www.youtube.com/watch?v=jfod2O5Oq7s

I thought I'd show the evolution of my version of development over last couple of days.

So here, my starter I just get started on images and some basic ball handling:
Code: (Select All)
Option _Explicit
_Title "Profile Pong 0-1" ' b+ 2023-02-01 started inspired by Rosy game at RCBasic

Const Xmax = 1200, Ymax = 700, PaddleR = 30, BallR = 5, TableL = 100, TableR = 1100
Const TableY = Ymax - 80
Const NetY = TableY - 40
Const NetL = 598
Const NetR = 602
Const Gravity = .1
Const BallSpeed = 8

Dim Shared As Long Table, LPaddle, RPaddle ' images

Screen _NewImage(Xmax, Ymax, 32)
_ScreenMove 0, 0 ' <<<<<<< you may want different

Dim As Long mx, my, playerX, playerY, ballX, ballY, computerX, computerY, playerPt, computerPt, flagPt
Dim As Double ballDX, ballDY, a

makeTableImg
makeLeftPaddle
makeRightpaddle
computerX = 50
Do
    flagPt = 0
    ballY = 300: ballX = TableR - BallR: ballDX = .01
    Do
        _PutImage , Table, 0
        _PrintString (100, 100), "Computer:" + Str$(computerPt)
        _PrintString (1100 - _PrintWidth("Player:" + Str$(playerPt)), 100), "Player:" + Str$(playerPt)

        ' player is RPaddle
        10 If _MouseInput Then GoTo 10
        mx = _MouseX: my = _MouseY
        If mx > NetR + PaddleR Then
            If mx > 1100 + PaddleR Then
                playerX = mx: playerY = my
            Else
                If my + PaddleR < TableY Then playerX = mx: playerY = my
            End If
        End If
        _PutImage (playerX - PaddleR, playerY - PaddleR)-Step(PaddleR, 2 * PaddleR), RPaddle, 0

        ' computer opponent
        computerY = ballY + 5
        _PutImage (computerX, computerY - PaddleR)-Step(PaddleR, 2 * PaddleR), LPaddle, 0

        ' ball handling
        ballDY = ballDY + Gravity
        ballX = ballX + ballDX: ballY = ballY + ballDY
        ' collide player
        If Sqr((ballX - playerX) ^ 2 + (ballY - playerY) ^ 2) < (BallR + PaddleR) And ballDX > 0 Then
            a = _Atan2(ballY - playerY, ballX - playerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
        End If
        ' collide computer
        If Sqr((ballX - computerX) ^ 2 + (ballY - computerY) ^ 2) < (BallR + PaddleR) And ballDX < 0 Then
            a = _Atan2(ballY - computerY, ballX - computerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
        End If
        ' collide net
        If ballY + BallR > NetY Then
            If ballDX > 0 Then ' going towards player
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    playerPt = playerPt + 1
                    flagPt = 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                End If
            Else ' going towards computer
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    computerPt = computerPt + 1
                    flagPt = 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                End If
            End If
        End If
        ' collide table
        If ballY + BallR > TableY And ((ballX > TableL) Or (ballX < TableR)) Then
            ballY = TableY - BallR
            ballDY = -ballDY
        End If
        ' collide floor
        If ballY + BallR > Ymax Then
            If ballX + BallR < TableL Then
                playerPt = playerPt + 1
                flagPt = 1
            ElseIf ballX - BallR > TableR Then
                computerPt = computerPt + 1
                flagPt = 1
            End If
        End If
        ' collide left
        If ballX - BallR < 0 Then
            playerPt = playerPt + 1
            flagPt = 1
        ElseIf ballX + BallR > Xmax Then 'collide right
            computerPt = computerPt + 1
            flagPt = 1
        End If

        fcirc ballX, ballY, BallR, &HFFFFFFFF
        _Display
        _Limit 60
    Loop Until flagPt
    _Delay 1
    If computerPt >= 21 Then
        _MessageBox "Sorry,", "The Computer out did you this game."
        computerPt = 0: playerPt = 0
    ElseIf playerPt >= 21 Then
        _MessageBox "Congrats!", "You beat the Computer."
        computerPt = 0: playerPt = 0
    End If
Loop

Sub makeLeftPaddle
    LPaddle = _NewImage(PaddleR, 2 * PaddleR, 32)
    _Dest LPaddle
    fcirc -1, PaddleR, PaddleR, &HFFBB6600
    _Dest 0
End Sub

Sub makeRightpaddle
    RPaddle = _NewImage(PaddleR, 2 * PaddleR, 32)
    _Dest RPaddle
    fcirc PaddleR, PaddleR, PaddleR, &HFFFFAA00
    _Dest 0
End Sub

Sub makeTableImg
    Table = _NewImage(_Width, _Height, 32)
    _Dest Table
    Cls
    Line (TableL, TableY)-(TableR, TableY + 20), &HFF008855, BF
    Line (TableL + 40, TableY + 20)-(TableL + 50, _Height), &HFF444444, BF
    Line (TableR - 50, TableY + 20)-(TableR - 40, _Height), &HFF444444, BF
    Line (NetL, NetY)-(NetR, TableY), &HFF444444, BF
    Line (NetL + 1, NetY)-(NetR - 1, NetY + 20), &HFFFFFFFF, BF
    _Dest 0
End Sub

Sub fcirc (CX As Long, CY As Long, R As Long, C As _Unsigned Long)
    Dim Radius As Long, RadiusError As Long
    Dim X As Long, Y As Long
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub

   
b = b + ...
Reply
#2
I tighten up game to rules of Pong and show code to Johnno because I was curious about RCBasic and Rosy.

Code: (Select All)
Option _Explicit
_Title "Profile Pong 1.1" ' b+ 2023-02-01 started inspired by Rosy game at RCBasic
' 2023-02-02 1.1 fix straight up and down problem that infinitely loops.
' You can hit a ball again so long as the dx is still headed at you or 0.
' To tighten down game to actual Ping Pong Rules added variables TableTouchL and TableTouchR
' Set those to 0 when ball collides with paddle on that side. Check those when scoring points.
' Oh some sound effects would be nice.

'                       Rules of Profile Ping Pong (now in effect):
' On your serve or return you must not bounce again on your side of the table.
' You must bounce on the opponents side unless opponent chooses not to wait for bounce.
' Opponent should not attempt to return a ball clearly not going to hit his side of table,
' to win a point. (Currently this Computer player is obblivious to this rule and saves the
' players butt many a time!)

Const Xmax = 1200, Ymax = 700, PaddleR = 30, BallR = 5, TableL = 100, TableR = 1100
Const TableY = Ymax - 80
Const NetY = TableY - 40
Const NetL = 598
Const NetR = 602
Const Gravity = .1
Const BallSpeed = 8

Dim Shared As Long Table, LPaddle, RPaddle ' images

Screen _NewImage(Xmax, Ymax, 32)
_ScreenMove 0, 0 ' <<<<<<< you may want different

Dim As Long mx, my, playerX, playerY, ballX, ballY, computerX, computerY ' locating
Dim As Long playerPt, computerPt, TableTouchL, TableTouchR ' scoring and scoring helper flags
Dim As Double ballDX, ballDY, a, snd

makeTableImg
makeLeftPaddle
makeRightpaddle
computerX = 50
Do 'resets for serve
    TableTouchL = 0: TableTouchR = 0
    ballY = 300: ballX = TableR - BallR: ballDX = 0: ballDY = 0

    Do
        _PutImage , Table, 0
        _PrintString (100, 100), "Computer:" + Str$(computerPt)
        _PrintString (1100 - _PrintWidth("Player:" + Str$(playerPt)), 100), "Player:" + Str$(playerPt)

        ' player is RPaddle
        10 If _MouseInput Then GoTo 10
        mx = _MouseX: my = _MouseY
        If mx > NetR + PaddleR Then
            If mx > 1100 + PaddleR Then
                playerX = mx: playerY = my
            Else
                If my + PaddleR < TableY Then playerX = mx: playerY = my
            End If
        End If
        _PutImage (playerX - PaddleR, playerY - PaddleR)-Step(PaddleR, 2 * PaddleR), RPaddle, 0

        ' computer opponent
        computerY = ballY + 5
        _PutImage (computerX, computerY - PaddleR)-Step(PaddleR, 2 * PaddleR), LPaddle, 0

