Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Click Away Balls
#1
Hey @Dav, 

Remember this one?
Code: (Select All)
_Title "Click Away Balls" '.bas v1.1
'new: speed increases, added timer, clicking bad choice restarts.
'by Dav, DEC/2020

'Click on balls in order, starting at 1 untill all gone,
'before the timer runs out.  Clicking wrong number restarts.

Randomize Timer
Screen _NewImage(800, 600, 32)
_Delay .25
_ScreenMove _Middle

f = _LoadFont("arial.ttf", 30): _Font f
_PrintMode _KeepBackground

balls = 15: size = 40: speed = 3

ReDim BallX(balls), BallY(balls), BallDx(balls), BallDy(balls), BallSize(balls), BallShow(balls), BallC(balls) As _Unsigned Long

w = _Width: h = _Height: w2 = _Width / 2: h2 = _Height / 2

restart:

'Generate random ball data
For B = 1 To balls
    BallSize(B) = 40 + (Rnd * 30)
    BallX(B) = BallSize(B) + Rnd * (w - 2 * BallSize(B)): BallY(B) = BallSize(B) + Rnd * (h - 2 * BallSize(B))
    a = Rnd * _Pi(2): Ballspeed = 2 + B
    BallDx(B) = Ballspeed * Cos(a): BallDy(B) = Ballspeed * Sin(a)
    BallShow(B) = 1: BallC(B) = _RGB32(Rnd * 255, Rnd * 255, Rnd * 255)
Next

curball = 1

gametime = Timer

timelimit = 30

Do
    Cls
    'compute ball movement
    For t = 1 To balls
        BallX(t) = BallX(t) + BallDx(t) 'move ball then make sure in bounds
        BallY(t) = BallY(t) + BallDy(t)
        If BallX(t) > w - BallSize(t) Then BallDx(t) = -BallDx(t): BallX(t) = w - BallSize(t)
        If BallX(t) < BallSize(t) Then BallDx(t) = -BallDx(t): BallX(t) = BallSize(t)
        If BallY(t) > h - BallSize(t) Then BallDy(t) = -BallDy(t): BallY(t) = h - BallSize(t)
        If BallY(t) < BallSize(t) Then BallDy(t) = -BallDy(t): BallY(t) = BallSize(t)
    Next
    'draw background
    t = Timer
    For x = 0 To w Step 4
        For y = 0 To h Step 4
            r = Sin(1.1 * t) * h2 - y + h2
            'PSET (x, y), _RGB(r, r - y, -r)
            Line (x, y)-Step(3, 3), _RGB(r, r - y, -r), BF
        Next
        t = t + .01
        GoSub GetMouseClick
    Next

    If gameover = 1 Then
        Play "o2l16cegagfefgabgc3l4"
        Sleep 3
        GoTo restart
    End If

    'draw balls
    For i = 1 To balls
        If BallShow(i) = 1 Then
            drawBall BallX(i), BallY(i), BallSize(i), BallC(i)
            _PrintString (BallX(i) - 15, BallY(i) - 15), Right$("0" + _Trim$(Str$(i)), 2)
        End If
    Next

    Locate 1, 1: Print "Click ball.."; curball;
    Locate 2, 1: Print timelimit - Int(Timer - gametime);
    _Display: _Limit 30

    'If click on one ball (no overlayed oned) remove it
    If found = 1 Then
        If firstball = curball Then
            'erase ball
            drawBall BallX(firstball), BallY(firstball), BallSize(firstball), BallC(firstball)
            BallShow(firstball) = 0
            Play "mbl32o2ceg"
            _Display: _Delay .05
            curball = curball + 1
            found = 0


        Else
            found = found + 1
            lastfound = firstball
        End If
    End If

