Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Treebeard's String-Math
#1
just for fun I adapted Treebeard's String-Math arithmetic routines +, -, * and / to QB64 https://web.archive.org/web/202002200200...vault.html
Updated to include Sqr, Log, Exp and trig functions
Code: (Select All)
$Console:Only
_Dest _Console

'BIGNUM.BAS v0.n
'Sep-Dec 1996 by Marc Kummel aka Treebeard.
'Contact mkummel@rain.org, http://www.rain.org/~mkummel/
'
' ** site no longer available, use the link below
' https://web.archive.org/web/20200220020034/http://www.rain.org/~mkummel/tbvault.html

'  Conditions:
'-------------

'This program and source code are yours to use and modify as you will, but
'they are offered as freeware with no warranty whatsoever.  Give me credit,
'but do not distribute any changes under my name, or attribute such changes
'to me in any way.  You're on your own!

Const neg$ = "-"
Const negative = -1
Const positive = 1
Const asc0 = 48
Const dp$ = "."
Const zero$ = "0"
Const one$ = "1"
Const two$ = "2"
Const three$ = "3"
Const four$ = "4"
Const five$ = "5"
Const False = 0
Const True = -1
Const basechr = "@"
Const basesep$ = ","
Const maxlongdig = 8
Const emem = 32
Const memget = 0
Const memput = 1
Const defaultdigits = 30
Const maxmem = 35
Const maxstack = 10
Const minconst = 30
Const maxconst = 35
Const pimem = 30
Const pi2mem = 31
Const phimem = 33
Const ln10mem = 34
Const ln2mem = 35
Const memclr = 2

'useful shared stuff, initialize these in bInit()
Dim Shared errormsg$, abortmsg$, Error$, bmem$(maxmem), out$
Dim Shared zmem$(maxstack), cname$(maxconst)
Dim Shared bncpath$, prmcntfile$
Dim Shared digits%, zstack%

'Prime count table data
Dim maxprmcnt%
Dim prmcnt&
'======================================
Dim n As String
Dim m As String
Dim c As String
digits% = 35
bInit
n = "7." + String$(digits% - 1, "7")
m = "9." + String$(digits% - 1, "9")
c = ""
bAdd (n), (m), c
Print "n + m = "; c
bSub (n), (m), c
Print "n - m = "; c
bMul (n), (m), c
Print "n * m = "; c
bDiv (n), (m), c
Print "n / m = "; c
bSqr "2", c
Print "Sqr(2) = "; c
bLn "2", c
Print "Ln(2) = "; c
bLog "2", "10", c
Print "Log10(2) = "; c
bSin "1", c
Print "Sin(1) = "; c
bCos "1", c
Print "Cos(1) = "; c
bTan "1", c
Print "Tan(1) = "; c
'======================================
' BNCxx.BAS
' BNC math module
' 1997 by Marc Kummel aka Treebeard.
' Contact mkummel@rain.org, http://www.rain.org/~mkummel/

's = |s|
'
Sub bAbs (s$)
    If Left$(s$, 1) = neg$ Then s$ = Mid$(s$, 2)
End Sub

'out = s1 + s2
'
Sub bAdd (s1$, s2$, out$)
    Dim last1%, dp1%, sign1%, last2%, dp2%, sign2%
    Dim last%, d1%, d2%, dpt%, carry%
    Dim i%, n%

    'strip the numbers
    bStripDp s1$, last1%, dp1%, sign1%
    bStripDp s2$, last2%, dp2%, sign2%

    'treat different signs as subtraction and exit
    If sign1% = negative And sign2% = positive Then
        bSub s2$, s1$, out$
        bNeg s1$
        Exit Sub
    ElseIf sign1% = positive And sign2% = negative Then
        bSub s1$, s2$, out$
        bNeg s2$
        Exit Sub
    End If

    'align the decimal points and digit pointers
    last% = bMaxInt%(last1% - dp1%, last2% - dp2%)
    d1% = last% + dp1%
    d2% = last% + dp2%
    dpt% = bMaxInt%(dp1%, dp2%)
    last% = dpt% + last%
    out$ = Space$(last%)
    carry% = 0

    'do the addition right to left
    For i% = last% To 1 Step -1
        If i% <> dpt% Then
            n% = carry%
            If d1% > 0 Then n% = n% + Val(Mid$(s1$, d1%, 1))
            If d2% > 0 Then n% = n% + Val(Mid$(s2$, d2%, 1))
            carry% = n% \ 10
            Mid$(out$, i%, 1) = Chr$(asc0 + (n% Mod 10))
        Else
            Mid$(out$, i%, 1) = dp$
        End If
        d1% = d1% - 1
        d2% = d2% - 1
    Next i%
    If carry% Then out$ = one$ + out$

    'clean up
    If sign1% = negative Then s1$ = neg$ + s1$: s2$ = neg$ + s2$: out$ = neg$ + out$
    bClean s1$
    bClean s2$
    bClean out$
End Sub

'out = arccos(s)
'
Sub bArcCos (s$, out$)
    Dim t$, t2$

    '             pi
    ' Arccos(x) = -- - Arcsin(x)
    '              2

    bPi t$
    t2$ = t$
    bDiv t2$, two$, t$
    bArcSin s$, out$
    If out$ <> Error$ Then bSub t$, (out$), out$

End Sub

'out = arccosh(s)
'
Sub bArcCosh (s$, out$)
    'acosh(x) = Log(x + Sqr(x * x - 1))
    out$ = zero$
End Sub

'out =arccot(s)
'
Sub bArcCot (s$, out$)
    'acot(x) = Atn(x) + pi / 2
    out$ = zero$
End Sub

'out =arccoth(s)
'
Sub bArcCoth (s$, out$)
    'acoth(x) = Log((x + 1) / (x - 1)) / 2
    out$ = zero$
End Sub

'out = arccsc(s)
'
Sub bArcCsc (s$, out$)
    'acsc(x) = Atn(x / Sqr(x * x - 1)) + (Sgn(x) - 1) * pi / 2
    out$ = zero$
End Sub

'out = arccsch(s)
'
Sub bArcCsch (s$, out$)
    'acsch(x) = Log((Sgn(x) * Sqr(x * x + 1) + 1) / x)
    out$ = zero$
End Sub

'out = arcsec(s)
'
Sub bArcSec (s$, out$)
    'asec(x) = Atn(x / Sqr(x * x - 1)) + Sgn(Sgn(x) - 1) * pi / 2
    out$ = zero$
End Sub

'out = arcsech(s)
'
Sub bArcSech (s$, out$)
    'asech(x) = Log(Sqr((-x * x + 1) + 1) / x)
    out$ = zero$
End Sub

'out = arcsin(s)
'
Sub bArcSin (s$, out$)
    Dim t$, t2$

    '                       x
    ' Arcsin(x) = Arctan --------
    '                    û(1-x^2)
    t2$ = s$
    bMul t2$, s$, t$
    bTrimDig t$
    t2$ = t$
    bSub one$, t2$, t$
    If bIsNeg%(t$) Then
        out$ = Error$
    ElseIf bIsZero%(t$) Then
        bPi out$
        t2$ = out$
        bDiv t2$, two$, out$
    Else
        t2$ = t$
        bSqr t2$, t$
        t2$ = t$
        bDiv s$, t2$, t$
        bTrimDig t$
        bArcTan t$, out$
    End If
End Sub

'out = arcsinh(s)
'
Sub bArcSinh (s$, out$)
    'asinh(x) = Log(x + Sqr(x * x + 1))
    out$ = zero$
End Sub

'out = arctan(s)
'
Sub bArcTan (s$, out$)
    Dim t$, tfac$, fac$, d$, z$
    Dim olddigits%, flag%

    olddigits% = digits%
    digits% = digits% + 5
    t$ = s$: bAbs t$
    If bIsMore%(t$, one$) Then GoSub aTan2 Else GoSub aTan1
    digits% = olddigits%
    bTrimDig out$
    Exit Sub

    'both routines are slow when |x|=1!

    'for -1 < x < 1
    '                x^3   x^5   x^7
    'arctan(x) = x - --- + --- - --- + ...
    '                 3     5     7
    aTan1:
    t$ = s$
    z$ = t$
    bMul z$, t$, tfac$
    bTrimDig tfac$
    out$ = t$
    fac$ = three$
    flag% = False

    Do
        z$ = t$
        bMul z$, tfac$, t$
        bTrimDig t$
        bDiv t$, fac$, d$
        bTrimDig d$
        If bIsZero%(d$) Then Exit Do
        If flag% Then
            z$ = out$
            bAdd z$, d$, out$
        Else
            z$ = out$
            bSub z$, d$, out$
        End If
        flag% = Not flag%
        bInc fac$, 2
    Loop

    Return

    'x < -1 or x > 1
    '                  ã   1    1      1      1
    'arctan(x) = (+/-) - - - + ---- - ---- + ---- - ...
    '                  2   x   3x^3   5x^5   7x^7
    aTan2:
    t$ = s$
    z$ = t$
    bMul z$, t$, tfac$
    bTrimDig tfac$
    out$ = t$
    bInv out$
    bNeg out$
    fac$ = three$
    flag% = True
    Do
        z$ = t$
        bMul z$, tfac$, t$
        bTrimDig t$
        bMul t$, fac$, d$
        bTrimDig d$
        bInv d$
        bTrimDig d$
        If bIsZero%(d$) Then Exit Do
        If flag% Then
            z$ = out$
            bAdd z$, d$, out$
        Else
            z$ = out$
            bSub z$, d$, out$
        End If
        flag% = Not flag%
        bInc fac$, 2
    Loop

    digits% = olddigits%
    bPi t$
    z$ = t$
    bDiv z$, two$, t$
    If bIsNeg%(s$) Then bNeg t$
    z$ = out$
    bAdd z$, t$, out$
    Return

End Sub

'out = arctanh(s)
'
Sub bArcTanh (s$, out$)
    'atanh(x) = Log((1 + x) / (1 - x)) / 2
    out$ = zero$
End Sub

'Convert s$ FROM base base1% TO base base2%, including decimals to digits% places.
's$ is modified in place.  No errors for illegal digits, eg 161 base 2 is
'treated as (1*2^2)+(6*2^1)+(1*2^0) even though the "6" is wrong.  Bases
'to 16 are formed with 1..F, but larger bases are formed with digit groups
'separated by commas, eg 6,6,@100=(6*100^1+6*100^0)=606.  Bases ok to 32K!
'Appends "@n" to end of string if base2%<>10, which GetArg() will recognize.
'Slow because of divisions, but the decimals are fun.
'
Sub bBase (s$, base1%, base2%)
    Dim b1$, b2$, whole$, dec$, n$, r$, t$, tn$, dig$, z$
    Dim negflag%, digmask%, groupflag%, dpt%
    Dim i%, j%, last%, nn%

    If base1% < 2 Or base2% < 2 Then s$ = Error$: Exit Sub
    If base1% = base2% Then Exit Sub
    If Left$(s$, 1) = neg$ Then s$ = Mid$(s$, 2): negflag% = True
    b1$ = LTrim$(Str$(base1%))
    b2$ = LTrim$(Str$(base2%))
    digmask% = Len(LTrim$(Str$(base2% - 1)))

    'convert FROM base base1%
    dpt% = InStr(s$, dp$)
    If dpt% = 0 Then dpt% = Len(s$) + 1

    'if base 10, then we're done
    If base1% = 10 Then
        whole$ = Left$(s$, dpt% - 1)
        dec$ = Mid$(s$, dpt%)

    Else
        'else figure whole part
        n$ = Left$(s$, dpt% - 1)
        GoSub bbConvertString
        whole$ = n$

        'figure decimal part
        n$ = Mid$(s$, dpt% + 1)
        If Len(n$) Then
            GoSub bbConvertString
            bPowerInt b1$, LTrim$(Str$(last%)), t$
            bDiv n$, t$, dec$
        End If
    End If

    'convert TO base base2%
    'if base 10, then we're done
    If base2% = 10 Then
        bAdd whole$, dec$, s$

    Else
        s$ = ""

        'figure whole part
        Do
            z$ = whole$
            bDivIntMod z$, b2$, whole$, n$
            nn% = Val(n$)
            GoSub bbGetDigit
            s$ = dig$ + s$
        Loop Until whole$ = zero$

        'figure decimal part
        If Len(dec$) Then
            s$ = s$ + dp$
            r$ = one$
            Do
                z$ = r$
                bMul z$, b2$, r$
                bMul dec$, r$, n$
                bInt n$
                nn% = Val(n$)
                GoSub bbGetDigit
                s$ = s$ + dig$
                z$ = n$
                bDiv z$, r$, n$
                z$ = n$
                bSub dec$, z$, n$
                dec$ = n$
            Loop Until dec$ = zero$ Or Len(s$) > digits%
        End If
    End If

    If Len(s$) = 0 Then s$ = zero$
    If s$ <> zero$ Then
        If base2% <> 10 Then s$ = s$ + " " + basechr$ + b2$
        If negflag% Then s$ = neg$ + s$
    End If
    Exit Sub

    'receive whole number n$ in base base1% and return it in base 10
    bbConvertString:
    tn$ = zero$
    last% = Len(n$)
    groupflag% = (base1% > 16) Or (InStr(n$, basesep$) > 0)
    i% = 1
    Do
        If i% > last% Then Exit Do

        If groupflag% Then
            'digits in groups, eg 6,6,b100 = 6*10^1 + 6*10^0
            j% = InStr(i%, n$, basesep$)
            If j% = 0 Then j% = last%
            nn% = Val(Mid$(n$, i%, j%))
            i% = j% + 1

        Else
            'digits 1 by 1, eg 123 or ABC
            nn% = Asc(Mid$(n$, i%, 1))
            i% = i% + 1
            Select Case nn%
                Case 48 To 57: nn% = nn% - 48
                Case 65 To 90: nn% = nn% - 55
                Case Else: nn% = 0
            End Select
        End If

        'skip illegal digits?
        'IF nn% >= base1% THEN nn% = 0

        t$ = tn$
        bMul t$, b1$, tn$
        bInc tn$, nn%
    Loop
    n$ = tn$
    Return

    'return base base2% digit or group for nn%
    bbGetDigit:
    If base2% > 16 Then
        dig$ = LTrim$(Str$(nn%))
        dig$ = String$(digmask% - Len(dig$), zero$) + dig$ + basesep$
    ElseIf nn% < 10 Then
        dig$ = Chr$(nn% + asc0)
    Else
        dig$ = Chr$(nn% + 55)
    End If
    Return

End Sub

'check if s$ is in some other number base and convert it to base 10.
'
Sub bBase10 (s$)
    Dim numbase%

    bBaseCheck s$, numbase%
    If numbase% Then bBase s$, numbase%, 10
End Sub

'return number and base from a string, or 0 if no base (=base 10).
'eg 100b2 returns s$="100" and numbase%=2
'
Sub bBaseCheck (s$, numbase%)
    Dim i%, n%

    If bIsBase%(s$) Then
        'deal with 6bb16 (=6B hex)
        For i% = Len(s$) To 1 Step -1
            If UCase$(Mid$(s$, i%, 1)) = basechr$ Then n% = i%: Exit For
        Next i%
        numbase% = Val(Mid$(s$, n% + 1))
        s$ = Left$(s$, n% - 1)
    Else
        numbase% = False
    End If
End Sub

'Strip a number to "standard form" with no leading or trailing 0s and no
'final "."  All routines should return all arguments in this form.
'
Sub bClean (s$)
    Dim sign%

    If Left$(s$, 1) = neg$ Then s$ = Mid$(s$, 2): sign% = True
    bStripZero s$
    If InStr(s$, dp$) Then bStripTail s$
    If sign% And s$ <> zero$ Then s$ = neg$ + s$

End Sub

'clean up a number for display so .6 -> 0.6
'
Sub bCleanShow (s$)
    bClean s$
    If Left$(s$, 2) = "-." Then
        s$ = "-0." + Mid$(s$, 3)
    ElseIf Left$(s$, 1) = dp$ Then
        s$ = zero$ + s$
    End If
End Sub

'Compare two numbers using fast string compares.  This can screw up since it
'uses string length, eg it reports "8"<"8." so watch out.  The practice in
'these routines is no leading or trailing 0s and no final "."  See bClean().
'
'Return 1 if s1 > s2
'       0 if s1 = s2
'      -1 if s1 < s2
'
Function bComp% (s1$, s2$)
    Dim s1flag%, s2flag%, sign1%, sign2%
    Dim dp1%, dp2%, arg%

    'kludge to fix 0<.1
    If Left$(s1$, 1) = dp$ Then s1$ = zero$ + s1$: s1flag% = True
    If Left$(s2$, 1) = dp$ Then s2$ = zero$ + s2$: s2flag% = True

    sign1% = (Left$(s1$, 1) = neg$)
    sign2% = (Left$(s2$, 1) = neg$)
    dp1% = InStr(s1$, dp$): If dp1% = 0 Then dp1% = Len(s1$) + 1
    dp2% = InStr(s2$, dp$): If dp2% = 0 Then dp2% = Len(s2$) + 1

    If sign1% <> sign2% Then
        If sign1% Then arg% = -1 Else arg% = 1
    ElseIf s1$ = s2$ Then
        arg% = 0
    ElseIf (dp1% < dp2%) Or ((dp1% = dp2%) And (s1$ < s2$)) Then
        arg% = -1
    Else
        arg% = 1
    End If

    If sign1% And sign2% Then arg% = -arg%
    If s1flag% Then s1$ = Mid$(s1$, 2)
    If s2flag% Then s2$ = Mid$(s2$, 2)
    bComp% = arg%

End Function

'out = cos(x)
'
Sub bCos (s$, out$)
    Dim t$, tfac$, fac$, z$
    Dim nfac&
    Dim olddigits%, flag%

    '             x^2   x^4   x^6
    'cos(x) = 1 - --- + --- - --- + ...
    '              2!    4!    6!

    t$ = s$
    bNormRad t$
    olddigits% = digits%
    digits% = digits% + 5
    z$ = t$
    bMul t$, z$, tfac$
    bTrimDig tfac$
    t$ = one$
    nfac& = 2
    fac$ = two$
    out$ = t$
    flag% = False