        ' ball handling
        ballDY = ballDY + Gravity
        ballX = ballX + ballDX: ballY = ballY + ballDY
        ' collide player
        If Sqr((ballX - playerX) ^ 2 + (ballY - playerY) ^ 2) < (BallR + PaddleR) And ballDX >= 0 Then
            Sound 230, 1
            a = _Atan2(ballY - playerY, ballX - playerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            TableTouchR = 0
        End If
        ' collide computer
        If Sqr((ballX - computerX) ^ 2 + (ballY - computerY) ^ 2) < (BallR + PaddleR) And ballDX <= 0 Then
            Sound 230, 1
            a = _Atan2(ballY - computerY, ballX - computerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            TableTouchL = 0
        End If
        ' collide net
        If ballY + BallR > NetY Then
            If ballDX > 0 Then ' going towards player
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                End If
            ElseIf ballDX < 0 Then ' going towards computer
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                    computerPt = computerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                End If
            End If
        End If
        ' collide table   very import to hit table on opponents side on serve and returns ie after paddleR collides
        If ballY + BallR > TableY And ((ballX > TableL) Or (ballX < TableR)) Then
            Sound 600, .25
            If ballX - BallR < NetL Then
                If TableTouchL = 0 And ballDX > 0 Then
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                Else
                    TableTouchL = TableTouchL + 1
                End If
            ElseIf ballX + BallR > NetR Then
                If TableTouchR = 0 And ballDX < 0 Then
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                    computerPt = computerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                Else
                    TableTouchR = TableTouchR + 1
                End If
            End If
            ballY = TableY - BallR
            ballDY = -ballDY
        End If
        ' collide floor
        If ballY + BallR > Ymax Then
            If ballX + BallR < TableL Then
                If TableTouchL > 0 Then
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                Else
                    computerPt = computerPt + 1
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                End If
            ElseIf ballX - BallR > TableR Then
                If TableTouchR > 0 Then
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                    computerPt = computerPt + 1
                Else
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                End If
            End If
            Exit Do
        End If
        ' collide left
        If ballX - BallR < 0 Then
            If TableTouchL > 0 Then
                For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                playerPt = playerPt + 1
            Else
                For snd = 600 To 400 Step -10: Sound snd, .5: Next
                computerPt = computerPt + 1
            End If
            Exit Do
        ElseIf ballX + BallR > Xmax Then 'collide right
            If TableTouchR > 0 Then
                For snd = 600 To 400 Step -10: Sound snd, .5: Next
                computerPt = computerPt + 1
            Else
                For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                playerPt = playerPt + 1
            End If
            Exit Do
        End If
        fcirc ballX, ballY, BallR, &HFFFFFFFF
        _Display
        _Limit 60
    Loop
    _Delay 1
    If computerPt >= 21 Then
        _MessageBox "Sorry,", "The Computer out did you this game."
        computerPt = 0: playerPt = 0
    ElseIf playerPt >= 21 Then
        _MessageBox "Congrats!", "You beat the Computer."
        computerPt = 0: playerPt = 0
    End If
Loop

Sub makeLeftPaddle
    LPaddle = _NewImage(PaddleR, 2 * PaddleR, 32)
    _Dest LPaddle
    fcirc -1, PaddleR, PaddleR, &HFFBB6600
    _Dest 0
End Sub

Sub makeRightpaddle
    RPaddle = _NewImage(PaddleR, 2 * PaddleR, 32)
    _Dest RPaddle
    fcirc PaddleR, PaddleR, PaddleR, &HFFFFAA00
    _Dest 0
End Sub

Sub makeTableImg
    Table = _NewImage(_Width, _Height, 32)
    _Dest Table
    Cls
    Line (TableL, TableY)-(TableR, TableY + 20), &HFF008855, BF
    Line (TableL + 40, TableY + 20)-(TableL + 50, _Height), &HFF444444, BF
    Line (TableR - 50, TableY + 20)-(TableR - 40, _Height), &HFF444444, BF
    Line (NetL, NetY)-(NetR, TableY), &HFF444444, BF
    Line (NetL + 1, NetY)-(NetR - 1, NetY + 20), &HFFFFFFFF, BF
    _Dest 0
End Sub

Sub fcirc (CX As Long, CY As Long, R As Long, C As _Unsigned Long)
    Dim Radius As Long, RadiusError As Long
    Dim X As Long, Y As Long
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub

Johnno made the usual comments too hard and not Blue LOL so 

version 1-2
Code: (Select All)
Option _Explicit
_Title "Profile Pong 1-2" ' b+ 2023-02-01 started inspired by Rosy game at RCBasic
' 2023-02-02 1.1 fix straight up and down problem that infinitely loops.
' You can hit a ball again so long as the dx is still headed at you or 0.
' To tighten down game to actual Ping Pong Rules added variables TableTouchL and TableTouchR
' Set those to 0 when ball collides with paddle on that side. Check those when scoring points.
' Oh some sound effects would be nice.
'2023-02-02 1-2 Increase paddleR, let paddle go through table 1/2 way, blue background.
' Try nicer font...

'                       Rules of Profile Ping Pong (now in effect):
' On your serve or return you must not bounce again on your side of the table.
' You must bounce on the opponents side unless opponent chooses not to wait for bounce.
' Opponent should not attempt to return a ball clearly not going to hit his side of table,
' to win a point. (Currently this Computer player is obblivious to this rule and saves the
' players butt many a time!)

Const Xmax = 1200, Ymax = 700, PaddleR = 50, BallR = 5, TableL = 100, TableR = 1100
Const TableY = Ymax - 80
Const NetY = TableY - 40
Const NetL = 598
Const NetR = 602
Const Gravity = .1
Const BallSpeed = 8

Dim Shared As Long Table, LPaddle, RPaddle ' images

Screen _NewImage(Xmax, Ymax, 32)
_ScreenMove 0, 0 ' <<<<<<< you may want different
_PrintMode _KeepBackground

Dim As Long f, mx, my, playerX, playerY, ballX, ballY, computerX, computerY ' locating
Dim As Long playerPt, computerPt, TableTouchL, TableTouchR ' scoring and scoring helper flags
Dim As Double ballDX, ballDY, a, snd
f = _LoadFont("Arial.ttf", 32) ' everyone has Arial right?
_Font f

makeTableImg
makeLeftPaddle
makeRightpaddle
computerX = 45
Do 'resets for serve
    TableTouchL = 0: TableTouchR = 0
    ballY = 300: ballX = TableR - BallR: ballDX = 0: ballDY = 0

    Do
        _PutImage , Table, 0
        _PrintString (100, 100), "Computer:" + Str$(computerPt)
        _PrintString (1100 - _PrintWidth("Player:" + Str$(playerPt)), 100), "Player:" + Str$(playerPt)

        ' player is RPaddle
        10 If _MouseInput Then GoTo 10
        mx = _MouseX: my = _MouseY
        If mx > NetR + PaddleR Then
            If mx > TableR + PaddleR Then
                playerX = mx: playerY = my
            Else
                If my < TableY Then playerX = mx: playerY = my
            End If
        End If
        _PutImage (playerX - PaddleR, playerY - PaddleR)-Step(PaddleR, 2 * PaddleR), RPaddle, 0

        ' computer opponent
        computerY = ballY + 5
        _PutImage (computerX, computerY - PaddleR)-Step(PaddleR, 2 * PaddleR), LPaddle, 0

        ' ball handling
        ballDY = ballDY + Gravity
        ballX = ballX + ballDX: ballY = ballY + ballDY
        ' collide player
        If Sqr((ballX - playerX) ^ 2 + (ballY - playerY) ^ 2) < (BallR + PaddleR) And ballDX >= 0 Then
            Sound 230, 1
            a = _Atan2(ballY - playerY, ballX - playerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            TableTouchR = 0
        End If
        ' collide computer
        If Sqr((ballX - computerX) ^ 2 + (ballY - computerY) ^ 2) < (BallR + PaddleR) And ballDX <= 0 Then
            Sound 230, 1
            a = _Atan2(ballY - computerY, ballX - computerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            TableTouchL = 0
        End If
        ' collide net
        If ballY + BallR > NetY Then
            If ballDX > 0 Then ' going towards player
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                End If
            ElseIf ballDX < 0 Then ' going towards computer
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                    computerPt = computerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                End If
            End If
        End If
        ' collide table   very import to hit table on opponents side on serve and returns ie after paddleR collides
        If ballY + BallR > TableY And ((ballX > TableL) Or (ballX < TableR)) Then
            Sound 600, .25
            If ballX - BallR < NetL Then
                If TableTouchL = 0 And ballDX > 0 Then
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                Else
                    TableTouchL = TableTouchL + 1
                End If
            ElseIf ballX + BallR > NetR Then
                If TableTouchR = 0 And ballDX < 0 Then
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                    computerPt = computerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                Else
                    TableTouchR = TableTouchR + 1
                End If
            End If
            ballY = TableY - BallR
            ballDY = -ballDY
        End If
        ' collide floor
        If ballY + BallR > Ymax Then
            If ballX + BallR < TableL Then
                If TableTouchL > 0 Then
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                Else
                    computerPt = computerPt + 1
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                End If
            ElseIf ballX - BallR > TableR Then
                If TableTouchR > 0 Then
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                    computerPt = computerPt + 1
                Else
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                End If
            End If
            Exit Do
        End If
        ' collide left
        If ballX - BallR < 0 Then
            If TableTouchL > 0 Then
                For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                playerPt = playerPt + 1
            Else
                For snd = 600 To 400 Step -10: Sound snd, .5: Next
                computerPt = computerPt + 1
            End If
            Exit Do
        ElseIf ballX + BallR > Xmax Then 'collide right
            If TableTouchR > 0 Then
                For snd = 600 To 400 Step -10: Sound snd, .5: Next
                computerPt = computerPt + 1
            Else
                For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                playerPt = playerPt + 1
            End If
            Exit Do
        End If
        fcirc ballX, ballY, BallR, &HFFFFFFFF
        _Display
        _Limit 60
    Loop
    _Delay 1
    If computerPt >= 21 Then
        _MessageBox "Sorry,", "The Computer out did you this game."
        computerPt = 0: playerPt = 0
    ElseIf playerPt >= 21 Then
        _MessageBox "Congrats!", "You beat the Computer."
        computerPt = 0: playerPt = 0
    End If
Loop

