POINT

The POINT function returns the pixel COLOR attribute at a specified graphics coordinate or the current graphic cursor position.

Color

Syntax

color_attribute% = POINT (column%, row%)

Graphic cursor position

Syntax

pointer_coordinate% = POINT({0|1|2|3})

Parameters

Graphic Color syntax:

• The INTEGER column and row coordinates designate the pixel position color on the screen to read.
• The return value is an INTEGER palette attribute value or an _UNSIGNED LONG _RGBA 32 bit value in QB64.

Graphic cursor position syntax:

• The INTEGER position number can be 0 to 3 depending on the cursor position desired:
  • POINT(0) returns the current graphic cursor SCREEN column pixel coordinate.
  • POINT(1) returns the current graphic cursor SCREEN row pixel coordinate.
  • POINT(2) returns the current graphic cursor WINDOW column position.
  • POINT(3) returns the current graphic cursor WINDOW row position.
• If a WINDOW view port has not been established, the coordinate returned will be the SCREEN cursor pixel position.
• The return value is the current graphic cursor column or row pixel position on the SCREEN or WINDOW.
• Graphic cursor positions returned will be the last ones used in a graphic shape such as a CIRCLE center point.

Usage:

• Use _SOURCE first to set the image handle that POINT should read or QB64 will assume the current source image.

_SOURCE 0 'sets POINT to read the current SCREEN image after reading a previous source image

• POINT cannot be used in SCREEN 0! Use the SCREEN function to point text character codes and colors in SCREEN 0.

POINT in QBasic Legacy Graphic SCREEN Modes:

• The INTEGER color attributes returned are limited by the number of colors in the legacy SCREEN mode used.
• Column and row INTEGER parameters denote the graphic pixel coordinate to read.
• In QB64 the offscreen or off image value returned is -1. Use IF POINT(x, y) <> -1 THEN...
• In QBasic the coordinates MUST be on the screen or an Illegal Function Call error will occur.

POINT in QB64 32 Bit Graphic _NEWIMAGE or _LOADIMAGE Modes:

• Returns _UNSIGNED LONG 32 bit color values. Use _UNSIGNED values when you don't want negative values.
• _UNSIGNED LONG variables should be used when comparing POINT returns with _RGB or _RGB32 _ALPHA bit values
• Convert 32 bit color values to RGB intensities(0 to 255) using the _RED32, _GREEN32 and _BLUE32 functions.
• To convert color intensities to OUT &H3C9 color port palette intensity values divide the values of 0 to 255 by 4.
• Use the _PALETTECOLOR (function) to convert color port palette intensities in 32 bit modes.

Example 1: How _RGB 32 bit values return DOUBLE or _UNSIGNED LONG values in QB64.

DIM clr AS LONG 'DO NOT use LONG in older versions of QB64 (V .936 down) SCREEN _NEWIMAGE(640, 480, 32) CLS , _RGB(255, 255, 255) 'makes the background opaque white PRINT "POINT(100, 100) ="; POINT(100, 100) clr = POINT(100, 100) PRINT "Variable clr = "; clr IF clr = _RGB(255, 255, 255) THEN PRINT "Long OK" IF POINT(100, 100) = _RGB(255, 255, 255) THEN PRINT "_RGB OK" IF POINT(100, 100) = clr THEN PRINT "Type OK" 'will not print with a LONG variable type

Note: Change the DIM clr variable type to LONG to see how the last IF statement doesn't PRINT as shown in the output below:

POINT(100, 100) = 4294967295 Variable clr = -1 Long OK _RGB OK

Example 2: Using a POINT mouse routine to get the 32 bit color values of the image.

SCREEN _NEWIMAGE(640, 480, 32) _TITLE "Mouse POINTer 32" 'LINE INPUT "Enter an image file: ", image$ 'use quotes around file names with spaces image$ = "QB64bee.png" 'any 24/32 bit image up to 320 X 240 with current _PUTIMAGE settings i& = _LOADIMAGE(image$, 32) IF i& >= -1 THEN BEEP: PRINT "Could NOT load image!": END w& = _WIDTH(i&): h& = _HEIGHT(i&) PRINT "Make background transparent?(Y\N)"; BG$ = UCASE$(INPUT$(1)) PRINT BG$ _DELAY 1 'CLS 'commented to keep background alpha 0 IF BG$ = "Y" THEN _CLEARCOLOR _RGB32(255, 255, 255), i& 'make white Background transparent _PUTIMAGE (320 - w&, 240 - h&)-((2 * w&) + (320 - w&), (2 * h&) + (240 - h&)), i&, 0 _FREEIMAGE i& _MOUSEMOVE 320, 240 'center mouse pointer on screen DO: _LIMIT 100 DO WHILE _MOUSEINPUT mx = _MOUSEX my = _MOUSEY c& = POINT(mx, my) r = _RED32(c&) g = _GREEN32(c&) b = _BLUE32(c&) a = _ALPHA32(c&) LOCATE 1, 1: PRINT mx; my, "R:"; r, "G:"; g, "B:"; b, "A:"; a; " " LOCATE 2, 2: PRINT "HTML Color: &H" + RIGHT$(HEX$(c&), 6) LOOP LOOP UNTIL INKEY$ > "" END

Code by Ted Weissgerber

Explanation: Use the mouse pointer to get the background RGB of the image to make it transparent with _CLEARCOLOR.

Snippet: Creating an image mask to PUT an image over other colored backgrounds. See: GET and PUT Demo to run code.

FOR c = 0 TO 59 '60 X 60 area from 0 pixel FOR r = 0 TO 59 IF POINT(c, r) = 0 THEN PSET (c, r), 15 ELSE PSET (c, r), 0 NEXT r NEXT c GET(0, 0)-(60, 60), Image(1500) ' save mask in an array(indexed above original image).

Explanation: In the procedure all black areas(background) are changed to white for a PUT using AND over other colored objects. The other image colors are changed to black for a PUT of the original image using XOR. The array images can be Template:KWd for later use. QB64 can also PUT a full screen 12 image from an array directly into a BINARY file.

See Examples:

• SAVEIMAGE (QB64 Image to Bitmap SUB by Galleon)

• Program ScreenShots (Member program for legacy screen modes)

• ThirtyTwoBit SUB (QB64 Image area to bitmap)

• ThirtyTwoBit MEM SUB (Fast image area to Bitmap using _MEM)

See also:

• _NEWIMAGE, _LOADIMAGE (see 32 bit modes)
• _MEMIMAGE, _MEMGET
• PSET, PRESET
• SCREEN, SCREEN (function) (text pointer function)
• GET (graphics statement), PUT (graphics statement)
• Bitmaps, Creating Sprite Masks, Text Using Graphics (Demo)

---

Navigation: Main Page with Articles and Tutorials Keyword Reference - Alphabetical Keyword Reference - By usage Report a broken link