    Do
        z$ = t$
        bMul z$, tfac$, t$
        bTrimDig t$
        z$ = t$
        bDiv z$, fac$, t$
        bTrimDig t$
        If bIsZero%(t$) Then Exit Do
        If flag% Then
            z$ = out$
            bAdd z$, t$, out$
        Else
            z$ = out$
            bSub z$, t$, out$
        End If
        flag% = Not flag%
        fac$ = LTrim$(Str$((nfac& + 1&) * (nfac& + 2&)))
        nfac& = nfac& + 2&
    Loop

    digits% = olddigits%
    bTrimDig out$

End Sub

'out = cosh(x)
'
Sub bCosh (s$, out$)
    'cosh(x) = (Exp(x) + Exp(-x)) / 2
    out$ = zero$
End Sub

'out = cot(s)
'
Sub bCot (s$, out$)
    Dim t$, tc$, ts$

    'cot=cos/sin
    t$ = s$
    bNormRad t$
    bSin t$, ts$
    If bIsZero%(ts$) Then
        out$ = Error$
    Else
        bCos t$, tc$
        bDiv tc$, ts$, out$
    End If

End Sub

'out = coth(s)
'
Sub bCoth (s$, out$)
    'coth(x) = (Exp(x) + Exp(-x)) / (Exp(x) - Exp(-x))
    out$ = zero$
End Sub

'out = csc(s)
'
Sub bCsc (s$, out$)
    'csc(s)=1/sin(s)

    bSin s$, out$
    If bIsZero%(out$) Then
        out$ = Error$
    Else
        bInv out$
    End If

End Sub

'out = csch(s)
'
Sub bCsch (s$, out$)
    'csch(x) = 2 / (Exp(x) - Exp(-x))
    out$ = zero$
End Sub

'return decimal part of number (or 0)
'
Sub bDec (s$)
    Dim n%

    n% = InStr(s$, dp$)
    If n% Then s$ = Mid$(s$, n%) Else s$ = zero$
End Sub

'degrees to radians, rad=deg*pi/180
'
Sub bDegToRad (s$)
    Dim t$, z$

    bPi t$
    z$ = t$
    bDiv z$, "180", t$
    z$ = s$
    bMod z$, "360", s$
    z$ = s$
    bMul t$, z$, s$
End Sub

'out = s1 / s2
'
Sub bDiv (s1$, s2$, out$)
    Dim t$
    Dim slog1%, sign1%, slog2%, sign2%
    Dim outlog%, outsign%, olddigits%

    'strip divisor
    t$ = s2$
    bLogGet t$, slog2%, sign2%, True

    'divide by zero?
    If t$ = zero$ Then
        out$ = Error$

        'do powers of 10 with shifts
    ElseIf t$ = one$ Then
        out$ = s1$
        sign1% = bSign%(out$)
        If sign1% = negative Then bAbs out$
        bShift out$, -slog2%
        If sign1% <> sign2% Then bNeg out$

        'the hard way
    Else
        'strip all
        s2$ = t$: t$ = ""
        bLogGet s1$, slog1%, sign1%, True

        'figure decimal point and sign of answer
        outlog% = slog1% + bLogDp%(s2$, slog2%)
        If sign1% <> sign2% Then outsign% = negative Else outsign% = positive

        'bump digits past leading zeros and always show whole quotient
        olddigits% = digits%
        digits% = digits% + Len(s2$)
        If digits% < outlog% + 1 Then digits% = outlog% + 1

        'do it, ignore remainder
        If Len(s2$) <= maxlongdig Then bDivLong s1$, s2$, out$, t$ Else bDivChar s1$, s2$, out$, t$

        'clean up
        bLogPut out$, outlog%, outsign%
        bLogPut s1$, slog1%, sign1%
        bLogPut s2$, slog2%, sign2%
        digits% = olddigits%
    End If

End Sub

'out = s1 / s2 using character algorithm, digit by digit, slow but honest.
's1$ and s2$ must be stripped first, no decimals.
'
Sub bDivChar (s1$, s2$, quotient$, remainder$)
    Dim last1%, last2%, ldvd%, lrem%, dig%, borrow%
    Dim i%, j%, n%
    Dim dvd$

    last1% = Len(s1$) 'length of the dividend
    last2% = Len(s2$) 'length of the divisor
    quotient$ = ""
    remainder$ = ""

    For i% = 1 To digits%
        'get next digit of dividend or zero$ if past end
        If i% <= last1% Then
            dvd$ = remainder$ + Mid$(s1$, i%, 1)
        Else
            dvd$ = remainder$ + zero$
        End If

        'if dividend < divisor then digit%=0 else have to calculate it.
        'do fast compare using string operations. see bComp%()
        bStripZero dvd$
        ldvd% = Len(dvd$)
        If (ldvd% < last2%) Or ((ldvd% = last2%) And (dvd$ < s2$)) Then
            'divisor is bigger, so digit is 0, easy!
            dig% = 0
            remainder$ = dvd$

        Else
            'dividend is bigger, but no more than 9 times bigger.
            'subtract divisor until we get remainder less than divisor.
            'time hog, average is 5 tries through j% loop.  There's a better way.
            For dig% = 1 To 9
                remainder$ = ""
                borrow% = 0
                For j% = 0 To ldvd% - 1
                    n% = last2% - j%
                    If n% < 1 Then n% = 0 Else n% = Val(Mid$(s2$, n%, 1))
                    n% = Val(Mid$(dvd$, ldvd% - j%, 1)) - n% - borrow%
                    If n% >= 0 Then borrow% = 0 Else borrow% = 1: n% = n% + 10
                    remainder$ = Chr$(asc0 + n%) + remainder$
                Next j%

                'if remainder < divisor then exit
                bStripZero remainder$
                lrem% = Len(remainder$)
                If (lrem% < last2%) Or ((lrem% = last2%) And (remainder$ < s2$)) Then Exit For

                dvd$ = remainder$
                ldvd% = Len(dvd$)
            Next dig%

        End If
        quotient$ = quotient$ + Chr$(asc0 + dig%)
    Next i%

End Sub

'out = integer part of s1 / s2
'
Sub bDivInt (s1$, s2$, out$)
    Dim t$

    bDivIntMod s1$, s2$, out$, t$
End Sub

's1 / s2 = integer and remainder (s1 = s2 * q + r)
'bDivInt() and bDivMod() call this.
'
Sub bDivIntMod (s1$, s2$, quotient$, remainder$)
    Dim slog1%, sign1%, slog2%, sign2%
    Dim olddigits%, outlog%, outsign%

    olddigits% = digits%

    'strip the numbers, set flag false to NOT trim zeros, slower but needed
    bLogGet s2$, slog2%, sign2%, False
    If s2$ = zero$ Then quotient$ = Error$: remainder$ = Error$: Exit Sub
    bLogGet s1$, slog1%, sign1%, False

    'figure decimal point and sign of answer
    outlog% = slog1% + bLogDp%(s2$, slog2%)
    If sign1% <> sign2% Then outsign% = negative Else outsign% = positive

    'a trick: figure the decimal and only find that many digits
    digits% = outlog% + 1

    'send the work out
    If Len(s2$) <= maxlongdig Then bDivLong s1$, s2$, quotient$, remainder$ Else bDivChar s1$, s2$, quotient$, remainder$

    'clean up
    bLogPut s1$, slog1%, sign1%
    bLogPut s2$, slog2%, sign2%
    bClean quotient$
    bClean remainder$
    If sign1% <> sign2% Then bNeg quotient$
    digits% = olddigits%

End Sub

'out = s1 / s2 using fast long-integer algorithm. s2$ must be <= 8 digits.
's1$ and s2$ must be stripped first, no decimals.
'
Sub bDivLong (s1$, s2$, quotient$, remainder$)
    Dim rmdr&, dividend&, divisor&
    Dim dig%, i%

    quotient$ = ""
    rmdr& = 0
    divisor& = Val(s2$)

    For i% = 1 To digits%
        dividend& = rmdr& * 10& + Val(Mid$(s1$, i%, 1))
        dig% = dividend& \ divisor&
        quotient$ = quotient$ + Chr$(asc0 + dig%)
        rmdr& = dividend& - dig% * divisor&
    Next i%

    If Len(quotient$) = 0 Then quotient$ = zero$
    remainder$ = LTrim$(Str$(rmdr&))

End Sub

'Return an ellipsis... repeat just the decimal or whole string if no decimal.
'Stop at digits% length.  Handy for big test numbers.
'
Sub bDot (s$, out$)

    Dim t$
    Dim n%

    n% = InStr(s$, dp$)
    If n% Then t$ = Mid$(s$, n% + 1) Else t$ = s$
    out$ = s$
    Do
        out$ = out$ + t$
    Loop Until Len(out$) >= digits%
    out$ = Left$(out$, digits%)

End Sub

'out = e^s
'
Sub bExp (s$, out$)
    Dim t$, fac$, z$
    Dim olddigits%, eflag%

    olddigits% = digits%

    'if e^1, see if we already have it.
    If bIsEqual%(s$, one$) Then
        bMemory t$, emem, memget
        If digits% <= Len(t$) - 1 Then out$ = t$: bTrimDig out$: Exit Sub
        eflag% = True
    End If
    digits% = digits% + 5

    'e^x = 1 + x + x^2/2! + x^3/3! + ...

    out$ = one$
    t$ = one$
    fac$ = one$

    Do
        z$ = t$
        bMul z$, s$, t$
        bTrimDig t$
        z$ = t$
        bDiv z$, fac$, t$
        bTrimDig t$
        If bIsZero%(t$) Then Exit Do
        z$ = out$
        bAdd z$, t$, out$
        bInc fac$, 1
    Loop

    digits% = olddigits%
    bTrimDig out$
    If eflag% Then bMemory out$, emem, memput

End Sub

'out = s!
'
Sub bFactorial (s$, out$)
    Dim t$, mul$, z$
    Dim num&, product&
    Dim last%, i%

    bInt s$
    bAbs s$
    If bIsZero%(s$) Then out$ = one$: Exit Sub '0!=1  really!
    If Len(s$) <= maxlongdig Then GoSub bfLong Else GoSub bfChar
    Exit Sub

    bfChar:
    'start the easy way to 99999999! then finish.  This could take weeks!
    t$ = s$
    s$ = String$(maxlongdig, "9")
    GoSub bfLong
    bSwapString s$, t$
    If out$ = abortmsg$ Then Return

    Do Until t$ = s$
        bInc t$, 1
        z$ = out$
        bMul z$, t$, out$
    Loop
    Return

    bfLong:
    'this is the long-integer multiply slightly customized
    out$ = one$
    For num& = 2& To CLng(Val(s$))
        mul$ = out$
        last% = Len(mul$)
        out$ = Space$(last%)
        product& = 0
        For i% = last% To 1 Step -1
            product& = product& + Val(Mid$(mul$, i%, 1)) * num&
            Mid$(out$, i%, 1) = Chr$(asc0 + CInt(product& Mod 10&))
            product& = product& \ 10&
        Next i%
        If product& Then out$ = LTrim$(Str$(product&)) + out$
    Next num&
    Return

End Sub

'out = GCD(s1,s2)
'figure Greatest Common Divisor using Euclid's Algorithm
'Byte, Jan 86, p. 397
'
Sub bGCD (s1$, s2$, out$)
    Dim div$, dvd$, t$

    'work with copies
    div$ = s1$
    dvd$ = s2$
    If bIsMore%(div$, dvd$) Then bSwapString div$, dvd$

    Do Until bIsZero%(div$)
        bMod dvd$, div$, t$
        dvd$ = div$
        div$ = t$
    Loop
    out$ = dvd$

End Sub

's += num%
'Fast increment s$ by num% for internal use, but not quite primetime.
's$ must be positive (but decimals are ok).  It's ok to use negative num%
'for decrements but if result goes negative it returns "0" with no warning.
'num% must be an integer +-32k.
'
Sub bInc (s$, num%)
    Dim dig%, n%, borrow%

    If num% = 0 Then Exit Sub
    dig% = InStr(s$, dp$)
    If dig% Then dig% = dig% - 1 Else dig% = Len(s$)
    n% = num%
    If n% > 0 Then 'increment (n>0)
        Do While n%
            If dig% < 1 Then
                s$ = LTrim$(Str$(n%)) + s$
                n% = 0
            Else
                n% = n% + Val(Mid$(s$, dig%, 1))
                Mid$(s$, dig%, 1) = Chr$(asc0 + (n% Mod 10))
                n% = n% \ 10
                dig% = dig% - 1
            End If
        Loop
    Else 'decrement (n<0)
        n% = -n%
        Do While n%
            If dig% < 1 Then s$ = zero$: Exit Do
            borrow% = 0
            n% = Val(Mid$(s$, dig%, 1)) - n%
            Do While n% < 0
                n% = n% + 10: borrow% = borrow% + 1
            Loop
            Mid$(s$, dig%, 1) = Chr$(asc0 + n%)
            n% = borrow%
            dig% = dig% - 1
        Loop
    End If
    bStripZero s$
End Sub

'Initialize b_routines, set globals, etc
'
Sub bInit ()
    Dim i%

    'a few defaults
    'digits% = defaultdigits
    errormsg$ = "error"
    abortmsg$ = "abort"

    'clear memory
    zstack% = 0
    For i% = 0 To maxmem
        bmem$(i%) = zero$
    Next i%
    For i% = 1 To maxstack
        zmem$(i%) = zero$
    Next i%

    'useful constants
    cname$(pimem) = "pi": bmem$(pimem) = "3.14159265358979323846264338327"
    cname$(pi2mem) = "2pi": bmem$(pi2mem) = "6.28318530717958647692528676654"
    cname$(emem) = "e": bmem$(emem) = "2.71828182845904523536028747135"
    cname$(phimem) = "phi": bmem$(phimem) = "1.61803398874989484820458683436"
    cname$(ln10mem) = "ln(10)": bmem$(ln10mem) = "2.30258509299404568401799145468"
    cname$(ln2mem) = "ln(2)": bmem$(ln2mem) = ".693147180559945309417232121458"

    bncpath$ = "" 'path for files (or current dir if null)
    prmcntfile$ = "BNPRMCNT.DAT" 'prime count table
    '    LoadPrimeTable

End Sub

's = int(s)
'truncate towards 0 like Basic FIX: bInt(-3.3) returns -3.
'
Sub bInt (s$)
    Dim n%

    n% = InStr(s$, dp$)
    If n% Then
        If n% = 1 Then s$ = zero$ Else s$ = Left$(s$, n% - 1)
        If s$ = neg$ Or Left$(s$, 2) = "-." Then s$ = zero$
    End If

End Sub

'return s1\s2 if s2 is divisor of s1, else return 0.
'
Sub bIntDiv (s1$, s2$, out$)
    Dim t$

    bDivIntMod s1$, s2$, out$, t$
    If t$ <> zero$ Then out$ = zero$
End Sub

's = 1/s
'
Sub bInv (s$)
    Dim z$
    z$ = s$
    bDiv one$, z$, s$
End Sub

'return false or the position of the "B" if s$ is in another number base,
'eg 123b5 and abcb16 return 4.
'
Function bIsBase% (s$)
    bIsBase% = InStr(UCase$(s$), basechr$)
End Function

'return true if s1 divides s2
'
Function bIsDiv% (s1$, s2$)
    Dim t$

    bMod s2$, s1$, t$
    bIsDiv% = (t$ = zero$)
End Function

'return true if s1 = s2
'
Function bIsEqual% (s1$, s2$)
    bIsEqual% = (s1$ = s2$)
End Function

'return true if s$ is even, no decimals!
'
Function bIsEven% (s$)
    bIsEven% = (Val(Right$(s$, 1)) Mod 2 = 0)
End Function

'return true if s in an integer (no decimal point).
'
Function bIsInteger% (s$)
    bIsInteger% = (InStr(s$, dp$) = 0)
End Function

'return true if s1 < s2
'
Function bIsLess% (s1$, s2$)
    bIsLess% = (bComp%(s1$, s2$) = -1)
End Function

'return true if s1 > s2
'
Function bIsMore% (s1$, s2$)
    bIsMore% = (bComp%(s1$, s2$) = 1)
End Function

'return true if s is negative
'
Function bIsNeg% (s$)
    bIsNeg% = (Left$(s$, 1) = neg$)
End Function

Function bIsNotZero% (s$)
    Dim flag%, i%

    flag% = False
    For i% = 1 To Len(s$)
        If InStr("0-. ", Mid$(s$, i%, 1)) = False Then flag% = True: Exit For
    Next i%
    bIsNotZero% = flag%
End Function

'return true if odd
'
Function bIsOdd% (s$)
    bIsOdd% = (Val(Right$(s$, 1)) Mod 2 <> 0)
End Function

'return true if s is prime
'
Function bIsPrime% (s$)
    bIsPrime% = (bPrmDiv$(s$, False) = s$)
End Function

's is pseudoprime to base b if (b,s)=1 and b^(s-1)=1 (mod s).  Integers only!
'
Function bIsPseudoPrime% (s$, bas$)
    Dim t$, smin$
    Dim flag%

    flag% = False
    If bIsRelPrime%(s$, bas$) Then
        smin$ = s$: bInc smin$, -1
        bModPower bas$, smin$, s$, t$
        flag% = (t$ = one$)
    End If
    bIsPseudoPrime% = flag%
End Function

'return true if s1 and s2 are relatively prime, ie share no factor
'
Function bIsRelPrime% (s1$, s2$)
    Dim gcd$

    bGCD s1$, s2$, gcd$
    bIsRelPrime% = bIsEqual%(gcd$, one$)
End Function

'Return true if s$ is zero$ or null, s$ needn't be clean.
'
Function bIsZero% (s$)
    Dim flag%, i%

    flag% = True
    For i% = 1 To Len(s$)
        If InStr("0-. ", Mid$(s$, i%, 1)) = False Then flag% = False: Exit For
    Next i%
    bIsZero% = flag%
End Function

'out = LCM(s1,s2)
'figure Least Common Multiple using Euclid's Algorithm for GCD.
'LCM (a,b) = (a*b) / GCD(a,b)
'Byte, Jan 86, p. 397
'
Sub bLcm (s1$, s2$, out$)
    Dim product$, gcd$

    bMul s1$, s2$, product$
    bGCD s1$, s2$, gcd$
    bDivInt product$, gcd$, out$

End Sub

'out = ln(s), natural logarithm
'
Sub bLn (s$, out$)
    Dim t$, d$, tfac$, fac$, z$, w$
    Dim ln10flag%, ln2flag%, olddigits%, flag%