Sub makeLeftPaddle
    LPaddle = _NewImage(PaddleR, 2 * PaddleR, 32)
    _Dest LPaddle
    fcirc -1, PaddleR, PaddleR, &HFFBB6600
    _Dest 0
End Sub

Sub makeRightpaddle
    RPaddle = _NewImage(PaddleR, 2 * PaddleR, 32)
    _Dest RPaddle
    fcirc PaddleR, PaddleR, PaddleR, &HFFFFAA00
    _Dest 0
End Sub

Sub makeTableImg
    Table = _NewImage(_Width, _Height, 32)
    _Dest Table
    Cls , &HFF000088
    Line (TableL, TableY)-(TableR, TableY + 20), &HFF008855, BF
    Line (TableL + 40, TableY + 20)-(TableL + 50, _Height), &HFF444444, BF
    Line (TableR - 50, TableY + 20)-(TableR - 40, _Height), &HFF444444, BF
    Line (NetL, NetY)-(NetR, TableY), &HFF444444, BF
    Line (NetL + 1, NetY)-(NetR - 1, NetY + 20), &HFFFFFFFF, BF
    _Dest 0
End Sub

Sub fcirc (CX As Long, CY As Long, R As Long, C As _Unsigned Long)
    Dim Radius As Long, RadiusError As Long
    Dim X As Long, Y As Long
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub

   
b = b + ...
Reply
#3
I don't like shape of those paddles and think hey this is a call to my Rectircle drawing sub!

Ah but these paddles need different collision detection basically
1. Check collision with straight edge of paddle first, collision Circle to Line Segment code.
Return ball by reversing BallDX
2. & 3. Check collision with top circle of paddle and then bottom circle.
Return ball using the angle the ball is to paddle top or bottom circle.

Version 2-0
Code: (Select All)
Option _Explicit
_Title "Profile Pong 2-0" ' b+ 2023-02-01 started inspired by Rosy game at RCBasic
'2023-02-02 1.1 fix straight up and down problem that infinitely loops.
' You can hit a ball again so long as the dx is still headed at you or 0.
' To tighten down game to actual Ping Pong Rules added variables TableTouchL and TableTouchR
' Set those to 0 when ball collides with paddle on that side. Check those when scoring points.
' Oh some sound effects would be nice.
'2023-02-02 1-2 Increase paddleR, let paddle go through table 1/2 way, blue background.
' Try nicer font...
'2023-02-03 2-0 change shape of paddle and work out collision code circle and line segment,
' collision with offset for ball radius. Add recticle draw sub for new paddle shape.
' Collision with paddle has 3 parts now:
' 1. Collision with straight part of paddle
' 2. Collision with top circle of paddle
' 3. Collision with bottom corcle part of paddle
' PaddleR was decressed since now circle parts of paddle instead of 1/2 circle.
' Now it seems too easy to beat Computer, will take care of that next!
' Clean up comments.

'                       Rules of Profile Ping Pong (now in effect):
' On your serve or return you must clear net and not bounce again on your side of the table.
' Opponent may or may not chooses to wait for bounce.
' Opponent should not attempt to return a ball clearly not going to hit his side of table,
' to win a point. (Currently this Computer player is obblivious to this and saves the
' players butt many a time when ball misses table.)

Const Xmax = 1200, Ymax = 700 '     screen size
Const PaddleR = 30, BallR = 5 '     radii
Const TableL = 100, TableR = 1100 ' table ends
Const TableY = Ymax - 80 '          table height from top screen
Const NetY = TableY - 40 '          net height from top screen
Const NetL = 598 '                  net left side
Const NetR = 602 '                  net right side
Const Gravity = .1 '                just about right drop
Const BallSpeed = 8 '               for ball speed

Dim Shared As Long Table, LPaddle, RPaddle ' images shared so can be made in isolated subs once

Screen _NewImage(Xmax, Ymax, 32)
_ScreenMove 60, 20 '               <<< you may want different, for my screen it is almost middle
_PrintMode _KeepBackground '         usebackground color or image for background of text printed

Dim As Long f, mx, my, playerX, playerY, ballX, ballY, computerX, computerY ' locating
Dim As Long playerPt, computerPt, TableTouchL, TableTouchR ' scoring and scoring helper flags
Dim As Double ballDX, ballDY, a, snd
Dim As Long paddleY1, paddleY2 ' top and bottom line segment ends that are centers of circle
Dim As String s
f = _LoadFont("Arial.ttf", 32) ' everyone has Arial right?
_Font f

makeTableImg
makeLeftPaddle
makeRightpaddle
computerX = 45 ' as of now Computer AI is extremely simple, doesnt ever change x position
Do 'resets for serve
    TableTouchL = 0: TableTouchR = 0
    ballY = 300: ballX = TableR - BallR: ballDX = 0: ballDY = 0
    ' serve follows video of Rosy Demo, just drop ball on human side of table
    Do
        _PutImage , Table, 0 '                                     background table...
        _PrintString (100, 100), "Computer:" + Str$(computerPt) '  score update
        s = "Player:" + Str$(playerPt)
        _PrintString (1100 - _PrintWidth(s), 100), s

        ' player is RPaddle
        While _MouseInput: Wend '                   poll mouse status
        mx = _MouseX: my = _MouseY
        If mx > NetR + PaddleR Then '               keep player on his side of table
            If mx > TableR + PaddleR Then '         past end of table?
                playerX = mx: playerY = my
            Else '                                  allow .5 paddle below table
                If my < TableY Then playerX = mx: playerY = my
            End If
        End If
        _PutImage (playerX - PaddleR, playerY - 1.5 * PaddleR), RPaddle, 0

        ' computer opponent paddle: x is constant behind table edge y adjusted to ballY
        computerY = ballY + .5 * PaddleR + 5 '          so upper round part hits ball upward
        _PutImage (computerX - PaddleR, computerY - 1.5 * PaddleR), LPaddle, 0

        ' ball handling
        ballDY = ballDY + Gravity '                     gravity weighs ball down going up or down
        ballX = ballX + ballDX: ballY = ballY + ballDY

        ' collide player
        ' first check if it hit the flat edge of paddle calc the 2 endpoints of that line
        paddleY1 = playerY - .5 * PaddleR ' paddle top circle origin and line segment end
        paddleY2 = playerY + .5 * PaddleR
        If hitLine(ballX, ballY, BallR, playerX - PaddleR, paddleY1, playerX - PaddleR, paddleY2) Then ' ball hit line part of paddle
            ballDX = -ballDX ' the paddle line is straight up and down so x direction is reversed
            ballX = ballX + 2 * ballDX 'boost away
            TableTouchR = 0

            ' 2nd check if hit top circle of paddle
        ElseIf Sqr((ballX - playerX) ^ 2 + (ballY - paddleY1) ^ 2) < (BallR + PaddleR) And ballDX >= 0 Then
            Sound 230, 1
            a = _Atan2(ballY - paddleY1, ballX - playerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            TableTouchR = 0

            ' 3rd check if hit bottom circle of paddle
        ElseIf Sqr((ballX - playerX) ^ 2 + (ballY - paddleY2) ^ 2) < (BallR + PaddleR) And ballDX >= 0 Then
            a = _Atan2(ballY - paddleY2, ballX - playerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            TableTouchR = 0
        End If

        'collide with computer paddle
        ' first check if it hit the flat edge of paddle calc the 2 endpoints of that line
        paddleY1 = computerY - .5 * PaddleR ' paddle top circle origin and line segment end
        paddleY2 = computerY + .5 * PaddleR
        If hitLine(ballX, ballY, BallR, computerX + PaddleR, paddleY1, computerX + PaddleR, paddleY2) Then ' ball hit line part of paddle
            ballDX = -ballDX ' the paddle line is straight up and down so x direction is reversed
            ballX = ballX + 2 * ballDX 'boost away
            TableTouchL = 0

            ' 2nd check if hit top circle of paddle
        ElseIf Sqr((ballX - computerX) ^ 2 + (ballY - paddleY1) ^ 2) < (BallR + PaddleR) And ballDX <= 0 Then
            Sound 230, 1
            a = _Atan2(ballY - paddleY1, ballX - computerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            TableTouchL = 0

            ' 3rd check if hit bottom circle of paddle
        ElseIf Sqr((ballX - computerX) ^ 2 + (ballY - paddleY2) ^ 2) < (BallR + PaddleR) And ballDX <= 0 Then
            a = _Atan2(ballY - paddleY2, ballX - computerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            TableTouchL = 0
        End If

        ' collide net   vertical part
        If ballY + BallR > NetY Then
            If ballDX > 0 Then ' going towards player
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                End If
            ElseIf ballDX < 0 Then ' going towards computer
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                    computerPt = computerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                End If
            End If
        End If