    ''If click over several balls, remove top one
    'IF found > 1 THEN
    '    'BallShow(lastfound) = 0
    '    drawball BallX(lastfound), BallY(lastfound), BallSize(lastfound), 255, 200, 100
    '    _PRINTSTRING (BallX(lastfound) - 15, BallY(lastfound) - 15), STR$(lastfound)
    '    _DISPLAY: PLAY "mbl16o2fbfbl8f"
    '    found = 0
    '    _DELAY .5
    '    GOTO restart
    'END IF

    'check if all clicked
    anyleft = 0
    For c = 1 To balls
        If BallShow(c) = 1 Then anyleft = anyleft + 1
    Next
    If anyleft = 0 Then
        gameover = 1
    End If

    If Timer - gametime > timelimit Then
        Play "mbo1l4dl8ddl4dl8feeddc#l2d"
        Sleep 3
        GoTo restart
    End If

Loop

End

'==============
GetMouseClick:
'==============

mi = _MouseInput
If _MouseButton(1) = 0 Then done = 0
If _MouseButton(1) And done = 0 Then
    mx = _MouseX: my = _MouseY
    found = 0
    For m = 1 To balls
        If BallShow(m) = 1 Then
            If Sqr((mx - BallX(m)) ^ 2 + (my - BallY(m)) ^ 2) < BallSize(m) Then
                If found = 0 Then firstball = m
                found = found + 1
                If found > 1 Then
                    lastfound = m
                End If
            End If
        End If
    Next
    done = 1
End If

Return


Sub drawBall (x, y, r, c As _Unsigned Long)
    Dim rred As Long, grn As Long, blu As Long, rr As Long, f
    rred = _Red32(c): grn = _Green32(c): blu = _Blue32(c)
    For rr = r To 0 Step -1
        f = 1 - rr / r
        fcirc x, y, rr, _RGB32(rred * f, grn * f, blu * f)
    Next
End Sub

Sub fcirc (CX As Integer, CY As Integer, R As Integer, C As _Unsigned Long)
    Dim Radius As Integer, RadiusError As Integer
    Dim X As Integer, Y As Integer
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub
b = b + ...
Reply
#2
(04-25-2022, 11:14 PM)bplus Wrote: Hey @Dav, 

Remember this one?

Oh yeah, now I do!  That's the one you showed me how to get a mouse click in a circle. I had been doing it in a square, which isn't ideal for clicking a ball. The line you added...
IF SQR((mx - BallX(m)) ^ 2 + (my - BallY(m)) ^ 2) < BallSize(m) ...
...was the ticket.

By the way, thanks for all the times you helped my code at the old forum!

- Dav

Find my programs here in Dav's QB64 Corner
Reply
#3
And thank you for all your great games! @Dav
b = b + ...
Reply
#4
Major overhaul of this code because it did not work well on my dinosaur laptop in Linux:
Code: (Select All)
_Title "Click Away Balls" ' 2022-05-13 needs arial.ttf font
' new: speed increases, added timer by Dav, DEC/2020
' 2022-05-13 fix so that lowest balls are drawn, overhaul code b+

' ===========================================================================================================

'       Click on balls in order, starting at 1 until all gone, before the timer runs out.

'        Hints: the lower the ball # the slower it moves, click into place ball is moving

' ===========================================================================================================

Randomize Timer
Screen _NewImage(800, 600, 32)
_Delay .25
_ScreenMove _Middle
f = _LoadFont("arial.ttf", 30)
_Font f
_PrintMode _KeepBackground

balls = 15: size = 40: speed = 3
Dim BallX(balls), BallY(balls), BallDx(balls), BallDy(balls), BallSize(balls), BallShow(balls), BallC(balls) As _Unsigned Long
w = _Width: h = _Height: w2 = _Width / 2: h2 = _Height / 2

restart:

'Generate random ball data
For B = balls To 1 Step -1
    BallSize(B) = 40 + (Rnd * 30)
    BallX(B) = BallSize(B) + Rnd * (w - 2 * BallSize(B))
    BallY(B) = BallSize(B) + Rnd * (h - 2 * BallSize(B))
    a = Rnd * _Pi(2): Ballspeed = 2 + B
    BallDx(B) = Ballspeed * Cos(a)
    BallDy(B) = Ballspeed * Sin(a)
    BallShow(B) = 1
    BallC(B) = _RGB32(55 + Rnd * 200, 55 + Rnd * 200, 55 + Rnd * 200)
Next