    If Not bIsMore%(s$, zero$) Then out$ = Error$: Exit Sub
    If bIsEqual%(s$, "10") Then
        bMemory t$, ln10mem, memget
        If digits% <= Len(t$) - 1 Then out$ = t$: bTrimDig out$: Exit Sub
        ln10flag% = True
    ElseIf bIsEqual%(s$, "2") Then
        bMemory t$, ln2mem, memget
        If digits% <= Len(t$) - 1 Then out$ = t$: bTrimDig out$: Exit Sub
        ln2flag% = True
    End If
    olddigits% = digits%
    digits% = digits% + 5
    If bIsLess%(s$, "1.6") Then GoSub LnSeries2 Else GoSub LnSeries1
    digits% = olddigits%
    bTrimDig out$
    If ln10flag% Then
        bMemory out$, ln10mem, memput
    ElseIf ln2flag% Then
        bMemory out$, ln2mem, memput
    End If
    Exit Sub

    '              x-1   1  x-1      1  x-1
    'ln(x) = 2 * [ --- + - (---)^3 + - (---)^5 + ... ]  {x > 0}
    '              x+1   3  x+1      5  x+1
    'faster for x > 1.6

    LnSeries1:
    t$ = s$: bInc t$, -1
    d$ = s$: bInc d$, 1
    bDiv t$, d$, out$
    t$ = out$
    z$ = t$
    w$ = t$
    bMul z$, w$, tfac$
    bTrimDig tfac$
    fac$ = three$

    Do
        z$ = t$
        bMul z$, tfac$, t$
        bTrimDig t$
        bDiv t$, fac$, d$
        bTrimDig d$
        If bIsZero%(d$) Then Exit Do
        z$ = out$
        bAdd z$, d$, out$
        bInc fac$, 2
    Loop
    z$ = out$
    bMul z$, two$, out$
    Return

    '                1           1
    'ln(x) = (x-1) - - (x-1)^2 + - (x-1)^3 - ...    {2 >= x > 0}
    '                2           3
    'faster for x < 1.6

    LnSeries2:
    bSub s$, one$, t$
    tfac$ = t$
    out$ = t$
    fac$ = two$
    flag% = False

    Do
        z$ = t$
        bMul z$, tfac$, t$
        bTrimDig t$
        bDiv t$, fac$, d$
        bTrimDig d$
        If bIsZero%(d$) Then Exit Do
        If flag% Then
            z$ = out$
            bAdd z$, d$, out$
        Else
            z$ = out$
            bSub z$, d$, out$
        End If
        flag% = Not flag%
        bInc fac$, 1
    Loop
    Return

End Sub

'out = log(s1) base s2, or ln(s1) if s2=0
'
Sub bLog (s1$, s2$, out$)
    Dim t$, z$

    'log(s) base(n) = ln(s) / ln(n)
    If bIsEqual%(s2$, "-1") Then
        bExp s1$, out$
    ElseIf bIsNeg%(s2$) Then
        out$ = Error$
    Else
        bLn s1$, out$
        If Not bIsZero%(s2$) Then
            bLn s2$, t$
            z$ = out$
            bDiv z$, t$, out$
        End If
    End If
End Sub

'Take whole number and log from bLogGet() and return number of decimal
'places in the expanded number; OR take string and number of decimal points
'desired and return the log.  It works both ways.
'
Function bLogDp% (s$, logdp%)
    bLogDp% = Len(s$) - 1 - logdp%
End Function

'Strip s$ to whole number and base 10 integer logarithm and sign.  Decimal
'point is implied after the first digit, and slog% counts places left or
'right.  bLogPut() reverses the process, and bLogDp() gives info on the
'decimals. Tricky, but it works and simplifies dividing and multipling.
'
Sub bLogGet (s$, slog%, sign%, zeroflag%)
    Dim dpt%, n%

    If Left$(s$, 1) = neg$ Then s$ = Mid$(s$, 2): sign% = negative Else sign% = positive
    bStripZero s$
    dpt% = InStr(s$, dp$)
    Select Case dpt%
        Case 0
            slog% = Len(s$) - 1
        Case 1
            n% = dpt% + 1
            Do While Mid$(s$, n%, 1) = zero$
                n% = n% + 1
            Loop
            s$ = Mid$(s$, n%)
            slog% = dpt% - n%
        Case Else
            s$ = Left$(s$, dpt% - 1) + Mid$(s$, dpt% + 1)
            slog% = dpt% - 2
    End Select

    'remove trailing 0's if zeroflag%
    If zeroflag% Then bStripTail s$

End Sub

'Restore a number from the integer and log figured in bLogGet(). s$ is taken
'as a number with the decimal after first digit, and decimal is moved slog%
'places left or right, adding 0s as required. Called by bDiv() and bMul().
'
Sub bLogPut (s$, slog%, sign%)
    Dim last%

    last% = Len(s$)
    If Len(s$) = 0 Or s$ = zero$ Then
        s$ = zero$
    ElseIf slog% < 0 Then
        s$ = dp$ + String$(-slog% - 1, zero$) + s$
    ElseIf slog% > last% - 1 Then
        s$ = s$ + String$(slog% - last% + 1, zero$) + dp$
    Else
        s$ = Left$(s$, slog% + 1) + dp$ + Mid$(s$, slog% + 2)
    End If
    bClean s$
    If sign% = negative Then s$ = neg$ + s$
End Sub

'return the largest of two integers
'
Function bMaxInt% (n1%, n2%)
    If n1% >= n2% Then bMaxInt% = n1% Else bMaxInt% = n2%
End Function

'Put or Get a number string in a cell.  Only 64k in PDS, much less in QB,
'beep for overflow.
'
Sub bMemory (s$, memcell%, memop%)
    Dim i%

    'in range?
    If memcell% < 0 Or memcell% > maxmem Then Exit Sub

    Select Case memop%
        Case memget: s$ = bmem$(memcell%)
        Case memput
            'check for enough memory?
            bmem$(memcell%) = s$
        Case memclr: For i% = 0 To 9: bmem$(i%) = "": Next i%
    End Select

End Sub

'Perform Miller test for a number and base, return true if s may be prime.
'  Schneier, Applied Cryptography, p.260
'  Robbins, Beginning Number Theory, p.262
'
Function bMillerTest% (s$, bas$)
    Dim t$, z$, rmd$, w$, y$
    Dim j%, flag%

    Static lasts$, smin$, m$, k%
    If bIsEven%(s$) Then bMillerTest% = False: Exit Function

    'figure {k,m} so s = 2^k * m + 1.  Save results for next call.
    If s$ <> lasts$ Then
        smin$ = s$
        bInc smin$, -1
        m$ = smin$
        k% = 0
        Do
            t$ = m$
            bDivIntMod t$, two$, m$, rmd$
            If rmd$ = zero$ Then k% = k% + 1 Else m$ = t$: Exit Do
        Loop
    End If

    bModPower bas$, m$, s$, z$
    If z$ = one$ Or z$ = smin$ Then
        flag% = True
    Else
        flag% = False
        For j% = 1 To k% - 1
            w$ = z$
            y$ = z$
            bMul w$, y$, z$
            w$ = z$
            bMod w$, s$, z$
            If z$ = smin$ Then flag% = True: Exit For
        Next j%
    End If
    bMillerTest% = flag%

End Function

'out = s1 mod s2
'remainder after division, works for non-integers, but doesn't mean much.
'
Sub bMod (s1$, s2$, out$)
    Dim t$

    bDivIntMod s1$, s2$, t$, out$
End Sub

'out = s1^-1 (mod s2)
'Find inverse mod a number with Extended Euclid Algorithm.
'Given a and n, find x such that a*x = 1 (mod n).
'Answer exists only if a and n are relatively prime, else return 0.
'
Sub bModInv (s1$, s2$, out$)
    Dim g0$, g1$, g2$, v0$, v1$, v2$, y$, t$, z$

    If Not bIsRelPrime%(s1$, s2$) Then out$ = zero$: Exit Sub

    g0$ = s2$: g1$ = s1$
    v0$ = zero$: v1$ = one$

    Do Until bIsZero%(g1$)
        bDivInt g0$, g1$, y$
        bMul y$, g1$, t$
        bSub g0$, t$, g2$
        bMul y$, v1$, t$
        bSub v0$, t$, v2$
        g0$ = g1$: g1$ = g2$
        v0$ = v1$: v1$ = v2$
    Loop

    out$ = v0$
    If bIsNeg%(out$) Then
        z$ = out$
        bAdd z$, s2$, out$
    End If
End Sub

'out = (s1 ^ s2) mod s3
'
Sub bModPower (s1$, s2$, s3$, out$)
    'Use variation of "Russian Peasant Method" to figure m=(c^d) mod n.
    'Byte, Jan 83, p.206.
    'test value: (71611947 ^ 63196467) mod 94815109 = 776582

    'm=1
    'do
    '  if d is odd then m=(m*c) mod n
    '  c=(c*c) mod n
    '  d=int(d/2)
    'loop while d>0
    'm is the answer

    Dim c$, d$, z$, w$
    Static n$ 'remember modulus for next call

    'positive numbers only, modulus must be >1!  Find mod inverse if s2=-1.
    out$ = errormsg$
    If Len(s3$) Then n$ = s3$
    If bIsNeg%(s1$) Or bIsNeg%(n$) Then Exit Sub
    If bIsNeg%(s2$) Then
        If bIsEqual%(s2$, "-1") Then bModInv s1$, n$, out$
        Exit Sub
    End If

    c$ = s1$
    d$ = s2$
    out$ = one$

    Do
        If bIsOdd%(d$) Then
            z$ = out$
            bMul z$, c$, out$
            z$ = out$
            bMod z$, n$, out$
        End If
        z$ = c$
        w$ = c$
        bMul z$, w$, c$
        z$ = c$
        bMod z$, n$, c$
        z$ = d$
        bDivInt z$, two$, d$
    Loop Until bIsZero%(d$)

End Sub

'out = s1 * s2
'
Sub bMul (s1$, s2$, out$)
    Dim t$
    Dim slog1%, sign1%, slog2%, sign2%, outdp%, outsign%, outlog%, swapflag%

    'strip multiplier
    t$ = s2$
    bLogGet t$, slog2%, sign2%, True

    'times 0
    If t$ = zero$ Then
        out$ = zero$

        'do powers of 10 with shifts
    ElseIf t$ = one$ Then
        out$ = s1$
        sign1% = bSign%(out$)
        If sign1% = negative Then bAbs out$
        bShift out$, slog2%
        If sign1% <> sign2% Then bNeg out$

        'the hard way
    Else
        'strip all
        s2$ = t$: t$ = ""
        bLogGet s1$, slog1%, sign1%, True

        'figure decimal point and sign of answer
        outdp% = bLogDp%(s1$, slog1%) + bLogDp%(s2$, slog2%)
        If sign1% <> sign2% Then outsign% = negative Else outsign% = positive

        'always multiply by the shorter number
        If Len(s2$) > Len(s1$) Then bSwapString s1$, s2$: swapflag% = True

        'do it
        If Len(s2$) <= maxlongdig Then bMulLong s1$, s2$, out$ Else bMulChar s1$, s2$, out$

        'clean up
        outlog% = bLogDp%(out$, outdp%)
        bLogPut out$, outlog%, outsign%
        If swapflag% Then bSwapString s1$, s2$
        bLogPut s1$, slog1%, sign1%
        bLogPut s2$, slog2%, sign2%

    End If

End Sub

'out = s1 * s2 using character algorithm, slow but honest.  Whole numbers
'only.  Inner loop is optimized and hard to understand, but it works.
'
Sub bMulChar (s1$, s2$, out$)
    Dim last1%, last2%, last%
    Dim i%, j%, k%, sj%, ej%
    Dim product&

    last1% = Len(s1$)
    last2% = Len(s2$)
    last% = last1% + last2%
    out$ = Space$(last%)
    product& = 0
    For i% = 0 To last% - 1
        k% = last1% - i%
        sj% = 1 - k%: If sj% < 0 Then sj% = 0
        ej% = last1% - k%: If ej% > last2% - 1 Then ej% = last2% - 1
        For j% = sj% To ej%
            product& = product& + Val(Mid$(s1$, k% + j%, 1)) * Val(Mid$(s2$, last2% - j%, 1))
        Next j%
        Mid$(out$, last% - i%, 1) = Chr$(asc0 + CInt(product& Mod 10&))
        product& = product& \ 10&
    Next i%
    If product& Then out$ = LTrim$(Str$(product&)) + out$
End Sub

'out = s1 * s2 using fast long-integer algorithm. s2$ must be <= 8 digits.
's1$ and s2$ must be stripped first, whole numbers only.
'
Sub bMulLong (s1$, s2$, out$)
    Dim last1%, i%
    Dim s2val&, product&

    last1% = Len(s1$)
    s2val& = Val(s2$)
    out$ = Space$(last1%)
    For i% = last1% To 1 Step -1
        product& = product& + Val(Mid$(s1$, i%, 1)) * s2val&
        Mid$(out$, i%, 1) = Chr$(asc0 + CInt(product& Mod 10&))
        product& = product& \ 10&
    Next i%
    If product& Then out$ = LTrim$(Str$(product&)) + out$
End Sub

'out = nCr, s1 things taken s2 at a time, order doesn't matter
'
Sub bnCr (s1$, s2$, out$)
    '         n!      nPr
    'nCr = -------- = ---
    '      r!(n-r)!    r!

    'nCr = nCn-r, so pick the smaller
    Dim r$, t$, z$

    bSub s1$, s2$, r$
    If bIsMore%(r$, s2$) Then r$ = s2$

    bnPr s1$, r$, t$
    If t$ = errormsg$ Then Exit Sub
    z$ = r$
    bFactorial z$, r$
    bDivInt t$, r$, out$

End Sub

's = -s
'
Sub bNeg (s$)
    If Left$(s$, 1) = neg$ Then s$ = Mid$(s$, 2) Else s$ = neg$ + s$
End Sub

'Normalize s1 to range of +-{s2}
'
Sub bNorm (s1$, s2$)
    Dim t$
    Dim dpt%

    t$ = s1$
    bAbs t$
    If Not bIsLess%(t$, s2$) Then
        bDiv s1$, s2$, t$
        dpt% = InStr(t$, dp$)
        If dpt% = 0 Then
            s1$ = zero$
        Else
            bMul s2$, Mid$(t$, dpt%), s1$
            bTrimDig s1$
            If bIsNeg%(t$) Then bNeg s1$
        End If
    End If
End Sub

'Normalize an angle in radians to +-2pi
'
Sub bNormRad (s$)
    Dim pi2$

    bPi2 pi2$
    bNorm s$, pi2$
End Sub

'out = nPr, s1 things taken s2 at a time, order matters
'
Sub bnPr (s1$, s2$, out$)
    '        n!
    'nPr = ------ = (n)*(n-1)*...*(n-r+1)
    '      (n-r)!

    Dim t$, z$

    bAbs s1$
    bAbs s2$
    If bIsMore%(s2$, s1$) Then out$ = errormsg$: Exit Sub
    If bIsZero%(s2$) Then out$ = one$: Exit Sub
    bSub s1$, s2$, out$
    bInc out$, 1
    t$ = out$

    Do Until t$ = s1$
        bInc t$, 1
        z$ = out$
        bMul t$, z$, out$
    Loop

End Sub

'out = phi (Golden Ratio)
'
Sub bPhi (out$)
    Dim t$
    Dim olddigits%

    olddigits% = digits%

    'see if it's already in memory
    bMemory t$, phimem, memget
    If digits% <= Len(t$) - 1 Then
        out$ = t$
        bTrimDig out$
        Exit Sub
    End If

    'else calculate it.  Need to write this.
    out$ = t$

End Sub

'pi with Machin's formula: pi= 16 arctan(1/5) - 4 arctan(1/239)
'
Sub bPi (out$)
    Dim d$, k$, t$, tfac$, atan$, atan5$, atan239$, z$
    Dim olddigits%, flag%

    olddigits% = digits%

    'see if it's already in memory
    bMemory t$, pimem, memget
    If digits% <= Len(t$) - 1 Then out$ = t$: bTrimDig out$: Exit Sub

    'figure a bit more and truncate to get last place right
    digits% = digits% + 5

    t$ = five$: GoSub bpArctan: atan5$ = atan$
    t$ = "239": GoSub bpArctan: atan239$ = atan$
    bMul four$, atan5$, t$
    bSub t$, atan239$, out$

    digits% = olddigits%
    bTrimDig out$
    bMemory out$, pimem, memput

    Exit Sub

    'Machin's series    1     1       1
    ' 4*arctan(1/n) = { - - ----- + ----- - ... }
    '                   n   3*n^3   5*n^5
    bpArctan:
    z$ = t$
    bMul z$, t$, tfac$
    z$ = t$
    bMul z$, four$, t$
    atan$ = zero$
    k$ = one$
    flag% = True

    Do
        z$ = t$
        bDiv z$, tfac$, t$
        bDiv t$, k$, d$
        bTrimDig d$
        If bIsZero%(d$) Then Exit Do
        If flag% Then
            z$ = atan$
            bAdd z$, d$, atan$
        Else
            z$ = atan$
            bSub z$, d$, atan$
        End If
        flag% = Not flag%
        bInc k$, 2
    Loop
    Return

End Sub

'return s=2*pi, from memory if possible
'
Sub bPi2 (s$)
    Dim z$
    bMemory s$, pi2mem, memget
    If digits% <= Len(s$) - 1 Then
        bTrimDig s$
    Else
        bPi s$
        z$ = s$
        bMul z$, two$, s$
        bMemory s$, pi2mem, memput
    End If
End Sub

'out = s1 ^ s2, for real s2
'
Sub bPower (s1$, s2$, out$)
    Dim z$
    Dim invflag%

    If bIsInteger%(s2$) Then
        bPowerInt s1$, s2$, out$
    Else
        If bIsNeg%(s2$) Then bNeg s2$: invflag% = True
        bLn s1$, out$
        z$ = out$
        bMul z$, s2$, out$
        z$ = out$
        bExp z$, out$
        If invflag% Then bNeg s2$: bInv out$
    End If
End Sub