        ' collide table   very import to hit table on opponents side on serve and returns ie after paddleR collides
        If ballY + BallR > TableY And ((ballX > TableL) Or (ballX < TableR)) Then
            Sound 600, .25
            If ballX - BallR < NetL Then
                If TableTouchL = 0 And ballDX > 0 Then
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                Else
                    TableTouchL = TableTouchL + 1
                End If
            ElseIf ballX + BallR > NetR Then
                If TableTouchR = 0 And ballDX < 0 Then
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                    computerPt = computerPt + 1
                    fcirc ballX, ballY, BallR, &HFFFFFFFF
                    _Display
                    _Delay 1
                    Exit Do
                Else
                    TableTouchR = TableTouchR + 1
                End If
            End If
            ballY = TableY - BallR
            ballDY = -ballDY
        End If

        ' collide floor ?
        If ballY + BallR > Ymax Then
            If ballX + BallR < TableL Then
                If TableTouchL > 0 Then
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                Else
                    computerPt = computerPt + 1
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                End If
            ElseIf ballX - BallR > TableR Then
                If TableTouchR > 0 Then
                    For snd = 600 To 400 Step -10: Sound snd, .5: Next
                    computerPt = computerPt + 1
                Else
                    For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                    playerPt = playerPt + 1
                End If
            End If
            Exit Do
        End If

        ' collide left boundry
        If ballX - BallR < 0 Then
            If TableTouchL > 0 Then
                For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                playerPt = playerPt + 1
            Else
                For snd = 600 To 400 Step -10: Sound snd, .5: Next
                computerPt = computerPt + 1
            End If
            Exit Do
        ElseIf ballX + BallR > Xmax Then 'collide right boundary
            If TableTouchR > 0 Then
                For snd = 600 To 400 Step -10: Sound snd, .5: Next
                computerPt = computerPt + 1
            Else
                For snd = 400 To 600 Step 10: Sound snd, .5: Next ' player pt
                playerPt = playerPt + 1
            End If
            Exit Do
        End If
        fcirc ballX, ballY, BallR, &HFFFFFFFF
        _Display
        _Limit 60
    Loop
    _Delay 1
    If computerPt >= 21 Then
        _MessageBox "Sorry,", "The Computer out did you this game."
        computerPt = 0: playerPt = 0
    ElseIf playerPt >= 21 Then
        _MessageBox "Congrats!", "You beat the Computer."
        computerPt = 0: playerPt = 0
    End If
Loop

' ============================================================================== Code for this app

Sub makeLeftPaddle
    LPaddle = _NewImage(2 * PaddleR, 3 * PaddleR, 32)
    _Dest LPaddle
    Rectircle PaddleR - 1, 1.5 * PaddleR, 2 * PaddleR - 1, 3 * PaddleR - 1, PaddleR, &HFFBB6600, -1
    _Dest 0
End Sub

Sub makeRightpaddle
    RPaddle = _NewImage(2 * PaddleR, 3 * PaddleR, 32)
    _Dest RPaddle
    Rectircle PaddleR - 1, 1.5 * PaddleR, 2 * PaddleR - 1, 3 * PaddleR - 1, PaddleR, &HFFFFAA00, -1
    _Dest 0
End Sub

Sub makeTableImg
    Table = _NewImage(_Width, _Height, 32)
    _Dest Table
    Cls , &HFF000088
    Line (TableL, TableY)-(TableR, TableY + 20), &HFF008855, BF
    Line (TableL + 40, TableY + 20)-(TableL + 50, _Height), &HFF444444, BF
    Line (TableR - 50, TableY + 20)-(TableR - 40, _Height), &HFF444444, BF
    Line (NetL, NetY)-(NetR, TableY), &HFF444444, BF
    Line (NetL + 1, NetY)-(NetR - 1, NetY + 20), &HFFFFFFFF, BF
    _Dest 0
End Sub

' =========================================================================== from my Code Library

Sub fcirc (CX As Long, CY As Long, R As Long, C As _Unsigned Long) ' *** Gold standard for Circle Fill ***
    Dim Radius As Long, RadiusError As Long
    Dim X As Long, Y As Long
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub


' this sub uses Sub arc (x, y, r, raStart, raStop, c As _Unsigned Long) ' this does not check raStart and raStop like arcC does
Sub Rectircle (cx, cy, w, h, r, c As _Unsigned Long, Fill) 'assume default single
    ' a Rectangle with arc circular corners
    ' cx, cy is the middle of the Squircle
    ' w, h = rectangle width and height
    ' r = radius of circular arc (as opposed to elliptical arc
    ' c is color
    'so r needs to be  < .5 * s ie if r = .5 * s then it's just a circle
    'likewise? if r = 0 then just a square
    Dim temp&, xo, yo, p, pd2, p32, xConst, yConst
    Static sd& ' so dont have to free image after each use
    sd& = _Dest ' save dest
    temp& = _NewImage(w + 1, h + 1, 32) ' create a drawing area  side of square
    _Dest temp&
    xo = w / 2: yo = h / 2 ' middles
    p = _Pi: pd2 = p / 2: p32 = p * 3 / 2
    xConst = .5 * (w - 2 * r) ' looks like this is first needed number to get the 4 origins for the arcs from xm y center
    yConst = .5 * (h - 2 * r)
    '4 arcs
    arc xo - xConst, yo - yConst, r, p, p32, c
    arc xo + xConst, yo - yConst, r, p32, 0, c
    arc xo + xConst, yo + yConst, r, 0, pd2, c
    arc xo - xConst, yo + yConst, r, pd2, p, c
    '4 lines
    Line (xo - xConst, yo - yConst - r)-(xo + xConst, yo - yConst - r), c
    Line (xo - xConst, yo + yConst + r)-(xo + xConst, yo + yConst + r), c
    Line (xo - xConst - r, yo - yConst)-(xo - xConst - r, yo + yConst), c
    Line (xo + xConst + r, yo - yConst)-(xo + xConst + r, yo + yConst), c
    If Fill Then Paint (xo, yo), c, c
    _Dest sd&
    _PutImage (cx - xo, cy - yo), temp&, sd&
End Sub

'use radians draw arc from Start to Stop Clockwise
Sub arc (x, y, r, raStart, raStop, c As _Unsigned Long) ' this does not check raStart and raStop like arcC does
    Dim al, a
    'x, y origin, r = radius, c = color

    'raStart is first angle clockwise from due East = 0 degrees
    ' arc will start drawing there and clockwise until raStop angle reached

    If raStop < raStart Then
        arc x, y, r, raStart, _Pi(2), c
        arc x, y, r, 0, raStop, c
    Else
        ' modified to easier way suggested by Steve
        'Why was the line method not good? I forgot.
        al = _Pi * r * r * (raStop - raStart) / _Pi(2)
        For a = raStart To raStop Step 1 / al
            PSet (x + r * Cos(a), y + r * Sin(a)), c
        Next
    End If
End Sub

'from Rain Drain 3 check of hitLine Function
Function hitLine (CircleX, CircleY, CircleR, xx1, yy1, xx2, yy2) ' circle intersect line seg
    Dim x1, y1, x2, y2
    x1 = xx1: y1 = yy1: x2 = xx2: y2 = yy2 ' copy these values so they dont get changed with swap
    If x1 > x2 Then Swap x1, x2: Swap y1, y2
    If CircleX + CircleR < x1 Or CircleX - CircleR > x2 Then hitLine = 0: Exit Function
    If ((y2 - y1) / (x2 - x1)) * (CircleX - x1) + y1 - CircleR < CircleY And CircleY < ((y2 - y1) / (x2 - x1)) * (CircleX - x1) + y1 + CircleR Then
        hitLine = 1
    Else
        hitLine = 0
    End If
End Function

   
b = b + ...
Reply
#4
Version 2-2 some more refinements and fixes:
Code: (Select All)
Option _Explicit
_Title "Profile Pong 2-2" ' b+ 2023-02-01 started inspired by Rosy game at RCBasic
'2023-02-02 1.1 fix straight up and down problem that infinitely loops.
' You can hit a ball again so long as the dx is still headed at you or 0.
' To tighten down game to actual Ping Pong Rules added variables TableTouchL and TableTouchR
' Set those to 0 when ball collides with paddle on that side. Check those when scoring points.
' Oh some sound effects would be nice.
'2023-02-02 1-2 Increase paddleR, let paddle go through table 1/2 way, blue background.
' Try nicer font...
'2023-02-03 2-0 change shape of paddle and work out collision code circle and line segment,
' collision with offset for ball radius. Add recticle draw sub for new paddle shape.
' Collision with paddle has 3 parts now:
' 1. Collision with straight part of paddle
' 2. Collision with top circle of paddle
' 3. Collision with bottom corcle part of paddle
' PaddleR was decressed since now circle parts of paddle instead of 1/2 circle.
' Now it seems too easy to beat Computer, will take care of that next!
' Clean up comments.
'2023-02-03 2-2 OK attempt to make the computer a little harder to beat. ParkCompterY will keep
' computers paddle parked until the ball hits it's side of the table, then it will spring to
' action, so no more freebee points if you hit it out of ball park.
' Fix problem when last player to hit ball hits backwards like in a serve, should lose
' a point not get one! Now checking lastToHit variable and assigned Computer and Player
' Constants. Now a problem when player lobs just past table and hits computer paddle.
' Computer needs to really duck or fly! Fixed after ball crosses net computer stays above it
' until it hits table, then it gets in position to return.