' initialize
curBall = 1: gametime = Timer: timelimit = 35
Do
    Cls
    'compute ball movement
    For t = balls To 1 Step -1
        BallX(t) = BallX(t) + BallDx(t) 'move ball then make sure in bounds
        BallY(t) = BallY(t) + BallDy(t)
        If BallX(t) > w - BallSize(t) Then BallDx(t) = -BallDx(t): BallX(t) = w - BallSize(t)
        If BallX(t) < BallSize(t) Then BallDx(t) = -BallDx(t): BallX(t) = BallSize(t)
        If BallY(t) > h - BallSize(t) Then BallDy(t) = -BallDy(t): BallY(t) = h - BallSize(t)
        If BallY(t) < BallSize(t) Then BallDy(t) = -BallDy(t): BallY(t) = BallSize(t)
    Next

    ' curBall clicked
    While _MouseInput: Wend
    mb = _MouseButton(1): mx = _MouseX: my = _MouseY
    If mb Then
        If Sqr((mx - BallX(curBall)) ^ 2 + (my - BallY(curBall)) ^ 2) < BallSize(curBall) Then
            BallShow(curBall) = 0
            Play "mbl32o2ceg"
            curBall = curBall + 1
        End If
    End If

    'draw all stuff
    For x = 0 To w Step 4
        For y = 0 To h Step 4
            r = Sin(1.1 * t) * h2 - y + h2
            Line (x, y)-Step(3, 3), _RGB(r, r - y, -r), BF
        Next
    Next
    For i = balls To 1 Step -1
        If BallShow(i) = 1 Then
            drawBall BallX(i), BallY(i), BallSize(i), BallC(i)
            _PrintString (BallX(i) - 15, BallY(i) - 15), Right$("0" + _Trim$(Str$(i)), 2)
        End If
    Next
    Locate 1, 1: Print "Click ball.."; curBall;
    Locate 2, 1: Print timelimit - Int(Timer - gametime);
    _Display
    _Limit 30

    ' game over ?
    If curBall > 15 Then ' success
        Play "o2l16cegagfefgabgc3l4"
        _Delay 2
        GoTo restart
    ElseIf Timer - gametime > timelimit Then ' fail
        Play "mbo1l4dl8ddl4dl8feeddc#l2d"
        _Delay 2
        GoTo restart
    End If
Loop

Sub drawBall (x, y, r, c As _Unsigned Long)
    Dim rred As Long, grn As Long, blu As Long, rr As Long, f
    rred = _Red32(c): grn = _Green32(c): blu = _Blue32(c)
    For rr = r To 0 Step -1
        f = 1 - rr / r
        fcirc x, y, rr, _RGB32(rred * f, grn * f, blu * f)
    Next
End Sub

Sub fcirc (CX As Integer, CY As Integer, R As Integer, C As _Unsigned Long)
    Dim Radius As Integer, RadiusError As Integer
    Dim X As Integer, Y As Integer
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub

Plus a copy of arial.ttf can be found in Sudoku Game App, bplus corner.
b = b + ...
Reply
#5
We don't need no font to draw larger numbers! Just a nice little Sub:
Code: (Select All)
_Title "Click Away Balls" ' 2022-05-13 needs arial.ttf font
' new: speed increases, added timer by Dav, DEC/2020
' 2022-05-13 fix so that lowest balls are drawn, overhaul code b+

' ===========================================================================================================

'       Click on balls in order, starting at 1 until all gone, before the timer runs out.