'out = s1 ^ s2, for integer s2 only!  (It truncates s2)
'Uses variation of "Russian Peasant Method".
'
Sub bPowerInt (s1$, s2$, out$)
    Dim c$, d$, z$, w$
    Dim invflag%

    bInt s2$
    If bIsZero%(s2$) Then out$ = one$: Exit Sub
    If bIsNeg%(s2$) Then bNeg s2$: invflag% = True

    c$ = s1$
    d$ = s2$
    out$ = one$

    Do
        If bIsOdd%(d$) Then
            z$ = out$
            bMul z$, c$, out$
        End If
        z$ = c$
        w$ = c$
        bMul z$, w$, c$
        z$ = d$
        bDivInt z$, two$, d$
    Loop Until bIsZero%(d$)

    If invflag% Then
        bNeg s2$
        z$ = out$
        bDiv one$, z$, out$
    End If
End Sub

'If pflag% then count primes to s and return count else return s_th prime.
'If dspcol% then show progress on current line starting with that column.
'Will go forever if pflag% and s not prime.
'
Function bPrmCount$ (s$, dspcol%, pflag%)
    Dim cnt$, num$
    Dim n&
    Dim i%, dinc%

    'deal with exceptions up front
    Select Case s$
        Case "0": cnt$ = zero$: num$ = zero$
        Case "1": cnt$ = zero$: num$ = two$
        Case "2": cnt$ = one$: num$ = three$
        Case "3": cnt$ = two$: num$ = five$

        Case Else
            'if no prime table then start from scratch else cue into table
            If maxprmcnt% = 0 Then
                i% = 0

                'pflag% true: s$ is prime, count to it and return count
            ElseIf pflag% Then
                If bIsMore%(s$, LTrim$(Str$(prmcnt&(maxprmcnt%)))) Then
                    i% = maxprmcnt%
                Else
                    n& = Val(s$)
                    For i% = 1 To maxprmcnt%
                        If prmcnt&(i%) > n& Then Exit For
                    Next i%
                    i% = i% - 1
                End If

                'pflag% false: s$ is the count, return that prime
            Else
                If bIsMore%(s$, LTrim$(Str$(maxprmcnt% * 1000&))) Then
                    i% = maxprmcnt%
                Else
                    i% = Val(s$) \ 1000
                End If
            End If

            'get start values
            If i% = 0 Then
                num$ = five$: cnt$ = three$
            Else
                num$ = LTrim$(Str$(prmcnt&(i%)))
                cnt$ = LTrim$(Str$(i% * 1000&))
            End If
            If Val(num$) Mod 6 = 1 Then dinc% = 4 Else dinc% = 2

            'finally to work
            Do
                If bIsPrime%(num$) Then
                    'IF dspcol% AND (RIGHT$(cnt$, 2) = "00") THEN PRINT "."; : IF POS(0) = 75 THEN LOCATE , dspcol%: PRINT TAB(80); : LOCATE , dspcol%
                    If pflag% Then
                        If num$ = s$ Then Exit Do
                    Else
                        If cnt$ = s$ Then Exit Do
                    End If
                    bInc cnt$, 1
                End If
                bInc num$, dinc%
                dinc% = 6 - dinc%
            Loop
    End Select
    If pflag% Then bPrmCount$ = cnt$ Else bPrmCount$ = num$

End Function

'Return smallest prime divisor or s$ if prime, no size limit, but slows
'down when s$>8 digits.  This is strictly brute force and slow.  Press <esc>
'to abort and it returns 0.  If dspflag% then print (most) factors in
'lblTryNum of Factor frame, an inelegant kludge used by Factor().  A speed
'hit, but fun to watch.
'
Function bPrmDiv$ (s$, dspflag%)
    Dim num$, sfac$, maxfac$, t$
    Dim lfac&, lnum&, lmaxfac&, ldfac&
    Dim i%, cnt%, flag%, dfac%

    num$ = s$
    bInt num$
    bAbs num$
    If Len(num$) <= maxlongdig Then GoSub bpdLong Else GoSub bpdChar
    Exit Function

    bpdChar:
    'try some classic divisibility tests for small factors.
    'Cf Gardner, Unexpected Hanging, p.160.

    'by 2?
    '  If dspflag% Then
    '  frmBncFactor.lblTryNum.Caption = two$
    '  frmBncFactor.lblTryNum.Refresh
    'End If
    If Val(Right$(num$, 1)) Mod 2 = 0 Then bPrmDiv$ = two$: Return

    'by 3?
    'IF dspflag% THEN LOCATE , dspflag%: PRINT three$;
    '  If dspflag% Then
    '  frmBncFactor.lblTryNum.Caption = three$
    '  frmBncFactor.lblTryNum.Refresh
    'End If

    lfac& = 0
    For i% = 1 To Len(num$)
        lfac& = lfac& + Asc(Mid$(num$, i%, 1)) - asc0
    Next i%
    If lfac& Mod 3 = 0 Then bPrmDiv$ = three$: Return

    'by 5?
    'IF dspcol% THEN LOCATE , dspcol%: PRINT five$;
    '  If dspflag% Then
    '  frmBncFactor.lblTryNum.Caption = five$
    '  frmBncFactor.lblTryNum.Refresh
    'End If

    If Val(Right$(num$, 1)) Mod 5 = 0 Then bPrmDiv$ = five$: Return

    'by 7, 11, or 13?
    'IF dspcol% THEN LOCATE , dspcol%: PRINT "7+";
    '  If dspflag% Then
    '  frmBncFactor.lblTryNum.Caption = "7+"
    '  frmBncFactor.lblTryNum.Refresh
    'End If

    lfac& = 0
    i% = Len(num$) + 1
    cnt% = 3
    flag% = True
    Do
        i% = i% - 3: If i% < 1 Then cnt% = i% + 2: i% = 1
        If flag% Then
            lfac& = lfac& + Val(Mid$(num$, i%, cnt%))
        Else
            lfac& = lfac& - Val(Mid$(num$, i%, cnt%))
        End If
        flag% = Not flag%
    Loop While i% > 1
    If lfac& Mod 7 = 0 Then bPrmDiv$ = "7": Return
    If lfac& Mod 11 = 0 Then bPrmDiv$ = "11": Return
    If lfac& Mod 13 = 0 Then bPrmDiv$ = "13": Return

    'main loop, increment factor by 2 or 4.
    sfac$ = "17"
    dfac% = 2
    bSqrInt num$, maxfac$

    Do
        'IF dspcol% THEN LOCATE , dspcol%: PRINT sfac$;
        '    If dspflag% Then
        '  frmBncFactor.lblTryNum.Caption = sfac$
        '  frmBncFactor.lblTryNum.Refresh
        'End If

        bMod num$, sfac$, t$
        If bIsZero%(t$) Then Exit Do
        bInc sfac$, dfac%
        dfac% = 6 - dfac%
        If bIsMore%(sfac$, maxfac$) Then sfac$ = num$: Exit Do
        'If INKEY$ = esc$ Then sfac$ = zero$: Exit Do
    Loop
    bPrmDiv$ = sfac$
    Return

    bpdLong:
    lnum& = Val(num$)
    If lnum& <= 1 Then
        lfac& = 1&
    ElseIf lnum& Mod 2& = 0& Then
        lfac& = 2&
    ElseIf lnum& Mod 3& = 0& Then
        lfac& = 3&
    Else
        lmaxfac& = Int(Sqr(lnum&))
        lfac& = 5&
        ldfac& = 2&
        Do
            'IF dspcol% THEN LOCATE , dspcol%: PRINT lfac&;
            '      If dspflag% Then
            '  frmBncFactor.lblTryNum.Caption = LTrim$(Str$(lfac&))
            '  frmBncFactor.lblTryNum.Refresh
            'End If

            If lnum& Mod lfac& = 0& Then Exit Do
            lfac& = lfac& + ldfac&
            ldfac& = 6& - ldfac&
            If lfac& > lmaxfac& Then lfac& = lnum&: Exit Do
        Loop
    End If
    bPrmDiv$ = LTrim$(Str$(lfac&))
    Return

End Function

'Do Rabin-Miller Prime test times% times.  If true, then probability that
's is composite is < .25^times%.  Of course s$ is an odd integer.
'If dspcol% then show progress on current line starting with that column.
'
Function bPrmTest% (s$, times%, dspflag%)
    Dim n$
    Dim i%, flag%

    If bIsEven%(s$) Then bPrmTest% = False: Exit Function
    flag% = True
    For i% = 2 To times% + 1
        'If dspflag% Then Print ".";
        n$ = LTrim$(Str$(i%))
        If bIsRelPrime%(s$, n$) Then
            flag% = bMillerTest%(s$, n$)
        Else
            flag% = False
        End If
        If Not flag% Then Exit For
    Next i%
    bPrmTest% = flag%
End Function

'radians to degrees, deg=rad*180/pi
'
Sub bRadToDeg (s$)
    Dim t$, z$

    bNormRad s$
    bPi t$
    z$ = t$
    bDiv "180", z$, t$
    z$ = s$
    bMul t$, z$, s$
    bTrimDig s$
End Sub

'Return a random number.  Expects an argument of form m.n:
'  m.n  returns m digits+decimal+n digits
'  m    returns m digits
'  m.   m digits with random decimal point
'<null> use last mask
'
Sub bRand (s$, out$)
    Static randmask$
    Dim t$
    Dim n%

    t$ = s$
    If Len(t$) = 0 Then
        If Len(randmask$) = 0 Then randmask$ = "5"
        t$ = randmask$
    End If

    randmask$ = t$
    n% = InStr(t$, dp$)
    If n% = 0 Then
        'R3 -> abc
        out$ = bRnd$(Val(t$))
    ElseIf n% = 1 Then
        'R.3 -> .abc
        out$ = dp$ + bRnd$(Val(Mid$(t$, 2)))
    ElseIf n% = Len(t$) Then
        'R3. -> abc with random dp
        out$ = bRnd$(Val(t$) + 1)
        Mid$(out$, Int(1 + Rnd * Len(out$)), 1) = dp$
    Else
        'R3.2 -> abc.ef
        out$ = bRnd$(Val(Mid$(t$, 1, n% - 1))) + dp$ + bRnd$(Val(Mid$(t$, n% + 1)))
    End If

End Sub

'Return a random number string of places% digits.
'
Function bRnd$ (places%)
    Dim t$
    Dim i%

    If places% = 0 Then
        bRnd$ = zero$
    Else
        t$ = Space$(places%)
        Mid$(t$, 1, 1) = Chr$(asc0 + Int(Rnd * 9) + 1)
        For i% = 2 To places%
            Mid$(t$, i%, 1) = Chr$(asc0 + Int(Rnd * 10))
        Next i%
        bRnd$ = t$
    End If
End Function

'Return a random number < max$, to digits places.
'
Sub bRndNum (max$, out$)

    bMul LTrim$(Str$(Rnd)), max$, out$

End Sub

'out = s2 root of s1, (or s1 ^ 1/s2)
'
Sub bRoot (s1$, s2$, out$)
    Dim t$, x$, root$, mroot$, r$, newx$, z$
    Dim negflag%, invflag%

    'easy 0 values
    If bIsZero%(s2$) Then out$ = one$: Exit Sub
    If bIsZero%(s1$) Then out$ = zero$: Exit Sub

    'use logs for non-integer roots
    If Not bIsInteger%(s2$) Then
        t$ = s2$: bInv t$
        bPower s1$, t$, out$
        Exit Sub
    End If

    x$ = s1$
    root$ = s2$
    If bIsNeg%(x$) Then If bIsEven%(root$) Then out$ = errormsg$: Exit Sub Else bNeg x$: negflag% = True
    If bIsNeg%(root$) Then bNeg root$: invflag% = True
    If root$ = two$ Then bSqr x$, out$ Else GoSub brRoot
    If invflag% Then bInv out$
    If negflag% Then bNeg out$

    Exit Sub

    'Newton-Raphson method for any integer root
    brRoot:
    mroot$ = root$
    bInc mroot$, -1

    Do
        'newx = [x*(n-1) + s/x^(n-1)] / (n-1)
        bMul x$, mroot$, r$
        bPowerInt x$, mroot$, t$
        bTrimDig t$
        z$ = t$
        bDiv s1$, z$, t$
        bTrimDig t$
        z$ = t$
        bAdd r$, z$, t$
        z$ = t$
        bDiv z$, root$, newx$

        'a bug, these are never equal
        'bTrimDig x$
        'bTrimDig newx$
        'IF x$ = newx$ THEN EXIT DO

        If Left$(x$, digits% - 1) = Left$(newx$, digits% - 1) Then Exit Do
        x$ = newx$
        bTrimDig x$
    Loop

    out$ = newx$

    Return

End Sub

'Take a string in "scientific notation" and expand it.
'Recognize both 66.6e2 AND 66.6d2 as 6660 to accommadate QB.
'                   ^          ^
'
Sub bSci (s$)
    Dim n%, xp%, sign%

    s$ = UCase$(LTrim$(s$))
    n% = InStr(s$, "E")
    If n% = 0 Then n% = InStr(s$, "D") 'because double# use "D" not "E"
    If n% Then
        xp% = Val(Mid$(s$, n% + 1))
        s$ = Left$(s$, n% - 1)
        bLogGet s$, n%, sign%, True
        bLogPut s$, n% + xp%, sign%
    End If
End Sub

'out = sec(x)
'
Sub bSec (s$, out$)
    'sec(x)=1/cos(x)

    bCos s$, out$
    If bIsZero%(out$) Then
        out$ = Error$
    Else
        bInv out$
    End If
End Sub

'out = sech(s)
'
Sub bSech (s$, out$)
    'sech(x) = 2 / (Exp(x) + Exp(-x))
    out$ = zero$
End Sub

'Set digits% to dig% (or return value if 0).
'
Sub bSetDigits (dig%)
    If dig% = False Then dig% = digits% Else digits% = dig%
End Sub

'shift decimal n% digits (minus=left), i.e multiply/divide by 10.
'
Sub bShift (s$, n%)
    Dim slog%, sign%

    bLogGet s$, slog%, sign%, False
    bLogPut s$, slog% + n%, sign%
End Sub

'return sign of number (-1 or +1)
'
Function bSign% (s$)
    If bIsNeg%(s$) Then bSign% = negative Else bSign% = positive
End Function

'out = sin(x)
'
Sub bSin (s$, out$)
    Dim t$, tfac$, fac$, z$
    Dim nfac&
    Dim olddigits%, flag%

    '             x^3   x^5   x^7
    'sin(x) = x - --- + --- - --- + ...
    '              3!    5!    7!

    t$ = s$
    bNormRad t$
    olddigits% = digits%
    digits% = digits% + 5
    z$ = t$
    bMul t$, z$, tfac$
    bTrimDig tfac$
    nfac& = 3
    fac$ = "6"
    out$ = t$
    flag% = False

    Do
        z$ = t$
        bMul z$, tfac$, t$
        bTrimDig t$
        z$ = t$
        bDiv z$, fac$, t$
        bTrimDig t$
        If bIsZero%(t$) Then Exit Do
        If flag% Then
            z$ = out$
            bAdd z$, t$, out$
        Else
            z$ = out$
            bSub z$, t$, out$
        End If
        flag% = Not flag%
        fac$ = LTrim$(Str$((nfac& + 1&) * (nfac& + 2&)))
        nfac& = nfac& + 2&
    Loop

    digits% = olddigits%
    bTrimDig out$

End Sub

'out = sinh(x)  hyperbolic sine
'
Sub bSinh (s$, out$)
    'sinh(x) = (Exp(x) - Exp(-x)) / 2
    out$ = zero$
End Sub

'out = SQR(s) using the old hand method
'I learned this in high school, but I still don't understand it. It's fast.
Sub bSqr (s$, out$)
    Dim dvd$, div$, dig$, newdiv$, t$, z$
    Dim slog%, ssign%, slen%, spt%, olddigits%, n%, m%

    If bIsNeg%(s$) Then out$ = errormsg$: Exit Sub

    'strip to whole number + group digits by 2 left or right of decimal
    bLogGet s$, slog%, ssign%, True
    slen% = Len(s$)
    If slog% Mod 2 Then spt% = 2 Else spt% = 1

    'Force at least enough digits to show integer of root
    olddigits% = digits%
    n% = 1 + slog% \ 2
    If digits% < n% Then digits% = n%

    'figure first digit and setup loop
    n% = Val(Left$(s$ + "0", spt%))
    m% = Int(Sqr(n%))
    out$ = LTrim$(Str$(m%))
    dvd$ = LTrim$(Str$(n% - m% * m%))
    spt% = spt% + 1

    Do
        'all done?
        If (spt% > slen% And bIsZero%(dvd$)) Or Len(out$) >= digits% Then Exit Do

        'append next 2 digits (or 0s) to dividend
        dvd$ = dvd$ + Left$(Mid$(s$, spt%, 2) + "00", 2)
        spt% = spt% + 2

        'divisor=twice the root * 10
        z$ = out$
        bAdd out$, z$, div$
        bShift div$, 1

        'estimate divisor, and adjust if too big.  Unit is next digit of root.
        bDivInt dvd$, div$, dig$
        Do
            bAdd div$, dig$, newdiv$
            bMul newdiv$, dig$, t$
            If Not bIsMore%(t$, dvd$) Then Exit Do
            bInc dig$, -1
        Loop
        out$ = out$ + dig$

        'form new divisor
        z$ = dvd$
        bSub z$, t$, dvd$

    Loop

    'clean up
    bLogPut s$, slog%, ssign%
    If slog% < 0 Then slog% = slog% - 1
    bLogPut out$, slog% \ 2, ssign%
    digits% = olddigits%

End Sub

'out = INT(SQR(s)), largest integer n such that n^2 <= s
'
Sub bSqrInt (s$, out$)
    Dim t$
    Dim olddigits%

    If bIsNeg%(s$) Then out$ = errormsg$: Exit Sub
    t$ = s$
    bInt t$

    'a trick: let bSqr() figure the decimal and only find that many digits
    olddigits% = digits%
    digits% = 0
    bSqr t$, out$
    digits% = olddigits%

End Sub

'Return a number string.  str(4.31) returns 4 "31"s, i.e. 31313131.
'Handy for big test numbers.
'
Sub bStr (s$, out$)
    Dim t$
    Dim n%, i%

    n% = InStr(s$, ".")
    If n% Then t$ = Mid$(s$, n% + 1) Else t$ = Right$(s$, 1)
    out$ = ""
    For i% = 1 To Val(s$)
        out$ = t$ + out$
    Next i%
    If Len(out$) = 0 Then out$ = zero$