'                       Rules of Profile Ping Pong (now in effect):
' On your serve or return you must clear net and not bounce again on your side of the table.
' Opponent may or may not chooses to wait for bounce.
' Opponent should not attempt to return a ball clearly not going to hit his side of table,
' to win a point. (Currently this Computer player is obblivious to this and saves the
' players butt many a time when ball misses table.)

Const Xmax = 1200, Ymax = 700 '     screen size
Const PaddleR = 30, BallR = 5 '     radii
Const TableL = 100, TableR = 1100 ' table ends
Const TableY = Ymax - 80 '          table height from top screen
Const NetY = TableY - 40 '          net height from top screen
Const NetL = 598 '                  net left side
Const NetR = 602 '                  net right side
Const Gravity = .1 '                just about right drop
Const BallSpeed = 8 '               for ball speed
Const Player = 1 '                  for scoring properly
Const Computer = 2 '                need to know who hit ball last

Dim Shared As Long Table, LPaddle, RPaddle ' images shared so can be made in isolated subs once
Dim Shared ballX, ballY
Screen _NewImage(Xmax, Ymax, 32)
_ScreenMove 60, 20 '               <<< you may want different, for my screen it is almost middle
_PrintMode _KeepBackground '         usebackground color or image for background of text printed

Dim As Long f, mx, my, playerX, playerY, computerX, computerY, parkComputerY ' locating
Dim As Long playerPt, computerPt, tableTouchL, tableTouchR, lastToHit ' scoring and scoring helpers
Dim As Double ballDX, ballDY, a, snd
Dim As Long paddleY1, paddleY2 ' top and bottom line segment ends that are centers of circle
Dim As String s
f = _LoadFont("Arial.ttf", 32) ' everyone has Arial right?
_Font f

makeTableImg
makeLeftPaddle
makeRightpaddle
computerX = TableL - PaddleR - 3 ' as of now Computer doesnt ever change x position

parkComputerY = TableY - 6 * PaddleR

Do 'resets for serve
    tableTouchL = 0: tableTouchR = 0 ' for serving
    computerY = parkComputerY
    ballY = 300: ballX = TableR - BallR
    ballDX = 0: ballDY = 0
    ' serve follows video of Rosy Demo, just drop ball on human side of table
    Do
        _PutImage , Table, 0 '                                     background table...
        _PrintString (100, 100), "Computer:" + Str$(computerPt) '  score update
        s = "Player:" + Str$(playerPt)
        _PrintString (1100 - _PrintWidth(s), 100), s

        '                                                                          Player Paddle
        While _MouseInput: Wend '                   poll mouse status
        mx = _MouseX: my = _MouseY
        If mx > NetR + PaddleR Then '               keep player on his side of table
            If mx > TableR + PaddleR Then '         past end of table?
                playerX = mx: playerY = my
            Else '                                  allow .5 paddle below table
                If my < TableY Then playerX = mx: playerY = my
            End If
        Else
            If my < TableY Then playerY = my ' OK let me move in Y direction
        End If
        _PutImage (playerX - PaddleR, playerY - 1.5 * PaddleR), RPaddle, 0
        makeEyes playerX, playerY

        ' Computer x is constant behind table edge y adjusted to ballY             Computer paddle
        If tableTouchL = 0 Then
            If ballX < NetL Then computerY = ballY - 3 * PaddleR Else computerY = parkComputerY
        Else
            computerY = ballY + .5 * PaddleR + 5 '          so upper round part hits ball upward
        End If
        _PutImage (computerX - PaddleR, computerY - 1.5 * PaddleR), LPaddle, 0
        makeEyes computerX, computerY

        '                                                                            ball handling
        ballDY = ballDY + Gravity '                     gravity weighs ball down going up or down
        ballX = ballX + ballDX: ballY = ballY + ballDY

        ' collide player
        ' first check if it hit the flat edge of paddle calc the 2 endpoints of that line
        paddleY1 = playerY - .5 * PaddleR ' paddle top circle origin and line segment end
        paddleY2 = playerY + .5 * PaddleR
        If hitLine(ballX, ballY, BallR, playerX - PaddleR, paddleY1, playerX - PaddleR, paddleY2)_
         Then

            ballDX = -ballDX ' the paddle line is straight up and down so x direction is reversed
            ballX = ballX + 2 * ballDX 'boost away
            lastToHit = Player
            tableTouchR = 0

            ' 2nd check if hit top circle of paddle
        ElseIf Sqr((ballX - playerX) ^ 2 + (ballY - paddleY1) ^ 2) < (BallR + PaddleR)_
         And ballDX >= 0 Then

            Sound 230, 1
            a = _Atan2(ballY - paddleY1, ballX - playerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            lastToHit = Player
            tableTouchR = 0
            ' 3rd check if hit bottom circle of paddle
        ElseIf Sqr((ballX - playerX) ^ 2 + (ballY - paddleY2) ^ 2) < (BallR + PaddleR)_
         And ballDX >= 0 Then

            a = _Atan2(ballY - paddleY2, ballX - playerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            lastToHit = Player
            tableTouchR = 0
        End If

        'collide with computer paddle
        ' first check if it hit the flat edge of paddle calc the 2 endpoints of that line
        paddleY1 = computerY - .5 * PaddleR ' paddle top circle origin and line segment end
        paddleY2 = computerY + .5 * PaddleR
        If hitLine(ballX, ballY, BallR, computerX + PaddleR, paddleY1, computerX + PaddleR,_
         paddleY2) Then

            ballDX = -ballDX ' the paddle line is straight up and down so x direction is reversed
            ballX = ballX + 2 * ballDX 'boost away
            lastToHit = Computer
            tableTouchL = 0

            ' 2nd check if hit top circle of paddle
        ElseIf Sqr((ballX - computerX) ^ 2 + (ballY - paddleY1) ^ 2) < (BallR + PaddleR) And_
         ballDX <= 0 Then

            Sound 230, 1
            a = _Atan2(ballY - paddleY1, ballX - computerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            lastToHit = Computer
            tableTouchL = 0

            ' 3rd check if hit bottom circle of paddle
        ElseIf Sqr((ballX - computerX) ^ 2 + (ballY - paddleY2) ^ 2) < (BallR + PaddleR) And_
         ballDX <= 0 Then

            a = _Atan2(ballY - paddleY2, ballX - computerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            lastToHit = Computer
            tableTouchL = 0
        End If

        ' collide net   vertical part
        If ballY + BallR > NetY Then
            If ballDX > 0 Then ' going towards player
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    GoSub player
                    Exit Do
                End If
            ElseIf ballDX < 0 Then ' going towards computer
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    GoSub computer
                    Exit Do
                End If
            End If
        End If

        ' collide table   very import to hit table on opponents side on serve and returns
        'If ballY + BallR > TableY And ((ballX > TableL) Or (ballX < TableR)) Then ' why the OR ???
        If (((ballY + BallR) > TableY) And (ballX > TableL)) And (ballX < TableR) Then
            Sound 600, .25
            If (ballX - BallR) < NetL Then
                If tableTouchL = 0 And ballDX > 0 Then
                    GoSub player
                    Exit Do
                Else
                    tableTouchL = tableTouchL + 1
                End If
            ElseIf (ballX - BallR) > NetR Then
                If tableTouchR = 0 And ballDX < 0 Then
                    GoSub computer
                    Exit Do
                Else
                    tableTouchR = tableTouchR + 1
                End If
            End If
            ballY = TableY - BallR
            ballDY = -ballDY
        End If

        ' collide floor ?   I doubt this ever happens
        If ballY + BallR > Ymax Then
            If ballX + BallR < TableL Then
                If (tableTouchL > 0 And lastToHit = Player) Or (lastToHit = Computer) Then
                    GoSub player
                Else
                    GoSub computer
                End If
            ElseIf ballX - BallR > TableR Then
                If (tableTouchR > 0 And lastToHit = Computer) Or (lastToHit = Player) Then
                    GoSub computer
                Else
                    GoSub player
                End If
            End If
            Exit Do
        End If

        ' collide left boundry
        If ballX - BallR < 0 Then
            If (tableTouchL > 0) And (lastToHit = Player) Then
                GoSub player
            ElseIf lastToHit = Computer Then
                GoSub player
            ElseIf ((tableTouchL = 0) And (lastToHit = Player)) Then ' player hit to far
                GoSub computer
            End If
            Exit Do
        ElseIf ballX + BallR > Xmax Then 'collide right boundary
            If (tableTouchR > 0 And lastToHit = Computer) Or (lastToHit = Player) Then
                GoSub computer
            Else ' computer hit too far
                GoSub player
            End If
            Exit Do
        End If
        fcirc ballX, ballY, BallR, &HFFFFFFFF
        _Display
        _Limit 60
    Loop
    _Delay 1
    If computerPt >= 21 Then
        _MessageBox "Sorry,", "The Computer out did you this game."
        computerPt = 0: playerPt = 0
    ElseIf playerPt >= 21 Then
        _MessageBox "Congrats!", "You beat the Computer."
        computerPt = 0: playerPt = 0
    End If
Loop
End

player:
For snd = 400 To 800 Step 20: Sound snd, .5: Next ' player pt
playerPt = playerPt + 1
makeSmile playerX, playerY
makeFrown computerX, computerY
fcirc ballX, ballY, BallR, &HFFFFFFFF
_Display
_Delay 1
Return

computer:
For snd = 800 To 400 Step -20: Sound snd, .5: Next
computerPt = computerPt + 1
makeSmile computerX, computerY
makeFrown playerX, playerY
fcirc ballX, ballY, BallR, &HFFFFFFFF
_Display
_Delay 1
Return