'        Hints: the lower the ball # the slower it moves, click into place ball is moving

' ===========================================================================================================

Randomize Timer
Screen _NewImage(800, 600, 32)
_Delay .25
_ScreenMove _Middle
_PrintMode _KeepBackground

balls = 15: size = 40: speed = 3
Dim BallX(balls), BallY(balls), BallDx(balls), BallDy(balls), BallSize(balls), BallShow(balls), BallC(balls) As _Unsigned Long
w = _Width: h = _Height: w2 = _Width / 2: h2 = _Height / 2

restart:

'Generate random ball data
For B = balls To 1 Step -1
    BallSize(B) = 40 + (Rnd * 30)
    BallX(B) = BallSize(B) + Rnd * (w - 2 * BallSize(B))
    BallY(B) = BallSize(B) + Rnd * (h - 2 * BallSize(B))
    a = Rnd * _Pi(2): Ballspeed = 2 + B
    BallDx(B) = Ballspeed * Cos(a)
    BallDy(B) = Ballspeed * Sin(a)
    BallShow(B) = 1
    BallC(B) = _RGB32(100 + Rnd * 150, 100 + Rnd * 150, 100 + Rnd * 150)
Next

' initialize
curBall = 1: gametime = Timer: timelimit = 35
Do
    Cls
    'compute ball movement
    For t = balls To 1 Step -1
        BallX(t) = BallX(t) + BallDx(t) 'move ball then make sure in bounds
        BallY(t) = BallY(t) + BallDy(t)
        If BallX(t) > w - BallSize(t) Then BallDx(t) = -BallDx(t): BallX(t) = w - BallSize(t)
        If BallX(t) < BallSize(t) Then BallDx(t) = -BallDx(t): BallX(t) = BallSize(t)
        If BallY(t) > h - BallSize(t) Then BallDy(t) = -BallDy(t): BallY(t) = h - BallSize(t)
        If BallY(t) < BallSize(t) Then BallDy(t) = -BallDy(t): BallY(t) = BallSize(t)
    Next

    ' curBall clicked
    While _MouseInput: Wend
    mb = _MouseButton(1): mx = _MouseX: my = _MouseY
    If mb Then
        If Sqr((mx - BallX(curBall)) ^ 2 + (my - BallY(curBall)) ^ 2) < BallSize(curBall) Then
            BallShow(curBall) = 0
            Play "mbl32o2ceg"
            curBall = curBall + 1
        End If
    End If

    'draw all stuff
    For x = 0 To w Step 4
        For y = 0 To h Step 4
            r = Sin(1.1 * t) * h2 - y + h2
            Line (x, y)-Step(3, 3), _RGB(r, r - y, -r), BF
        Next
    Next
    For i = balls To 1 Step -1
        If BallShow(i) = 1 Then
            drawBall BallX(i), BallY(i), BallSize(i), BallC(i)
            Text BallX(i) - 15, BallY(i) - 15, 30, &HFFFFFFFF, Right$("0" + _Trim$(Str$(i)), 2)
            '_PrintString (BallX(i) - 15, BallY(i) - 15), Right$("0" + _Trim$(Str$(i)), 2)
        End If
    Next
    Locate 1, 1: Print "Click ball.."; curBall;
    Locate 2, 1: Print timelimit - Int(Timer - gametime);
    _Display
    _Limit 30

    ' game over ?
    If curBall > 15 Then ' success
        Play "o2l16cegagfefgabgc3l4"
        _Delay 2
        GoTo restart
    ElseIf Timer - gametime > timelimit Then ' fail
        Play "mbo1l4dl8ddl4dl8feeddc#l2d"
        _Delay 2
        GoTo restart
    End If
Loop

Sub drawBall (x, y, r, c As _Unsigned Long)
    Dim rred As Long, grn As Long, blu As Long, rr As Long, f
    rred = _Red32(c): grn = _Green32(c): blu = _Blue32(c)
    For rr = r To 0 Step -1
        f = 1 - rr / r
        fcirc x, y, rr, _RGB32(rred * f, grn * f, blu * f)
    Next
End Sub

Sub fcirc (CX As Integer, CY As Integer, R As Integer, C As _Unsigned Long)
    Dim Radius As Integer, RadiusError As Integer
    Dim X As Integer, Y As Integer
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub

Sub Text (x, y, textHeight, K As _Unsigned Long, txt$)
    Dim fg As _Unsigned Long, cur&, I&, multi, xlen
    fg = _DefaultColor
    cur& = _Dest
    I& = _NewImage(8 * Len(txt$), 16, 32)
    _Dest I&
    Color K, _RGBA32(0, 0, 0, 0)
    _PrintString (0, 0), txt$
    multi = textHeight / 16
    xlen = Len(txt$) * 8 * multi
    _PutImage (x, y)-Step(xlen, textHeight), I&, cur&
    Color fg
    _FreeImage I&
End Sub
b = b + ...
Reply
#6
OK now as your wins out number your losses more balls will be drawn into the background making it more difficult to find the slowest moving balls, plus the code is made more efficient by not redrawing background every loop, just _PutImage.
Code: (Select All)
_Title "Click Away Balls" ' 2022-05-13 needs arial.ttf font
' new: speed increases, added timer by Dav, DEC/2020
' 2022-05-13 fix so that lowest balls are drawn, overhaul code b+
' 2022-05-14 draw background once to an image, add balls in that image according to # wins over losses

' ===========================================================================================================

'       Click on balls in order, starting at 1 until all gone, before the timer runs out.

'        Hints: the lower the ball # the slower it moves, click into place ball is moving

' ===========================================================================================================

Randomize Timer
Screen _NewImage(800, 600, 32)
_Delay .25
_ScreenMove _Middle
_PrintMode _KeepBackground

balls = 15: size = 40: speed = 3
Dim BallX(balls), BallY(balls), BallDx(balls), BallDy(balls), BallSize(balls), BallShow(balls), BallC(balls) As _Unsigned Long
w = _Width: h = _Height: w2 = _Width / 2: h2 = _Height / 2

restart:

'Generate random ball data
For B = balls To 1 Step -1
    BallSize(B) = 40 + (Rnd * 30)
    BallX(B) = BallSize(B) + Rnd * (w - 2 * BallSize(B))
    BallY(B) = BallSize(B) + Rnd * (h - 2 * BallSize(B))
    a = Rnd * _Pi(2): Ballspeed = 2 + B
    BallDx(B) = Ballspeed * Cos(a)
    BallDy(B) = Ballspeed * Sin(a)
    BallShow(B) = 1
    BallC(B) = _RGB32(100 + Rnd * 150, 100 + Rnd * 150, 100 + Rnd * 150)
Next
If back& Then _FreeImage back&
back& = _NewImage(w, h, 32)
For x = 0 To w Step 4
    For y = 0 To h Step 4
        r = Sin(1.1 * t) * h2 - y + h2
        Line (x, y)-Step(3, 3), _RGB(r, r - y, -r), BF
    Next
t = t + .007  ' <<<<<<<<<<<< put this back in so the background is shaped
Next
For i = 1 To wins
    rx = Rnd * w: ry = Rnd * h: rr = 40 + (Rnd * 30)
    drawBall rx, ry, rr, _RGB32(Rnd * 155 + 100, Rnd * 155 + 100, Rnd * 155 + 100)
    Text rx - 15, ry - 15, 30, &HFFFFFFFF, Right$("0" + _Trim$(Str$(i + 15)), 2)
Next
_PutImage , 0, back&

' initialize
curBall = 1: gametime = Timer: timelimit = 35
Do
    Cls
    'compute ball movement
    For t = balls To 1 Step -1
        BallX(t) = BallX(t) + BallDx(t) 'move ball then make sure in bounds
        BallY(t) = BallY(t) + BallDy(t)
        If BallX(t) > w - BallSize(t) Then BallDx(t) = -BallDx(t): BallX(t) = w - BallSize(t)
        If BallX(t) < BallSize(t) Then BallDx(t) = -BallDx(t): BallX(t) = BallSize(t)
        If BallY(t) > h - BallSize(t) Then BallDy(t) = -BallDy(t): BallY(t) = h - BallSize(t)
        If BallY(t) < BallSize(t) Then BallDy(t) = -BallDy(t): BallY(t) = BallSize(t)
    Next