End Sub

'Trim leading spaces, add decimal points, eliminate signs.
'Returns last%=length of string, dpt%=decimal place, sign%=-1 or 1.
'Called only by bAdd() and bSub() which needs a final decimal point.
'
Sub bStripDp (s$, last%, dpt%, sign%)
    If Left$(s$, 1) = neg$ Then s$ = Mid$(s$, 2): sign% = negative Else sign% = positive
    bStripZero s$
    If InStr(s$, dp$) = 0 Then s$ = s$ + dp$
    If s$ = dp$ Then s$ = "0."
    dpt% = InStr(s$, dp$)
    last% = Len(s$)
End Sub

'Strip trailing 0s to "." (but leave something)
'
Sub bStripTail (s$)
    Dim n%

    n% = Len(s$)
    Do While Mid$(s$, n%, 1) = zero$
        n% = n% - 1
        If n% <= 1 Then Exit Do
    Loop
    If n% Then If Mid$(s$, n%, 1) = dp$ Then n% = n% - 1
    s$ = Left$(s$, n%)
    If Len(s$) = 0 Then s$ = zero$
End Sub

'Strip leading 0s and final "." (but leave something)
'
Sub bStripZero (s$)
    Dim n%

    n% = 1
    Do While Mid$(s$, n%, 1) = zero$
        n% = n% + 1
    Loop
    If n% > 1 Then s$ = Mid$(s$, n%)
    If Right$(s$, 1) = dp$ Then s$ = Left$(s$, Len(s$) - 1)
    If Len(s$) = 0 Then s$ = zero$
End Sub

'out = s1 - s2
'
Sub bSub (s1$, s2$, out$)
    Dim last1%, dp1%, sign1%
    Dim last2%, dp2%, sign2%
    Dim last%, d1%, d2%, dpt%, borrow%, swapflag%
    Dim i%, n%

    'strip the numbers
    bStripDp s1$, last1%, dp1%, sign1%
    bStripDp s2$, last2%, dp2%, sign2%

    'treat different signs as addition
    If sign1% = negative And sign2% = positive Then
        bNeg s1$
        bNeg s2$
        bAdd s1$, s2$, out$
        bNeg s2$
        Exit Sub
    ElseIf sign1% = positive And sign2% = negative Then
        bAdd s1$, s2$, out$
        bNeg s2$
        Exit Sub
    End If

    'align the decimal points and digit pointers
    last% = bMaxInt%(last1% - dp1%, last2% - dp2%)
    d1% = last% + dp1%
    d2% = last% + dp2%
    dpt% = bMaxInt%(dp1%, dp2%)
    last% = dpt% + last%
    out$ = Space$(last%)
    borrow% = 0

    'always subtract smaller from bigger to avoid complements
    If bIsMore%(s2$, s1$) Then
        bSwapString s1$, s2$
        bSwapInt d2%, d1%
        swapflag% = True
    End If

    'do the subtraction right to left
    For i% = last% To 1 Step -1
        If i% <> dpt% Then
            If d1% > 0 Then n% = Val(Mid$(s1$, d1%, 1)) Else n% = 0
            If d2% > 0 Then n% = n% - Val(Mid$(s2$, d2%, 1))
            n% = n% - borrow%
            If n% >= 0 Then borrow% = 0 Else borrow% = 1: n% = n% + 10
            Mid$(out$, i%, 1) = Chr$(asc0 + n%)
        Else
            Mid$(out$, i%, 1) = dp$
        End If
        d1% = d1% - 1
        d2% = d2% - 1
    Next i%

    'clean up
    If sign1% = negative Then s1$ = neg$ + s1$: s2$ = neg$ + s2$
    If swapflag% Then
        bSwapString s1$, s2$
        sign1% = -sign1%
    End If
    If sign1% = negative Then out$ = neg$ + out$
    bClean s1$
    bClean s2$
    bClean out$

End Sub

Sub bSwapInt (s1%, s2%)
    Dim t%

    t% = s1%
    s1% = s2%
    s2% = t%
End Sub

Sub bSwapString (s1$, s2$)
    Dim t$

    t$ = s1$
    s1$ = s2$
    s2$ = t$
End Sub

'out = tan(s)
'
Sub bTan (s$, out$)
    Dim t$, tc$, ts$

    'tan=sin/cos
    t$ = s$
    bNormRad t$
    bCos t$, tc$
    If bIsZero%(tc$) Then
        out$ = Error$
    Else
        bSin t$, ts$
        bDiv ts$, tc$, out$
    End If
End Sub

Sub bTanh (s$, out$)
    'tanh(x) = (Exp(x) - Exp(-x)) / (Exp(x) + Exp(-x))
    out$ = zero$
End Sub

'Truncate s$ to digits% places
'
Sub bTrimDig (s$)
    s$ = Left$(s$, digits% + 1)
End Sub

'Try to load table of prime counts, 66th item is the 66000th prime.
'Should be in current dircetory, but check path if not.
'
'Sub LoadPrimeTable ()
'    Dim file$, path$, in$
'    Dim i%, n%, m%, flag%, filenum%

'    file$ = prmcntfile$
'    filenum% = FreeFile
'    maxprmcnt% = False

''    if table not in current dir, then check path
'  If Len(Dir$(file$)) = 0 Then
'    path$ = Environ$("PATH")
'    flag% = True
'    n% = 1
'    Do While n% < Len(path$)
'      m% = InStr(n%, path$, ";")
'      If m% = 0 Then m% = Len(path$) + 1
'      file$ = Mid$(path$, n%, m% - n%)
'      If Right$(file$, 1) <> "\" Then file$ = file$ + "\"
'      file$ = file$ + prmcntfile$
'      If Len(Dir$(file$)) Then
'        bncpath$ = Mid$(path$, n%, m% - n%) + "\"
'        flag% = False
'        Exit Do
'      End If
'      n% = m% + 1
'    Loop
'    If flag% Then Exit Sub
'  End If

''  found it, check for signature and load data
'  Open file$ For Input As #filenum%
'  Line Input #filenum%, in$
'  If UCase$(Left$(in$, 7)) = "'BIGNUM" Then
'    Do
'      Line Input #filenum%, in$
'    Loop While Left$(in$, 1) = "'"
'    maxprmcnt% = Val(in$)
'    ReDim prmcnt&(1 To maxprmcnt%)
'    For i% = 1 To maxprmcnt%
'      Input #filenum%, prmcnt&(i%)
'    Next i%
'  End If
'  Close #filenum%

'End Sub

'PUT or GET a number from the stack, or beep
'
Sub WorkStack (s$, memop%)
    Dim i%

    Select Case memop%
        Case memget
            If zstack% Then
                s$ = zmem$(zstack%)
                zstack% = zstack% - 1
            Else
                s$ = zero$ 'stack underflow
            End If
        Case memput
            If (zstack% < maxstack) Then
                zstack% = zstack% + 1
                zmem$(zstack%) = s$
            Else
                'stack overflow
            End If
        Case memclr
            zstack% = False
            For i% = 1 To maxstack: zmem$(i%) = zero$: Next i%
    End Select
End Sub
Reply
#2
That demo leaves a lot to be desired. Undecided 

Pete
Reply
#3
what would you like to see in the demo?
Reply
#4
As is, it just appears as such an odd way to express using strings to perform basic math functions. I looked at the 24 digit sets, all from one continuous string, and all using the division sub routines to increase the size of the quotient, which is passed back as outs and passed back again as r. Add together each set and it gives the next 24-digit set. As such, I cannot see a practical way to have it demonstrate the four various math routines with the subroutines in the code; so I guess what I would like to see it do is handle user input to demonstrate this is a number multiplied by another number with another number subtracted from it, divided by ant=other number, and added to another number, etc. Also, how it handles negatives and decimals.

Pete
Reply
#5
OK Pete
Code: (Select All)
$NoPrefix
$Console:Only
Dest Console

'BIGNUM.BAS v0.n
'Sep-Dec 1996 by Marc Kummel aka Treebeard.
'Contact mkummel@rain.org, http://www.rain.org/~mkummel/
'
' ** site no longer available, use the link below
' https://web.archive.org/web/20200220020034/http://www.rain.org/~mkummel/tbvault.html

'  Conditions:
'-------------

'This program and source code are yours to use and modify as you will, but
'they are offered as freeware with no warranty whatsoever.  Give me credit,
'but do not distribute any changes under my name, or attribute such changes
'to me in any way.  You're on your own!

Const zero = "0", one = "1"
Const dp = ".", neg = "-", asc0 = 48
Const negative = -1, positive = 1 'returned by bComp()
Const maxlongdig = 8 'max digits in long var&
Const true = -1

'useful shared stuff
Dim Shared As Long digits
Dim Shared As String errors

Const null = ""

digits = 24 'digits for division etc

's = |s|
'

'========================================================================

Dim As String n, m, r
Dim As Long i, j
t = Timer

Input "enter n ", n
If n = "" Then
    n = "3.1415926535897932384626433832795"
    Print "n = "; n
End If
Input "enter m ", m
If m = "" Then
    m = "-2.7182818284590452353602874713527"
    Print "m = "; m
End If
Print
bAdd n, m, r
Print "n + m = "; r
bSub n, m, r
Print "n - m = "; r
bMul n, m, r
Print "n * m = "; r
bDiv n, m, r
Print "n / m = "; r


'========================================================================

Sub bAbs (s As String)
    If Left$(s, 1) = neg Then s = Mid$(s, 2)
End Sub

'return true if s is negative
'
Function bIsNeg& (s As String)
    bIsNeg = (Left$(s, 1) = neg)
End Function

'return sign of number (-1 or +1)
'
Function bSign& (s As String)
    If bIsNeg(s) Then bSign = negative Else bSign = positive
End Function


'return the largest of two integers
'
Function bMaxInt& (n1 As Long, n2 As Long)
    If n1 >= n2 Then bMaxInt = n1 Else bMaxInt = n2
End Function

'Compare two numbers using fast string compares.  This can screw up since it
'uses string length, eg it reports "8"<"8." so watch out.  The practice in
'these routines is no leading or trailing 0s and no final "."  See bClean().
'
'Return 1 if s1 > s2
'       0 if s1 = s2
'      -1 if s1 < s2
'
Function bComp& (s1 As String, s2 As String)
    'dim as string dp
    Dim As Long sign1, sign2, dp1, dp2, arg, s1flag, s2flag
    'kludge to fix 0<.1
    If Left$(s1, 1) = dp Then s1 = zero + s1: s1flag = true
    If Left$(s2, 1) = dp Then s2 = zero + s2: s2flag = true

    sign1 = (Left$(s1, 1) = neg)
    sign2 = (Left$(s2, 1) = neg)
    dp1 = InStr(s1, dp): If dp1 = 0 Then dp1 = Len(s1) + 1
    dp2 = InStr(s2, dp): If dp2 = 0 Then dp2 = Len(s2) + 1

    If sign1 <> sign2 Then
        If sign1 Then arg = -1 Else arg = 1
    ElseIf s1 = s2 Then
        arg = 0
    ElseIf (dp1 < dp2) Or ((dp1 = dp2) And (s1 < s2)) Then
        arg = -1
    Else
        arg = 1
    End If

    If sign1 And sign2 Then arg = -arg
    If s1flag Then s1 = Mid$(s1, 2)
    If s2flag Then s2 = Mid$(s2, 2)
    bComp = arg

End Function

'return true if s1 > s2
'
Function bIsMore& (s1 As String, s2 As String)
    bIsMore = (bComp(s1, s2) = 1)
End Function
'Strip leading 0s and final "." (but leave something)
'
Sub bStripZero (s As String)
    Dim As Long n
    n = 1
    Do While Mid$(s, n, 1) = zero
        n = n + 1
    Loop
    If n > 1 Then s = Mid$(s, n)
    If Right$(s, 1) = dp Then s = Left$(s, Len(s) - 1)
    If Len(s) = 0 Then s = zero
End Sub

'Strip trailing 0s to "." (but leave something)
'
Sub bStripTail (s As String)
    Dim As Long n
    n = Len(s)
    Do While Mid$(s, n, 1) = zero
        n = n - 1
        If n <= 1 Then Exit Do
    Loop
    If n Then If Mid$(s, n, 1) = dp Then n = n - 1
    s = Left$(s, n)
    If Len(s) = 0 Then s = zero
End Sub

'Strip s$ to whole number and base 10 integer logarithm and sign.  Decimal
'point is implied after the first digit, and slog% counts places left or
'right.  bLogPut() reverses the process, and bLogDp() gives info on the
'decimals. Tricky, but it works and simplifies dividing and multipling.
'eg s$ -> s$ , slog%
'  660 -> 66 ,  2     (6.6 * 10^ 2)    (or 660,2 if zeroflag%=false)
'  6.6 -> 66 ,  0     (6.6 * 10^ 0)
' .066 -> 66 , -2     (6.6 * 10^-2)
'bDiv(), bMul(), and bSqr() use this to trim unnecessary zeros and to locate
'decimal point.  These set zeroflag% to trim trailing zeros, but bDivIntMod()
'must set it false in order to figure remainder of division.  A kludge.
'
Sub bLogGet (s As String, slog As Long, sign As Long, zeroflag As Long)
    Dim As Long n, dpt
    If Left$(s, 1) = neg Then s = Mid$(s, 2): sign = negative Else sign = positive
    bStripZero s
    dpt = InStr(s, dp)
    Select Case dpt
        Case 0
            slog = Len(s) - 1
        Case 1
            n = dpt + 1
            Do While Mid$(s, n, 1) = zero
                n = n + 1
            Loop
            s = Mid$(s, n)
            slog = dpt - n
        Case Else
            s = Left$(s, dpt - 1) + Mid$(s, dpt + 1)
            slog = dpt - 2
    End Select

    'remove trailing 0's if zeroflag
    If zeroflag Then bStripTail s

End Sub

'Strip a number to "standard form" with no leading or trailing 0s and no
'final "."  All routines should return all arguments in this form.
'
Sub bClean (s As String)
    Dim As Long sign
    If Left$(s, 1) = neg Then s = Mid$(s, 2): sign = true
    bStripZero s
    If InStr(s, dp) Then bStripTail s
    If sign And s <> zero Then s = neg + s
End Sub

'Restore a number from the integer and log figured in bLogGet(). s$ is taken
'as a number with the decimal after first digit, and decimal is moved slog%
'places left or right, adding 0s as required. Called by bDiv() and bMul().
'
Sub bLogPut (s As String, slog As Long, sign As Long)
    Dim As Long last
    last = Len(s)
    If Len(s) = 0 Or s = zero Then
        s = zero
    ElseIf slog < 0 Then
        s = dp + String$(-slog - 1, zero) + s
    ElseIf slog > last - 1 Then
        s = s + String$(slog - last + 1, zero) + dp
    Else
        s = Left$(s, slog + 1) + dp + Mid$(s, slog + 2)
    End If
    bClean s
    If sign = negative Then s = neg + s
End Sub

'shift decimal n% digits (minus=left), i.e multiply/divide by 10.
'
Sub bShift (s As String, n As Long)
    Dim As Long slog, sign
    bLogGet s, slog, sign, 0 'false
    bLogPut s, slog + n, sign
End Sub

's = -s
'
Sub bNeg (s As String)
    If Left$(s, 1) = neg Then s = Mid$(s, 2) Else s = neg + s
End Sub

'Take whole number and log from bLogGet() and return number of decimal
'places in the expanded number; OR take string and number of decimal points
'desired and return the log.  It works both ways.
'
Function bLogDp& (s As String, logdp As Long)
    bLogDp = Len(s) - 1 - logdp
End Function

'out = s1 / s2 using fast long-integer algorithm. s2$ must be <= 8 digits.
's1$ and s2$ must be stripped first, no decimals.
'
Sub bDivLong (s1 As String, s2 As String, quotient As String, remain As String)
    Dim As Long dividend, remainder, divisor, dig, i
    quotient = null
    remainder = 0
    divisor = Val(s2)

    For i = 1 To digits
        dividend = remainder * 10 + Val(Mid$(s1, i, 1))
        dig = dividend \ divisor
        quotient = quotient + Chr$(asc0 + dig)
        remainder = dividend - dig * divisor
    Next i

    If Len(quotient) = 0 Then quotient = zero
    remain = LTrim$(Str$(remainder))

End Sub

'out = s1 / s2 using character algorithm, digit by digit, slow but honest.
's1$ and s2$ must be stripped first, no decimals.
'
Sub bDivChar (s1 As String, s2 As String, quotient As String, remainder As String)
    Dim As Long last1, last2, ldvd, dig, borrow, i, j, n, lrem
    Dim As String dvd
    last1 = Len(s1) 'length of the dividend
    last2 = Len(s2) 'length of the divisor
    quotient = null
    remainder = null

    For i = 1 To digits
        'get next digit of dividend or zero$ if past end
        If i <= last1 Then
            dvd = remainder + Mid$(s1, i, 1)
        Else
            dvd = remainder + zero
        End If

        'if dividend < divisor then digit%=0 else have to calculate it.
        'do fast compare using string operations. see bComp%()
        bStripZero dvd
        ldvd = Len(dvd)
        If (ldvd < last2) Or ((ldvd = last2) And (dvd < s2)) Then
            'divisor is bigger, so digit is 0, easy!
            dig = 0
            remainder = dvd

        Else
            'dividend is bigger, but no more than 9 times bigger.
            'subtract divisor until we get remainder less than divisor.
            'time hog, average is 5 tries through j% loop.  There's a better way.
            For dig = 1 To 9
                remainder = null
                borrow = 0
                For j = 0 To ldvd - 1
                    n = last2 - j
                    If n < 1 Then n = 0 Else n = Val(Mid$(s2, n, 1))
                    n = Val(Mid$(dvd, ldvd - j, 1)) - n - borrow
                    If n >= 0 Then borrow = 0 Else borrow = 1: n = n + 10
                    remainder = Chr$(asc0 + n) + remainder
                Next j

                'if remainder < divisor then exit
                bStripZero remainder
                lrem = Len(remainder)
                If (lrem < last2) Or ((lrem = last2) And (remainder < s2)) Then Exit For

                dvd = remainder
                ldvd = Len(dvd)
            Next dig

        End If
        quotient = quotient + Chr$(asc0 + dig)
    Next i

End Sub

'out = s1 / s2
'
Sub bDiv (s1 As String, s2 As String, outs As String)
    Dim As String t
    Dim As Long slog1, slog2, sign1, sign2, outlog, outsign, olddigits
    'strip divisor
    t = s2
    bLogGet t, slog2, sign2, -1 'true