' ============================================================================= Code for this app

Sub makeSmile (x, y)
    arc x, y, 23, _D2R(55), _D2R(125), &HFFFF0000
    arc x, y, 24, _D2R(55), _D2R(125), &HFFFF0000
End Sub

Sub makeFrown (x, y)
    arc x, y + 46, 23, _D2R(240), _D2R(300), &HFFFF0000
    arc x, y + 46, 22, _D2R(240), _D2R(300), &HFFFF0000
End Sub

Sub makeEyes (x, y)
    Dim a
    fcirc x - 10, y, 8, &HFFFFFFFF
    fcirc x + 10, y, 8, &HFFFFFFFF
    a = _Atan2(ballY - y, ballX - (x - 10))
    fcirc x - 10 + 2.5 * Cos(a), y + 2.5 * Sin(a), 3, &HFF000000
    a = _Atan2(ballY - y, ballX - (x + 10))
    fcirc x + 10 + 2.5 * Cos(a), y + 2.5 * Sin(a), 3, &HFF000000
    Line (x - 3, y + 23)-Step(6, 2), &HFFFF0000, BF
End Sub

Sub makeLeftPaddle
    LPaddle = _NewImage(2 * PaddleR, 3 * PaddleR, 32)
    _Dest LPaddle
    Rectircle PaddleR - 1, 1.5 * PaddleR, 2 * PaddleR - 1, 3 * PaddleR - 1, PaddleR, &HFFBB6600, -1
    _Dest 0
End Sub

Sub makeRightpaddle
    RPaddle = _NewImage(2 * PaddleR, 3 * PaddleR, 32)
    _Dest RPaddle
    Rectircle PaddleR - 1, 1.5 * PaddleR, 2 * PaddleR - 1, 3 * PaddleR - 1, PaddleR, &HFFFFAA00, -1
    _Dest 0
End Sub

Sub makeTableImg
    Table = _NewImage(_Width, _Height, 32)
    _Dest Table
    Cls , &HFF000088
    Line (TableL, TableY)-(TableR, TableY + 20), &HFF008855, BF
    Line (TableL + 40, TableY + 20)-(TableL + 50, _Height), &HFF444444, BF
    Line (TableR - 50, TableY + 20)-(TableR - 40, _Height), &HFF444444, BF
    Line (NetL, NetY)-(NetR, TableY), &HFF444444, BF
    Line (NetL + 1, NetY)-(NetR - 1, NetY + 20), &HFFFFFFFF, BF
    _Dest 0
End Sub

' =========================================================================== from my Code Library

Sub fcirc (CX As Long, CY As Long, R As Long, C As _Unsigned Long) ' Gold standard for Circle Fill
    Dim Radius As Long, RadiusError As Long
    Dim X As Long, Y As Long
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub

' this sub uses Sub arc (x, y, r, raStart, raStop, c As _Unsigned Long)
' this does not check raStart and raStop like arcC does
Sub Rectircle (cx, cy, w, h, r, c As _Unsigned Long, Fill) 'assume default single
    ' a Rectangle with arc circular corners
    ' cx, cy is the middle of the Squircle
    ' w, h = rectangle width and height
    ' r = radius of circular arc (as opposed to elliptical arc
    ' c is color
    'so r needs to be  < .5 * s ie if r = .5 * s then it's just a circle
    'likewise? if r = 0 then just a square
    Dim temp&, xo, yo, p, pd2, p32, xConst, yConst
    Static sd& ' so dont have to free image after each use
    sd& = _Dest ' save dest
    temp& = _NewImage(w + 1, h + 1, 32) ' create a drawing area  side of square
    _Dest temp&
    xo = w / 2: yo = h / 2 ' middles
    p = _Pi: pd2 = p / 2: p32 = p * 3 / 2
    xConst = .5 * (w - 2 * r) '             looks like this is first needed number
    yConst = .5 * (h - 2 * r) '             to get the 4 origins for the arcs from xm y center
    '4 arcs
    arc xo - xConst, yo - yConst, r, p, p32, c
    arc xo + xConst, yo - yConst, r, p32, 0, c
    arc xo + xConst, yo + yConst, r, 0, pd2, c
    arc xo - xConst, yo + yConst, r, pd2, p, c
    '4 lines
    Line (xo - xConst, yo - yConst - r)-(xo + xConst, yo - yConst - r), c
    Line (xo - xConst, yo + yConst + r)-(xo + xConst, yo + yConst + r), c
    Line (xo - xConst - r, yo - yConst)-(xo - xConst - r, yo + yConst), c
    Line (xo + xConst + r, yo - yConst)-(xo + xConst + r, yo + yConst), c
    If Fill Then Paint (xo, yo), c, c
    _Dest sd&
    _PutImage (cx - xo, cy - yo), temp&, sd&
End Sub

'use radians draw arc from Start to Stop Clockwise
' this does not check raStart and raStop like arcC does
Sub arc (x, y, r, raStart, raStop, c As _Unsigned Long)
    Dim al, a
    'x, y origin, r = radius, c = color

    'raStart is first angle clockwise from due East = 0 degrees
    ' arc will start drawing there and clockwise until raStop angle reached

    If raStop < raStart Then
        arc x, y, r, raStart, _Pi(2), c
        arc x, y, r, 0, raStop, c
    Else
        ' modified to easier way suggested by Steve
        'Why was the line method not good? I forgot.
        al = _Pi * r * r * (raStop - raStart) / _Pi(2)
        For a = raStart To raStop Step 1 / al
            PSet (x + r * Cos(a), y + r * Sin(a)), c
        Next
    End If
End Sub

'from Rain Drain 3 check of hitLine Function
Function hitLine (CircleX, CircleY, CircleR, xx1, yy1, xx2, yy2) ' circle intersect line seg
    Dim x1, y1, x2, y2
    x1 = xx1: y1 = yy1: x2 = xx2: y2 = yy2 ' copy these values so they dont get changed with swap
    If x1 > x2 Then Swap x1, x2: Swap y1, y2
    If CircleX + CircleR < x1 Or CircleX - CircleR > x2 Then hitLine = 0: Exit Function
    If ((y2 - y1) / (x2 - x1)) * (CircleX - x1) + y1 - CircleR < CircleY And_
     CircleY < ((y2 - y1) / (x2 - x1)) * (CircleX - x1) + y1 + CircleR Then

        hitLine = 1
    Else
        hitLine = 0
    End If
End Function

Oh yeah, PLUS some fun!
   
b = b + ...
Reply
#5
Just fix one little weakness the computer has and it should be more challenging to beat.
I test this idea adding just a couple more lines to Computer Paddle positioning for version 2-3
Code: (Select All)
Option _Explicit
_Title "Profile Pong 2-3" ' b+ 2023-02-01 started inspired by Rosy game at RCBasic
'2023-02-02 1.1 fix straight up and down problem that infinitely loops.
' You can hit a ball again so long as the dx is still headed at you or 0.
' To tighten down game to actual Ping Pong Rules added variables TableTouchL and TableTouchR
' Set those to 0 when ball collides with paddle on that side. Check those when scoring points.
' Oh some sound effects would be nice.
'2023-02-02 1-2 Increase paddleR, let paddle go through table 1/2 way, blue background.
' Try nicer font...
'2023-02-03 2-0 change shape of paddle and work out collision code circle and line segment,
' collision with offset for ball radius. Add recticle draw sub for new paddle shape.
' Collision with paddle has 3 parts now:
' 1. Collision with straight part of paddle
' 2. Collision with top circle of paddle
' 3. Collision with bottom corcle part of paddle
' PaddleR was decressed since now circle parts of paddle instead of 1/2 circle.
' Now it seems too easy to beat Computer, will take care of that next!
' Clean up comments.
'2023-02-03 2-2 OK attempt to make the computer a little harder to beat. ParkCompterY will keep
' computers paddle parked until the ball hits it's side of the table, then it will spring to
' action, so no more freebee points if you hit it out of ball park.
' Fix problem when last player to hit ball hits backwards like in a serve, should lose
' a point not get one! Now checking lastToHit variable and assigned Computer and Player
' Constants. Now a problem when player lobs just past table and hits computer paddle.
' Computer needs to really duck or fly! Fixed after ball crosses net computer stays above it
' until it hits table, then it gets in position to return.
'2023-02-04 2-3 Advancements from here will mostly concern AI today I have 2 Stages to outline:
' 1. Adjust height of Computer paddle to ballY AND distance from table
'    a. When ballY is low to table Computer consistently fails to arc high enough to get over the net.
'    Probably the #1 cause of lost points for computer.
'    b. Maybe there is a height high enough that computer can use flat part of paddle or even the
'       underside
' 2. Summary we save moving ComputerX for Stage 2 and can 'rush' the net.
' Maybe add some sound effects or images if anyone offers sharable items.
' Wouldn't it be interesting to do a ballistics study and plug in results/lessons/foruma for only
' a few new lines for Computer Paddle move. Not needed, it seems.