    ' curBall clicked
    While _MouseInput: Wend
    mb = _MouseButton(1): mx = _MouseX: my = _MouseY
    If mb Then
        If Sqr((mx - BallX(curBall)) ^ 2 + (my - BallY(curBall)) ^ 2) < BallSize(curBall) Then
            BallShow(curBall) = 0
            Play "mbl32o2ceg"
            curBall = curBall + 1
        End If
    End If

    'draw all stuff
    _PutImage , back&, 0
    For i = balls To 1 Step -1
        If BallShow(i) = 1 Then
            drawBall BallX(i), BallY(i), BallSize(i), BallC(i)
            Text BallX(i) - 15, BallY(i) - 15, 30, &HFFFFFFFF, Right$("0" + _Trim$(Str$(i)), 2)
        End If
    Next
    Locate 1, 1: Print "Click ball.."; curBall;
    Locate 2, 1: Print timelimit - Int(Timer - gametime);
    _Display
    _Limit 30

    ' game over ?
    If curBall > 15 Then ' success
        wins = wins + 1
        Play "o2l16cegagfefgabgc3l4"
        _Delay 2
        GoTo restart
    ElseIf Timer - gametime > timelimit Then ' fail
        wins = wins - 1
        Play "mbo1l4dl8ddl4dl8feeddc#l2d"
        _Delay 2
        GoTo restart
    End If
Loop

Sub drawBall (x, y, r, c As _Unsigned Long)
    Dim rred As Long, grn As Long, blu As Long, rr As Long, f
    rred = _Red32(c): grn = _Green32(c): blu = _Blue32(c)
    For rr = r To 0 Step -1
        f = 1 - rr / r
        fcirc x, y, rr, _RGB32(rred * f, grn * f, blu * f)
    Next
End Sub

Sub fcirc (CX As Integer, CY As Integer, R As Integer, C As _Unsigned Long)
    Dim Radius As Integer, RadiusError As Integer
    Dim X As Integer, Y As Integer
    Radius = Abs(R): RadiusError = -Radius: X = Radius: Y = 0
    If Radius = 0 Then PSet (CX, CY), C: Exit Sub
    Line (CX - X, CY)-(CX + X, CY), C, BF
    While X > Y
        RadiusError = RadiusError + Y * 2 + 1
        If RadiusError >= 0 Then
            If X <> Y + 1 Then
                Line (CX - Y, CY - X)-(CX + Y, CY - X), C, BF
                Line (CX - Y, CY + X)-(CX + Y, CY + X), C, BF
            End If
            X = X - 1
            RadiusError = RadiusError - X * 2
        End If
        Y = Y + 1
        Line (CX - X, CY - Y)-(CX + X, CY - Y), C, BF
        Line (CX - X, CY + Y)-(CX + X, CY + Y), C, BF
    Wend
End Sub

Sub Text (x, y, textHeight, K As _Unsigned Long, txt$)
    Dim fg As _Unsigned Long, cur&, I&, multi, xlen
    fg = _DefaultColor
    cur& = _Dest
    I& = _NewImage(8 * Len(txt$), 16, 32)
    _Dest I&
    Color K, _RGBA32(0, 0, 0, 0)
    _PrintString (0, 0), txt$
    multi = textHeight / 16
    xlen = Len(txt$) * 8 * multi
    _PutImage (x, y)-Step(xlen, textHeight), I&, cur&
    Color fg
    _FreeImage I&
End Sub

EDIT: added a t increaser when making the background so more shaped as Dav originally had.
b = b + ...
Reply
#7
Nice work!  I'm still not good at the game though, lol. 

I especially like the compact text sub.

- Dav

Find my programs here in Dav's QB64 Corner
Reply




Users browsing this thread: 4 Guest(s)