    'divide by zero?
    If t = zero Then
        outs = errors

        'do powers of 10 with shifts
    ElseIf t = one Then
        outs = s1
        sign1 = bSign(outs)
        If sign1 = negative Then bAbs outs
        bShift outs, -slog2
        If sign1 <> sign2 Then bNeg outs

        'the hard way
    Else
        'strip all
        s2 = t: t = null
        bLogGet s1, slog1, sign1, -1 'true

        'figure decimal point and sign of answer
        outlog = slog1 + bLogDp(s2, slog2)
        If sign1 <> sign2 Then outsign = negative Else outsign = positive

        'bump digits past leading zeros and always show whole quotient
        olddigits = digits
        digits = digits + Len(s2)
        If digits < outlog + 1 Then digits = outlog + 1

        'do it, ignore remainder
        If Len(s2) <= maxlongdig Then bDivLong s1, s2, outs, t Else bDivChar s1, s2, outs, t

        'clean up
        bLogPut outs, outlog, outsign
        bLogPut s1, slog1, sign1
        bLogPut s2, slog2, sign2
        digits = olddigits
    End If

End Sub

'Trim leading spaces, add decimal points, eliminate signs.
'Returns last%=length of string, dpt%=decimal place, sign%=-1 or 1.
'Called only by bAdd() and bSub() which needs a final decimal point.
'
Sub bStripDp (s As String, last As Long, dpt As Long, sign As Long)
    If Left$(s, 1) = neg Then s = Mid$(s, 2): sign = negative Else sign = positive
    bStripZero s
    If InStr(s, dp) = 0 Then s = s + dp
    If s = dp Then s = "0."
    dpt = InStr(s, dp)
    last = Len(s)
End Sub

declare SUB bAdd (s1 as string, s2 as string, outs as string)
'out = s1 - s2
'
Sub bSub (s1 As String, s2 As String, outs As String)
    Dim As Long last, last1, last2, sign1, sign2, dpt, dp1, dp2
    Dim As Long d1, d2, borrow, swapflag, i, n
    'strip the numbers
    bStripDp s1, last1, dp1, sign1
    bStripDp s2, last2, dp2, sign2

    'treat different signs as addition
    If sign1 = negative And sign2 = positive Then
        bNeg s1
        bNeg s2
        bAdd s1, s2, outs
        bNeg s2
        Exit Sub
    ElseIf sign1 = positive And sign2 = negative Then
        bAdd s1, s2, outs
        bNeg s2
        Exit Sub
    End If

    'align the decimal points and digit pointers
    last = bMaxInt(last1 - dp1, last2 - dp2)
    d1 = last + dp1
    d2 = last + dp2
    dpt = bMaxInt(dp1, dp2)
    last = dpt + last
    outs = Space$(last)
    borrow = 0

    'always subtract smaller from bigger to avoid complements
    If bIsMore(s2, s1) Then Swap s2, s1: Swap d2, d1: swapflag = true

    'do the subtraction right to left
    For i = last To 1 Step -1
        If i <> dpt Then
            If d1 > 0 Then n = Val(Mid$(s1, d1, 1)) Else n = 0
            If d2 > 0 Then n = n - Val(Mid$(s2, d2, 1))
            n = n - borrow
            If n >= 0 Then borrow = 0 Else borrow = 1: n = n + 10
            Mid$(outs, i, 1) = Chr$(asc0 + n)
        Else
            Mid$(outs, i, 1) = dp
        End If
        d1 = d1 - 1
        d2 = d2 - 1
    Next i

    'clean up
    If sign1 = negative Then s1 = neg + s1: s2 = neg + s2
    If swapflag Then Swap s2, s1: sign1 = -sign1
    If sign1 = negative Then outs = neg + outs
    bClean s1
    bClean s2
    bClean outs

End Sub

'out = s1 + s2
'
Sub bAdd (s1 As String, s2 As String, outs As String)
    Dim As Long last1, last2, sign1, sign2, dp1, dp2
    Dim As Long last, i, d1, d2, dpt, carry, n
    'strip the numbers
    bStripDp s1, last1, dp1, sign1
    bStripDp s2, last2, dp2, sign2

    'treat different signs as subtraction and exit
    If sign1 = negative And sign2 = positive Then
        bSub s2, s1, outs
        bNeg s1
        Exit Sub
    ElseIf sign1 = positive And sign2 = negative Then
        bSub s1, s2, outs
        bNeg s2
        Exit Sub
    End If

    'align the decimal points and digit pointers
    last = bMaxInt(last1 - dp1, last2 - dp2)
    d1 = last + dp1
    d2 = last + dp2
    dpt = bMaxInt(dp1, dp2)
    last = dpt + last
    outs = Space$(last)
    carry = 0

    'do the addition right to left
    For i = last To 1 Step -1
        If i <> dpt Then
            n = carry
            If d1 > 0 Then n = n + Val(Mid$(s1, d1, 1))
            If d2 > 0 Then n = n + Val(Mid$(s2, d2, 1))
            carry = n \ 10
            Mid$(outs, i, 1) = Chr$(asc0 + (n Mod 10))
        Else
            Mid$(outs, i, 1) = dp
        End If
        d1 = d1 - 1
        d2 = d2 - 1
    Next i
    If carry Then outs = one + outs

    'clean up
    If sign1 = negative Then s1 = neg + s1: s2 = neg + s2: outs = neg + outs
    bClean s1
    bClean s2
    bClean outs
End Sub

'out = s1 * s2 using character algorithm, slow but honest.  Whole numbers
'only.  Inner loop is optimized and hard to understand, but it works.
'
Sub bMulChar (s1 As String, s2 As String, outs As String)
    Dim As Long last, last1, last2, i, j, k, sj, ej, product
    last1 = Len(s1)
    last2 = Len(s2)
    last = last1 + last2
    outs = Space$(last)
    product = 0
    For i = 0 To last - 1
        k = last1 - i
        sj = 1 - k: If sj < 0 Then sj = 0
        ej = last1 - k: If ej > last2 - 1 Then ej = last2 - 1
        For j = sj To ej
            product = product + Val(Mid$(s1, k + j, 1)) * Val(Mid$(s2, last2 - j, 1))
        Next j
        Mid$(outs, last - i, 1) = Chr$(asc0 + CInt(product Mod 10))
        product = product \ 10
    Next i
    If product Then outs = LTrim$(Str$(product)) + outs
End Sub

'out = s1 * s2 using fast long-integer algorithm. s2$ must be <= 8 digits.
's1$ and s2$ must be stripped first, whole numbers only.
'
Sub bMulLong (s1 As String, s2 As String, outs As String)
    Dim As Long last1, s2L, i, product
    last1 = Len(s1)
    s2L = Val(s2)
    outs = Space$(last1)
    For i = last1 To 1 Step -1
        product = product + Val(Mid$(s1, i, 1)) * s2L
        Mid$(outs, i, 1) = Chr$(asc0 + CInt(product Mod 10))
        product = product \ 10
    Next i
    If product Then outs = LTrim$(Str$(product)) + outs
End Sub

'out = s1 * s2
'
Sub bMul (s1 As String, s2 As String, outs As String)
    Dim As Long slog1, slog2, sign1, sign2, outdp, outsign
    Dim As Long outlog, swapflag
    Dim As String t
    'strip multiplier
    t = s2
    bLogGet t, slog2, sign2, true

    'times 0
    If t = zero Then
        outs = zero

        'do powers of 10 with shifts
    ElseIf t = one Then
        outs = s1
        sign1 = bSign(outs)
        If sign1 = negative Then bAbs outs
        bShift outs, slog2
        If sign1 <> sign2 Then bNeg outs

        'the hard way
    Else
        'strip all
        s2 = t: t = null
        bLogGet s1, slog1, sign1, true

        'figure decimal point and sign of answer
        outdp = bLogDp(s1, slog1) + bLogDp(s2, slog2)
        If sign1 <> sign2 Then outsign = negative Else outsign = positive

        'always multiply by the shorter number
        If Len(s2) > Len(s1) Then Swap s1, s2: swapflag = true

        'do it
        If Len(s2) <= maxlongdig Then bMulLong s1, s2, outs Else bMulChar s1, s2, outs

        'clean up
        outlog = bLogDp(outs, outdp)
        bLogPut outs, outlog, outsign
        If swapflag Then Swap s1, s2
        bLogPut s1, slog1, sign1
        bLogPut s2, slog2, sign2

    End If

End Sub
output using the default input (just press return when prompted for input)
Code: (Select All)
enter n
n = 3.1415926535897932384626433832795
enter m
m = -2.7182818284590452353602874713527

n + m = .4233108251307480031023559119268
n - m = 5.8598744820488384738229308546322
n * m = -8.53973422267356706546355086954668447174445893592492906242717965
n / m = -1.155727349790921717910093
Reply
#6
I'm working on big number support for up to 2,147,483,645 digits with strings (need space for the negative sign and the decimal point), always happy to see how other people tackle the general idea for math with strings.
Reply
#7
(07-28-2022, 03:09 PM)James D Jarvis Wrote: I'm working on big number support for up to 2,147,483,645 digits with strings (need space for the negative sign and the decimal point), always happy to see how other people tackle the general idea for math with strings.

I put this together a few years back for +-?* strimg math routines.

What I didn't include was a way to carry repeating decimals (repetends). So 1 / 3 * 3 will result in .9... instead of 1, just as .3... * 3 would result in .9...

So I would consider it unfinished for use in a calculator.

Code: (Select All)
PRINT
INPUT "Limit Display: "; limit&&
LINE INPUT "Use Rounding? Y/N: "; ans$
IF UCASE$(ans$) = "Y" THEN
    round_total% = -1
    LINE INPUT "Show if Rounded? Y/N: "; ans$
    IF UCASE$(ans$) = "Y" THEN show_rounding% = -1 ELSE show_rounding% = 0
ELSE
    round_total% = 0
END IF
LINE INPUT "Display in Scientific Notation? Y/N: "; ans$
IF UCASE$(ans$) = "Y" THEN
    snconvert% = -1
ELSE
    snconvert% = 0
    LINE INPUT "Display in Dollars and Cents? Y/N: "; ans$
    IF UCASE$(ans$) = "Y" THEN currency_display% = -1 ELSE currency_display% = 0
    LINE INPUT "Display Results with Commas? Y/N: "; ans$
END IF
IF UCASE$(ans$) = "Y" THEN comma_display% = -1 ELSE comma_display% = 0
DO
    DO
        LINE INPUT "Number: "; stringmathb$
        IF UCASE$(stringmathb$) = "C" THEN RUN
        origb$ = stringmathb$
        CALL stringmath(stringmatha$, operator$, stringmathb$, runningtotal$, snconvert%, round_total%, show_rounding%, comma_display%, currency_display%, limit&&)
        IF stringmathb$ <> "invalid number" AND stringmathb$ <> "overflow" THEN
            EXIT DO
        ELSE
            PRINT stringmathb$
        END IF
    LOOP
    IF operator$ <> "" THEN
        DO UNTIL INSTR(origa$, ",") = 0
            origa$ = MID$(origa$, 1, INSTR(origa$, ",") - 1) + MID$(origa$, INSTR(origa$, ",") + 1)
        LOOP
        DO UNTIL INSTR(origb$, ",") = 0
            origb$ = MID$(origb$, 1, INSTR(origb$, ",") - 1) + MID$(origb$, INSTR(origb$, ",") + 1)
        LOOP
        IF INSTR(origb$, "$") THEN origb$ = MID$(origb$, 1, INSTR(origb$, "$") - 1) + MID$(origb$, INSTR(origb$, "$") + 1)
        SELECT CASE orig_operator$
            CASE "+"
                runningtotal# = VAL(origa$) + VAL(origb$)
            CASE "-"
                runningtotal# = VAL(origa$) - VAL(origb$)
            CASE "*"
                runningtotal# = VAL(origa$) * VAL(origb$)
            CASE "/"
                runningtotal# = VAL(origa$) / VAL(origb$)
            CASE "C", "c"
                RUN
        END SELECT
        origa$ = LTRIM$(STR$(runningtotal#))
        COLOR 8, 0: PRINT "Numeric Total: "; origa$: COLOR 7, 0
        PRINT "String Total:  "; runningtotal$
    ELSE
        origa$ = runningtotal$: IF INSTR(origa$, "$") THEN origa$ = MID$(origa$, 1, INSTR(origa$, "$") - 1) + MID$(origa$, INSTR(origa$, "$") + 1)
    END IF
    COLOR 2, 0: PRINT "Operator: +-/*: ";: COLOR 7, 0
    DO
        operator$ = INKEY$
        IF LEN(operator$) THEN
            IF operator$ = CHR$(27) THEN SYSTEM
            IF INSTR("-+/*=8cC", operator$) THEN EXIT DO
        END IF
    LOOP
    IF UCASE$(operator$) = "C" THEN RUN
    IF operator$ = "=" THEN operator$ = "+"
    IF operator$ = "8" THEN operator$ = "*"
    orig_operator$ = operator$
    PRINT operator$
LOOP

SUB stringmath (stringmatha$, operator$, stringmathb$, runningtotal$, snconvert%, round_total%, show_rounding%, comma_display%, currency_display%, limit&&)
stringmathround$ = ""
IF limit&& > 2147483640 THEN limit&& = 2147483640
IF limit&& = 0 THEN limit&& = 70 ' Default.

IF RIGHT$(UCASE$(runningtotal$), 1) = "R" THEN runningtotal$ = MID$(runningtotal$, 1, LEN(runningtotal$) - 1) 'Strip off rounding designation.
' Check running total. If S.N. convert to numeric for operations.
IF INSTR(runningtotal$, ",") <> 0 OR INSTR(runningtotal$, "e") <> 0 THEN
    holdstringmathb$ = stringmathb$
    stringmathb$ = runningtotal$
    IF INSTR(runningtotal$, ",") <> 0 THEN GOSUB comma_removal ELSE GOSUB scientific_to_numeric
    runningtotal$ = stringmathb$: stringmathb$ = holdstringmathb$: holdstringmathb$ = ""
END IF
' Check input number. If S.N. convert to numeric for operations.
IF INSTR(UCASE$(stringmathb$), "D") <> 0 OR INSTR(UCASE$(stringmathb$), "E") <> 0 THEN
    GOSUB validate_string_number
    IF stringmathb$ = "invalid number" THEN EXIT SUB
    GOSUB scientific_to_numeric
END IF

IF runningtotal$ = "" THEN
    GOSUB validate_string_number
    IF stringmathb$ = "invalid number" THEN EXIT SUB

    IF LEFT$(stringmathb$, 1) = "-" THEN
        stringmathb$ = MID$(stringmathb$, 2)
        n2sign$ = "-"
    ELSE
        n2sign$ = ""
    END IF
    GOSUB limit_round_convert
    IF stringmathb$ = "overflow" THEN
        n2sign$ = "": PRINT "Validated: "; stringmathb$: EXIT SUB
    END IF
    runningtotal$ = n2sign$ + stringmathb$: n2sign$ = ""
    IF stringmathround$ <> "" THEN runningtotal$ = runningtotal$ + stringmathround$
    PRINT "Validated: "; runningtotal$
    IF INSTR(LCASE$(stringmathb$), "e") <> 0 THEN BEEP: GOSUB scientific_to_numeric
ELSE
    GOSUB validate_string_number
    PRINT "Validated: "; stringmathb$
    IF stringmathb$ = "invalid number" THEN EXIT SUB
    IF INSTR(UCASE$(stringmathb$), "e") <> 0 THEN GOSUB scientific_to_numeric
END IF
IF runningtotal$ <> "" THEN stringmatha$ = runningtotal$

SELECT CASE operator$
    CASE "+", "-"
        string_add_subtract:
        IF INSTR(stringmatha$, ".") <> 0 THEN ' Evaluate sum for decimal fraction.
            sumplace& = LEN(stringmatha$) - INSTR(stringmatha$, ".")
            stringmatha$ = MID$(stringmatha$, 1, INSTR(stringmatha$, ".") - 1) + MID$(stringmatha$, INSTR(stringmatha$, ".") + 1) ' Strip out decimal
        END IF
        IF INSTR(stringmathb$, ".") <> 0 THEN ' Evaluate number for decimal fraction.
            numplace& = LEN(stringmathb$) - INSTR(stringmathb$, ".")
            stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1) + MID$(stringmathb$, INSTR(stringmathb$, ".") + 1) ' Strip out decimal
        END IF
        IF sumplace& > numplace& THEN addsubplace& = sumplace& ELSE addsubplace& = numplace&
        IF sumplace& > addsubplace& THEN
            stringmatha$ = stringmatha$ + STRING$(sumplace& - addsubplace&, "0")
        ELSEIF addsubplace& > sumplace& THEN
            stringmatha$ = stringmatha$ + STRING$(addsubplace& - sumplace&, "0")
        END IF
        IF numplace& > addsubplace& THEN
            stringmathb$ = stringmathb$ + STRING$(numplace& - addsubplace&, "0")
        ELSEIF addsubplace& > numplace& THEN
            stringmathb$ = stringmathb$ + STRING$(addsubplace& - numplace&, "0")
        END IF ' END Decimal evaluations.