' WOW I just made one gross adjustment to ComputerY Paddle height according to ball distance to
' table and made this a very hard game for Player to score!

' I am done for now with Profile Pong with this version, 2-3.


'                       Rules of Profile Ping Pong (now in effect):
' On your serve or return you must clear net and not bounce again on your side of the table.
' Opponent may or may not chooses to wait for bounce.
' Opponent should not attempt to return a ball clearly not going to hit his side of table,
' to win a point. Version 2-2 and above AI will not attempt a return until players serve or
' return hits its side of table.

Const Xmax = 1200, Ymax = 700 '     screen size
Const PaddleR = 30, BallR = 5 '     radii
Const TableL = 100, TableR = 1100 ' table ends
Const TableY = Ymax - 80 '          table height from top screen
Const NetY = TableY - 40 '          net height from top screen
Const NetL = 598 '                  net left side
Const NetR = 602 '                  net right side
Const Gravity = .1 '                just about right drop
Const BallSpeed = 8 '               for ball speed
Const Player = 1 '                  for scoring properly
Const Computer = 2 '                need to know who hit ball last

Dim Shared As Long Table, LPaddle, RPaddle ' images shared so can be made in isolated subs once
Dim Shared ballX, ballY
Screen _NewImage(Xmax, Ymax, 32)
_ScreenMove 60, 20 '               <<< you may want different, for my screen it is almost middle
_PrintMode _KeepBackground '         usebackground color or image for background of text printed

Dim As Long f, mx, my, playerX, playerY, computerX, computerY, parkComputerY ' locating
Dim As Long playerPt, computerPt, tableTouchL, tableTouchR, lastToHit ' scoring and scoring helpers
Dim As Double ballDX, ballDY, a, snd
Dim As Long paddleY1, paddleY2 ' top and bottom line segment ends and centers of circle ends
Dim As String s ' score string fitting _printstring command on one line, one call to _PrintWidth
f = _LoadFont("Arial.ttf", 32) ' everyone has Arial right?
_Font f

makeTableImg ' background and table, CLS with it
makeLeftPaddle ' Rectircle!
makeRightpaddle ' Rectircle!

computerX = TableL - PaddleR - 3 ' as of now, ComputerX doesnt ever change x position
parkComputerY = TableY - 6 * PaddleR ' keeping Computer paddle above board out of trouble

Do 'resets for serve
    tableTouchL = 0: tableTouchR = 0 ' for serving
    computerY = parkComputerY
    ballY = 300: ballX = TableR - BallR
    ballDX = 0: ballDY = 0
    ' serve follows video of Rosy Demo, just drop ball on human side of table

    Do
        _PutImage , Table, 0 '                                                 background table...
        _PrintString (100, 100), "Computer:" + Str$(computerPt) '                     score update
        s = "Player:" + Str$(playerPt)
        _PrintString (1100 - _PrintWidth(s), 100), s

        '                                                                            Player Paddle
        While _MouseInput: Wend '                   poll mouse status
        mx = _MouseX: my = _MouseY
        If mx > NetR + PaddleR Then '               keep player on his side of table
            If mx > TableR + PaddleR Then '         past end of table?
                playerX = mx: playerY = my
            Else '                                  allow .5 paddle below table
                If my < TableY Then playerX = mx: playerY = my
            End If
        Else
            If my < TableY Then playerY = my ' OK let me move in Y direction
        End If
        _PutImage (playerX - PaddleR, playerY - 1.5 * PaddleR), RPaddle, 0
        makeEyes playerX, playerY

        ' Computer x is constant behind table edge y adjusted to ballY             Computer Paddle
        If tableTouchL = 0 Then
            If ballX < NetL Then computerY = ballY - 3 * PaddleR Else computerY = parkComputerY
        Else
            'version 2-3  needs to adjust paddle height to ball height from table
            If ballY > NetY - 3 * PaddleR Then
                computerY = ballY + .5 * PaddleR + 20 '    <<<<<<<< version 2-3 new line unbeatable
            Else
                computerY = ballY + .5 * PaddleR + 5 '         so upper round part hits ball upward
            End If
        End If
        _PutImage (computerX - PaddleR, computerY - 1.5 * PaddleR), LPaddle, 0
        makeEyes computerX, computerY

        '                                                                            ball handling
        ballDY = ballDY + Gravity '                     gravity weighs ball down going up or down
        ballX = ballX + ballDX: ballY = ballY + ballDY

        ' collide player
        ' first check if it hit the flat edge of paddle calc the 2 endpoints of that line
        paddleY1 = playerY - .5 * PaddleR ' paddle top circle origin and line segment end
        paddleY2 = playerY + .5 * PaddleR
        If hitLine(ballX, ballY, BallR, playerX - PaddleR, paddleY1, playerX - PaddleR, paddleY2)_
         Then

            ballDX = -ballDX ' the paddle line is straight up and down so x direction is reversed
            ballX = ballX + 2 * ballDX 'boost away
            lastToHit = Player
            tableTouchR = 0

            ' 2nd check if hit top circle of paddle
        ElseIf Sqr((ballX - playerX) ^ 2 + (ballY - paddleY1) ^ 2) < (BallR + PaddleR)_
         And ballDX >= 0 Then

            Sound 230, 1
            a = _Atan2(ballY - paddleY1, ballX - playerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            lastToHit = Player
            tableTouchR = 0
            ' 3rd check if hit bottom circle of paddle
        ElseIf Sqr((ballX - playerX) ^ 2 + (ballY - paddleY2) ^ 2) < (BallR + PaddleR)_
         And ballDX >= 0 Then

            a = _Atan2(ballY - paddleY2, ballX - playerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            lastToHit = Player
            tableTouchR = 0
        End If

        'collide with computer paddle
        ' first check if it hit the flat edge of paddle calc the 2 endpoints of that line
        paddleY1 = computerY - .5 * PaddleR ' paddle top circle origin and line segment end
        paddleY2 = computerY + .5 * PaddleR
        If hitLine(ballX, ballY, BallR, computerX + PaddleR, paddleY1, computerX + PaddleR,_
         paddleY2) Then

            ballDX = -ballDX ' the paddle line is straight up and down so x direction is reversed
            ballX = ballX + 2 * ballDX 'boost away
            lastToHit = Computer
            tableTouchL = 0

            ' 2nd check if hit top circle of paddle
        ElseIf Sqr((ballX - computerX) ^ 2 + (ballY - paddleY1) ^ 2) < (BallR + PaddleR) And_
         ballDX <= 0 Then

            Sound 230, 1
            a = _Atan2(ballY - paddleY1, ballX - computerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            lastToHit = Computer
            tableTouchL = 0

            ' 3rd check if hit bottom circle of paddle
        ElseIf Sqr((ballX - computerX) ^ 2 + (ballY - paddleY2) ^ 2) < (BallR + PaddleR) And_
         ballDX <= 0 Then

            a = _Atan2(ballY - paddleY2, ballX - computerX)
            ballDX = BallSpeed * Cos(a)
            ballDY = BallSpeed * Sin(a)
            ballX = ballX + 2 * ballDX ' boost
            ballY = ballY + 2 * ballDY
            lastToHit = Computer
            tableTouchL = 0
        End If

        ' collide net   vertical part
        If ballY + BallR > NetY Then
            If ballDX > 0 Then ' going towards player
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    GoSub player
                    Exit Do
                End If
            ElseIf ballDX < 0 Then ' going towards computer
                If ballX > NetL - BallR And ballX < NetR + BallR Then ' collide
                    GoSub computer
                    Exit Do
                End If
            End If
        End If

        ' collide table   very import to hit table on opponents side on serve and returns
        'If ballY + BallR > TableY And ((ballX > TableL) Or (ballX < TableR)) Then ' why the OR ???
        If (((ballY + BallR) > TableY) And (ballX > TableL)) And (ballX < TableR) Then
            Sound 600, .25
            If (ballX - BallR) < NetL Then
                If tableTouchL = 0 And ballDX > 0 Then
                    GoSub player
                    Exit Do
                Else
                    tableTouchL = tableTouchL + 1
                End If
            ElseIf (ballX - BallR) > NetR Then
                If tableTouchR = 0 And ballDX < 0 Then
                    GoSub computer
                    Exit Do
                Else
                    tableTouchR = tableTouchR + 1
                End If
            End If
            ballY = TableY - BallR
            ballDY = -ballDY
        End If

        ' collide floor ?   I doubt this ever happens
        If ballY + BallR > Ymax Then
            If ballX + BallR < TableL Then
                If (tableTouchL > 0 And lastToHit = Player) Or (lastToHit = Computer) Then
                    GoSub player
                Else
                    GoSub computer
                End If
            ElseIf ballX - BallR > TableR Then
                If (tableTouchR > 0 And lastToHit = Computer) Or (lastToHit = Player) Then
                    GoSub computer
                Else
                    GoSub player
                End If
            End If
            Exit Do
        End If