        IF LEFT$(stringmatha$, 1) = "-" THEN sign_input$ = "-" ELSE sign_input$ = "+"
        IF LEFT$(stringmathb$, 1) = "-" THEN sign_total$ = "-" ELSE sign_total$ = "+"

        addsubsign% = 0
        SELECT CASE sign_input$ + operator$ + sign_total$
            CASE "+++", "+--"
                operator$ = "+"
                IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
            CASE "++-", "+-+"
                operator$ = "-"
                IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
                IF VAL(stringmathb$) > VAL(stringmatha$) THEN SWAP stringmatha$, stringmathb$: addsubsign% = -1
            CASE "---", "-++"
                operator$ = "-"
                IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
                IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
                IF VAL(stringmathb$) > VAL(stringmatha$) THEN SWAP stringmatha$, stringmathb$ ELSE addsubsign% = -1
            CASE "--+", "-+-"
                operator$ = "+"
                IF LEFT$(stringmatha$, 1) = "-" THEN stringmatha$ = MID$(stringmatha$, 2)
                IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
                addsubsign% = -1
        END SELECT

        IF LEN(stringmatha$) > LEN(stringmathb$) THEN
            stringmathb$ = STRING$(LEN(stringmatha$) - LEN(stringmathb$), "0") + stringmathb$
        ELSEIF LEN(stringmatha$) < LEN(stringmathb$) THEN
            stringmatha$ = STRING$(LEN(stringmathb$) - LEN(stringmatha$), "0") + stringmatha$
        END IF
        addsubx1$ = ""

        SELECT CASE operator$
            CASE "+", "="
                FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
                    addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) + VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
                    IF addsubx1% > 9 THEN addsubx1% = addsubx1% - 10: addsubcarry% = 1 ELSE addsubcarry% = 0
                    addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
                NEXT
                IF addsubcarry% THEN addsubx1$ = "1" + addsubx1$: addsubcarry% = 0
                GOSUB replace_decimal
            CASE "-"
                FOR addsubii& = LEN(stringmatha$) TO 1 STEP -1
                    addsubx1% = VAL(MID$(stringmatha$, addsubii&, 1)) - VAL(MID$(stringmathb$, addsubii&, 1)) + addsubcarry%
                    IF addsubx1% < 0 THEN addsubx1% = addsubx1% + 10: addsubcarry% = -1 ELSE addsubcarry% = 0
                    addsubx1$ = LTRIM$(STR$(addsubx1%)) + addsubx1$
                NEXT
                IF addsubx1$ <> "" AND addsubx1$ <> STRING$(LEN(addsubx1$), "0") THEN GOSUB replace_decimal
                DO UNTIL LEFT$(addsubx1$, 1) <> "0" ' Remove leading zeros.
                    addsubx1$ = MID$(addsubx1$, 2)
                LOOP
                IF addsubx1$ = "" THEN
                    addsubx1$ = "0": addsubsign% = 0
                ELSE
                    IF addsubcarry% THEN addsubx1$ = "-" + addsubx1$: addsubcarry% = 0
                END IF
        END SELECT

        IF addsubsign% THEN
            IF LEFT$(addsubx1$, 1) = "-" THEN addsubx1$ = MID$(addsubx1$, 2) ELSE addsubx1$ = "-" + addsubx1$
        END IF
        stringmatha$ = addsubx1$: addsubx1$ = ""
        IF operationdivision% THEN RETURN
        stringmathb$ = stringmatha$: stringmatha$ = ""
        IF LEFT$(stringmathb$, 1) = "-" THEN
            stringmathb$ = MID$(stringmathb$, 2)
            n2sign$ = "-"
        ELSE
            n2sign$ = ""
        END IF
        GOSUB limit_round_convert
        IF stringmathb$ = "overflow" THEN n2sign$ = "": EXIT SUB
        GOSUB sm_converter
        runningtotal$ = n2sign$ + stringmathb$: n2sign$ = ""

    CASE "*"
        string_multiply:
        fac1$ = stringmatha$: fac2$ = stringmathb$ ' Make numbers whole numbers and remove any - sign.
        IF LEFT$(fac1$, 1) = "-" THEN fac1$ = MID$(fac1$, 2): m_sign% = -1
        IF LEFT$(fac2$, 1) = "-" THEN fac2$ = MID$(fac2$, 2): IF m_sign% THEN m_sign% = 0 ELSE m_sign% = -1
        IF INSTR(fac1$, ".") <> 0 THEN m_decimal_places& = LEN(fac1$) - INSTR(fac1$, "."): fac1$ = MID$(fac1$, 1, INSTR(fac1$, ".") - 1) + MID$(fac1$, INSTR(fac1$, ".") + 1)
        IF INSTR(fac2$, ".") <> 0 THEN m_decimal_places& = m_decimal_places& + LEN(fac2$) - INSTR(fac2$, "."): fac2$ = MID$(fac2$, 1, INSTR(fac2$, ".") - 1) + MID$(fac2$, INSTR(fac2$, ".") + 1)
        FOR m_i& = LEN(fac2$) TO 1 STEP -1 ' Multiply each charter top and bottom.
            m_k& = m_l&
            m_x2$ = MID$(fac2$, m_i&, 1)
            FOR m_j& = LEN(fac1$) TO 1 STEP -1
                m_x1$ = MID$(fac1$, m_j&, 1)
                IF m_product$ <> "" THEN
                    m_add$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0")
                    m_t& = 0: m_xproduct$ = "": m_carry% = 0
                    DO ' Add multiplied characters together.
                        m_x3$ = MID$(m_add$, LEN(m_add$) - m_t&, 1)
                        m_x4$ = MID$(m_product$, LEN(m_product$) - m_t&, 1)
                        IF m_x3$ = "" AND m_x4$ = "" THEN
                            IF m_carry% THEN m_xproduct$ = "1" + m_xproduct$
                            EXIT DO
                        END IF
                        m_g% = VAL(m_x3$) + VAL(m_x4$) + m_carry%
                        IF m_g% >= 10 THEN m_g% = m_g% - 10: m_carry% = 1 ELSE m_carry% = 0
                        m_xproduct$ = LTRIM$(STR$(m_g%)) + m_xproduct$
                        m_t& = m_t& + 1
                    LOOP
                    m_product$ = m_xproduct$: m_xproduct$ = ""
                ELSE
                    m_product$ = LTRIM$(STR$(VAL(m_x1$) * VAL(m_x2$))) + STRING$(m_k&, "0") ' First loop makes variable here.
                END IF
                m_k& = m_k& + 1 ' Adds trailing zeros multiplication
            NEXT
            m_l& = m_l& + 1 ' Used to reset value for m_k& adding one trailing zer for each loop.
        NEXT
        fac1$ = "": fac2$ = "": m_l& = 0: m_k& = 0: m_t& = 0
        IF m_decimal_places& > LEN(m_product$) THEN m_product$ = STRING$(m_decimal_places& - LEN(m_product$), "0") + m_product$ ' Add any leading zeros to a decimal. Ex: .02 * .01 is factored as 002. It needs one leading zero before adding the decimal point, .0002.
        IF m_decimal_places& AND m_product$ <> "0" THEN ' Replace any decimal point.
            m_product$ = MID$(m_product$, 1, LEN(m_product$) - m_decimal_places&) + "." + MID$(m_product$, LEN(m_product$) - m_decimal_places& + 1)
        END IF
        DO UNTIL LEFT$(m_product$, 1) <> "0" ' Remove leading zeros.
            m_product$ = MID$(m_product$, 2)
        LOOP
        IF m_decimal_places& THEN
            DO UNTIL RIGHT$(m_product$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
                m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1)
            LOOP
        END IF
        IF m_product$ = "" THEN m_product$ = "0": m_sign% = 0
        IF RIGHT$(m_product$, 1) = "." THEN m_product$ = MID$(m_product$, 1, LEN(m_product$) - 1) ' Remove decimal from the end of an integer total.
        IF operationdivision% THEN m_sign% = 0: RETURN
        stringmathb$ = m_product$: m_product$ = "": GOSUB limit_round_convert
        IF stringmathb$ = "overflow" THEN EXIT SUB
        GOSUB sm_converter
        runningtotal$ = stringmathb$: stringmathb$ = ""
        IF m_sign% THEN runningtotal$ = "-" + runningtotal$: m_sign% = 0

    CASE "/"
        operationdivision% = -1
        divbuffer& = LEN(stringmathb$) - LEN(stringmatha$)
        IF divbuffer& < 0 THEN divbuffer& = 0
        d2dividend$ = stringmatha$
        d1divisor$ = stringmathb$
        IF LEFT$(d1divisor$, 1) = "0" AND LEN(d1divisor$) = 1 THEN PRINT "Division by zero not allowed.": END
        IF LEFT$(d1divisor$, 1) = "-" THEN divsign% = -1: d1divisor$ = MID$(d1divisor$, 2)
        IF LEFT$(d2dividend$, 1) = "-" THEN
            IF divsign% THEN
                divsign% = 0
            ELSE
                divsign% = -1
            END IF
            d2dividend$ = MID$(d2dividend$, 2)
        END IF
        IF INSTR(d1divisor$, ".") <> 0 THEN
            DO UNTIL RIGHT$(d1divisor$, 1) <> "0"
                d1divisor$ = MID$(d1divisor$, 1, LEN(d1divisor$) - 1) ' Strip off trailing zeros
            LOOP
            divplace& = LEN(d1divisor$) - INSTR(d1divisor$, ".")
            d1divisor$ = MID$(d1divisor$, 1, INSTR(d1divisor$, ".") - 1) + MID$(d1divisor$, INSTR(d1divisor$, ".") + 1) ' Strip off decimal point.
            DO UNTIL LEFT$(d1divisor$, 1) <> "0"
                d1divisor$ = MID$(d1divisor$, 2) ' Strip off leading zeros for divisors smaller than .1
            LOOP
        END IF

        IF INSTR(d2dividend$, ".") <> 0 THEN
            d2dividend$ = d2dividend$ + STRING$(divplace& - LEN(d2dividend$) - INSTR(d2dividend$, "."), "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
            divplace2& = INSTR(d2dividend$, ".")
            DO UNTIL RIGHT$(d2dividend$, 1) <> "0"
                d2dividend$ = MID$(d2dividend$, 1, LEN(d2dividend$) - 1) ' Strip off trailing zeros
            LOOP
            d2dividend$ = MID$(d2dividend$, 1, INSTR(d2dividend$, ".") - 1) + MID$(d2dividend$, INSTR(d2dividend$, ".") + 1) ' Strip off decimal point.
        ELSE
            d2dividend$ = d2dividend$ + STRING$(divplace&, "0") ' Add any zeros based on the length of dividend at decimal - length of divisor at decimal. If less than zero, nothing added.
            divplace& = 0
        END IF
        DO
            DO
                divremainder& = divremainder& + 1: divremainder$ = divremainder$ + MID$(d2dividend$, divremainder&, 1)
                IF MID$(d2dividend$, divremainder&, 1) = "" THEN
                    IF divremainder$ = STRING$(LEN(divremainder$), "0") AND LEN(quotient$) > LEN(d2dividend$) THEN divflag% = -1: EXIT DO
                    divcarry& = divcarry& + 1
                    IF divcarry& = 1 THEN divplace3& = divremainder& - 1
                    IF divcarry& > limit&& + 1 + divbuffer& THEN
                        divflag% = -2: EXIT DO
                    END IF
                    divremainder$ = divremainder$ + "0" ' No more digits to bring down.
                END IF
                IF LEN(divremainder$) > LEN(d1divisor$) OR LEN(divremainder$) = LEN(d1divisor$) AND divremainder$ >= d1divisor$ THEN EXIT DO
                quotient$ = quotient$ + "0"
            LOOP
            IF divflag% THEN divflag% = 0: EXIT DO
            FOR div_i% = 9 TO 1 STEP -1
                stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
                m_product$ = "": GOSUB string_multiply
                tempcutd$ = divremainder$ ' divremainder$ can be 00 or other leading zero values.
                DO
                    IF LEN(tempcutd$) = 1 THEN EXIT DO
                    IF LEFT$(tempcutd$, 1) = "0" THEN
                        tempcutd$ = MID$(tempcutd$, 2)
                    ELSE
                        EXIT DO
                    END IF
                LOOP
                IF LEN(tempcutd$) > LEN(m_product$) OR LEN(tempcutd$) = LEN(m_product$) AND m_product$ <= tempcutd$ THEN EXIT FOR
            NEXT
            quotient$ = quotient$ + LTRIM$(STR$(div_i%))
            stringmatha$ = LTRIM$(STR$(div_i%)): stringmathb$ = d1divisor$
            m_product$ = "": GOSUB string_multiply
            operator$ = "-"
            stringmatha$ = divremainder$
            stringmathb$ = m_product$
            GOSUB string_add_subtract
            divremainder$ = stringmatha$
            operator$ = "/"
        LOOP
        IF divplace& = 0 AND divplace2& = 0 THEN divplace& = divplace3&
        IF divplace2& THEN divplace& = divplace& + divplace2& - 1
        IF quotient$ = "" THEN divplace& = 0 ' dividend is zero.
        IF divplace& OR divplace2& THEN
            quotient$ = MID$(quotient$, 1, divplace&) + "." + MID$(quotient$, divplace& + 1)
            DO UNTIL RIGHT$(quotient$, 1) <> "0"
                quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off trailing zeros
            LOOP
            IF RIGHT$(quotient$, 1) = "." THEN quotient$ = MID$(quotient$, 1, LEN(quotient$) - 1) ' Strip off abandoned decimal.
        END IF
        DO UNTIL LEFT$(quotient$, 1) <> "0"
            quotient$ = MID$(quotient$, 2) ' Strip off leading zeros
        LOOP
        IF quotient$ = "" THEN quotient$ = "0": divsign% = 0
        operationdivision% = 0
        stringmathb$ = quotient$: quotient$ = "": GOSUB limit_round_convert
        IF stringmathb$ = "overflow" THEN divsign% = 0: EXIT SUB
        GOSUB sm_converter
        runningtotal$ = stringmathb$: stringmathb$ = ""
        IF divsign% THEN runningtotal$ = "-" + runningtotal$
END SELECT
IF stringmathround$ <> "" THEN runningtotal$ = runningtotal$ + stringmathround$
EXIT SUB

validate_string_number:
vsn_negcnt& = 0: vsn_poscnt& = 0: vsn_depresent& = 0: decimalcnt& = 0: vsn_numberpresent& = 0: vsn_zerospresent& = 0
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2): sm_sign$ = "-" ELSE sm_sign$ = ""
IF LEFT$(stringmathb$, 1) = "+" THEN IF sm_sign$ <> "-" THEN stringmathb$ = MID$(stringmathb$, 2) ELSE stringmathb$ = "invalid number": RETURN
IF INSTR(UCASE$(stringmathb$), "D") OR INSTR(UCASE$(stringmathb$), "E") THEN ' Evaluate for Scientific Notation.
    FOR sm_i& = 1 TO LEN(stringmathb$)
        validatenum$ = MID$(UCASE$(stringmathb$), sm_i&, 1)
        SELECT CASE validatenum$
            CASE "+"
                IF vsn_depresent& THEN vsn_poscnt& = vsn_poscnt& + 1 ELSE stringmathb$ = "invalid number": RETURN
            CASE "-"
                IF vsn_depresent& THEN vsn_negcnt& = vsn_negcnt& + 1 ELSE stringmathb$ = "invalid number": RETURN
            CASE "0" TO "9"
                vsn_numberpresent& = -1
            CASE "D", "E"
                vsn_depresent& = vsn_depresent& + 1
                IF decimalcnt& = 0 AND sm_i& <> 2 OR vsn_depresent& > 1 OR vsn_numberpresent& = 0 OR vsn_negcnt& > 1 OR vsn_poscnt& > 1 OR vsn_negcnt& = 1 AND vsn_poscnt& >= 1 THEN vsn_numberpresent& = 0: EXIT FOR
                vsn_numberpresent& = 0
                MID$(stringmathb$, sm_i&, 1) = "e" ' Standardize
            CASE "."
                decimalcnt& = decimalcnt& + 1
                IF sm_i& <> 2 THEN vsn_numberpresent& = 0: EXIT FOR
            CASE ELSE
                vsn_numberpresent& = 0: EXIT FOR
        END SELECT
    NEXT
    IF decimalcnt& = 0 THEN stringmathb$ = MID$(stringmathb$, 1, 1) + "." + MID$(stringmathb$, 2) ' Standardize "."
    IF vsn_numberpresent& = 0 OR vsn_negcnt& = 1 AND vsn_poscnt& = 1 OR decimalcnt& > 1 OR INSTR(stringmathb$, ".") <> 2 THEN stringmathb$ = "invalid number": RETURN
    vsn_depresent& = INSTR(stringmathb$, "e")
    sm_x$ = MID$(stringmathb$, vsn_depresent& + 1, 1) ' Standardize exponent "+" these two lines.
    IF sm_x$ <> "+" AND sm_x$ <> "-" THEN stringmathb$ = MID$(stringmathb$, 1, vsn_depresent&) + "+" + MID$(stringmathb$, vsn_depresent& + 1)
    IF MID$(stringmathb$, vsn_depresent& + 2, 1) = "0" THEN
        IF MID$(stringmathb$, vsn_depresent& + 3, 1) <> "" THEN stringmathb$ = "invalid number": RETURN ' No leading zeros allowed in exponent notation.
    END IF
    jjed& = INSTR(stringmathb$, "e") ' Get position of notation.
    valexpside$ = MID$(stringmathb$, jjed&) ' These two lines break up into number and notation
    stringmathb$ = MID$(stringmathb$, 1, jjed& - 1) ' stringmathb$ is +- single digit whole number, decimal point and decimal number. valexpside$ is notation, sign and exponent.
    DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Remove any trailing zeros for number. Example 1.0d3 or 1.0000d3, etc.
        stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
    LOOP
    IF VAL(MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1)) = 0 THEN
        IF RIGHT$(stringmathb$, 1) = "." THEN
            stringmathb$ = "0.e+0" ' Handles all types of zero entries.
        ELSE
            stringmathb$ = "invalid number": RETURN
        END IF
        RETURN
    END IF
    stringmathb$ = sm_sign$ + stringmathb$ + valexpside$
    RETURN
ELSE
    FOR sm_i& = 1 TO LEN(stringmathb$)
        validatenum$ = MID$(stringmathb$, sm_i&, 1)
        SELECT CASE validatenum$
            CASE "."
                decimalcnt& = decimalcnt& + 1
            CASE "0"
                vsn_zerospresent& = -1
            CASE "1" TO "9"
                vsn_numberpresent& = -1
            CASE "$"
            CASE ELSE
                stringmathb$ = "invalid number": RETURN
        END SELECT
    NEXT
    IF decimalcnt& > 1 OR vsn_negcnt& > 1 OR vsn_poscnt& > 1 OR vsn_negcnt& >= 1 AND vsn_poscnt& >= 1 THEN
        stringmathb$ = "invalid number": RETURN
    END IF
    IF INSTR(stringmathb$, "$") THEN GOSUB currency_validate
    IF INSTR(stringmathb$, ",") THEN
        GOSUB comma_validation
        IF stringmathb$ = "invalid number" THEN RETURN
        GOSUB comma_removal
    END IF
    IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
    DO UNTIL LEFT$(stringmathb$, 1) <> "0" ' Strip off any leading zeros.
        stringmathb$ = MID$(stringmathb$, 2)
    LOOP
    stringmathb$ = sm_sign$ + stringmathb$
    IF INSTR(stringmathb$, ".") THEN
        DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Strip off any trailing zeros in a decimal.
            stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
        LOOP
    END IF
    IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
    IF vsn_numberpresent& = 0 THEN
        IF vsn_zerospresent& THEN
            stringmathb$ = "0"
        ELSE
            stringmathb$ = "invalid number"
        END IF
    END IF
END IF
RETURN