        ' collide left boundry
        If ballX - BallR < 0 Then
            If (tableTouchL > 0) And (lastToHit = Player) Then
                GoSub player
            ElseIf lastToHit = Computer Then
                GoSub player
            ElseIf ((tableTouchL = 0) And (lastToHit = Player)) Then ' player hit to far
                GoSub computer
            End If
            Exit Do
        ElseIf ballX + BallR > Xmax Then 'collide right boundary
            If (tableTouchR > 0 And lastToHit = Computer) Or (lastToHit = Player) Then
                GoSub computer
            Else ' computer hit too far
                GoSub player
            End If
            Exit Do
        End If
        fcirc ballX, ballY, BallR, &HFFFFFFFF
        _Display
        _Limit 60
    Loop
    _Delay 1
    If computerPt >= 21 Then
        _MessageBox "Sorry,", "The Computer out did you this game."
        computerPt = 0: playerPt = 0
    ElseIf playerPt >= 21 Then
        _MessageBox "Congrats!", "You beat the Computer."
        computerPt = 0: playerPt = 0
    End If
Loop
End

player:
For snd = 400 To 800 Step 20: Sound snd, .5: Next ' player pt
playerPt = playerPt + 1
makeSmile playerX, playerY
makeFrown computerX, computerY
fcirc ballX, ballY, BallR, &HFFFFFFFF
_Display
_Delay 1
Return

computer:
For snd = 800 To 400 Step -20: Sound snd, .5: Next
computerPt = computerPt + 1
makeSmile computerX, computerY
makeFrown playerX, playerY
fcirc ballX, ballY, BallR, &HFFFFFFFF
_Display
_Delay 1
Return

' ============================================================================= Code for this app

Sub makeSmile (x, y)
    arc x, y, 23, _D2R(55), _D2R(125), &HFFFF0000
    arc x, y, 24, _D2R(55), _D2R(125), &HFFFF0000
End Sub

Sub makeFrown (x, y)
    arc x, y + 46, 23, _D2R(240), _D2R(300), &HFFFF0000
    arc x, y + 46, 22, _D2R(240), _D2R(300), &HFFFF0000
End Sub

Sub makeEyes (x, y)
    Dim a
    fcirc x - 10, y, 8, &HFFFFFFFF
    fcirc x + 10, y, 8, &HFFFFFFFF
    a = _Atan2(ballY - y, ballX - (x - 10))
    fcirc x - 10 + 2.5 * Cos(a), y + 2.5 * Sin(a), 3, &HFF000000
    a = _Atan2(ballY - y, ballX - (x + 10))
    fcirc x + 10 + 2.5 * Cos(a), y + 2.5 * Sin(a), 3, &HFF000000
    Line (x - 3, y + 23)-Step(6, 2), &HFFFF0000, BF
End Sub

Sub makeLeftPaddle
    LPaddle = _NewImage(2 * PaddleR, 3 * PaddleR, 32)
    _Dest LPaddle
    Rectircle PaddleR - 1, 1.5 * PaddleR, 2 * PaddleR - 1, 3 * PaddleR - 1, PaddleR, &HFFBB6600, -1
    _Dest 0
End Sub

Sub makeRightpaddle
    RPaddle = _NewImage(2 * PaddleR, 3 * PaddleR, 32)
    _Dest RPaddle
    Rectircle PaddleR - 1, 1.5 * PaddleR, 2 * PaddleR - 1, 3 * PaddleR - 1, PaddleR, &HFFFFAA00, -1
    _Dest 0
End Sub

Sub makeTableImg
    Table = _NewImage(_Width, _Height, 32)
    _Dest Table
    Cls , &HFF000088
    Line (TableL, TableY)-(TableR, TableY + 20), &HFF008855, BF
    Line (TableL + 40, TableY + 20)-(TableL + 50, _Height), &HFF444444, BF
    Line (TableR - 50, TableY + 20)-(TableR - 40, _Height), &HFF444444, BF
    Line (NetL, NetY)-(NetR, TableY), &HFF444444, BF
    Line (NetL + 1, NetY)-(NetR - 1, NetY + 20), &HFFFFFFFF, BF
    _Dest 0
End Sub

' =========================================================================== from my Code Library

Sub fcirc (CX As Long, CY As Long, R As Long, C As _Unsigned Long) ' Gold standard for Circle Fill
    Dim Radius As Long, RadiusError As Long
    Dim X As Long, Y As Long
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub

' this sub uses Sub arc (x, y, r, raStart, raStop, c As _Unsigned Long)
' this does not check raStart and raStop like arcC does
Sub Rectircle (cx, cy, w, h, r, c As _Unsigned Long, Fill) 'assume default single
    ' a Rectangle with arc circular corners
    ' cx, cy is the middle of the Squircle
    ' w, h = rectangle width and height
    ' r = radius of circular arc (as opposed to elliptical arc
    ' c is color
    'so r needs to be  < .5 * s ie if r = .5 * s then it's just a circle
    'likewise? if r = 0 then just a square
    Dim temp&, xo, yo, p, pd2, p32, xConst, yConst
    Static sd& ' so dont have to free image after each use
    sd& = _Dest ' save dest
    temp& = _NewImage(w + 1, h + 1, 32) ' create a drawing area  side of square
    _Dest temp&
    xo = w / 2: yo = h / 2 ' middles
    p = _Pi: pd2 = p / 2: p32 = p * 3 / 2
    xConst = .5 * (w - 2 * r) '             looks like this is first needed number
    yConst = .5 * (h - 2 * r) '             to get the 4 origins for the arcs from xm y center
    '4 arcs
    arc xo - xConst, yo - yConst, r, p, p32, c
    arc xo + xConst, yo - yConst, r, p32, 0, c
    arc xo + xConst, yo + yConst, r, 0, pd2, c
    arc xo - xConst, yo + yConst, r, pd2, p, c
    '4 lines
    Line (xo - xConst, yo - yConst - r)-(xo + xConst, yo - yConst - r), c
    Line (xo - xConst, yo + yConst + r)-(xo + xConst, yo + yConst + r), c
    Line (xo - xConst - r, yo - yConst)-(xo - xConst - r, yo + yConst), c
    Line (xo + xConst + r, yo - yConst)-(xo + xConst + r, yo + yConst), c
    If Fill Then Paint (xo, yo), c, c
    _Dest sd&
    _PutImage (cx - xo, cy - yo), temp&, sd&
End Sub

'use radians draw arc from Start to Stop Clockwise
' this does not check raStart and raStop like arcC does
Sub arc (x, y, r, raStart, raStop, c As _Unsigned Long)
    Dim al, a
    'x, y origin, r = radius, c = color

    'raStart is first angle clockwise from due East = 0 degrees
    ' arc will start drawing there and clockwise until raStop angle reached

    If raStop < raStart Then
        arc x, y, r, raStart, _Pi(2), c
        arc x, y, r, 0, raStop, c
    Else
        ' modified to easier way suggested by Steve
        'Why was the line method not good? I forgot.
        al = _Pi * r * r * (raStop - raStart) / _Pi(2)
        For a = raStart To raStop Step 1 / al
            PSet (x + r * Cos(a), y + r * Sin(a)), c
        Next
    End If
End Sub

'from Rain Drain 3 check of hitLine Function
Function hitLine (CircleX, CircleY, CircleR, xx1, yy1, xx2, yy2) ' circle intersect line seg
    Dim x1, y1, x2, y2
    x1 = xx1: y1 = yy1: x2 = xx2: y2 = yy2 ' copy these values so they dont get changed with swap
    If x1 > x2 Then Swap x1, x2: Swap y1, y2
    If CircleX + CircleR < x1 Or CircleX - CircleR > x2 Then hitLine = 0: Exit Function
    If ((y2 - y1) / (x2 - x1)) * (CircleX - x1) + y1 - CircleR < CircleY And_
     CircleY < ((y2 - y1) / (x2 - x1)) * (CircleX - x1) + y1 + CircleR Then

        hitLine = 1
    Else
        hitLine = 0
    End If
End Function

And I can't even come close to beating it anymore.

I was all set to work on a ballistic study today, but the one change was it!
I am done for now, LOL
b = b + ...
Reply
#6
The two characters in the game are cute, look like peanuts or rather, like individual members of M&M Peanuts bag. The supermarket near my home has loads of the "family size" bags but I cannot buy it. Last year I became alergic to peanuts. It's a long story so I'm not going to bore anyone else here telling it.
Reply
#7
Or maybe smileys that got squeezed alittle.

I am nicknaming you Brooke, I dislike typing mnrvovrfc, sorry.
b = b + ...
Reply
#8
(02-04-2023, 10:03 PM)bplus Wrote: I am nicknaming you Brooke, I dislike typing mnrvovrfc, sorry.

Shields?
Reply
#9
Fishing streams Smile kinda goes with your latest signature.
b = b + ...
Reply
#10
Rats:

Quote:Legal Service (Ping Pong)
The ball must rest on an open hand palm.
Then it must be tossed up at least 6 inches and struck
so the ball first bounces on the server's side and then
the opponent's side. If the serve is legal except that
it touches the net, it is called a let serve.


Well I must be thinking of tennis. They do call it table tennis after all.
b = b + ...
Reply




Users browsing this thread: 2 Guest(s)