' Convert to commas, currency, S.N., etc.
sm_converter:
IF comma_display% THEN GOSUB comma_placement
IF currency_display% THEN GOSUB currency_convert
IF snconvert% THEN GOSUB numeric_to_scientific
RETURN

' Add in commas.
comma_placement:
GOSUB comma_prep
sm_i& = 0: sm_j& = 0: sm_seed& = 0
sm_seed& = LEN(temp_stringmathb1$) MOD 3: IF sm_seed& = 0 THEN sm_seed& = 3
sm_m1& = LEN(temp_stringmathb1$)
sm_m2& = (LEN(temp_stringmathb1$) - 1) \ 3
sm_replace$ = SPACE$(sm_m1& + sm_m2&)
DO WHILE sm_i& < sm_m1&
    MID$(sm_replace$, sm_j& + 1, sm_seed& + 1) = MID$(temp_stringmathb1$, sm_i& + 1, sm_seed&) + ","
    sm_i& = sm_i& + sm_seed&: sm_j& = sm_j& + sm_seed& + 1: sm_seed& = 3
LOOP
sm_replace$ = RTRIM$(sm_replace$)
IF RIGHT$(sm_replace$, 1) = "," THEN
    stringmathb$ = MID$(sm_replace$, 1, LEN(sm_replace$) - 1)
ELSE
    stringmathb$ = sm_replace$
END IF
sm_replace$ = "": temp_stringmathb1$ = ""
RETURN

' Validate comma entry.
comma_validation:
GOSUB comma_prep
IF INSTR(temp_stringmathb2$, ",") <> 0 OR temp_stringmathb1$ = STRING$(LEN(temp_stringmathb1$), ",") THEN
    stringmathb$ = "invalid number" ' Decimal part has comma or entry is all commas.
ELSE
    FOR sm_i& = LEN(temp_stringmathb1$) TO 1 STEP -1
        sm_j% = sm_j% + 1
        IF sm_j% = 4 THEN
            IF MID$(temp_stringmathb1$, sm_i&, 1) <> "," THEN stringmathb$ = "invalid number": EXIT FOR
            sm_j% = 0
        END IF
    NEXT
    IF stringmathb$ <> "invalid number" THEN
        stringmathb$ = sm_sign$ + temp_stringmathb1$ + temp_stringmathb2$
    END IF
END IF
temp_stringmathb1$ = "": temp_stringmathb2$ = "": sm_i& = 0: sm_j% = 0: sm_sign$ = "": sm_dollar$ = ""
RETURN

comma_removal:
sm_i& = 0: sm_j& = 0: sm_seed& = 0
sm_replace$ = SPACE$(LEN(stringmathb$))
DO
    sm_i& = INSTR(sm_seed& + 1, stringmathb$, ",")
    IF sm_i& = 0 THEN EXIT DO
    MID$(sm_replace$, sm_j& + 1, sm_i& - sm_seed& + 1) = MID$(stringmathb$, sm_seed& + 1, sm_i& - sm_seed& - 1)
    sm_j& = sm_j& + sm_i& - sm_seed& - 1
    sm_seed& = sm_i&
LOOP
stringmathb$ = RTRIM$(sm_replace$) + MID$(stringmathb$, sm_seed& + 1): sm_replace$ = ""
RETURN

comma_prep:
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2): sm_sign$ = "-"
temp_stringmathb1$ = stringmathb$: stringmathb$ = ""
IF INSTR(temp_stringmathb1$, ".") THEN
    temp_stringmathb2$ = MID$(temp_stringmathb1$, INSTR(temp_stringmathb1$, ".")) ' Decimal part
    temp_stringmathb1$ = MID$(temp_stringmathb1$, 1, INSTR(temp_stringmathb1$, ".") - 1) ' Non-decimal part
END IF
IF LEFT$(temp_stringmathb1$, 1) = "$" THEN temp_stringmathb1$ = MID$(temp_stringmathb1$, 2): sm_dollar$ = "$"
RETURN

currency_validate:
IF LEFT$(stringmathb$, 2) = "$-" OR LEFT$(stringmathb$, 2) = "$+" THEN stringmathb$ = "invalid number": RETURN
IF LEFT$(stringmathb$, 1) = "$" THEN stringmathb$ = MID$(stringmathb$, 2)
IF INSTR(stringmathb$, "$") THEN stringmathb$ = "invalid number": RETURN
sm_dollar$ = "$"
RETURN

currency_convert:
IF INSTR(UCASE$(stringmathb$), "D") <> 0 OR INSTR(UCASE$(stringmathb$), "E") <> 0 THEN GOSUB scientific_to_numeric
IF INSTR(stringmathb$, ",") = 0 THEN GOSUB comma_placement
IF INSTR(stringmathb$, ".") = 0 THEN stringmathb$ = stringmathb$ + ".00"
IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = stringmathb$ + "00"
IF MID$(stringmathb$, LEN(stringmathb$) - 2, 1) <> "." THEN stringmathb$ = stringmathb$ + "0"
IF MID$(stringmathb$, LEN(stringmathb$) - 2, 1) <> "." THEN stringmathb$ = "invalid number": RETURN
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2)
stringmathb$ = sm_sign$ + "$" + stringmathb$
RETURN

numeric_to_scientific:
IF LEFT$(stringmathb$, 1) = "-" THEN stringmathb$ = MID$(stringmathb$, 2): n2sign$ = "-"
IF INSTR(stringmathb$, ".") = 0 THEN exponentvalue&& = LEN(stringmathb$) - 1 ELSE exponentvalue&& = INSTR(stringmathb$, ".") - 2 ' Exponent is one less than number of digits for whole number an two less than the placement of the decimal point for a fraction.
stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1) + MID$(stringmathb$, INSTR(stringmathb$, ".") + 1)
IF LEFT$(stringmathb$, 1) = "0" AND LEN(stringmathb$) > 1 OR exponentvalue&& = -1 THEN
    DO UNTIL LEFT$(stringmathb$, 1) <> "0" ' Remove leading zeros to consider rounding.
        stringmathb$ = MID$(stringmathb$, 2)
        exponentvalue&& = exponentvalue&& - 1
    LOOP
    esign$ = "-"
ELSE
    esign$ = "+"
END IF
DO UNTIL RIGHT$(stringmathb$, 1) <> "0" ' Remove trailing zeros.
    stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
LOOP
IF stringmathb$ = "" THEN stringmathb$ = "0": esign$ = "+": exponentvalue&& = 0
stringmathb$ = LEFT$(stringmathb$, 1) + "." + MID$(stringmathb$, 2)
IF stringmathb$ = "0." THEN n2sign$ = "": esign$ = "+"
stringmathb$ = stringmathb$ + "e" + esign$ + LTRIM$(STR$(ABS(exponentvalue&&))) ' S.N formed here.
IF stringmathb$ <> "overflow" THEN
    stringmathb$ = n2sign$ + stringmathb$
END IF
n2sign$ = "": esign$ = "": exponentvalue&& = 0
RETURN

scientific_to_numeric:
IF INSTR(UCASE$(stringmathb$), "D") THEN MID$(stringmathb$, INSTR(UCASE$(stringmathb$), "D"), 1) = "e"
IF MID$(stringmathb$, INSTR(stringmathb$, "e") + 2) = "0" THEN ' The numeric value is the number without the zero exponent.
    stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, "e") - 1)
    IF RIGHT$(stringmathb$, 1) = "." THEN stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
    RETURN
ELSE
    IF LEFT$(stringmathb$, 1) = "-" THEN stn_sign$ = "-": stringmathb$ = MID$(stringmathb$, 2)
    stringmathb$ = MID$(stringmathb$, 1, INSTR(stringmathb$, ".") - 1) + MID$(stringmathb$, INSTR(stringmathb$, ".") + 1) ' Remove decimal point.
    stn_i& = INSTR(stringmathb$, "e") - 1 ' Length of the numric part.
    IF MID$(stringmathb$, INSTR(stringmathb$, "e") + 1, 1) = "-" THEN
        stringmathb$ = "." + STRING$(VAL(MID$(stringmathb$, stn_i& + 3)) - 1, "0") + MID$(stringmathb$, 1, stn_i&) ' Decimal point followed by exponent value in zeros added in front of numeric part.
    ELSE
        IF stn_i& - 1 > VAL(MID$(stringmathb$, stn_i& + 3)) THEN stn_point$ = "." ' - 1 for decimal place. Ex 2.034d+2 is 2034 here where 3 places to the right . could be moved before . disappears. > so no trailing decimal results.
        stringmathb$ = MID$(MID$(stringmathb$, 1, stn_i&), 1, VAL(MID$(stringmathb$, stn_i& + 3)) + 1) + stn_point$ + MID$(MID$(stringmathb$, 1, stn_i&), VAL(MID$(stringmathb$, stn_i& + 3)) + 2, stn_i& - VAL(MID$(stringmathb$, stn_i& + 3)) - 1) + STRING$(VAL(MID$(stringmathb$, stn_i& + 2)) - (stn_i& - 1), "0")
    END IF
END IF
IF stringmathb$ = "0" THEN stn_sign$ = ""
stringmathb$ = stn_sign$ + stringmathb$
stn_sign$ = "": stn_point$ = ""
RETURN

limit_round_convert:
' Try SN if whole number is too large (as it may be trailing zeros) or decimal is beyond limit.
IF LEFT$(stringmathb$, 2) = ".0" AND LEN(stringmathb$) > limit&& + 1 OR INSTR(stringmathb$, ".") > limit&& + 1 OR INSTR(stringmathb$, ".") = 0 AND LEN(stringmathb$) > limit&& THEN
    IF limit&& > 1 THEN
        GOSUB numeric_to_scientific ' Retry as S.N.
        IF LEN(stringmathb$) > limit&& + 3 THEN ' Needs rounding.
            snotation$ = MID$(stringmathb$, INSTR(UCASE$(stringmathb$), "E"))
            exponentvalue&& = VAL(MID$(snotation$, 2)) ' Get positive or negative sign.
            snexponent$ = MID$(stringmathb$, INSTR(UCASE$(stringmathb$), "E") + 2)
            stringmathb$ = MID$(stringmathb$, 1, INSTR(UCASE$(stringmathb$), "E") - 1)
            '''IF LEN(stringmathb$) + LEN(snexponent$) > limit&& + 1 AND exponentvalue&& >= limit&& THEN BEEP
            IF exponentvalue&& >= limit&& THEN
                stringmathb$ = MID$(stringmathb$, 1, exponentvalue&& + 3)
            ELSE
                stringmathb$ = MID$(stringmathb$, 1, limit&& - LEN(snexponent$) + 2)
            END IF
            GOSUB string_rounding_method
            IF LEFT$(stringmathb$, 3) = "10." THEN
                stringmathb$ = "1." + MID$(stringmathb$, 4)
                ' Add one to the exponent.
                FOR round_i& = LEN(snexponent$) TO 1 STEP -1
                    round_x$ = CHR$(ASC(MID$(snexponent$, round_i&, 1)) + 1)
                    IF round_x$ <> CHR$(47) THEN ' Decimal point + 1. Ignore.
                        IF round_x$ = CHR$(58) THEN
                            MID$(snexponent$, round_i&, 1) = "0": carry$ = "1"
                        ELSE
                            MID$(snexponent$, round_i&, 1) = round_x$: carry$ = "": EXIT FOR
                        END IF
                    END IF
                NEXT
                snexponent$ = carry$ + snexponent$: carry$ = ""
            END IF
            stringmathb$ = stringmathb$ + MID$(snotation$, 1, 2) + snexponent$
            IF LEN(snexponent$) + LEN(MID$(stringmathb$, 1, INSTR(UCASE$(stringmathb$), "E") - 1)) > limit&& + 1 THEN
                stringmathb$ = "overflow"
            END IF
            exponentvalue&& = 0
        END IF
    ELSE
        IF INSTR(stringmathb$, ".") > 0 AND INSTR(stringmathb$, ".") <= limit&& THEN
            stringmathb$ = MID$(stringmathb$, 1, limit&& + 2)
            IF round_total% = -1 AND RIGHT$(stringmathb$, 1) > "4" THEN
                GOSUB string_rounding_method
            ELSE
                stringmathb$ = MID$(stringmathb$, 1, limit&& + 1)
                IF show_rounding% THEN stringmathround$ = "r"
            END IF
        ELSE
            stringmathb$ = "overflow"
        END IF
    END IF
    RETURN
END IF
IF LEN(stringmathb$) > limit&& AND INSTR(stringmathb$, ".") = 0 OR LEN(stringmathb$) > limit&& + 1 AND INSTR(stringmathb$, ".") <> 0 THEN
    IF INSTR(stringmathb$, ".") = 0 THEN
        stringmathb$ = MID$(stringmathb$, 1, limit&& + 1)
    ELSE
        stringmathb$ = MID$(stringmathb$, 1, limit&& + 2)
    END IF
    GOSUB string_rounding_method
    IF LEN(stringmathb$) > limit&& + lrc_decimalpoint& THEN ' Ex: limit&& = 4 9999.9 1.e+4
        GOSUB numeric_to_scientific
    ELSE
        IF LEN(stringmathb$) > limit&& + lrc_decimalpoint& THEN stringmathb$ = "overflow"
    END IF
END IF
RETURN

replace_decimal:
IF addsubplace& THEN
    addsubx1$ = STRING$(addsubplace& - LEN(addsubx1$), "0") + addsubx1$
    addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - addsubplace&) + "." + MID$(addsubx1$, LEN(addsubx1$) - addsubplace& + 1)
    DO UNTIL RIGHT$(addsubx1$, 1) <> "0" ' Remove trailing zeros in a decimal sum.
        addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1)
        addsubplace& = addsubplace& - 1
    LOOP
    IF RIGHT$(addsubx1$, 1) = "." THEN addsubx1$ = MID$(addsubx1$, 1, LEN(addsubx1$) - 1) ' Number is now an integer.
END IF
RETURN

string_rounding_method:
IF INSTR(stringmathb$, ".") THEN lrc_decimalpoint& = 1 ELSE lrc_decimalpoint& = 0
IF MID$(stringmathb$, LEN(stringmathb$), 1) > "4" THEN
    FOR round_i& = LEN(stringmathb$) - 1 TO 1 STEP -1
        round_x$ = CHR$(ASC(MID$(stringmathb$, round_i&, 1)) + 1)
        IF round_x$ <> CHR$(47) THEN ' Decimal point + 1. Ignore.
            IF round_x$ = CHR$(58) THEN
                MID$(stringmathb$, round_i&, 1) = "0": carry$ = "1"
            ELSE
                MID$(stringmathb$, round_i&, 1) = round_x$: carry$ = "": EXIT FOR
            END IF
        END IF
    NEXT
    stringmathb$ = carry$ + MID$(stringmathb$, 1, LEN(stringmathb$) - 1): carry$ = ""
    IF show_rounding% THEN stringmathround$ = "R"
ELSE
    stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
    IF show_rounding% THEN stringmathround$ = "r"
END IF

IF lrc_decimalpoint& THEN
    DO UNTIL RIGHT$(stringmathb$, 1) <> "0"
        stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1)
    LOOP
    IF stringmathb$ = "" OR stringmathb$ = "." THEN stringmathb$ = "0": lrc_decimalpoint& = 0
    IF RIGHT$(stringmathb$, 1) = "." AND exponentvalue&& = 0 THEN
        stringmathb$ = MID$(stringmathb$, 1, LEN(stringmathb$) - 1): lrc_decimalpoint& = 0
    END IF
END IF
RETURN
END SUB
So the prompts...

Limit Display - Input how many digits you want displayed to the screen.
Use Rounding Y/N - Sef explanitory.
Display in Scientitic Notation Y/N - Sef explanitory.
Display in Dollars and Cents Y/N - Sef explanitory.
Display Results with Commas Y/N- Sef explanitory.

Number - Input the first number. It will give a validation message after input.
Operator +-/* - Input the symbol to add, subtract, divide, or multiply.
Number - Input the nextnumber to complete the operation. It ouputs both the numeric and string answer.


Pete
Reply
#8
@Jack

Very cool!

That's meaningful. It shows the design was made to simply call the appropriate sub-routine. Honestly, that first demo didn't address practical usage, but this one does.

Thanks!

Pete
Reply
#9
(07-28-2022, 04:02 PM)Pete Wrote: I put this together a few years back for +-?* strimg math routines.

What I didn't include was a way to carry repeating decimals (repetends). So 1 / 3 * 3 will result in .9... instead of 1, just as .3... * 3 would result in .9...

So I would consider it unfinished for use in a calculator.

still interesting, thanks for sharing. I'm using right shifting and left shifting to handle division and multiplication as much as possible, just using base 10 instead of binary. My code still is buggy and not clean enough to share yet.
Reply
#10
@Jack - Your first version reminds me of the Fibonacci sequence:

Code: (Select All)
'Fibonaccizahl - 29. Juli 2022
'https://de.wikipedia.org/wiki/Fibonacci-Folge
'https://en.wikipedia.org/wiki/Fibonacci_number

Option _Explicit

Dim x, y As Long
Dim i, n As Integer

x = 1: y = 1: i = 1
Cls
Locate 3, 3
Print "Berechnet iterativ die Fibonaccizahl."

Locate 5, 3
Input "Geben Sie eine Zahl ein: ", n

Locate 7, 3
If n > 33 Then
  Print "Nur Eingaben bis 33!"
  GoTo Ende
End If

If n = 0 Then
  Print Using "Die Fibonaccizahl von # ist: #"; n, 1
  GoTo Ende
ElseIf n = 1 Then
  Print Using "Die Fibonaccizahl von # ist: #"; n, 1
  GoTo Ende
ElseIf n = 2 Then
  Print Using "Die Fibonaccizahl von # ist: 1 1 #"; n, n
  GoTo Ende
End If

If n > 2 Then
  Print "0 1 1 ";
  While i < n
    x = x + y: y = x - y: i = i + 1
    Print " "; x;
  Wend
End If

Print: Print
Locate , 3
Print Using "Die Fibonaccizahl von ## ist: ###,#####"; n, x

Ende:
End
Reply




Users browsing this thread: 6 Guest(s)